This iphone is already activated. You may disconnect this iphone now
how can I reslove this problem??
Try this:
For Mac OS X users:
Make sure iTunes isn’t running and then open Terminal.
In Terminal, enter a command:
To turn activation-only mode on: defaults write com.apple.iTunes StoreActivationMode -integer 1
To turn activation-only mode off: defaults delete com.apple.iTunes StoreActivationMode
For Windows users:
Make sure iTunes isn’t running, and then open a Command Prompt window.
Enter a command:
To turn activation-only mode on: "C:\Program Files\iTunes\iTunes.exe" /setPrefInt StoreActivationMode 1
To turn activation-only mode off: "C:\Program Files\iTunes\iTunes.exe" /setPrefInt StoreActivationMode 0
Similar Messages
-
I have two laptops and 1 iphone:
Home - Macbook Pro
Work - Windows 7 netbook
iPhone - First hand, bought from my own service provider, never drop on the ground or goes into water
I only sync my iPhone 4 with my mac before. 3 days ago I updated iPhone firmware to 4.3, updated iTunes 10.2.1 in my mac, and installed iTunes 10.2.1 on my work laptop as well. I tried to connect my iPhone to my work laptop to see if everything works well. And I also back up and sync my phone before and after the iPhone firmware was updated. Everything seems fine.
2 days ago, I was playing games on my iPhone. My phone was suddenly being laggy. I rebooted my phone and then I tried to sync my iPhone with my mac as usual. However, a message pops up saying "This phone is already activated. You may disconnect disconnect this iPhone." every time when I connect my iPhone to my mac. So I pressed ok, but the phone kinda automatically ejects by itself from my mac iTunes. (i.e. iTunes no longer connects to my iPhone. iTunes doesnt even show the iPhone page and I cannot even restore my phone.)
Yesterday I tried to restore my phone with my mac and my work laptop by putting it into DFU mode.
1. After I restored the phone with my mac, I restored the back up with my work laptop after. After the phone was activated through windows iTunes, I connect the phone back to my mac and the same message pops up again saying "This phone is already activated. You may disconnect disconnect this iPhone."
2. After I restored the phone with my mac, I simply set it as a new iPhone. After the phone was activated through mac iTunes, the same message pops up again.
3. I restored iPhone with my work laptop. The phone stays connected with windows iTunes. After the phone was restored and set as a new iPhone, the phone was activated but no such message pops out. I can sync my iPhone like normal. No more automatic disconnection.
I tried to remove mac iTunes 10.2.1 and downgrade it to 10.2, but the same problem occurs every time when I connect my phone to my mac.
Since my work laptop is a netbook, the capacity is pretty small. I dont think my work laptop can always keep the 9GB back up of my phone, but the face is that I cannot lose all the stuffs in my phone. The best would be my phone being able to sync with my mac again.
... Could someone help with this problem? Or is there any like technical support? Is there anyone who have the same problem as well?Try this:
For Mac OS X users:
Make sure iTunes isn’t running and then open Terminal.
In Terminal, enter a command:
To turn activation-only mode on: defaults write com.apple.iTunes StoreActivationMode -integer 1
To turn activation-only mode off: defaults delete com.apple.iTunes StoreActivationMode
For Windows users:
Make sure iTunes isn’t running, and then open a Command Prompt window.
Enter a command:
To turn activation-only mode on: "C:\Program Files\iTunes\iTunes.exe" /setPrefInt StoreActivationMode 1
To turn activation-only mode off: "C:\Program Files\iTunes\iTunes.exe" /setPrefInt StoreActivationMode 0 -
when I wanted to downloaded the new software the phone went of and in my computer saying iTunes has detected an iPhone in recovery mode. you must restore this iPhone before it can be used with iTunes,
my hone is off pls help i need to make calls as i use my phone for work ,
Many Thanks
kerrySo do what it says and restore the phone. Nothing else you can do.
-
trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem. -
I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- EvenstarlineHi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account. I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well. I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline -
HT1296 How do you sync iphone and PC when you have two different iphones/users?
How do you sync iphone and PC when you have two different iphones/users in house? I just tried to sync my iphone and cancelled sync becauase I saw it was updating my phone with my husband's apps! How do I make it so that sync can distinguish between my and my husband's phone?
