This FXP project is invalid and cannot be opened

Yesterday my laptop was buggy so i saved my project, when i restarted it gave me this messege,
"This FXP project is invalid and cannot be opened."
so basically 10 hours of work have been wasted, is there any solution or anyone that can help me with this error.
P.S.: I already read the past articles and questions about this error and i tried to open it on flash builder and it also gave me the same error.

Hi there,
You have to edit manually the file to correct the error. That happened to me with a big project and that's what i had to do:
1. Make a backup of the file
2. Open the file with Flash Builder and check the errors.
3. Fix the error in the source code and try to run it to make sure you did just what you needed to.
4. Close the project in flash builder and try to open the fxp with a zip filer (WinZip, Winrar...)
5. Go to the file you edited in flash builder and make the same changes you did there.
6. Save the file and wait for an update confirmation for the Zip filer you use
7. Open the file with flash catalyst.
8. That's it!!!
Let me know if that works for you!!

Similar Messages

"The FXP Project is Invalid and Cannot Be Opened"

Hello,
I was working on a project when FC started really slowing down. I saved my file and then restarted FC and when I tried to repoen it I got this warning: "The FXP Project is Invalid and Cannot Be Opened". I'd be more than happy to email the .fxp file to anyone that can help, it'd be great if someone could help me figure this out soon!
Thanks,
Brandon

Were you working in Flash Catalyst 1.0 or the Panini release? I am not on the team, so there is nothing directly I can do, but that might help some id the issue. Hopefully, some one on the team might be able to take a look. Do you have Flash Builder installed? If you have you tried opening a copy of the file in it?
There is a chance your best bet would be to start over. You might want to create a backup system for you progress, just in case.
Good luck,
Chris
PS: I have had this happen once, and it sucked.

The project was saved in a newer version of Premiere Pro and cannot be opened in this version

I edited a project on CC on one computer and saved it on my external. My friend took the same project to edit it on her computer under her own name and licence. Both of us recently upgraded to CC. But the same project that worked a few hours back on Premiere Pro CC, does not work now also on Premiere Pro CC and I received a message saying: The project was saved in a newer version of premiere pro and cannot be opened in this version." Can you please help us.?
Message was edited by: Kevin Monahan
Reason: Your title was too long.

Hi alexxxkid,
You should be able to import the xml into an earlier version.
Backward compatibility has never been there with Premiere and it is always recommended not to update in the middle of a project.
As far as the crash is concerned, please tell me more about it so that i can help you to the best of my knowledge.
Thanks,
Rameez

"The project was saved in a newer version of premiere pro and cannot be opened in this version." - Except it wasn't!

Last night I saved a project I've been working on for a couple of days. It's been fine all along. Today, when I went to open it, it's no longer listed in the recently opened files on startup and i get this message:
"The project was saved in a newer version of premiere pro and cannot be opened in this version."
Except it wasn't! I use Premiere CC and it's been fine all along. I can no longer open it at all...
Any thoughts? Very frustrating!

One more item. In using PP CC2014 for the first time with this project, I have run into multiple issues making this project very frustrating. When adding a sequence to the master sequence, I have to render the audio each time in order to see all of the audio waves. You have to keep doing this over and over, even though you've already rendered a sequence already.
I am getting error messages when rendering the project saying there are issues compiling the movie. Getting same type error message if I try to export. I narrowed it down to two sequences keeping the program from rendering without the error messages. They each had a tiff file. I deleted them and they rendered. Not sure what this issue was with these particular files since I have other tiff files in the project. Once the rendering of all sequences was done, all the individual sequences were closed and the master was the only one open. I didn't close them. So now to edit any of the sequences I have to go back and open them.
The only thing this project has in it are titles created in PP, a few graphics, mostly tiff tiles and some jpeg and the dissolve effect. That's it. Seems like they should have done more with this version before putting it out there. Maybe that's why there are two separate applications for PP? Who knows. I will be uninstalling PP CC2014 when this project is complete.

Everytime I try to open my project, it says it is damaged and cannot be opened? Why? How can this be fixed?

