This is a wierd problem!

Hey guys!
*Please just read this first!*
THE INFORMATION BELOW HAS BEEN DOUBLE-CHECKED SO PLEASE BE RELEVANT WITH YOUR EXPERT SOLUTIONS!*
Me and my cousin both have the CURVE 8520. We both have the same OS (5.0.0.1067 platform 5.2.0.96)
We are both on the same GSM provider (warid pakistan). Our provider supports cell tower triangulation.
Here's the interesting part:
He is able to check-in on facebook but i can't! (I can assure you he has the curve 8520 and NOT the 8530)
(I know the curve 8520 does NOT have gps)
We're both using the latest facebook app (3.1.0.17)
(please refrain from telling me that he has the curve 8530 because:
1. our provider is gsm and i believe the 8530 is cdma
2. I have checked and checked again.
Any sloutions to this wierd problem will be greatly appreciated!
THANKS!

Hi abubakar91,
Welcome to the BB Community...
Thats kinda weird...anyways, try reinstalling the FB...might this will solve the issue...
Are u able to access other services which needs BIS service...???if not, then check with ur service provider...
with regards
simply abhik...
Please click "Accept as Solution" if your issue has been solved and to give thanks/appreciation, click thumbs up...
For BB OS update: http://us.blackberry.com/software/smartphones/update.html
BB Simulators: http://us.blackberry.com/sites/developers/resources/simulators.html

Similar Messages

Wierd problem with web start in windows 7

I have a wierd problem with my web start app in windows 7, it just hang it self. it work fine in windows XP and Vista.
The wierd thing is that i can open the app but when i press on a specific button that will make a jlabel present a .png image everthing crash. why do i get this problem now? when i start the app, i load some pic i jlabels and that seems to work fine, but when i do it under the exection it seems to crash, why?
Should i do something different to make the app work in windows 7?
I hope someone can help me out!!

You should:
a) open the console (java control panel, advanced options) and see the stackTrace (if any). If it's not there check for swallowing.
b) post a code snippet, to at least show how and where you retrieve the png. Possibly a SSCCE.
c) check if this happens also running as a standalone app (may be more Swing-related than JWS-related).
Bye.

Updating a databse using jsp. Wierd problem

Can anyone help me with this wierd problem.
I update a databse using:
stmt.executeUpdate("UPDATE status_table SET " + updateString + " WHERE login = '" + userLogin + "'");
The updateString is:
otrans_comments = 'Please submit certified true photocopies of your individual marksheets for each semester/year of bachelor's work as issed by Thapar Institute'
as collected by a HTML form.
Observe that there is an apostrophie in bachelor's and this would cause pblms. I do not want to restrict users from stopping the use of apostrophie and neither can I remove apostrophie using other Java.String methods.
Is there any other way?

And by the way if this helps. I make my updateString like this:
comma="";
updateString="";
for (Enumeration en=request.getParameterNames();
en.hasMoreElements();) {
String name = (String)en.nextElement();
String value = request.getParameter(name);
// added to replace ' with `
if(name.endsWith("_comments")){
String newValue=value.replace('\'','`');
value=newValue;
updateString += comma + name + " = \'" + value + "\'";
comma = ", ";

A wierd problem while encoding URLs

Hi all,
I'm facing a wierd problem with the java.net.URLEncoder class. The encode function in this class is used for encoding URL based on standards like "UTF-8" etc..
I need to encode the URLs, because i have to send this information in a XML to another server.. Here's what the URLEncoder is doing if i give it the URL
http://mydomain.com:80/myServlet?_fileName=filename.mp3&_useStreaming=true
its encoding this as
http%3A%2F%2Fmydomain.com%3A80%2FmyServlet%3F_fileName%3Dfilename.mp3%26_useStreaming%3Dtrue
but, all I wanted is to encode only '&' character ( as XML misinterprets this character with schemes ).
So, my question is .. is there any way that i can selectively encode the characters in the URL?
Any help wud be appriciated in this regard. :-)

