This has to be so simple

http://www.raiseupart.com/artists_Vol2.html
I've just started building this site. I don't understand why
it's showing up this way on the server b/c in Dreamweaver the file
looks perfect. Why is this happening? I can't figure it out and
I've never had this happen before, weird.
thanks!

melrox wrote:
>
http://www.raiseupart.com/artists_Vol2.html
>
> I've just started building this site. I don't understand
why it's showing up
> this way on the server b/c in Dreamweaver the file looks
perfect. Why is this
> happening? I can't figure it out and I've never had this
happen before, weird.
>
> thanks!
>
It would help to know how you **want** it to look.
Bonnie in California
kroko at
sbcglobal dot net
http://www.theanimalrescuesite.com/cgi-bin/WebObjects/CTDSites.woa

Similar Messages

This has to be something simple

I'm trying to get to the point where I can develop JSR-168 portlets. I'm using JDeveloper 10.1.2 and the portlet wizard. I've created a simple Hello World portlet. I've also downloaded the pre-seeded OC4J, which is what I'm deploying to (if there's a better way--i.e., if I can use the oc4J that comes with JDeveloper, please let me know).
Deploying works fine. I'm having trouble, however, registering my local provider with our portal server. I get through the wizard as far as step 3 of 3, where it tells me:
There are no registration properties required by the provider for registration.
At this point, I get a message on my local pre-seeded oc4j which says:
07/01/24 10:47:19 Warning a client is using a different version of the ormi prot
ocol 1.0 != 1.1
This tells me that our portal has indeed contacted my local provider. I don't know if the warning issued means anything, though. If I click the finish button on the wizard, I then get the following error:
Error
An error occurred when attempting to call the providers register function. (WWC-43134)
An error occurred during the call to the WSRP Provider: Java stack trace from root exception:
java.rmi.ServerException: Internal Server Error (caught exception while handling request: oracle.webdb.wsrp.server.ContainerRuntimeException: An internal error has occurred in method <init>)
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:384)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:245)
at oracle.webdb.wsrp.WSRP_v1_Registration_PortType_Stub.register(WSRP_v1_Registration_PortType_Stub.java:183)
at oracle.webdb.wsrp.client.design.v1.OraWSRP_v1_Registration_PortType.register(Unknown Source)
. (WWC-43273)
I've looked up both of those WWC errors, but they don't give me anything to go on (the first one is an error when attempting to call the provider's register function, and the second is an error occurred when getting the service description).
I'm reading all about people developing and deploying JSR-168 portlets using JDeveloper and Oracle portal, so this has to be a problem that people have overcome. Any suggestions?
Thanks!

Okay; I figured this one out. I needed to create the database table mentioned in the Portal Developers' Guide. So much for "simply download, extract, and start OC4J." I can now register my portlet provider, and I can run a simple Hello World portlet from my local container on our portal server.
Now I'm trying to figure out how to debug a portlet (i.e., step through the code). If I try to remotely attach to the container running my portlet, JDeveloper can never find the container.
Because of the lack of replies to these posts, I have to wonder, is anybody else doing this? Is there anybody out there who can help me get up and running?
Thanks!

Hi when I stream video content to my Tv using Apple from my Ipad3 I find the Ipad goes to sleep after 2/3 minutes and disconects, the only way I have found to stop this is to continually tap the Ipad screen but there has to be a simpler method/ any help

Hi when I stream video content to my Tv using Apple tv from my Ipad3 I find the Ipad goes to sleep after 2/3 minutes and disconects, the only way I have found to stop this is to continually tap the Ipad screen but there has to be a simpler method/ any help would be most welcome.

Welcome to the Apple Community.
Contact the developer of the Air Video app.

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

Hi Vivek,
Thanks a lot for replying, actually i am creating a short LAMP animation. In which i used Blur filter on the fire flares(SVG images), everything works just fine on google chrome, but for IE10 & Firefox the filter seems not working, so i need to know is it possible to override the fallbacks for the Blur Filter through external StyleSheet.
IE10 & firefox rendered Image, blur filter not working Google Chrome rendered Image, blur filter working perfectly
So, can you please guide me, what shall i do in maintaining quality of my graphics as well while such animation's.

This has to be Simple !

Hello, this i think is a simple one,
I have made a site, with 4 pages, made with tables. The site
is rectangle in shape, with margins left and rite.
In the top table, there is the company logo. I have text in
the index page, and it all looks nice, but when i paste more text
for other pages (approx twice the amount of the index page) the top
table shifts up, and the bottom table shifts down a liittle -
inconsistent with the index page, and i do not want this, it looks
poor when viewing in a browser. Is there a way to have the top
table hold its position on the page when entering in alot of text
and other items?
I do not know CSS, still to learn !
I hope someone can help, this is doing my head in !!
Thank you so much in advance,
S

Post a link to the pages, please. The answer would be in your
code.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"simey70" <[email protected]> wrote in
message
news:fljmc7$b9b$[email protected]..
> Hello, this i think is a simple one,
>
> I have made a site, with 4 pages, made with tables. The
site is rectangle
> in
> shape, with margins left and rite.
>
> In the top table, there is the company logo. I have text
in the index
> page,
> and it all looks nice, but when i paste more text for
other pages (approx
> twice
> the amount of the index page) the top table shifts up,
and the bottom
> table
> shifts down a liittle - inconsistent with the index
page, and i do not
> want
> this, it looks poor when viewing in a browser. Is there
a way to have the
> top
> table hold its position on the page when entering in
alot of text and
> other
> items?
>
> I do not know CSS, still to learn !
>
> I hope someone can help, this is doing my head in !!
>
> Thank you so much in advance,
>
> S
>

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please researc

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.

Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed?

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...

The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar.

So, I know this has been asked before. But, has anyone heard from Apple?

So, I know this has been asked before, but I'm just looking to see if anyone had heard from Apple on this at all. The minimum volume on my iPod Classic 160gb is too high, and I can't lower it. (AKA when I kill the volume, I can still hear music).
I called them today, but the rep was pretty useless. He even dropped the "well, just press pause" line on me. Took him a while to understand that when I'm in bed or studying, etc. the minimum volume is too loud, and I wanted to be able to set it lower.
The best workaround I've found so far is to buy headphones with their own volume control, but I just can't help but feel that someone shouldn't have to by additonal gear after buying this thing on account of such a basic feature exclusion.
Anyways, thanks for any help !

Wow, easy there company boy!
I've heard all of what you spit up before. And for your point of "Well, in several cases, people have complained (here in these discussion pages), that they expect the volume to be zero when turned to minimum position" that kind of ties in to why Apple should fix this.
And yeah....it's pretty much a given that "you and I have different interpretations of what constitues too loud" This is where the option to adjust the minimum volume comes in to play. (I relly feel bad for you. Honestly. Having to live everyday of your life this way must be just brutal)
The wording would be pretty simple too. " Be aware there are many instances of the minimum volume being too loud, so think twice before dropping a few hundred bucks on this"
And, you're right. It is horrible to 'whine' about being ripped off and asking if there is a possible fix for the issue. I really do apologize for that. I should just suck it up and not voice my opinion that this is not fair to consumers, and Apple shouldn't fix a known issue with a product.
I did reset & restore, I figured that was pretty much implied since I said I spoke to Support.
And I am not at all surprised that you would say "I - for one - am not surprised that Apple might say, "simply hit the pause button"." Again, I don't want it on muteReading your post made my eye twitch at least three times.
This is exactly the reason I was resitant to post on a forum. But, I got a good laugh anyways. Thanks guy!

I know this has been said BUT K8N plat won't post

I am at my wits end with this damn thing. I have installed a ton of PCs and never as much trouble as I have with this AMD64 3000. First I ordered it with the Chaintech 150 board after reading great reviews on it. That was my mistake for not looking at the forums to see what the real users say.
OK after RMAing the board back and forth and getting jack I gave up on it, set it aside and got the MSI K8N. Installed it with the things below only and actually got the power to stay on only to lock on keyboard and not post.
I then read everything I could find in forums and tried everything that was suggested on top of what is the usual steps and got squat. I am wondering now if the board is bad and I need to RMA it. Has anyone found a fix to this post problem as I see a lot of people have had it. I can tell you that my board is not shorted out, I tried other ram and am convinced that is not the problem. Went and bought a new USB keyboard I did not need and still crapo. God what I would not do to see a bios screen or even a post!
Any other suggestions? If I RMA this and get the same damn problem I swear I am going to start looking for my chainsaw!
2 months and counting while Doom3 sits unopen!

OK I tried moving the SATA connect to all the other 3 plus I moved the mem. I think now I have tried about every combo with the mem and have had no luck.
One thing that I didn't mention as I thought it was part of how this mobo sets up, but as soon as I plug in the power cable and turn on the PS the PC powers up. I then can control it via the power switch., but if I unplug it then it will repower as soon as the plug is reinserted.
I let iit sit in this error state for quite some time also and it doesnt appear to be a heat issue. There has to be something simple that I either did wrong or am missing. I have read a lot of post of people with this exact same problem and now I am getting emails of more having the problem and asking me to let them know what worked. It would have to have been a really bad Monday at MSI for this many boards to be faulty(and that is humor as I think it has to be something I am missing).
Oh and the Chaintech board would powerup for a split second then shut off. It never made it near a post . Read someplace that Corsair mem would not work with the Chaintech (plus many others) and decided to switch to the mobo choice most forum people were suggesting for a AMD64.
I appreciate all the suggestions.

I am frustrated trying to download the latest update. I get an error message 126 and this has been reported on many other forums.

The latest update does not work. I continue to get an error message 126. I am frustrated that the update does not work and this is being reported on many other forums. Apple needs to pick up it's game. Very dissappointed. Has anyone got a simple fix ?

Hey dutch5,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

When I try to update my macbook air to the new OS X Maverick it say unknown error and to please try again later. This has been going on for a few days and was hoping someone can help. Thanks.

When I try to update my macbook air to the new OS X Maverick it say unknown error and to please try again later. This has been going on for a few days and was hoping someone can help. Thanks.

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
Michaelgfrommet

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Why is there way too much extra info attached to my photo cd, when I simply burnt only 6 pictures on it? This has been happening for months now.

Why is there too much extra info attached to my photo cd, when I simply burnt only 6 pictures on it?
This has been happening for several months now.
It used to work correctly.
For example:
I burnt a photo file of 25 pictures from my iphoto collection.
When I went to the store to print them, the computer indicated there were 155 photos on it.
All were cropped versions of my 25 pictures.
Weird.
Then when I only burnt 6 pictures today onto a cd, I took the disc to a Print Shop.
Sure enough, the disc had other data and files associated with photos on it.
Yes, my 6 were on it, but the Print Shop had to spend extra time searching for them.
What's uP?

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please help. I have tried lots of things now and cannot solve it.

When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please can someone help. I have tried lots of things now and cannot solve it.

"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done.

This has to be so simple

Similar Messages

Maybe you are looking for