THIS HANDHELD DEVICE INCLUDES SOFTWARE THAT IS PROPRIETARY AND CONFIDENTIAL TO RESEARCH IN MOTION LIMITED
This handheld device includes software that is proprietary and confidential to research in motion limited ("RIM") and/or its affiliates and suppliers. Except to the extent that RIM is expressly precluded by law from prohibiting you from doing so, You are not permitted to reverse engineer... etc
and an "OK" button at the bottom of the agreement.
This comes up right when i turn on the phone; and i cant push the "OK"
button, I've been trying for hours.
With your phone powered on, remove your battery then replace it. Try once again after that.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.
Similar Messages
-
THIS HANDHELD DEVICE INCLUDES SOFTWARE THAT IS PROPRIETARY....
I just updated my Blackberry Bold 9700 and now I can't get past this screen with the proprietary acceptance text. I have tried the following unsuccessfully:
1. Taken the battery off and put back on and re-booted.
2. Tried to update the software again by connecting to my laptop.
3. Taken the battery off, then put battery back on, when red light turned off, I pressed the escape button to possible start in safe mode. didn't work.
4. Taken the battery off, then put battery back on, when red light turned off, when re-boot started, I pressed the escape button to possible start in safe mode. didn't work.
Please help.
Thank you!nitestyx wrote:
The software and the upgrades are a disaster from a company that is totally mismanaged and lack true AMERICAN engineers.
I will never buy a BB again.
Bye. Let me get the door for you on your way out. As you're leaving, make sure you drop by some forums for other platforms to see how they're doing. I'll give you a hint if you like: I've checked them out and you won't be any better off elsewhere.
Anyway, it's your decision. You're welcome back here anytime.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
I have recently updated my curve 9300 and before it was working verywell.
So oke now that i have updated the phone i tried to boot up, it boots up like these pictures
security test pass 100%
and then i get this message and then i cant do anything, nothing is woking cant even scroll down.
Does anyone know what to do??
i have did the update a couple times again with no luck so far, even did a downgrade but still the same message!
Thanks fella's !!!!!Hi and Welcome to the Community!
The last image...you need to scroll down that screen until the buttons appear allowing you to proceed. The tiny little blue down-pointed triangle at the bottom right of the screen indicates there is more to display, and you simply need to scroll down.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Does anyone know of software that converts LaTex and rtf files to doc?
Hi All:
I edit documents for PhD candidates in economics. As these documents generally contain a lot of symbols, the authors use LaTex, which they sometimes convert to rtf. I prefer to edit using word and track changes. In fact, that's the only way I know how to do this. So I am wondering if anyone knows of software that converts LaTex and/or rtf files to doc files.
Thanks so much,
LunenburgerBean can do this:
http://www.bean-osx.com/Bean.html
and I am sure that Word accepts rtf documents as well.
There is a version of LaTex for Macs:
http://evolve.lse.ac.uk/software/EquationEditor/
(scroll down). -
I have about 88,000 songs in my music library, some are duplicates. Does anyone know of any Apple Product or 3rd party software that will identify and remove duplicates.
Backup your music to an external source before doing this, just in case you delete the originals by accident.
iTunes will show you the duplicates. But I recommend tagging their comments or another field once selecting them to ensure you don't accidentally delete both the original and duplicate. You can always select all of them and change all their comment tags at once. Once you've done that, stop showing duplications, and then sort by the comment field. This will allow you to determine whether only the duplicates were shown in the show duplicates, or the originals. If you see any without comments, then you can go ahead and delete the duplicates. -
When I move my curser over certain things I get this Message in a window that pops up and says "We noticed you may have signed in or signed out in another window click ok to reload your page." How do I get this to stop.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
You may have to create an Allow cookie exception for that server.
* Tools > Page Info > Permissions -
Any third party software that replaces SecMon and IDS-MC
I am looking for any third party software that may replace SecMon and IDS-MC. We have had so many issues with it that it is time to find a solution by looking for another vendor to manage Cisco's NID's. If anyone has had any luck please let me know.
CWSIM is another tool that you can use to get log messages out of sensor. for management purposes if you have a few sensors then you can use IDS device manager.
-
Need suggestions for software that can digitize and store my class notes.
As the new semester starts soon, I would like to become better organized by digitizing, organizing and storing class notes in a database style system. Ideally the software would include a simple word processor, and have a preview system somewhat similar to the Finder.