I accept what you are saying.. URLEncoder encodes any string that's passed to it..
I infact have two different problems in hand.. The reason i mentioned only one above is because the solution to the first problem cud as well solve the second.. Anyway, here's the second problem ...
I'm recieving an XML from a server, where i get the URL info and i have to download the CONTENT from that URL.. Sample xml is given below
<Music>
<Singer>Tata Young</Singer>
<contentURL>http://myMusic.com/sexy naughty.mp3</contentURL>
</Music>
if you see the URL in the xml, that infact contains spaces in it.. I have my logic which checks if the given URL is a absolute URL or relative URL
if( relative URL)
I append "http://domain name:" stuff to make it absolute
else
i connect to the URL directly to get the Content
I'm using
URI i = new URI(str);
i.isAbsolute() method to determine whether its a absolute URL or not..
but this method doesn't seem to work for URLs that have spaces in them.. So, i encoded the URL and tried passing it to the method.. but it still doesn't work..
I probed into URI class itself and found out to my amazement that URI class assumes that URL contains only alpha numeric characters and few special characters like '+' , '/' , ':' etc..
Since the encoded URL has '%' character in it.. its not able to say that its a absolute URL.. Tht's the reason I asked for selective encoding.. ( say, which encodes only [space] character)..

Macbook Pro wierd problem

Hi! I have a brand new Macbook Pro 13" Retina Display with i7. I bought it brand new from Apple for about 2 weeks ago and something wierd happens sometimes. The keyboard stops working, and the touchpad. I can not move the mouse, and I can not press any buttons. This usually happens on YouTube or when watching a video, which makes me to force the Mac to shut down. Any suggestions to prevent this?

This is a known problem. See this thread.
https://discussions.apple.com/thread/5481839?tstart=0
You should of did something about it when you first had it. Apple has a 14 day No Questions Asked return policy for full refund. Now that you have had that Mac for more than 14 days you are kind of stuck with it and hope Apple fixes the problem.
There is a KB article on it also. Something about closing the lid for one minute when this fault happens.

Wierd problem in iTunes Match with iPhone 5

iPhone 5 with iOS6. I have a wierd problem. I have iTunes Match turned on. All of my songs show up when I tap Songs. All of my playlists appear when I tap on Playlists. Great. BUT, when I tap on Artists (my preferred view) it says No Music. What the heck?!? Works fine (great even) on my iPad.

I'm having the same problem. I can access my itunes match on iphone 5 via wifi, but when I'm using 3G/4G/LTE in get a error message stating my membership has expired. This only happens on the iphone 5. It didnt happen on my 4S and nor does it happen with my "New" ipad Verizon. I'm not getting kind of help via itunes express, which *****. I'm starting to realize the iphone 5 is a piece of junk.
screenshoot:
https://www.icloud.com/photostream/#A15oqs3qG2p5MK

Wierd problem starting gnome

Ok i have a slightly wierd problem. I wanted to install gnome 2.1 but i have no interent connection so i downloaded all the gnome related packages & their dependancies and installed them. I dont know exactly everything i installed but among others i installed the following and their dependancies:
gnome-applets
gnome-audio
gnome-backgrounds
gnome-blog
gnome-common
gnome-desktop
gnome-icon-theme
gnome-keyring
gnome-menus
gnome-panel
gnome-session
gnome-terminal
gnome-utils
gnome-vfs
gnome-volume-manager
I removed the exec entries for wmaker etc from the bottom of xinitrc files in /etc/X11/xinit/xinitrc and /etc/skel/xinitrc and put in exec gnome-session. - I wasnt sure which was the default xinirc file.
The problem is that gnome does kindof start but i get some kind of a mutation between what you get from starting xinit and gnome. Basically the gnome desktop and panels start in little windows which is no good.
Is it that theres something i need to install and havent or something i need to uninstall to allow gnome to work properly or what am i doing wrong?
Cheers
Btw is any way to post a screenshot?

