"This device is not configured correctly: Code 1"?

I have a brand-new iPhone 5c and every time I try to repair the connection between my phone and my computer, I get the message "This device is not configured correctly (Code 1)."
What on earth does this mean, and how can I fix it?
Thanks.

Then we simply will not tell you anything.
Good luck.
FYI, making such statements is a good way to be either ignored or get snarky responsed.  We are users like yourself.  Leave the attitude out.

Similar Messages

  • Emu 1616m pcmcia cardbus driver installation errors: this device is not config correctly (code1)

    Hi, can anyone help, I use a 1616m pcmcia card bus in my dell inspiron laptop, its been working fine no errors for the last year, then suddenly today, I go to use it and no sound, and my DSP reds out, and it states my hardware or drivers my need re-installing. So I have un-installed all software, drivers etc, Then when I insert the pcmcia card bus in, it reconizes it, found new hardware, I tell it to use the driver disc. This is ok, its installing the software, then I get the blue screen of death, crash!. Iv tried it countless times, clearing the registy etc, but if I dont get the blue screen I get an error that my hardware may not work properly blah blah and this error: e-mu e-dsp audio processor (wdm) this device is not configured correctly (code 1).
    Do I have to factory reset my laptop and reload everything, days of fun.
    Has my well looked after pcmcia card bus broken, just after the year is up!! the irony
    Are there better pcmcia controller drivers than: ricoh r5c475(ii) and would they help this issue
    does anyone have any ideas please!!

    Upon latest reboot, I also received this error message:  "The application failed to initialize properly (0xc0000005).  Click OK to terminate the application."
    Then I got the iTunesHelper not installed correctly error again.
    Then the "Windows can't check for updates" error message.
    Then "Apple Push has stopped working."  Then a quick DEP error message that disappeared but said something about Apple Push being closed.
    I'm also getting denials of service logged by McAffee.  Not sure if I'm getting a virus/attack or not.
    Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
    Thank you for your help!
    Tristan

  • Officejet Pro 8600 Premium error message The drivers for this device are not installed. Code 28

    Printer : Officejet Pro 8600 Premium. model CN577A
    OS : Microsoft Windows 7 Home
    Basic 64
    How is your product connected to your PC? : Network
    Problem description : In Device Manager I've got an error message with the
    Officejet pro 8600 icon - "The drivers for this device are not installed.
    (Code 28)
    There is no driver selected for the device information set or element." I
    have uninstalled and re-installed the driver to no effect. The printer
    appears to be functioning properly.
    This question was solved.
    View Solution.

    Hello, 
    Yes, i too would suggest a clean re-installation of the software.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • I'm trying to activate my new iphone 4 and it says that the device is not configured correctly.  Can I fix this?.

    I am not able to activate my new phone, it says that the phone configuration is incorrect.  Can I fix this problem?

    Do you have a SIM in the iPhone?

  • I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    The TIme Machine volume does not have that checkbox.
    I think the issue is with your Finder...
    Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then, restart, or log out and in again.
    (You will have to reset a few finder prefs the way you like them.)

  • Guest variable 'guest info.return_code' not configured correctly.

    Hi,
    I'm converting a SQL Server 2012 from Base DBVM to Base DB Template. After a while working on the conversion I get this error:
    "Guest variable 'guest info.return_code' not configured correctly."
    If I double-click the error I get the following message: "Cannot get detail information for the specified resource bundle."
    I'd really appreciate if anyone can help with the issue.
    Regards
    Fernando