Does anybody have some suggestions?
Thanks in advance!Terence Devlin wrote:
Journler has excellent indexing, and perhaps best of all the Lexicon. Check it out.
CircusPonies NoteBook also has excellent indexing, but is tortured by the notebook metaphor it uses for my taste.
The indexing is the key factor, makes it easy find data and - even better - see connections between apparently disparate entries.
Regards
TD
Thanks very much for your suggestions, but after trying out iOrganize, I find that that is exact program I was after. -
IS THIS SWITCHING MATRIX A SOFTWARE THAT AC ACTS AS A TEST EXECUTIVE OR JUST CONTROL THE MATRIX.
SWITCHING MATRIX SOFTWARE
I am not sure what you mean by SWITCHING MATRIX but TestStand 2.0.1 has two ways of interacting with switching hardware. (1) Using the IVI Switch step type and (2) Using NI Switch Executive.
The IVI Switch step type allow you to use a class layer directly from withing TestStand to perform switching operations to an IVI compatible instrument driver for a specific type of hardware switch. All configuration is defined by the steps.
NI Switch Executive is an intelligent switch management and routing application that NI just released. NI Switch Executive allows you to interactively define and name switch routes that you later call from your test application. TestStand offers easy integration between the two products by allowing you to specify at the
step level whether to connect and/or disconnect routes you define within the NI Switch Executive application. You can find out more information on the NI Switch Application at, http://sine.ni.com/apps/we/nioc.vp?cid=10861〈=US
I should point out that the downloadable evaluation versions of TestStand 2.0.1 and evaluation of the NI Switch Executive work together.
Hope this helps...
Scott Richardson (NI)
Scott Richardson
National Instruments -
Each time I open this I get a message that pops up and says
I get the below message from the first time I open the program since I have installed it electronically.
Adobe Premiere Elements.exc – No Disk
There is no disk in the drive. Please insert a disk into drive E.
Cancel Try Again Continue
I have tried to insert an empty disk and it doesn't help and just comes right back up. I than have to hit Cancel 6 times before it goes away. Then after working in the program and even burning a DVD disk and close the program the same message comes up and I have to cancel it 3 times before it will go away.John T. Smith
Thank you for posting that forums search list for No Disc. I have not mastered the art of finding things in the Adobe Forums. And, that type of search grab is what I have been seeking lately for a variety of things, but was not sure how to get there. Tonight, your post inspired me to try to figure that out, and this is what I came up with:
1. Start on the Adobe web page which appears to have the address https://forums.adobe.com/welcome. And, in the "Search Communities" field to the top right of the page, type in (in this case) "No Disc".
The "Search Communities" No Disc entry takes you to the following web page where you can go to the left column of the page, find Restrict results by and enter "Premiere Elements" in the Community field under Restrict results by.
There is a wealth of information in these forums that should be utilized and not faded into the past after it is viewed and pushed out of sight with the daily thread traffic. I hope your entry and my explanation of how to get there and do that, helps those in search of Premiere Elements answers old and new. If there is a shorter/better way to do this, please let us know.
Thanks.
ATR -
Looking for software that mirrors Streets and Trips
Hi Everyone,
For years I've used Microsoft Streets & Trips to plan hiking trips and travel across the world. I recenty made the switch to Apple and, of course, do not regret one aspect. Except, that is, that I cannot seem to find any software packages or applications that mirror Microsoft's Streets & Trips. Does anyone know of a program that may be similar and worth a try. It's difficult to explain all of the capabilities of S&T so here is a link to the software for comparison.
I truly appreciate any help!
-msmIf you're looking for some options other than Streets and Trips now that is has been discontinued, I suggest visiting http://mappoint-alternative.com/ - I found some great replacements for Streets and Trips there!
-
Software that is missing and a easy guide for new use
Somtimes, when we have a mp3, it just has the file name as information. So when we upload a whole bunch of mp3 files sorted for {0} until 999, or A until Z. Now when I want to upload it i fireup the zen micromanger explorer thingie, I create a new map, then I select my files copy > paste in the zen micromanger explorer thing and wait until it has uploaded. Then I add it to the playlist.