There i no .xinitrc in the home directory by default, X defaults to one of the two i mentioned above - i didnt want to complicate things by putting one in my home directory.
Edit: Thanks though - i could have missed it.
Either way i finally go pacman to do pacman -S gnome and that fixed it. Must have been missing some package.
I get a proper gnome enviornment now but the terminal doesnt work and neither does nautilus. Trying to open the file manager crashes it removing icons from the desktop and the context menu.
Is this a common problem? Im thinking i might reinstall the whole thing because ive spent so much time messing around with it, bound to have broken something . . .

K8N Neo2, wierd problems

Hey all, I am new here
I looked through all the post but did not find anything related to my problem.
I have had my rig almost a month without any problems but all of a sudden the computer just rebooted itself right in the middle of a simple (not 3d) game. It just kept rebooting after it reached the Windows logo and I would get error message like "IRQ was not less or equal" and the great Windows has stop your computer because of hardware failer, system will shut down. I tried to do a restore but XP could not find the HD, when I tried to run XP from CD it would not load due to hardware failer and I could not get into safe mode. Sometimes in the BIOs the BIOs would be corrubted, get those greek letters and things, just sometimes.
I stripped the thing down to just barebones, CPU, ram, vid and cleared cmos.
I first determined that the onboard IDE controller was bad, when I moved my HD to the PCI IDE controller the errors changed but XP kept restarting, but it now gave me a NT loader error which took me to the ram.
I pulled the ram and tried 1 stick at a time, turned out that 1 of the 512MB modules went bad, with that the computer started up and seemed to run fine. I connected everything back up and things still ran fine, just could not use the onboard IDE controller as Windows would not pick anything up on it. The next day I work on it some more, put the HD back onto the onboard IDE controller and it worked again.
But then my PS2 mouse port went dead, switched back to my USB and all seems well so far.
I used a VOM and checked the 3.3, 5 and 12 volt rails, all were within specs, no drops even under a stress test, CPU temps are fine.
Anyone else have seen anything like this
I have already received a RMA from Newegg on the MB but before I send it back I want to see if there is a solution to my problem.
My gut feeling tells me P/S but it test good. Been running 2 days now without any problems but I am worried that it may happen again.
My other thought is that maybe a zener diode, cap or voltage regulator on the MB may be going bad.
Any one have an idea about this, should I just send it back and get another MB or is this a growing MSI problem
Thanks for any input.
I have the following:
Windows XP home with SP2, fresh install and all updates
K8N Neo2 nForce3 Ultra, stock settings right now, BIO updated to 1.B0
64 3500+ Venice, stock settings
1 Gig PATRIOT memory, 2*512MB running dual channel settings all auto/ stock
420W Vantec P/S, 420a
ATI 9550
80 Gig WD
20 Gig WD
Sony CD-RW
52x CD-Rom
PCI SiI 0680 Ultra 133 Medley ATA raid controller: Running slave HD and CD-rom on it, no raid setup

JayBee;
I used the VOM whilel running the stress test with everything hooked up, even played intense 3d games with the VOM connected back-probing the pins 1,2 and 11 (orange wires) of the MB power connector for the 3.3 volt rail and then back-probing the molex cable for my 5 and 12 volt rails.
I cleared the cmos by by pulling the P/S cable then turning on the P/S to discharge caps, after this i used the "clear cmos" jumper and then went back in and set everything bak up.
As I have said, even with just a basic setup, CPU, 1 stick of ram and vid I still got the problems, it wasn't until I moved my C:\ HD to the PCI IDE controller and the one bad stick of ram that I could get XP to start up.
I moved the C;\ drive back to the onboard IDE and again XP would not load, the next day I tried it again and all of a sudden the onboard IDE were working again. The very next day while playing my PS2 mouse went dead, plugged my USB mouse in and have been playing ever since. Very wierd stuff, like a bad diode gate or somthing, don't really know.

