"this computer has not reported status yet"
I am trying to configure the SC 2012 R2 ConfigMgr to deploy Endpoint to our client computers and replace the old WSUS server.
I have created a boundary based on IP range (so that it does not mess with the other computers until we retire the old WSUS) and two boundary groups (one for content location and one for site assignment).
The ConfigMgr (device collections) "knows" the OU for the test computers. When I go to assets & compliance \ overview \ devices, I can see the computers from the OU : site code is correct, client is "no" and client type is "none".
The Update Services console "sees" the computer (correct name, correct IP) but the status remains at "not yet reported".
I had to mannually install the client agent from \\sccmserver\sms_site\client. According to Update Services, the server version is 6.3.9600.16384. According to WindowsUpdate.log on the client computer, Client version is Core : 7.9.9600.16422 & Aux :
7.9.9600.16384.
Any suggestion for my next move ?
THX
Hi,
---> Warning: no remote client installation account found
Have you added the Client Push Installation accounts?
Some more troubleshooting links:
http://deployos.com/blog/2012/10/01/using-and-troubleshooting-client-push-in-sccm
http://eskonr.com/2010/11/sccm-client-installation-troubleshooting-steps-check-list/
http://blogs.technet.com/b/configurationmgr/archive/2009/08/10/troubleshooting-issues-where-clients-are-not-reporting.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
WSUS - "this computer has not reported status yet" Windows server 2003
I just did a successful installation of wsus 3.0 Sp2
I am able to see all the machines but the issue starts there
Each of the machine show this error " this computer has not reported status yet"
i have tried but hasnt manage to resolve this issue
kindly guide me on how i can resolve it
thx2013-06-26 14:20:36:633
644 478
AU ## END ## AU: Search for updates [CallId = {4E48EF51-0D7C-458A-A575-9BA1B4799175}]
2013-06-26 14:20:36:633
644 478
AU #############
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:36:634
644 478
AU AU setting next detection timeout to 2013-06-26 16:20:36
2013-06-26 14:20:36:634
644 478
AU Setting AU scheduled install time to 2013-06-27 00:00:00
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:41:581
644 1338
Report REPORT EVENT: {8DFBD635-02A8-4773-9DF8-80880752189A}
2013-06-26 14:20:36:577+0300 1
148 101
{D67661EB-2423-451D-BF5D-13199E37DF28}
1 800b0001
SelfUpdate Failure
Software Synchronization Windows Update Client failed to detect with error 0x800b0001.
2013-06-26 14:20:41:621
644 1338
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-06-26 14:20:41:621
644 1338
Report WER Report sent: 7.6.7600.256 0x800b0001 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2013-06-26 14:20:41:621
644 1338
Report CWERReporter finishing event handling. (00000000)
2013-06-26 14:22:41:605
644 1338
Report Uploading 1 events using cached cookie, reporting URL = http://NTKE01/ReportingWebService/ReportingWebService.asmx
2013-06-26 14:22:41:612
644 1338
Report Reporter successfully uploaded 1 events.
2013-06-26 15:25:02:219
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:25:02:219
644 13d0
AU Triggering Online detection (non-interactive)
2013-06-26 15:25:02:220
644 718
AU #############
2013-06-26 15:25:02:220
644 718
AU ## START ## AU: Search for updates
2013-06-26 15:25:02:220
644 718
AU #########
2013-06-26 15:25:02:221
644 718
AU <<## SUBMITTED ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:25:02:221
644 179c
Agent *************
2013-06-26 15:25:02:221
644 179c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-06-26 15:25:02:221
644 179c
Agent *********
2013-06-26 15:25:02:221
644 179c
Agent * Online = Yes; Ignore download priority = No
2013-06-26 15:25:02:222
644 179c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-06-26 15:25:02:222
644 179c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-06-26 15:25:02:222
644 179c
Agent * Search Scope = {Machine}
2013-06-26 15:25:02:242
644 179c
Setup Checking for agent SelfUpdate
2013-06-26 15:25:02:242
644 179c
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2013-06-26 15:25:06:522
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-06-26 15:25:06:530
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:06:533
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-06-26 15:25:06:558
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:08:643
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-06-26 15:25:08:647
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:08:700
644 179c
Setup Determining whether a new setup handler needs to be downloaded
2013-06-26 15:25:08:700
644 179c
Setup SelfUpdate handler is not found. It will be downloaded
2013-06-26 15:25:08:700
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:376
644 179c
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:376
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:388
644 179c
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:388
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:406
644 179c
