This is a test of mark as question from Spell Check.
This is marked as a question in the main form. I will go to spell check and submit from there. If it isn't marked as a question it is because that setting doesn't persist to the spell check form and subsequent submittal. If that is the case how do we get that fixed?
Hi Doug,
Yes it is. The workaround is that one can go into the post and set the flag again.
I know this is not great, but works until we find the time to change it.
Best, Mark.
Similar Messages
-
I had this problem with the folder with the question mark in it
hello guys, so i had this problem with the folder with the question mark in it and now i just keep the options button pressed till it shows me the option to boot and so how can i get that solved and my mac can just boot normally and something else is that i press on system preferences and nothing happens it basicly does not exist so if you guys could help me it would be great
<Re-Titled By Host>It sounds like either the system on your disk drive is corrupt or the disk drive died.
Assuming the information in your profile is correct then boot from the install DVD for you MBP. From there you should be able to run Disk Utility to check out the disk drive. -
Inserting upside down question marks/Inverted Question marks into database
Hi All,
When I am inserting any special character into database it is
inserted as upside down question marks/Inverted Question marks.
When I am trying to display the same string throgh the application
the special characters are displaying as small square box.
NLS Parameters are as follows:-
NLS_LANGUAGE AMERICAN
NLS_CHARACTERSET UTF8
NLS_NCHAR_CHARACTERSET UTF8
NLS_RDBMS_VERSION 9.2.0.4.0
can any body help in this?
Thanks in advance.What are any "special character" and how do you insert them?
Have you verified what is stored in the db, e.g. with select string, dump(string,1016) from table ...
What character set (or locale) does the app/os use, and is NLS_LANG set accordingly?
The square box often means that the font used does not have the proper glyph to represent (display) a character. In your case this may be a consequence of improperly storing or retrieving character data. -
DO NOT REPLY this is a test post which will be deleted soon
DO NOT REPLY this is a test post which will be deleted soon
Mike WangAsk
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Ask
a question
Allow time to reverse. -
I am new to this site. this is a test
I am using snow leopard OS ...ever since an update a few days ago I have not been able to get into my mailbox. When I click on mail it tells me I cannot use mail 4.5 with my OS. Someone said I have to upgrade to lion ...is this true??
I am new to this site...........I hope this works
Thank youSorry, I must sound like a dope. I have never done this before. The part where I say (this is a test) is because I did not know if my question was going to show.
Thanks to anyone who can help. -
This is a test subject. Please ignore.
This is a test subject. Please ignore.
Hi,
I think this is what you're after:
http://ss64.com/vb/arguments.html
If not, can you please clarify your question?
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing) -
Is this the right forum for SharePoint Online questions?
Is this the right forum for SharePoint Online questions?
Hi Edward,
You could also ask the question in the forum below:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicessharepoint
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
this is a weird start to my question; but i went to a music festival today and I was in a mosh pit and it was hot, and my iPhone 4 turned off and I was wondering weather it was from the heat or something else? And what I could do to fix it? Thankyou
okay, thankyou for you help anyway
-
This is a test. Please do not reply to this post
This is a test. Please do not reply to this post.
Sorry everyone, I'm not able to post to the Safari category and I'm testing this category.Okay this worked, so why am I not able to post to the Safari for Mac category?
-
When i move the cursor into this button instead of Arrow mark i need hand i
Hi friends,
I have a button like below .
<input type=submit name="onInputProcessing(select)" value=" Material ">
When i move the cursor into this button instead of Arrow mark i need hand sign.
Moosahi use onmouseover event in your button and set the cursor style for button through java script
function cursor() -
> include this function between your script tag
var e = document.getElementById('select');
e.style.cursor ="hand";
call this function in your button onmouseover event -
This is in the category of "dumb" questions. I am adding a new iMac running
This is in the category of "dumb" questions. To my home office that includes
a 2003 power pc G5 running system 10.4.11, I am adding a new iMac running
Lion. Question - can you share files back and forth (e.g., a Word file, camera images) by simply
coupling the two computers through USB ports? As opposed, for example, by burning
a DVD and using that in the other computer.Why wouldn't you just use the network to share files, then? Simply set up a folder on one of your systems (I would recommend the Lion system) for sharing, turn sharing on, and then connect to it from the other system.