    carlasummers wrote:
    ...Error: variable hourlyRate might not have been inialized and variable hoursWorked might not have been inialized. ....Haven't read your code, but whenever I see an error like this, I find that usually correcting what it tells me to correct helps: initialize the variables.
    i.e.,:
        double hoursWorked = 0.0;
        double hourlyRate = 0.0;
        double weeklyPay = 0.0;also: never use float when you can use double (there are exceptions but they are few).
    also: You need to get the employee name within the loop. Also it would help to add the prompt: "enter \"stop\" to quit" or something of that nature. Assume that the users of your program are idiots.
    Also, when posting code here, please use code tags so that your code will retain its formatting and thus will be readable -- after all, your goal is to get as many people to read your post and understand your code as possible, right?
    To do this, highlight your pasted code (please be sure that it is already formatted when you paste it into the forum; the code tags don't magically format unformatted code) and then press the code button, and your code will have tags.
    Another way to do this is to manually place the tags into your code by placing the tag [code] above your pasted code and the tag [code] below your pasted code like so:
    [code]
      // your code goes here
      // notice how the top and bottom tags are different
    [/code]Best of luck.
    Edited by: Encephalopathic on Apr 25, 2009 6:56 AM

  • Lookup Query error: "Lookup properties not configured correctly"

    Hi!
    I have come up with some problems on configuring lookup query.
    I get this error: "Lookup properties not configured correctly" on admin console-->user-->manage-->selecting the user-->Resource profile-->edit the process form
    I created a table called "test_lookup" with the following columns: Oraganization, division and position (all varchars) in the database.
    For Lookup Query:
    This were the steps done on design console -->form designer-->properties tab:
    On " Grupo(lookupfied) " I set the following properties:
    Column widths = 100
    Lookup Query = select Organization from test_lookup
    Lookup Column Name = Grupo_teste
    Column Caption = Organization
    Column Names = Grupo_teste
    On design console for Lookup definiton I set the following:
    code: Lookup.KON.Grupo_teste
    field: Grupo_teste
    Lookup type: checked
    Required: uncheked
    Code key | Decode Key
    Organization Organization
    Any idea why this is hapenning? Any suggestion is more than welcome!
    Thank you.
    Kind Regards,
    Kon

    Refer this:
    User list lookup
    Column Names = usr_key,usr_first_name,usr_last_name
    Lookup Column Name = usr_key
    Lookup Query = Select usr_key, usr_first_name, usr_last_name from usr //(where act_key=123)
    Column Captions = User Key,First Name,Last Name
    Column Widths = 10,100,100
    Have you tried this:
    b)Select ACT_KEY from USR where USR_LOGIN = '$Requester Information.User Login$'
    In lookup coloumn name=act_key
    In coloumn width =100
    In coloumn names=act_key
    in coloumn caption =Organization Key

  • ISE 1.2 Guest Portal - This device has not been registered.

    I have setup and SSID on my WLC. I got the redirecting to my ISE guestportal working.
    However when I sign in I get a Device regitration Page
    "This device has not been registered"
    Unable to obtain the user information needed for network access.
    The device ID is grayed out and blank.
    Any assistance in this matter would be greatly appreciated

    Thanks Johnston,
    P.S for those who needs the path ISE 1.2 Administration -> Web Portal Management -> Settings -> Multi-Portal Configurations -> DefaultGuestPortal -> Operations.
    On another note
    When I login - I get my acceptable usage policy.
    Accept
    Then get a Device registration Portal where I can add the MAC address.
    Now I have two quistions.
    When I add my test mac address the url redirects to myservername:8443/guestportal/AfterDevReg.action - unable to connect <- that's the one issue.
    The other is - Can't I by pass the MAC? ie once the user is signed on to get access.
    Curretly I have the following settings enabled.
    Enable Mobile Portal
    Allow guest users to change password
    Guest users should be allowed to do device registration <- if I disable that after signon the page just flash back to the guest portal.

  • PerformancePoint Services is not configured correctly but I'm Site administrator

    Hi experts
    I recenlty create a business intelligence site and set my active directory user as administrator.
    I'm server and database administrator too.
    but when I want to create a data source I get this error:
    The Data source cannot be used because PerformancePoint Services is not configured correctly
    I see some solution in then interent but some of them say that should set unattended user for performance point service.
    I'm site administrator and Why I should set unattended user?
    thanks
    semi developer

    You should set the Unattended Execution Account if you don't want to set credentials for data sources.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • Central Web Authentication Fail - This device has not been registered.

