This display does not support HDCP

Hi
To help Sky with this issue, would you be able to let us know the following?
Have you been able to fix it - if so, what did you do to fix it?
Your Sky+HD box model number (Services > Settings > Details)
The make & model of TV
Other than your Sky box, what other equipment do you have connected to the TV's HDMI ports?
Does unplugging them correct the issue?
Thanks for your help.

Not sure if it's any help but I recently purchased a new 4x2 matrix switcher and slim HDMI leads. This message would pop up on a regular basis and I assumed it was the switcher and/or leads. I pulled everything apart and put it all back together, this time ensuring that the HDMI leads were properly seated. No problems since, so I can only assume that I hadn't connected one of the leads correctly.

Similar Messages

Suddenly " display does not support HDCP " - March 2014

Hello Sky peoples Having had no trouble with my Sky+ HD and my LG TV for months and months I am now getting this "does not support HDCP" dialog every time I switch on. The TV was on then suddenly it blacked out and wouldnt restart - so I had to de-power at the socket. After restart, this error dialog always appears - and no HDMI signal I have tried all the remedial actions, power-down restarts, cable switchovers, updated box software, unplug/replug The display still works fine on bluray and xbox 360The sky box is still putting out a signal on composite video. yinch'14

Hi there Yinchy,
Thank you very much for joining us on the community forum and posting your query.
I am extremely sorry to see that you are experiencing this issue.
There are a number of things that you can do to try to resolve this.
Firstly, Reset the HDMI signal.
Using the Sky remote:
1) Press Standby on the Sky remote. Standby light displays.
2) Switch off the power supply or remove the plug at the mains socket.
3) Switch connection equipment to standby and disconnect at the mains socket.
4) Confirm no lights remain on the Sky box or any connected equipment.
5) Wait 60 seconds, then switch the TV on at mains socket.
6) Switch the TV to the correct HDMI or DVI input.
7) Switch the Sky box on at the mains socket.
8) Wait 2 - 4 minutes after the standby light displays.
9) Switch on all connected equipment at the mains socket.
10) Press Sky to switch on the Sky box. The green light displays.
Please let me know how you get on with this and I will be able to help you further if required.
Many Thanks,

Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

No.

Unable to install photoshop elements 13 on new computer. Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Videochat not possible this computer does not support video chats

Hi there, since yesterday its not possible to to start an video chat. It's grey. In the preference of "mesage" under the tap "video" shows the message "this computer does not support video chats. There is no problem with the camera, i can use facetime video and skype video.
Who can help me?
Greetz

After searching the support communities i found this and it worked!!!
Try:
Quit iChat.
Open Terminal (it's in the Utilities folder, in the Applications folder).
In Terminal type or paste this command on a single line:
defaults write com.apple.iChat newbwdup 300000
Press Return.
Quit Terminal.
Open iChat.
Worked for me!!!

This ANE does not support Desktop(Mac) platform

I'm getting the following error when I try to add an ANE to my mobile project.
This ANE does not support Desktop(Mac) platform
I'm using Flash Builder 4.7.(Air 3.7) The iOS SDK path has been set. I've tried to just ignore the error and just apply settings but this causes and error. I'm having the problem with all ANE files. The Target is showing up as Google and iOS so I'm not sure why it thinks I'm trying to run on the desktop.

Created a new mobile project and still getting the same problem. I think it's a Flash Builder 4.7 issue.

Message: This application does not support this browser

After pressing 'New Analysis' in the Web Analyzer I am getting the message:
This application does not support this browser: Microsoft Internet Explorer 4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
This is for a new BW 7.0 install (SPS13) in combination with IE 7.0 (woth IE 6.0 it works fine). I have been using IE 7.0 for almost a year now and had no problems before.
Does anyone know how to solve this? (Besides using IE 6.0)
Thanks,
József.

Ajax is a microsoft toolkit that the web site is using and is not compatible with Safari. They only support I.E. and windows.
From the Safari menu bar click Safari / Preferences then select the Advanced tab. Enable the Develop menu. In the Develop menu select User Agent and then try Internet Explorer 9.

IChat says, " This computer does not supporting video conference"

When i log in to iChat dan choose video preview, the window appears with sentence says,"This computer does not supporting video conference" in my Macbook Black with iSight camera built-in. Can anybody solve this ?

The same thing is happening to my brother's computer. He has a PowerBook G4 867MHz with 1.12GB of RAM. This barely meets the system requirements, but, nonetheless, I was able to install Leopard.
It says the reason I can't do a 1-1 video chat is because of a slow network, but it still says this even when I'm using the Bonjour buddy list on a local (54g only) network.
According to the knowledge base article (http://docs.info.apple.com/article.html?artnum=306687), there is no reason why he couldn't participate in a 1-1 video chat.

ICal availability panel message "This Calendar does not support availability". Synch is OK with CalDAV. Don't know why - only since installing Yosemite

My iCal is synching OK withe the CalDAV calendar it is linked to, but when I try and check availability of others to schedule an appointment, it says "This Calendar does not support availability" I've only started getting this since upgrading to Yosemite

I have the exact same issue, I am working with apple support now, and they had me reinstall OS from recovery. Still no success...

"This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x"

Hi, I have installed vmware 5.5 hypervisor on hp G8 microserver. I have created one vm as windows 2008 R2. I have also install vmware workstation 11 on this vm. In this workstation when I tried to run vmware 5.5 hypervisor I come across "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x" this statement. Which shows that the host machine does not support virtualization and for that you need to go in Bios and enable it but in present case as host machine is also a vm and you would not find much detail of Bios when you log into the Bios therefore, I am pretty much stuck here. I don't see any information in relation to this. Now my question is:
1. Can we run ESXi inside a vm which is already sitting on ESXi?

I moved the discussion from VMware Workstation to Nested Virtualization which contains several hints on what's possible and what needs to be configured to make things work.
André

This display does not support HDCP

Similar Messages

Maybe you are looking for