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:406
644 179c
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-06-26 15:25:09:466
644 179c
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-06-26 15:25:09:466
644 179c
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://NTKE01/ClientWebService/client.asmx
2013-06-26 15:25:09:536
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:25:09:536
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:25:09:536
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:25:17:456
644 179c
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2013-06-26 15:25:17:456
644 179c
PT WARNING: SOAP Fault: 0x00012c
2013-06-26 15:25:17:457
644 179c
PT WARNING: faultstring:Fault occurred
2013-06-26 15:25:17:457
644 179c
PT WARNING: ErrorCode:ConfigChanged(2)
2013-06-26 15:25:17:457
644 179c
PT WARNING: Message:(null)
2013-06-26 15:25:17:457
644 179c
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2013-06-26 15:25:17:457
644 179c
PT WARNING: ID:78fa31e8-8714-47b9-8ae3-182ecb2d9f74
2013-06-26 15:25:17:477
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:25:17:477
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:25:17:477
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:27:50:499
644 718
AU AU received policy change subscription event
2013-06-26 15:31:23:807
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:31:23:807
644 13d0
AU Piggybacking on an AU detection already in progress
2013-06-26 15:31:27:317
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:31:27:317
644 13d0
AU Piggybacking on an AU detection already in progress
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncUpdates failure, error = 0x8024400A, soap client error = 10, soap error code = 0, HTTP status code = 200
2013-06-26 15:36:56:942
644 179c
PT WARNING: PTError: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncUpdates_WithRecovery failed.: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: Sync of Updates: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncServerUpdatesInternal failed: 0x8024400a
2013-06-26 15:36:56:942
644 179c
Agent * WARNING: Failed to synchronize, error = 0x8024400A
2013-06-26 15:36:56:943
644 179c
Agent * WARNING: Exit code = 0x8024400A
2013-06-26 15:36:56:943
644 179c
Agent *********
2013-06-26 15:36:56:943
644 179c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-06-26 15:36:56:943
644 179c
Agent *************
2013-06-26 15:36:56:943
644 179c
Agent WARNING: WU client failed Searching for update with error 0x8024400a
2013-06-26 15:36:56:959
644 8dc
AU >>## RESUMED ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:36:56:959
644 8dc
AU # WARNING: Search callback failed, result = 0x8024400A
2013-06-26 15:36:56:959
644 8dc
AU # WARNING: Failed to find updates with error code 8024400A
2013-06-26 15:36:56:959
644 8dc
AU #########
2013-06-26 15:36:56:959
644 8dc
AU ## END ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:36:56:959
644 8dc
AU #############
2013-06-26 15:36:56:959
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:36:56:959
644 8dc
AU AU setting next detection timeout to 2013-06-26 17:36:56
2013-06-26 15:36:56:959
644 8dc
AU Setting AU scheduled install time to 2013-06-27 00:00:00
2013-06-26 15:36:56:959
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:36:56:960
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:37:01:943
644 179c
Report REPORT EVENT: {48D1738E-F97A-45A4-8AB5-ECBE8FBDDF8F}
2013-06-26 15:36:56:943+0300 1
148 101
{00000000-0000-0000-0000-000000000000}
0 8024400a
AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x8024400a.
2013-06-26 15:37:01:950
644 179c
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-06-26 15:37:01:950
644 179c
Report WER Report sent: 7.6.7600.256 0x8024400a 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2013-06-26 15:37:01:951
644 179c
Report CWERReporter finishing event handling. (00000000)
2013-06-26 15:39:01:979
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:39:01:979
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:39:01:979
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:39:02:302
644 179c
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2013-06-26 15:39:02:302
644 179c
PT WARNING: SOAP Fault: 0x00012c
2013-06-26 15:39:02:302
644 179c
PT WARNING: faultstring:Fault occurred
2013-06-26 15:39:02:302
644 179c
PT WARNING: ErrorCode:ConfigChanged(2)
2013-06-26 15:39:02:302
644 179c
PT WARNING: Message:(null)
2013-06-26 15:39:02:302
644 179c
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2013-06-26 15:39:02:302
644 179c
PT WARNING: ID:38d9b059-92f2-4248-9a71-be1e33841fcb
2013-06-26 15:39:02:311
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:39:02:311
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:39:02:311
644 179c
PT Server URL =
AS you can see the log file is bigggggg..
pls advise -
This computer has not had a successful backup recently
Despite the above mentioned critical notification in Health Monitioring, all other indications state that backups have been successful. This warning has only started appearing since I reconnected the client machines to the server. Any idea on how to fix?