    Dear All,
    I have problem when apply the cwa. i have wlc and ise,
    I want all user (all type device) that want access to my network by Wifi, will authenticated by AD.
    but user cant connect to network evenly only authenticate.
    My ISE Authorization rule:
    if
    (Wireless_MAB AND AD1:ExternalGroups EQUALS example.com/Users/Domain Users)
    Anyone, have experience like this before, please share..
    nb : my ise licese is Base Package
    Thanks!!

    I had follow the configuration guide from here:
    http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml
    but, my authentication always fail with redirect to device registration,
    when user connect the ssid and input the username and password based on active directory,
    then browser will show up like this :
    1. Access with Windows :
    Device Registration
    This device has not been registered.
    You need to manually configure your device. Contact your system administrator for assistance.
    Your device configuration is not supported by the setup wizard.
    Device ID        : my-workstation-mac-address- 
    Description     :
    2. Access with Android
    Device Registration
    This device has not been registered.
    You need to manually configure your device. Contact your system administrator for assistance.
    Unsopported operating system type encountered.
    Device ID        : my-android-mac-address- 
    Description     :
    Thanks,

  • Lookup properties not configured correctly

    Hi,
    I have configured lookup query ,in which I am taking value from the RO form data like below.
    UD_IDMSP.UD_IDMSP_IDMS_VERSION = '$Form data.UD_IDMSRF_IDMS_VERSION$'
    Although the resuls are coming as expected I am getting "Lookup properties not configured correctly" this message in lookup popup window.
    Please provide some guidelines.
    Thanks,
    Pallavi

    Lookup Query :
    select distinct UD_IDMSP_IDMS_User_ID from UD_IDMSP where orc_key in (select orc_key from oiu where ost_key in (select ost_key from ost where ost_status in ('Provisioned', 'Enabled') and obj_key = (select obj_key from obj where obj_name = (select lkv_decoded from lkv where lku_key = (select lku_key from lku where LKU_TYPE_STRING_KEY = 'RETS.RODisplayName.Lookup') and lkv_encoded = 'IDMS'))) and UD_IDMSP.UD_IDMSP_IDMS_VERSION = '$Form data.UD_IDMSRF_IDMS_VERSION$')
    Lookup Column Name : UD_IDMSP_IDMS_User_ID
    Column Captions : User ID
    Column Names : UD_IDMSP_IDMS_User_ID
    Column width : 100
    This is all

  • Ocrcheck shows Device/File not configured

    Hi All,
    I'm new to RAC administration. I just found this command and try to run in my system and this is the output.
    ./ocrcheck
    Status of Oracle Cluster Registry is as follows :
    Version : 2
    Total space (kbytes) : 262120
    Used space (kbytes) : 8236
    Available space (kbytes) : 253884
    ID : 979000182
    Device/File Name : /u08/quorum/Quorum
    Device/File integrity check succeeded
    Device/File not configured
    Cluster registry integrity check succeeded
    What might have been wrong with the setup?
    I am using 10gR2 and Oracle Cluster file system 2 (ocfs2): ocfs2-2.6.9-42.ELsmp-1.2.4-2.x86_64
    running in 2.6.9-24-ELsmp RHEL4 AS OS.
    Any help will be appreciated.
    Thanks,
    Jay A

    oh ! sorry
    if you use Oracle Server - Enterprise Edition - Version: 10.2.0.3
    metalink Doc ID:     467216.1 Version: 10.2.0.3
    This problem can occur on any platform.
    # ocrconfig -replace ocr /dev/raw/raw4
    PROT-1: Failed to initialize ocrconfig
    ocrcheck
    Status of Oracle Cluster Registry is as follows :
    Version : 2
    Total space (kbytes) : 293640
    Used space (kbytes) : 4596
    Available space (kbytes) : 289044
    ID : 136413798
    Device/File Name : /dev/raw/raw1
    Device/File integrity check succeeded
    Device/File not configured
    Cluster registry integrity check succeeded Cause:
    ocrconfig -replace can't be used to replace the only online OCR disk
    As only 1 active OCR is available, -replace will not work.Solution:
    1. Add a mirror:
    #ocrconfig -replace ocrmirror /dev/raw/raw5
    2. Replace the OCR:
    #ocrconfig -replace ocr /dev/raw/raw4
    3. Remove the mirror /dev/raw/raw5
    #ocrconfig -replace ocrmirror