Everytime I try to open my project, it says it is damaged and cannot be opened? Why? How can this be fixed?

emerickd
Wonderful news. Congratulations on your success. Great job.
You wrote
Wonder why the auto-saves were kind of all over the place as far as their numbers and my progress? Oh well!!
A few years ago I looked at the ordering of those AutoSaves, but could not find the thread. So, I decided to look at Premiere Elements
13/13.1 ordering of the AutoSaves.
My Edit Menu/Preferences/AutoSave settings were the following to speed things up
Automatically save every minute(s) = 1
Maximum Project Versions = 5
In the Adobe Premiere Elements AutoSave Folder were:
My new video project-1.prel (first and the oldest)
My new video project-2.prel
My new video project-3.prel
My new video project-4.prel
My new video project-5.prel (last and the newest)
I am OK with the first 5 with the maximum project versions = 5, but.....
Since I have set for only 5 versions, where do the subsequent versions go every 1 minute since you continue to
see only the above file names in the Adobe Premiere Elements AutoSave Folder.
My new video project-1.prel
is now the 6th AutoSave and replaces the original first AutoSave.
My new video project-2 prel
is now the 7th AutoSave and replaces the original second Auto Save.
Since I did 7 AutoSaves, this is the last and the newest.
My new video project-3.prel is still the original third AutoSave.
My new video project-4.prel is still the original fourth AutoSave.
My new video project-5.prel is still the original fifth AutoSave.
So, after the generation of the 10 th AutoSave, all the original 5 AutoSave would be gone,
and the My new video project-5.prel would then again become the last and the newest)
As for the question about
Can I re-save this auto-save under a different name?
Yes, but review the Edit Menu/Preferences/Scratch Disks for the locations of the scratch disc. If same as
project, then those scratch disc will end up in the folder with the AutoSave which has become your project.prel.
A battery failure was at the core of this situation. So you should be OK moving forward.
Best wishes
ATR

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

Quality manager QMQU0003 The audio file is invalid and cannot be played

Hi,
I've client using Cisco QM 8.5. There is a recording dated 21st November, 2011 for one agent which he is not able to play back. The agent took many calls that day and all the recording are getting played back except one. The duration of call in question is shown as 37 minutes but the file size is 0KB.
The error client gets while trying to play back is:
QMQU0003 The audio file is invalid and cannot be played
The recording is important to the client. Can someone pl comment what could be done to retrieve it and what could have caused it?
I looked at Event Viewer on Agent PC, unfortunatley there aren't any entries since 8th November to 22nd November. The PC was rebooted on 22nd November and all event viewer is getting updated correctly now.
I am attaching the screen-shot of error in case someone is interested in seeing.
Thanks in advance,
inner_silence

Thought of updating the case with current status.
Got some help from Calabrio and the engineer identified a known bug in QM 8.5.1 release.
The Bug ID is: CSCTK75463
Fix will be in QM 8.5.2.
Checked CTIService debugs and found that the agent received a transferred call and the customer has Immediate upload turned on. As a result of this they unfortunately ran into the timing issue which is fixed in 8.5.2.

"project appears to be damaged and cannot be opened" message

What is causing my recent projects to not re-open? And what causes this "project appears to be damaged and cannot be opened" issue?

pamelaproof
Just saw your thread and thought that I would contribute these comments....
a. As asked by SG, what version of Premiere Elements are you using and on what computer operating system is it running?
b. I am jumping ahead of the classical questions on your source media, project settings, computer environment and the like to cut to the damaged project aspects of issues. In that regard have you read the Adobe Tech Note that addresses troubleshooting suspected damaged projects?
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html
c. But you cannot escape the answers being in the details. Best not to take anything for granted by the person asking the question nor the person asking the questions. SG started off with some important questions. I do not see answers to those questions yet in order for him and others to sort through to an answer for you. Please answer his questions before mine so that we can rule factors in or out as asked.
Thanks.
ATR

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

Why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloadi

why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop.

Disk Utility says of USB Drive - "This partition can't be modified" "This disk is not writeable and cannot be partitioned"

Several months ago I bought a 64GB PNY USB memory stick to transpord data quickly.
It seemed to work fine. I could format it as a Mac partition and use it. I hardly ever need
it so I just put it away.
Today I wanted to use it to put a file on and take it to the Kinko's/FedEx to print, and I
find I cannot mount it on any of my computers, iMac, MacMini or MacBookPro.
In Disk Utility virtually everything is greyed out.
Disk Utility says: "This partition can't be modified" "This disk is not writeable and cannot be partitioned"
If I try to mount it, it says "This disk cannot be mounted"
There is no physical read-only switch or setting on the disk that I can see and it is very small.
I has a Mac OS installed on it, so I wonder if that is a problem? I should be able to write over that
or reformat it I would think.