I sync two iPhones and an iPad with one iTunes library on the same computer and each device has different content. Each device has its own sync preferences with iTunes. You can transfer the same music and apps to each device or different music and apps.
Are you sharing the same Apple ID or iTunes account? -
I reboot the computer, deleted and restart itunes, change computer, change cable, check ping, check connection. need help
Step by step
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad -
I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring. How do I restore it? I cannot get my phone on at all?
Click restore in itunes.
-
How do i cancel it?
What do you mean by "cancel it"? If you mean that you wish to lock or erase the iPhone, you'll need to have set up Find My iPhone before you lost the phone, and if you did you may be able to locate it, lock it or erase it though icloud.com; go to the Find My iPhone section.
If you did not set up Find My iPhone before you lost the iPhone, then all you can do is notify your cell carrier and the police, and change any passwords to accounts you used from the phone.
Regards. -
"online purchase for an iPhone 4s" should say "Some may purchase an iPhone online"
Apple says "online purchase for an iPhone 4s" it should say "Some may purchase an iPhone online" at the end of filling out the forms it informs me that I have to visit an Apple retail store -- not going to travel 150+ miles to get to an Apple store -- Sales reps via phone can not help.. AT&T says nothing is wrong with my eligibility. They say it is on Apple's end.
The warranty is valid only in the country in which it was originally intended for sale by Apple. The only exception is the EU, where the warranty is valid anywhere in the EU (as long as the phone was originally meant for sale there).
-
When i check my imei or serial number i see : please activate your iphone. What is it? I buy this phone used, phone manufactured date is august 2012.
Can you tell me with this phone all ok?Pnone is newerlok. Phone is used, 9 mount old, then phone must be activated earler. Because phone work with any sim card.
Maybe promlem with apple id? because i make reset, then make new phone with my apple id.
Somewhere i read about : you have to wait 90 days for that would connect the phone to another apple id?
This is corect?
Or with my phone something wrong?
serial: dnqj62vsdtc0 -
How to Activate an already Activated Straight Talk Sims on Iphone 3gs?
Hello everyone! I am in a bit of a dilema,
Previously I have had Straight Talk for over a year now on my iphone 3gs.
Though today I accidently upgraded my iphone 3gs to 6.0, and it reset Everything for me. It brought me back to the activation screen, yet I could not get past the activation screen. Itunes kept telling me, "We're sorry, we are unable to continue with your activation at this time".
I found a way to bypass the activation set up (http://www.youtube.com/watch?v=7hk5Tm_m91Y) and then I realized I was still not getting any talk or service at All. At this point most everyone else has had no trouble activating their iphones with Straight Talk just fine enough to make a call.
Is there something I can do? I don't know how to get my Straight Talk service back, even with my sims card in my phone and everything:(
Thank you in advance to anyone who is willing to help me,
-Nina Mariethe error is: Your iphone could not be activated because the activation server is temporarily unavailable. Try connecting your iphone to itunes to activate it or retry in 2 minutes.
If the problem persisits, contact apple.com/fr/suppport . -
If you cannot install or run iTunes 7.5, you may try this
1. If the installer complains that it cannot find itunes.msi or cannot remove previous iTunes or Quicktime, try exit any running iTunes or Quicktime application, remove all iTunes and Quicktime (including Apple mobile device) installation registry entries (and other corrupted installations) with Windows Installer cleanup utility (http://support.microsoft.com/kb/290301) and manually remove c:\program files\itunes, c:\progrom files\quicktime (and c:\program files\common files\apple if it exists) folder (the exact path may differ depends on where you install Windows on), then run the iTunes 7.5 installer again.
2. If iTunes 7.5 crash on opening and Quicktime player also crash or malfunction, this is the problem of the included Quicktime 7.3. remove it in Add/Remove Programs (XP/2003) or Programs and Features (Vista) and try download and install an older Quicktime (7.2 (http://www.apple.com/support/downloads/quicktime72forwindows.html) , or 7.1.6 (http://www.apple.com/support/downloads/quicktime716forwindows.html) if you use incompatible driver of nVidia 7/8 series display card and/or some RAID configuations).