  • Satellite C50 - Secure Boot not configured correctly Build 9600

    Hi,
    Recently purchased a refurbished Toshiba Satellite C50 running windows 8.1 operating system. Was very pleased with it but found the message 'SecureBoot not configured correctly Build 9600' in a watermark in the bottom right corner of my desktop.
    Decided to search the internet for a resolution and after going on 3 troubleshooting sites, found out about the BIOS Setup required, however it warned that this was for advanced users who know their stuff about the technicalities of computers. Whilst I am computer literate, I'm not someone who likes to mess with the advanced options. Then, I stumbled across a reliable computer blog which had a detailed post on SecureBoot.
    ( Link to blog and specfic post:
    www.techrepublic.com/blog/windows-and-office/deal-with-the-secureboot-isnt-configured-correctly-watermark-in-windows-81/ )
    I thought this would resolve my issue, and I will admit it did help, telling me to use windows powershell as a precaution before using the BIOS setup. I was glad I did as it came back telling me that I have a non-production SecureBoot policy present on my laptop in which case I would have to ask for technical support for a system specific solution which would typically be a firmware update.
    I did try to phone, but the line was very busy and felt it might be easier to post this issue on a forum.
    If anyone has an answer please help as I really would like to enable SecureBoot if possible, as I believe computers should be set up with the best security options possible and it makes me feel comfortable knowing that it is set up securely.

    Someone commented the blog and posted this solution:
    The registry fix to remove the watermark is as follows.
    1. Start the Registry Editor with Admin rights (C:\Windows\regedit)
    2. Navigate to the following path
    -> HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Policies \ System.
    3. There, the two values " ConsentPromptBehaviorAdmin "and" EnableLUA "set to" 0 ".
    You can also try to enable the secure boot option in BIOS (in case its not already enabled)
    To get into the BIOS, press F2 while powering ON the unit.
    Additionally recommend checking this Microsoft page:
    http://windows.microsoft.com/en-us/windows-8/secure-boot-watermark

  • Enabling CredSSP Authentication Protocol - not configured correctly.

    Hello,
    I am trying to use CredSSP to delegate my user credentials to a server running Windows server 2012 to issue invoke-commands to a Network Storage Location.
    I have tried the following on the client machine:
    Ran these commands on an Administrative PowerShell (Windows 7):
    1) Enable-PSRemoting 
    2) winrm quickconfig
    3) Winrm set winrm/config/client '@{TrustedHosts="*.mydomain.com"}'
    4) Enable-WSManCredSSP -Role Client -Delegate *.mydomain.com
    5) PS C:\Windows\system32> Get-WSManCredSSP
        The machine is not configured to allow delegating fresh credentials.
        This computer is not configured to receive credentials from a remote client computer.
    Since it did not succeed I looked in the settings:
    1) Active Directory User and Computer -> [my computer] -> properties -> delegation tab. Changed "Do not trust this computer for delegation" to "Trust this computer for delegation to any service (Kerberos only).
    2) Local Group Policies Editor -> Computer Configuration -> Administrative Templates -> System -> Credentials Delegation
             - Double-Click the setting "Allow Delegating Fresh Credentials" made sure that it is enabled and click "Show".
    There              was WSMAN/*.mydomain.com in the list. 
             - I also enabled the setting "Allow Delegating Fresh Credentials with NTLM-only Server Authentication" as well but it  
             did not change the outcome. 
    3)  Local Group Policies Editor -> Computer Configuration
    -> Administrative Templates -> Windows Components ->      Windows Remote Management (WinrRM) -> WinRM client
             - Enabled the setting, "Allow CredSSP authentication".
    4)  Computer Configuration -> Windows Settings ->
    User Rights Assignment
             - Double-Click  the setting "Enable computer and user accounts to be trusted for delagation"
             - Added my user and computer to the delegation list.
    I re-ran the commands from above but still got the same output. 
    Is there a setting that I am missing? Is there any suggestion to change any settings? or just any ideas with regards to getting it to configure correctly.
    Thanks!

