This forum Poorly designed for a laptop screen

Nothing fits in the screen you must scroll forever. Its bad enough on a 23 inch monitor but just unacceptable on a laptop.

while I admit my website is not up to pro standards (people here have laughed at it here, but it does what I want), I try as much as possible to avoid to use any height or width settings so that the site look approximately the same whether your on a 12" wide Laptop, or you have a 24" by 24" Computer Monitor. I don't use any fixed point sizes The only thing I worry about is picture sizes.
And I try to center everything so there is equal amount space on both sides I hate worth a Pasion sites that everything justfifed left with half a screen of backround space.
But being left justified seems to be the normal setup with web design applications and, people just rather not be bothered. so you end up witha third of screen of content then two thirds white space. Then you have to scroll a mile down. when if the center everthing and left everything float. most page you could get everything on just one screen with no scrolling up or down or side to side unless you have a lot of content. Now as to PDF pages, that different they are set according to page setup used to create the PDF.

Similar Messages

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.
I am currently using Photoshop Elements 8 on Windows 7. After several years of use, I am self taught and adequately proficient for an amateur. What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing.
Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust. Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom. Frankly, I'm thinking that it would be smoother to stay within the Apple product line.
So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies). But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
- If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?
- if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?
- Can it splice together several separate photos to give a panoramic?
If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).
Thanks in advance for your consideration and help!

I am concerned, however, about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
Thanks for any insight on this
Amy,
Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

Need my Email Address Switched for This Forum-Been Trying for a Week

Need my Email Address Switched for This Forum-Been Trying for a Week.
Can an Administrator PM me and switch it?
thank you!

See post here for more information, but this is officially resolved!
As of 09/29/09, you can now change your email address for the forum via My Settings even if you have a community-only id. Many thanks to the mods for this update!
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

This User Forum Poorly Designed

This forum is difficult to use because the registration process is a failure. How do I file a complaint regarding the poor quality of this forum. When I tried to register the registration refused my email address. Sorry that is my only email address. It is dum to refuse my address. This forum is worthless if I can not register with my real email address.
This question was solved.
View Solution.

Hi kc3mx,
Is it possible that you had already registered with the email address at a previous time? What message are you receiving when you try to register?
Thanks,
SedonaF
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Is this the best design for asynchronous notifications (such as email)? Current design uses Web Site, Azure Service Bus Queue, Table Storage and Cloud Service Worker Role.

I am asking for feedback on this design. Here is an example user story:
As a group admin on the website I want to be notified when a user in my group uploads a file to the group.
Easiest solution would be that in the code handling the upload, we just directly create an email message in there and send it. However, this seems like it isn't really the appropriate level of separation of concerns, so instead we are thinking to have a separate
worker process which does nothing but send notifications. So, the website in the upload code handles receiving the file, extracting some metadata from it (like filename) and writing this to the database. As soon as it is done handling the file upload it then
does two things: Writes the details of the notification to be sent (such as subject, filename, etc...) to a dedicated "notification" table and also creates a message in a queue which the notification sending worker process monitors. The entire sequence
is shown in the diagram below.
My questions are: Do you see any drawbacks in this design? Is there a better design? The team wants to use Azure Worker Roles, Queues and Table storage. Is it the right call to use these components or is this design unnecessarily complex? Quality attribute
requirements are that it is easy to code, easy to maintain, easy to debug at runtime, auditable (history is available of when notifications were sent, etc...), monitor-able. Any other quality attributes you think we should be designing for?
More info:
We are creating a cloud application (in Azure) in which there are at least 2 components. The first is the "source" component (for example a UI / website) in which some action happens or some condition is met that triggers a second component or "worker"
to perform some job. These jobs have details or metadata associated with them which we plan to store in Azure Table Storage. Here is the pattern we are considering:
Steps:
Condition for job met.
Source writes job details to table.
Source puts job in queue.
Asynchronously:
Worker accepts job from queue.
Worker Records DateTimeStarted in table.
Queue marks job marked as "in progress".
Worker performs job.
Worker updates table with details (including DateTimeCompleted).
Worker reports completion to queue.
Job deleted from queue.
Please comment and let me know if I have this right, or if there is some better pattern. For example sake, consider the work to be "sending a notification" such as an email whose template fields are filled from the "details" mentioned in
the pattern.

Hi,
Thanks for your posting.
This development mode can exclude some errors, such as the file upload complete at the same time... from my experience, this is a good choice to achieve the goal.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Make this forum also available for those who use others browsers then IE

I can create a message in this forum from IE, but for Chrome it is closed
Success
Cor

Hi Cor,
I'm able to create new threads in other forums with Chrome:
http://social.technet.microsoft.com/Forums/en-US/e4bf5833-895e-4c89-8a96-8ef44b3bae82/test-post-using-chrome?forum=tnsandbox
Is this happening for you across all forums or just in one specific forum?
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

Is this forum also used for Pro*'C Questions?