3. If you still have problems try set Quicktime to safe mode (open Control Panel\Quicktime, select Advanced and select Safe Mode (GDI).)
somebody reported that iTunes 7.5's CD-ROM related features cause BSOD on some systems. Currently no way can fix this.It's bundled with 10.5.3 and newer and can't be installed separately on those OSes.
(59310) -
I have been having this problem for few weeks I tried to unistall it and reinstall it still didn't work I also tried to delet the shortcut by draging it to Recyle bin and find the iTunes through the c drive and send the icon or even open it from there still didn't work so I really need help here.
Thank youOk. seems like I am in bigger problem than what i thought..So i did what you asked me and here is the log from the scan
Malwarebytes Anti-Malware (Trial) 1.62.0.1300
www.malwarebytes.org
Database version: v2012.07.25.04
Windows 7 Service Pack 1 x64 NTFS
Internet Explorer 9.0.8112.16421
[administrator
Protection: Enabled
7/25/2012 8:34:03 PM
mbam-log-2012-07-25 (20-42-53).txt
Scan type: Quick scan
Scan options enabled: Memory | Startup | Registry | File System | Heuristics/Extra | Heuristics/Shuriken | PUP | PUM
Scan options disabled: P2P
Objects scanned: 239337
Time elapsed: 7 minute(s), 52 second(s)
Memory Processes Detected: 0
(No malicious items detected)
Memory Modules Detected: 0
(No malicious items detected)
Registry Keys Detected: 1
HKLM\SOFTWARE\Google\chrome\Extensions\fdloijijlkoblmigdofommgnheckmaki (PUP.Funmoods) -> No action taken.
Registry Values Detected: 0
(No malicious items detected)
Registry Data Items Detected: 0
(No malicious items detected)
Folders Detected: 0
(No malicious items detected)
Files Detected: 3
C:\Users\mer\Downloads\7zip_Setup.exe (PUP.Bundle.Installer.OI) -> No action taken.
C:\Users\mer\Downloads\Setup.exe (PUP.Bundle.Installer.OI) -> No action taken.
C:\Users\mer\Downloads\SoftonicDownloader_for_mkv-player.exe (PUP.ToolbarDownloader) -> No action taken.
So I removed everything and did the restart but still didn't work, the I used Microsoft Security Essentials and find this one: TrojanDownloader:ASX/Wimad.DS and the alert level was severe so I removed too and the problem was still there even after restarting the computer, Now I am kinda lost and I dont Know what to do. -
I hit the command + shift +3 or 4 and spacebar and /or mouse pad and nothing happens. HELP...what is going on?
should still be there, appelle
hold down command and shift together,keep holding 'em down, then press 3 or 4. check to see if your function keys are active. also, turn up your sound, you hear a 'click' or 'kachunk' like someone took a picture when it's successful, otherwise, try something called "Grab".....
John B
Maybe you are looking for
-
(Solved) Audio in Flash
Hi, I am new to these forums and Arch Linux. I am a converted Debian user. So far, I find Arch extremely efficient and nice. The community in particular is extremely helpful. On to my actual problem, I cannot get audio to work in flash videos. Whi
-
AUTO-CREATE LONG LIST BY USING CRITERIAS FOR APPLICANTS
Hi, By defining criterias, is it possible to automatically create the long list on the system for suited applicants? Thanks in advance
-
Shading in Smartforms..
Hi, I want to shade the header fields in my table. I am displaying 2 tables in my smartform. Currently, I have created a window and given the Shading value as 10. And it displays correctly. But, for certain conditions, the 2nd table should not be di
-
Got a newcomputer and now firefox crashes alot.always on facebook. why?
i got a new computer and now firefox crashes hourly. I downloaded the latest version of firefox and now i have windows 7. the crashes always happen in facebook. why does this happen on a new computer? the computer is 3 hours old == Crash ID(s) == htm
-
About Upgrading to Apple Mac OS X Mavericks?
ok I Heard Apple Mac OS X Mavericks is gonna be out in Fall or Summer but I Was not able to see The Apple Keynote Event today cause I Had to take My Grandmother to get her hearing Aid fixed today & I Was working for 2 hours today this morning & I Jus