This device not supported on my new(ipad3 ?) ipad?
But it is!
I have a Apple device that plugs into my ipad/s and outputs a HDMI signal to my 32" monitor.
I bought it for my iPad 2. When using it on my iPad 3 or (whatever you want to call it) I get a msg.
This Accessory Not Supported, I then touch OK and the HDMI works and it charges at the same
time.
Bug?
Try cleaning your dock connector.
Similar Messages
-
How do I get my Ipod to play music videos through my theatre system? I keep getting the message "This device not supported". My theatre system WILL recognise my Iphone however. The theatre system, Ipod, and Iphone are all less than 4 months old. Any suggestions welcome!
Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.
-
Why does phone say "this device not supported" when charging
why does phone say "this device not supported" when charging?
If it is clean connect a 2nd accessory of the same kind to see if you need to replace the accessory or continue troubleshooting the phone.
-
Most of the question is in the discussion header. I have a Tango TRX bluetooth speaker that worked fine for three weeks with my third generation iPad. I started having trouble connecting and recieved the "not supported by iPad" message. It connects just fine until I open any app that requires sound and at thet point I recieve the message and the device disconnects. The Tango still pairs flawlessly with my laptop which is not an Apple product. How could a product suddenly become unsupported?
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer. -
"This device not supported" msg when connecting camera
I just tried plugging in my (four year old) Canon Digital Elph via the USB connector (30 pin male to USB female) and got the "device not supported" msg on my iPad2
Are only recent cameras supported?keyboardoperator wrote:
The camera connector I'm using is one I bought some years back to connect a camera to an iPod Photo. It looks to be the same as the current one, however.
Could this be a connector issue rather than a camera issue?
Yes, it's a connector issue. The connector you have doesn't work with the iPad, as you've discovered. It doesn't work with any iOS device. You need the iPad Camera Connector Kit. It has two different dongles, one to connect a USB cable, the other, an SD card. -
A friend of mine has an iMac running Tiger. He can use iPhoto to back up to DVD, but the same operation fails when using iTunes.
He selects a playlist, iTunes confirms it, a blank DVD is inserted and then the following messsage appears:
"This device is not supported for the requested burn operation"
Any ideas?
No answers found in past discussion or in apple support.
davidDavid:
I had a similar problem after installing a new superdrive in my G4 (the original optical drive just burned CDs). When I had the superdrive installed I was running 10.2. Eight months after having the drive installed I upgraded to 10.3.0. Then I got the message that the drive was not supported when trying to burn a CD. I then discovered that the DRIVE came with software and after checking the CD that came with the drive I found software for 10.2 and 10.3.2. I then installed the software for 10.3.2 and upgraded my operating system from 10.2.0 to 10.2.3. The drive's burning capability was restored. No more problems.
A friend of mine has an iMac running Tiger. He can
use iPhoto to back up to DVD, but the same operation
fails when using iTunes.
He selects a playlist, iTunes confirms it, a blank
DVD is inserted and then the following messsage
appears:
"This device is not supported for the requested burn
operation"
Any ideas?
No answers found in past discussion or in apple
support.
david -
Intermittently my iPhone doesn't recognize my ihome and it says"this device isn't supported by iPhone". This is so annoying, any suggestions?
Might be a dirty dock connector on your phone. Try gently brushing it with a clean, dry toothbrush and/or blowing on it with a can of compressed air.
-
IPhone 4 will not charge using apple charger displays this device not supported for charging
The iphone will connect to iTunes but will not charge with the charger or computer. It has been reset, and that didn't help.
Hey endifrommiami,
Check out the website link on my profile and then navigate to the products section of the site, there are solutions to fixing your specific charging iPhone problem there.
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
Fonefixer. -
My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?
Supported Bluetooth Profiles
It is not supposed to detect other Apple products via Bluetooth. -
PlayBook "This item not supported by your current device profile"
Hi I bought Blackberry Playbook before 1 week I update os and when i try to install any app like skype, viber, wechatt etc there is no download option.
when i open that aap in blackberry app world there is written "This item not supported by your current device profile" I am worry about it can some one help me please about it.
I am located in Dubai.
waiting for reply...
ThanksSkype is BB10 only, Playbook is on 2.1.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod -
i want to know how to get my bluetooth working with other phones please help as when i go to connect it says device not supported!!
The iPhone cannot connect to any other phone over Bluetooth.
The exception is other iOS devices in games and apps that have 'peer-to-peer' Bluetooth connectivity. -
This Accessory Not Supported: HDMI Adapter on iPad2
When I attach my Digital AV (HDMI) adapter to my iPad, an error message appears saying "This Accessory Not Supported". Is there a problem with the adapter? Or with my iPad.
For the 4G
Try:
- Reset the dock
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
For the iPhone, try another cable. -
This Accessory Not Supported by iPod Touch---Philips Dock
When I connect my iPod touch to my Philips dock, a window saying "This Accessory Not Supported by iPod Touch." The dock will no longer charge nor play music. It only started happening after the latest update.
For the 4G
Try:
- Reset the dock
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
For the iPhone, try another cable. -
I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?
Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it
Maybe you are looking for
-
I currently am using PPT to expose data from a Microsoft Analysis Server cube. The cube is wide open and requires no permissions to access. The behavior of my filters is odd as sometimes they work perfectly fine, and other times I receive the followi
-
I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do
-
Print BufferedImage Externally Generated
Hi, I'm trying to build up a BufferedImage using its Graphics component, and then print that image using a Printable. The problem is that some of my operations on the graphics component seem to be lost, and when I print the image, a lot of it is clip
-
Can I install Lion as a complete re-build from the App Store
Hi, I have Snow and want to update to Lion. When I do this I want to start again from scratch and do not want to carry over my acocunts and setting (my machine needs a good clean out). If I upgrade from the App Store will I be given the option to d
-
What to change to attempt to fix mouse problem
Hello! Ok, so I have a bit of an annoying problem with my mouse, The middle button is a scroll wheel, but when I click it (trying to get the middle click for new tab in firefox / pasting accross terminals, etc) it quite often double-middle-clicks! No