.

This is not a good forum for Pro*C, because although Pro*C is now shipped with Studio, it is an Oracle DB product.
An Oracle database programming forum is the best place to look. A list of forums is here:
https://forums.oracle.com/forums/category.jspa?categoryID=18

Can't find search function for this forum?

Am I blind or something, or is this site working as well as soundtrack pro? Where is the search bar?

I agree!
I've just joined this forum to look for specific answers, and searching is the first and +most necessary+ thing I want to do...
How is not having this feature improving the performance of the forum? Is the hope that Apple will put vast numbers of users off by being annoyingly non-functional and nonsensical?!!

Is this forum only for applet developers?

Hi all,
I wanted to know if this forum is only for the applet developers.
If so can anyone please tell me where can I get answers for questions about adapting the JCVM to a smartcard OS?
Thanks
Priti

That would involve dealing with the manufacturers since you are dealing with masks. I don't know of any mask engineers that are in here. I believe either Infinion or Philips provides a kit for masks development. Also check with IBM's JCOP, it's the mask commonly used on major vendor cards.

HELP!! PSE7 Downloader doesn't fit laptop screen

I've recently upgraded from pse4 to pse7 and have just found the 'advanced settings' button on the downloader. However, the window this opens is too big for my laptop screen and I can't access the 'get photos' button. I can't get the window to move like a windows window. Can anyone help?
Thanks
Adam
www.shortwayround.co.uk

Interesting, the Advanced Dialog window is 812 pixels high, larger than the 768 typical of a laptop (and the minimum required by Adobe for PSE). And PSE doesn’t let you make the window any smaller.
Here’s how to move the window around if the title bar isn’t visible: Click anywhere within the window. Then hold down Alt and Space at the same time. Release Alt-Space and type “m”. Now you can use the up/down/left/right arrow keys to move the window around. Left-click with the mouse when you have the window where you want it.
You can try this on other top-level windows first to see how it works.

Laptop screen not getting locked on close lid or resume from suspend

I am using kde 4.4 rc2 atm. My laptop screen is not getting locked when I closed the lid or when laptop resumes from a suspend to ram.
It used to work correctly before I installed acpid(before that I just had the acpi client package installed.) Power Devil used to handle everything correctly.
The power devil settings already says, Lock screen on resume and I have added Lock screen as action for Lid close for performance profile.
Is there any way to fix this. I want to make laptop screen lock when I do lid close or resume from suspend/hibernate.

Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
Try a different graphics driver
Tweak the driver module parameters or build your own driver.
Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

Where can I find a certain keyboard for my laptop?

Hi there!
I sadly spilled water on my laptops keyboard and some of my keys display two letters at once.
For example when I hit 'y' I get 'y6' and when I hit 6 I get 'y6'
This goes for other keys as well were they are flipped.
Is there any way to fix this problem?
If not where can I find a keyboard for my laptop?
Laptop: Pavilion m6-1035dx Entertainment PC
Thank you for reading this post and if so helping me!

Hello Geezuzraptr,
You need a new keyboard.
Here is a link to HP parts store. They’ll have the part that is designed for your laptop.
Here is the number if you would like to call.
1-800-227-8164
Have a good day.