You might find this article useful. -
Did this update make a physical change? Branching from that question, will this update confuse lets say, a parent that isn't savvy?
Did this update make a physical change?
No
will this update confuse lets say, a parent that isn't savvy?
This will depend on whether they are savvy enough to open Macintosh HD > Applications > Utilities > AirPort Utility on their Mac , click on the picture of the AirPort, and then click the Update button.
It that sounds too complicated, best to let someone else handle the update. -
I am English but I live in Spain. when I try to download an app now, as well as my password i get asked to complete a security question from a list. The problem is the list is in Spanish. How can I turn this additional security off.
Please note: I dont speak Spanish.
Please HELPYou can't turn it off.
-
Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?
Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
This is a followup to my previous question.
This is a followup to my previous question.
The following code works:
MyRec.List[1].AdminObject:=createoleobject('NovellGroupwareAdmi n');
MyRec.List[1].AdminObject.ConnectByDN('SOMEDOMAIN.GROUPWISEOU.S OMEORG','SOME
-TREE' );
MyRec.List[2].AdminObject:=createoleobject('NovellGroupwareAdmi n');
MyRec.List[2].AdminObject.ConnectByDN('SOMEOTHERDOMAIN.GROUPWIS EOU.SOMEOU.SO
MEORG','SOME-TREE');
MyRec.List[1].Domains:=MyRec.List[1].AdminObject.Domains;
MyRec.List[2].Domains:=MyRec.List[2].AdminObject.Domains;
Having said that I'm getting iffy results when I try to do operations on one
domain then the other and back ... The Groupwise Admin Object api doesn't
seem to want to be connected to multiple groupwise systems, even with
multiple instantiations of 'NovellGroupwareAdmin'
Question 1:
1) Is there a way I can tell one instantiation ("You've got the football")
and have it work reliably, then do the same for the other when I need to
operate on it?
2) Is there a natural limit or restriction to this library that I'm
colliding with?
3) Has anyone had any success operating on multiple groupwise systems at the
same time?
Any help appreciated.That should work in theory... however the problem I'm running into is that the job will report a "fail" everytime no matter what because it loses connection with the remote host while it's updating the network drivers. However, on the server, all network
drivers are in fact updated. The only results I get from the receive-job is a timeout, but if I redirect the actual results from the command to a text file on the server, then just wait 15 seconds for the drivers to complete their install I can read what actually
happened. I'm not sure why the job is timing out. It waits for a good 30-45 seconds before timing out when the host is only blipping for about 10 seconds, but it never tries to establish a connection back.
Reading through, if our servers were updated with powershell 4.0 I could use the InDisconnectedSession
parameter I think... Hmmmm I'm gonna look into upgrading our powershell versions anyways.
Maybe you are looking for
-
I am using DW MZ 2004. Fairly new at game but not a complete novice. I am trying to test my site in the browser. I am using the Manage Sites Advanced utility. Currently these are the details for my site: Local Info: Site Name: BKSolutions Local Root
-
Ifs 1.1 - myTree is not an object ?
I have just installed 8.1.7 and ifs 1.1 on NT I brought up ifs via the webui and logged in as system/manager. It tries to bring up the next screen. I get the message "One moment please Loading". Then I get "error on page" at the bottom left hand corn
-
I built a website using iWeb 08 to display some photographs and published it to my personal domain via MobileMe. When I view the website in either Firefox (my primary browser) and Internet Explorer, the color quality of all the pictures is diminished
-
Logical standby failed with LOGSTDBY status: ORA-01281: SCN range specified
My logical standby datbase on 11gR2 failed with the above message. A search on the error says Error: ORA-01281 (ORA-1281) Text: SCN range specified is invalid Cause: StartSCN may be greater than EndSCN, or the SCN specified may be invalid. Action: Sp
-
How to view fields on screen but make non-printable?
I have a text and fillable field that I want to view on screen but not print. I selected the presence as 'Visible (Screen Only)' but when I print the fields also print. Any idea how I can make fields in my form both visible on screen but not printa