Thanks for these replies.
I've got regular time machine backups and just backed up some of my data by copying some key folders to an external drive. I'm bit paranoid about backup integrity and would ideally like to do another full backup to a different drive using a system other than time machine, in the event that something goes wrong with the time machine backup. Any recommendations on good and affordable backup software to do a backup of my TM backup?
One other question: I seem to encounter problems like this pretty frequently. I'd say once a year or so, my drive fails completely or gets near enough to failing that I have to wipe and restore. (I've never had a TM backup fail to work, though the last go around there were some hiccups which has led to my backup paranoia.) I've had this happen on multiple computers, so I'm becoming pretty convinced that the problem lies somewhere in my data. Is it possible (even likely) that there's something in my data causing this recurring problem? If so, is there anything I might be able to do to try and pinpoint and address this problem? I'd love to go one year without having to wipe/restore my machine!
For a while I thought I just had bad luck. But I think this is like the 4th or 5th time this has happened in the past 4 years and every time, I'm restoring from a backup, so I come back with the same data. It's the one constant since I've had 3 different machines over this same time period.

Why do I constantly receive a pop up telling me "this URL is not valid and cannot be loaded?"

Why do I constantly receive a pop up telling me "this URL is not valid and cannot be loaded?" How can I stop this pop up?????? HELP!!!!!
== This happened ==
Every time Firefox opened
== A week ago.

Do you have the Google Toolbar installed? If so, go to '''Tools > Add-ons''' > Extensions''' Select the Google Toolbar, click '''Disable__ then restart Firefox.

I just upgraded to Yosemite, downloaded iPhoto 9.6 and get this promptYour photo library is damaged or unreadable and cannot be opened. Please restore from a backup. Suggestions?

I just upgraded to Yosemite, had to upgrade my iPhoto so downloaded iPhoto 9.6. My photo library needs to be upgraded to work with this new version of iPhoto but when it started to upgrade, this prompt appeared -Your photo library is damaged or unreadable and cannot be opened. Please restore from a backup.
Suggestions?

Try download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

This adobe Muse site file is damaged and cannot be opened.

This is a nightmare. I finished this website, went to go and update and got the message that the site file is damaged and cannot be opened. Are you serious? What can be done to get the file back, and how can this be prevented from happening again? I may have to completely toss out Adobe Muse because this is not good. Please help.

Please send us the .muse file and the MuseLog.txt file from your Documents folder to [email protected] along with a link to this thread. If the files are larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (If you use a service, please include your return e-mail address in the body of the message, since not all services include it in the sharing invite they send.) Thanks.
Was the file stored in a synchronized folder (i.e. Dropbox, Creative Cloud Files folder, etc.)?

This Adobe Muse site file is damaged and cannot be open.

Hi all,
While making some edits to my muse site, my mac froze, and I waited for about 10 mins and it was still frozen--so I forced restarted my computer. Upon re-opening the file, I received the message "This Adobe Muse site file is damaged and cannot be open." I was wondering if there is any way to recover the file. I have a very recent HTML export of the site, is there a way to re-import that into a muse file? Or perhaps the file is somehow able to recover? I'm on an iMac that was just bought. It's pretty frustrating because my last backup was from two weeks ago and there have been major updates to the design of the site. At the very least, I have the latest export to copy the layout from, but my site is 50+ pages. Thanks in advance for any help.
-Jack

I don't have good news. The file is truncated. It's shorter than it should be and the missing information isn't something I can manufacture.
From your description of events and looking at the information in your log file we believe you hit a rather obscure weakness in the Mac OS, or perhaps Mac hardware or the hard drives/controllers used. When an application writes to a file and requests the file be flushed to the physical media, two things occur. The first is the data is written to the physical media and the second is a table on contents on the media is updated to indicate the new length of the file. In this case it appears the Save completed successfully as far as Muse could tell (the success is reported in the log), but what probably occurred is either a very low-level OS crash and/or your restart of the computer occurred before the length of the file was updated in the table of contents.
Unfortunately, after some time spent searching online, it doesn't appear as though there are any Mac OSX tools that will re-extend a file without altering the bytes in the newly extended area. Or at least I couldn't find any (and it makes sense for security reasons that the old data wouldn't be there when the file was re-extended). Even if there is such a tool, it's very likely other activity on your machine since the restart has already overwritten those bytes with some other file, so the missing part of the file is now gone.
I'm sorry, but I'm not aware of any way to recover or repair your file.

This FXP project is invalid and cannot be opened

Similar Messages

Maybe you are looking for