Now the problem! A lot of them don't sort automaticly in playlist while they are fine in the uploaded map(i.e in sequence). Why does this differ, and how does one fix this? What steps are exactly required to fix this?joefso wrote:
Somtimes, when we have a mp3, it just has the file name as information. So when we upload a whole bunch of mp3 files sorted for {0} until 999, or A until Z. Now when I want to upload it i fireup the zen micromanger explorer thingie, I create a new map, then I select my files copy > paste in the zen micromanger explorer thing and wait until it has uploaded. Then I add it to the playlist.
Now the problem! A lot of them don't sort automaticly in playlist while they are fine in the uploaded map(i.e in sequence). Why does this differ, and how does one fix this? What steps are exactly required to fix this?
up -
Adobe has blocked my use of LR5 software that I bought and paid for. This happened when a trial Cloud subscription expired. Adobe is illegally seizing my property, and threatening my business, unless I can get this full access to LR5 restored immediately.
Charles S. GardnerOf course you got cut off from the creative cloud! It's a 30 day trial, and if you don't subscribe you can't use the software that you downloaded from the creative cloud. It will have to be uninstalled. Then you can install from one of these websites:
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7.1
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7.1
The program is identical, but licensing is completely different. And you cannot license the creative cloud installation with a serial number. The link I have given you it is for the trial version. When you start the program and the trial screen appears choose the option that indicates that you have a serial number. That will guide you through the process of entering your serial number. -
Need software that has passed windows logo testing
can not install the wireless Officejet 6500. The 6500 is installed on the network. Message while do installation is "windows logo testing failed to verify compatibilty with windows XP" installation will not go beyond this point. The odd part of this is that I had it installed at one time and then the installtion failed.
I have tried your XP solutions and here is the message I received "an error ocurred during installation. The driver can not be installed because it is either not digitally signed or not signed in an approtriate manner"
Where do I go from here?Hi callison11,
On the Software Installation screen with the 'Windows logo testing ' error, click Continue Anyway .
NOTE:You might receive more than one prompt about the software not passing Windows logo testing. Click Continue Anyway each time you receive the prompt.
Windows logo testing is part of Microsoft's WHQL (Windows Hardware Quality Lab) program, which helps customers identify products that are compatible with the Windows operating system. WHQL certification is not related to product functionality. You can still install and use the HP printer and software without the WHQL certification.
2. Follow the on-screen instructions until you get to the Found New Hardware Wizard screen. This screen might include a list of products and prompt you to Please select the best match for your hardware from the list below . Leave the selection at the default, and then click Next .
3. Continue following the on-screen instructions to complete the HP software installation.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution -
I have a MacBook Pro 10.6.8, 2.66 Ghz, 8GB memory 1067Mhz running Snow Lepard. I am going mad with trying to organise emails and cross reference to file documents, also the first model iPad.
Does anybod know if there is any softeware - pages or otherwise that can copy emails automatically to document files and insert them in dated order and also that the file can be reviewed like a book by flicking from bottom right hand corner iPad book style.
Please help me run my contracts easily, it shouldn't be difficult in this day and age.
I currently use Apple 'Mail' and microsoft word but am considering any new software that can organise and integrate mail better. I use photo inserts and scanned documents and excel spreadsheets.No, I don't know about that kind of software. It isn't Pages anyway. You need somekind of database.
Maybe you are looking for
-
HI! I want to add to Creator 2.1 (Windows version) an EJB module that I have created with Netbeans 4.1 using the Facade approach. To do this I have perfectly verified and deployed the EJB module on deployement server, but when I try to add the ejb mo
-
I have written a rather complex system that uses smoke, mirrors, and occasional subterfuge to display web pages. I noticed that the CFFORM javascript controls weren't working on some of the end-of-the-line cfm pages. Through trial and error, I discov
-
What Can I Do About This Error?
I have 2 form programs. The first program is the main menu. The user pushes a button and the program transfers control to a second form program. On this second screen, the user enters an SSAN. At the bottom of the screen there is a message which says
-
FF4, slower, crashes more, problems with more pages, inconvenient
Been a FF fan for a decade. But I fail to see any of what all the rave reviews say about FF4. Instead, my family of 5 are all complaining to me that FF4 is slower, crashes more, can't open more pages, they can't find where FF4 "hid" what they use to
-
Good afternoon. Product Adobe Muse serial number requests. What to do? I paid for a month, but I work in the trial version. If you can not make out, it will no longer use the services.