Welcome to this forum on "Core J2EE Patterns" by the Sun Java Center

Welcome to this forum on Core J2EE Patterns by the Sun Java Center!
CONTEXT:
This forum is intended for discussing the patterns from the Sun Java Center J2EE Pattern Catalog and other topics discussed in our book, Core J2EE Patterns.
We, the authors of the book, welcome you to this forum.
WHO WE ARE:
We are Enterprise Java Architects from the Sun Java Center (SJC), which is the Java consulting organization of Sun Microsystems. We are a world-wide group of architects focusing on all consulting related to Java technologies.
Visit our web-site for more information on SJC:
http://www.sun.com/service/sunps/jdc/index.html
BACKGROUND:
Over the last few years, we at SJC have worked with our customers in architecting, designing, and implementing solutions on the J2EE platform. We have worked on documenting the J2EE patterns for over two years and released the patterns for public review in Beta form via the Java Developer Connection in May, 2001.
The beta version of the patterns is available online as The Sun Java Center J2EE Pattern Catalog at:
http://developer.java.sun.com/developer/technicalArticles/J2EE/patterns/
Subsequent to the release, we received great feedback and comments from hundreds of reviewers. We then worked towards incorporating the feedback into the pattern documentation. One of the common comments was about the lack of code examples in the online documentation. The latest pattern documentation provides many code examples and incorporates all the feedback received so far.
BOOK INFORMATION:
Core J2EE Patterns, the book, was released at JavaOne 2001 during June 4-9, and will be available in stores around the end of June 2001.
The book includes the complete updated Sun Java Center J2EE Pattern Catalog with 15 patterns covering these J2EE technologies: Java Server Pages (JSP), Servlets, Enterprise JavaBeans (EJB), and Java Message Service (JMS). In addition to the J2EE Pattern Catalog, the book also provides other chapters that discuss design considerations,
bad practices, and J2EE Refactorings. Example code is included for all patterns and strategies.
If you wish to view the complete table of contents or order the book, please visit one of the following online bookstores:
Fatbrain.com: http://www1.fatbrain.com/asp/bookinfo/bookinfo.asp?theisbn=0130648841
Amazon.com: http://www.amazon.com/exec/obidos/ASIN/0130648841
COMMUNITY:
The online community for discussing the patterns included in our book Core J2EE Patterns has grown over the past year, since our first presentation at JavaOne 2000. This community is supported by our LISTSERV and is available for public participation at:
http://archives.java.sun.com/j2eepatterns-interest.html
You can view the past discussions on this list at the above URL.
FORUM LOGISTICS:
John and Dan are on the east coast and Deepak is on the west coast. We will be tuned into the forum and answering the messages periodically between June 19 and June 25, 2001. If you want to discuss the J2EE Patterns after June 25, you are invited to join the aforementioned J2EE Patterns Interest list.
FORUM DISCLAIMER:
All responses to questions posed in this News Group are given on an "as is" basis. We believe the solutions or explanations given here are correct, but do not guarantee that responses will be complete, without error and/or work for all platforms and system configurations.
The forum is now open! Let the discussion begin...
John Crupi - Chief Java Architect
Dan Malks - Enterprise Java Architect
Deepak Alur - Enterprise Java Architect
---Authors of Core J2EE Patterns

Rajakannan,
There are numerous ways to implement a templating mechanism in support of the composite view pattern, included in the catalog as a presentation-tier pattern.
The goal is to avoid simply having monolithic views with all the formatting code embedded directly withing the view. If we have common subviews that are shared across several or more views then we end up with a copy-and-paste type of reuse...undesirable. So, modularity is one issue. Another major force when considering the Composite View pattern is that we may want to manage the layout of our pages and the content of our pages separately. We may have some logical regions defined, such as a search panel and main body, and a subview that plugs into those logical regions that map to a physical page (ie: x.jsp and y.jsp). We may then want to vary one independent of the other...ie: we may want to modify the layout of the page w/o changing the content and we may want to vary the content w/o touching the layout.
There are a number of implementation strategies that can be used to implement the Composite View pattern, ranging from relatively simple to much more sophisticated. We describe each in our book and include source code examples.
The example in the book that allows for supporting all the issues described above is implemented using the "Custom Tag View Management Strategy" and uses a tag library written by David Geary, that supports the Composite View pattern. The library is also included in David's new book, Adv. JavaServer Pages, Prentice Hall, 2001.
Again, it's simply one implementation and, as you mention, there are many different ways to implement this strategy.
Thanks for your question,
Dan

How to go to particular page in this forum

Hi all,
can anybody know how to go to particular page in single step.
this is not the right question in this forum, but sorry for asking
please let me know
thanx
asp

bookmark it?

Updated: Rename this forum

Hello all,
Originally this forum was intended for ccBPM and Workflow. However I have noticed that 99% of posts are for workflow, and the occasional BPM post isn't answered. The confusion is because BPM is still in the title but I suspect hardly any BPM folks frequent this forum anymore. Or do they?
So I have submitted a proposal in the suggestions forum and invite you to add your comments. If enough people agree then we can get the name changed to SAP Business Workflow. On the other hand if people prefer to see XI/PI/BPM questions in here then we can keep it as is. Or perhaps it should be Workflow and Guided Procedures or any other suggestions?
The proposal is [over here|Rename "BPM and Workflow" forum to "SAP Business Workflow";, please add any comments there.
Cheers,
Mike
Edited by: Mike Pokraka on Oct 1, 2008 4:13 PM

Update:
As most of you have probably already noticed, this forum has been renamed.
Actually, that's not all that happened: a second forum was created as well, so I thought I'd drop a short note here to point out the [announcement|A new forum, and the difference between BPM, BPM and BPM] which also contains a little background on this whole BPM business.
Happy Workflowing,
Mike

This forum Poorly designed for a laptop screen

Similar Messages

Maybe you are looking for