Have disabled client backups and re-enabled them to no avail....Hi TinkererNZ,
Would you let me confirm whether you can back up successfully when this warning persists? Please let me know
if have installed some third-party protection programs. Such as Symantec or McAfee protection. If installed, please temporarily disable them and firewall, then check if the warning still exists.
Please open
Run and type services.msc, then click OK. In Services, please navigate to
Volume Shadow Copy service and check if this service is started.
Meanwhile, please refer to the following operations and check COM access permissions.
Open
Run and type dcomcnfg, then click OK. The Component Services will appear.
In the left panel, expand the Component Services section, and then expand the Computers section.
My Computer option will appear.
Please right click
My Computer and select Properties.
In
My Computer Properties, please select COM Security tab. Under
Access Permissions, please click “Edit Default…” button.
Under
Group or user names, please add NETWORK SERVICE
and then click OK.
Then please monitor the result.
In addition, please navigate to the path in Registry Editor: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VSS\VssAccessControl
Please check the value of “NT Authority\NetworkService” was set to
1.
Regarding to Event ID 8194, please refer to the following article.
Event ID 8194 — Volume Shadow Copy Service Operations
http://technet.microsoft.com/en-us/library/dd364922(v=WS.10).aspx
Hope this helps.
Best regards,
Justin Gu -
i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
or pen drive. I have a HP pavilion dv4 series notebook. the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
in device status is says: Windows has stopped this device because it has reported problems. (Code 43)
location: Port_#0002.Hub_#0005
driver provider: microsoft
date of driver: 21-06-2006
driver version: 6.1.7600.16385
HELP!!!!!!!!!!!Hi ameet2005,
Please check if the following suggestions help:
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If the issue persists, please check if it can be resolved by running
System File Checker.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?
Hi Dave_warr,
I would suggest restarting the iPad and see if the download resumes.
iTunes: How to resume interrupted iTunes Store downloads
Resuming downloads from an iOS device
From the Home screen, tap the iTunes icon.
For iPhone/iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password.
Click the "OK" button.
Click the Resume or Resume All button to start the download.
If you don't see the application to download it, then follow these troubleshooting steps:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If the app does not appear in your list of purchases, then contact the iTunes Store for help:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
I hope this information helps ....
Have a great day!
- Judy -
I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?
I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who! -
Hi,
I have this printer HP Laser M1522nf.It was working fine till today.Suddenly it has started giveng this error
"HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctioned"
This error is not on printer but on my computer when I connect the printer USB cable.I have 3 laptops all have winxp installed on them.I have tried connecting the printer with all laptops and they all give the same error with reference to connecting usb printer cable and Malfunctioning.
Appreciate your gracious advice and guidance in this regard,
Many thanksIs this at an office and you are logged in not as an administrator?
If that's not the case, then the message maybe true, that it did malfunction, and need to be serviced. (assuming you already tried power cycle the printer, making sure doors/trays are all properly put in.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!*** -
I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help
iOS: Unable to update or restore
Read the article Put it in recovery mode -
i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please
Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/ -
My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-( it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks
As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock -
when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me
I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps -
i have an ipod nano 7th gen and when i plug it in for itunes my computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?
As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock -
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.
Maybe you are looking for
-
Plugged my Ipod shuffle (512mb) into my USB to charge for the 1st time and it blinks for about 10 seconds....it stops blinking or charging after I start using the computer...any ideas what i am doing wrong?
-
When I try to download an app it won't accept the password I created when setting up my Apple ID. I've been back into my account and re-confirmed my password but still it won't accept it. Any ideas??
-
Travel expense accounting program
hi all I need to ask about travel expense accounting program. The standard feature TRVPA does not have "expense type". The requirement is to settle trips based on expense type, any idea how this can be achieved by user exits or other features?
-
Function Module to delete all the red requests in Info Cube
Dear Friends, Is there any standard FM which can delete all the red requests in the infocube ? Thanks & Regards, Ashutosh Singh
-
i created a new block within an existing form in oracle apps. when i create new record and save its working fine, when i try to insert the same data through a procedure with the insert statement directly into the database and try to query it says the