This has probably been covered before-analog surround sound/usb soundcards?

just wondering if this is possible, or if there is such a thing as a USB 5.1 soundcard that works with Macs. The information I've found says 2 channel only
any rebuttals welcomed
JB

The only USB adapter known to work for the Mac has long since stopped being developed. However, there is a Firewire adapter:
http://www.griffintechnology.com/products/firewave/

Similar Messages

  • Password Complexity problems on fresh install of Server 2012 R2, This has not been answered before....

    Hello all,
    I have a problem that I can't find the solution to. I have found others with the same problem but the answers provided to them were not the exact situation I am in currently. Please read all the text and see if you can answer this...
    I downloaded a copy of Windows Server 2012 R2. I am installing it on a stand alone PRE OWNED server which is a Dell R900 quad quad core server with 16gb ram and 500gb drive. The drive has been initialized and configured perfectly and windows server has been
    loaded.
    Upon the start of it, the screen appears that tells you to change your password for the admin account. Upon putting ANY (and I do mean ANY) password in there regardless of the complexity, the machine comes back with ..." The password you typed does
    not meet the password complexity requirements set by the administrator for your network or group. Get the requirements from your administrator, and then type a new password."
    I have tried new drives with no luck, I have tried everything that one can try on this (except the right thing of course). My guess is that the machine retained some crazy complex password file and stored it in an EEprom on board. If this was a factory fresh
    machine, I would guess that this wouldn't be an issue as there was no file created yet that the machine is running it's scripted denial from. So... Does anyone have the exact method for eradicating this file or changing the domain controller or file that
    controls this complexity problem WITHOUT HAVING TO LOG INTO THE MACHINE since as I said, you can't log into it. I even tried to go in through Linux to find the password in the SAM and since it's a new copy of windows, and there is no passwords in there, it
    couldn't find the file since the admin acct wasn't set up yet (but that domain controller is working it's butt off and keeping me out I tell ya! lol)
    Any help would be appreciated more than you know! ...Scott

    Hello Phillip,
    Thanks for the reply! Yes, the drive was put in the machine with no other drives (500gb SAS) and installed/initialized without incident. The DVD was put in the DVD drive and the OS was installed on the machine. As the machine starts up again after
    install (reboots) the text comes up that says that you have to change the password on the administrator account due to this being the first install of the OS. I put in a password, and then put it in again, then get the statement about the password being entered
    doesn't meet the complexity level set on the domain controller and to contact the admin of the network. I then looked up what that was referring to and used a series of passwords that should have worked as they matched the exact complexity that windows stated
    in their tech knowledge base. Such as ... P@ssw0rd and another like Pass\/\/0rd!! as well as quite a few others with various names and symbols. Each time meeting or exceeding the 8 chars with upper and lower case with symbols
    present. Each and every time that complexity statement in yellow comes up.
    I tried changing and initializing 2 more disks and downloading another copy of windows server 2012 R2 and tried it all again. Still the exact same thing. I have never seen anything like this before. I have installed windows server 2003 and 2008 in the past
    many times without errors like this but this one really has me beat as to what is wrong.
    I read a tidbit on a way to go to DOS and take some files from the DVD and copy them to certain locations on the drive the OS is installed on. That is supposed to write over the files that provide the complexity issues but where ever I saw it, they didn't
    go into detail as to what exactly to do. I know others have had the same problem in the past but every answer I can see either doesn't address the question or provides the wrong answer altogether.
    That's why I am posting here in a last ditch effort to save this project since the same exact problem is happening when I tried to install windows server 2008 R2 as well. I thought I may be able to just go with 2008 and get that running without the issue
    but when I wipe the drives completely, and reinstall onto the drive the 2008 version, the exact same thing comes up.
    If you have a solution, I would love to hear it! Thanks again...Scott

  • I know, this has probably been asked a million times, but....

    I'm working on a website using iWeb and I want to embed a forum on it. I'm currently using a forum supplied by webs.com by embedding the HTML code they gave me on the page (which is what I'm supposed to do with it.)
    Whenever I click on the various board within the forum, however, they open in a new frame, instead of the same frame. I'm not sure how to fix this. It happens in both Firefox and Safari, but a friend of mine says that it works just fine for him in IE. Anyone know how to fix this or where I can get a better forum that is easy to embed and doesn't require an installation on the server side (webs.com doesn't really let you do that....)
    Thanks
    Mike
    null

    Like this:
    Where it says "FORUM GOES HERE" you use the embed code from your forum (actually, you can put anything there, like I did with the News Feed on my Home page www.emceese7en.webs.com/site/home.html)
    You can adjust the size of the box using the width and height in the code (currently at 950x952).
    Sorry it took so long to get back to you! Hope it works out for you. Also, since it turned into a box when I posted the actual code, I had to post it as an image. Sorry about that!
    Sev

  • When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?

    When i try to do a software update, it finishes and then says that the update cannot be saved because it has probably been corrupted during the download. This has happened a number of times and i do not know why, any help?

    asifmanzoor wrote:
    i have 10.7.2, this download is 10.7.5
    Are you Downloading it from here  >  http://support.apple.com/kb/dl1582
    asifmanzoor wrote:
    yes, i am using wifi
    1)  Turn your Wi-Fi router OFF... wait 30 seconds... Turn it back ON.
    OR...
    Do not use Wi-Fi and connect Directly to your Internet via ethernet cable.

  • Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    hello,
    After installing the Adobe reader, I got the following error message:
    Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

  • I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For mo

    I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file

    For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

  • Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login.  This screen shows up on opening the computer and has never been seen before the last month or so.

    Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login.  This screen shows up on opening the computer and has never been seen before the last month or so.  It has one box titled Login Credentials with a username and password field and a second box titled Login Status at the bottom where it says "Profile not found" in red.   I've never seen this before and ignoring it does not effect any operations.   Is this legitimate or some kind of identity fishing?

    Hello,
    Have you done the recent Security updates?
    Is this from Sleep or on bootup?
    Timing is about right for the FlashBack attack.
    Disable Java in your Browser settings, not JavaScript.
    http://support.apple.com/kb/HT5241?viewlocale=en_US
    http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
    http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
    Flashback - Detect and remove the uprising Mac OS X Trojan...
    http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
    In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
    /Library/Little Snitch
    /Developer/Applications/Xcode.app/Contents/MacOS/Xcode
    /Applications/VirusBarrier X6.app
    /Applications/iAntiVirus/iAntiVirus.app
    /Applications/avast!.app
    /Applications/ClamXav.app
    /Applications/HTTPScoop.app
    /Applications/Packet Peeper.app
    If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
    http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
    http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
    The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
    https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
    More bad news...
    https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link

  • How do I enable an update on a 3GS which has never been updated before?

    I need to update iPhone 3GS, as it has NEVER been updated before. Under the general/settings, there is no update icon available! How do I install this?

    The Update option on the device is only available in iOS5 and later.
    Connect the device to the computer and update via iTunes.
    How to update iOS devices

  • This has never been a problem in the past, but when i insert a CD into my macbook, iTunes does not ask me if I want to import it and it ejects the CD.  I have tried several different CD's and can neither play nor import them.

    This has never been a problem before, but when I insert a CD, iTunes does not ask me if i want to import the songs.  It will not play the CD and ejects it.  I have tried several different CDs and cannot import or play any of them.  I can play songs that are already in my library Suecq5

    Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    and PRAM How to Reset NVRAM on your Mac - Apple Support
    If that doesn't help you can try a cleaning disc, or a shot of compressed air but chances are good that your optical drive has failed. You can either replace it or buy an inexpensive external unit (but not Apple's as it won't work on macs with a built in drive working or not).

  • Laptop easy been disabled again once W7 has successed been install before anti-viru program is On

    Hi there,
    I find out a strenght thing that my laptop seen very easy been disabled again once W7 has successed been install before anti-viru program to be installed/Switched on. It look at W7 has confick with HP setting or what ever is the case. I need help to solve this before I could really complete the installion on it; ASAP, as the new term has started yet.
    Thanks, anybody
    Tomme
    This question was solved.
    View Solution.

    When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
    Please provide more details about your issue... What are you trying to do??? What BIOS settings have you changed??? What kind of media you are trying to boot from???
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Sorry if this has already been asked. Just got the newest i-pad had a bit of difficulty getting the charger in and now nothing not charging. HELP

    Sorry if this has already been asked. Just got the newest i-pad had a bit of difficulty getting the charger in and now nothing not charging. HELP

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
    ~~~~~~~~~~~~~~
    FYI
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

    Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

    Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks.  If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?!  I've rebooted the iPad & my wireless card several times but neither action helped.  Have any clue what I should do now?

  • My ipad will not connect to wi-fi. I lost it after updating os7. Friend got it to work in CA but coming home to AZ it will not connect. Another thing why are they asking for password when I try to pick location, to my knowledge this has not been asked

    I have a problem with my wi-fi cant get to work, I will pick a server then they ask for a password, to my knowledge this has never been asked in the past/ This happened with I installed OS7. A friend in CA was able to connect but when I returned to AZ I have not been able to setup the Wi-FI.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My S5 shuts down on its own with no warning, no rhyme or reason.  It attempts to factory reboot when it does it too!  It freezes up at least once a week and becomes a $600 worthless brick.  This has all been happening since day two that I got it.  Went ba

    My S5 shuts down on its own with no warning, no rhyme or reason.  It attempts to factory reboot when it does it too!  It freezes up at least once a week and becomes a $600 worthless brick.  This has all been happening since day two that I got it.  Went back to Verizon store and they told me nothing was wrong with my phone and they would not replace it.  I'm at my wit's end.  HELP!

    BambieS5,
    Sorry to hear about your trouble with the s5! Does the trouble that you are having persist in Safe Mode? http://vz.to/1xp1XUi . Does the battery have any signs of cracking, corrosion or swelling?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Mera, (this has always been sucessful) however the pictures would not download, and appear to be encrypted and unable to view.  This also erased the pictures from the memory card. Help?

    I tried to download my pictures with my memory card from my camera (this has always been sucessful) however the pictures would not download, and appear to be encrypted and unable to view, also not saved in my 'Iphotos'  This also erased the pictures from the memory card. Help.....anyway of retrieving them?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    did you get a message when trying to import from the memory card?
    did you use a card reader?
    what was you exact workflow for attempting the import?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library? See image below:
    what type of Mac?
    how much free space on your boot drive?
    OT

Maybe you are looking for