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3. All components install except InDesign. Is this an installation disk problem or is it not compatible with the OS?

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3 Design Premium. All components install except InDesign. Is this an installation disk problem, or is there a compatibility problem with the OS?

I fear that you are trying to download OLDER Software on a newer Operating Sysytem Meaning that you need to Install the Latest Version of Adobe on the Newer Operating System for it to work Properly. Be sure to always check the minimum System Requirements.

Hp smart web printing does not work on firefox. HP says this is not their problem and to contact Mozilla. Is there a plug in available?

I just bought a new hp printer. the software has a feature called HP web smart printing. The feature works on explorer but not on Firefox. HP says this is not their problem and suggested I contact Mozilla. Is an add on available and if not will one be made available.
I am using v. 3.6.13. and the printer is HP Officejet 4500.

HP smart web printing is an application that only works with IE. In spite of what HP have told you, if they want their application to work with Firefox they will need to make a version for Firefox. It is not down to Mozilla to make a version of the HP software for Firefox.

When I open a second Firefox browser window, the URL address window, instead of showing the URL, says "Go to a Web Site;" also, and more importantly, the "back" button is greyed out. This is a new problem, and the first Firefox window I open works fine.

After I open the first Firefox browser window, any additional window I open does not open my homepage, but opens a blank page with "New Tab" showing on the tab. An orange "Firefox" tab with a drop down arrow shows at the upper left hand corner of the screen. All of the options (File, Edit, etc.) are greyed out, however they will work if you move your cursor over them.
The URL address window says "Go to a Web Site". After I've gone to a website, the back button remains greyed out and I am not able to go back to a previous page. My RoboForm and Netcraft toolbars only show up in an abbreviate form. The add-on bar doesn't show up at all.
Again, this is a recent problem, and only happens after I've opened one browser window (which works fine) and then open additional browser windows (as few as one additional).

I had this same problem. Seems to be caused by the web developer tool bar FF extension (this started happening after a recent update to that extension). After disabling it, my FF is back to normal :)

I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve things under an old Apple ID when the email used for that account no longer exists? I am trying to update a number of apps that was bought under an

I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
Any updated way to work around this? No Apple people can correct it.
Thanks,
Joe

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

I am unable to view google ads running alongside and under videos on YouTube. This is only a problem when I use Firefox. If I use another browser, I can see the ads. I do not have adlock as it does not appear in my plug-ins/add ons. Please help..

I have been using Firefox for about two years. For about a month now I have been unable to view any Google advertisements that run on YouTube pages alongside and under videos. This is important for my business. I would like to stay with Firefox, but this is only a problem when I use Firefox and is not a problem with Internet Explorer or Google Chrome as I checked. I tried uninstalling Firefox and all plugs ins and add ons and then reinstalling it. This did not work. Firefox seems to be blocking the Google codes that enable the ads to run on the pages. I look forward to your help. Thank you.

CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O.

The Back button only allows me to go back one page at a time instead of selecting a previous page from a drop-down list. This is a real problem: anyone have any ideas?

In the previous version of Firefox, I could go back to a previous webpage by clicking on a part of the Back button which brought up a list of recently visited sites, and by clicking one of these, could jump straight back to that page. This facility does not seem to be available in the latest Firefox, and the Back button only goes back one page at a time. This is really inconvenient, as,
it now takes longer to get to an earlier page
there is no visibility of previous pages visited
any actions carried out on webpages are undone when going back through them - this does not happen when jumping back several pages in one go.
This is a real problem as I used to the old system constantly, and cannot continue to use Firefox 4.0 unless there is a way around it.

For me, I have the same question, this is a poorly done upgrade and I want to go back to 3.6

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

This is a wierd problem!

Similar Messages

Maybe you are looking for