    Hello,
    I am trying to use CredSSP to delegate my user credentials to a server running Windows server 2012 to issue invoke-commands to a Network Storage Location.
    I have tried the following on the client machine:
    Ran these commands on an Administrative PowerShell (Windows 7):
    1) Enable-PSRemoting 
    2) winrm quickconfig
    3) Winrm set winrm/config/client '@{TrustedHosts="*.mydomain.com"}'
    4) Enable-WSManCredSSP -Role Client -Delegate *.mydomain.com
    5) PS C:\Windows\system32> Get-WSManCredSSP
        The machine is not configured to allow delegating fresh credentials.
        This computer is not configured to receive credentials from a remote client computer.
    Since it did not succeed I looked in the settings:
    1) Active Directory User and Computer -> [my computer] -> properties -> delegation tab. Changed "Do not trust this computer for delegation" to "Trust this computer for delegation to any service (Kerberos only).
    2) Local Group Policies Editor -> Computer Configuration -> Administrative Templates -> System -> Credentials Delegation
             - Double-Click the setting "Allow Delegating Fresh Credentials" made sure that it is enabled and click "Show".
    There              was WSMAN/*.mydomain.com in the list. 
             - I also enabled the setting "Allow Delegating Fresh Credentials with NTLM-only Server Authentication" as well but it  
             did not change the outcome. 
    3)  Local Group Policies Editor -> Computer Configuration
    -> Administrative Templates -> Windows Components ->      Windows Remote Management (WinrRM) -> WinRM client
             - Enabled the setting, "Allow CredSSP authentication".
    4)  Computer Configuration -> Windows Settings ->
    User Rights Assignment
             - Double-Click  the setting "Enable computer and user accounts to be trusted for delagation"
             - Added my user and computer to the delegation list.
    I re-ran the commands from above but still got the same output. 
    Is there a setting that I am missing? Is there any suggestion to change any settings? or just any ideas with regards to getting it to configure correctly.
    Thanks!
    See
    Secrets of Powershell Remoting book by Don Jones
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
    Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

  • Measurement Computing USB-SSR24 error 42 Digital Port not configured correctly for requested operation

    Using LV 2012 and ULx 2.02 LV driver:
    LV is throwing an error 42 (Digital Port not configured correctly for requested operation) from the ULx write VI but only on PortCH.  All my configurations are correct on the hardware and Instacal tests the ports OK.  I've reinstalled everything and still see the same issue.
    Since PortA is configured identical to PortCH, and PortA is functioning fine, I'm stumped.  This is occuring on two different SSR24 DAQs so I don't think it's the hardware, plus I've already mentioned that the Instacal isn't having a problem with it.
    I've attached my VI I'm using for debug. 
    Jeff
    Attachments:
    test of Wilmington.vi ‏19 KB

    I worked with Measurement Computing and they agreed that there is a bug with certain DI/DO configurations.  There are a possible 16 different DI/DO configurations with the hardware and apparently mine (PortA - DO, PortB- DI, PortCL-DI, and PortCH-DO will throw this error for PortCH.  I'm currently using .net calls to work around the issue until the ULx driver is updated.  I'll post that when I see it.  Attached are the .net VI's that I'm using for simple static IO.
    Attachments:
    USB SSR DOT NET Write Bit.vi ‏20 KB
    USB SSR DOT NET Read Bit.vi ‏21 KB

Maybe you are looking for