This is a3rd generation ipod ,which version of ios can i download?
i have a 3rd generation ipod touch ,which version of ios can i download?
First check that it is a 3rd Gen...
Identify iPod Models
http://support.apple.com/kb/ht1353
If it is you can update to iOS 5... If not then iOS 4 2 1 is as high as it will go...
Updating to iOS 5
http://support.apple.com/kb/HT4972
Similar Messages
-
I have a macbook and was having trouble with safari so I removed it and am trying to re-download but it says snow leopard and lion are too big. which version of safari can i download?
Which operating system are you running? Not sure, click the apple on the left of the menu bar, the click about this mac. It will say version 10.6.x or 10.7.x.
-
Why does everything about garageband gotta be so **** difficult and do the instructions seem kinda "vague" to anybody else.... or is that just me?? Any advice would be greatly appreciated..... ~JH~
You can run GarageBand 6.0.5 on your Mac - the version is described here: http://support.apple.com/kb/DL1507
But you cannot download a full version any longer from the AppSTore, the current App Store version is 10.0.2, and that is incompatible with your system. To get a compatible version, buy an iLife '11 installer from Amazon, or check, if your Mac came with bundled applications on an instller disk.
To get started with GarageBand see the Help page: http://help.apple.com/garageband/index.html#gbnda0cc60ee
Or have a look at Edgar's graphical enhanced manuals:
http://DingDingMusic.com/Manuals/ -
Which versions of Window can perform best with CiscoWorks?
Hi,
Please advice that currently we have 3200 logical devices configured on CiscoWorks and CiscoWorks is running very very slow. CiscoWorks installed on server with Windows Server 2003 32-bit and this version of windows it can only support RAM up to 4GB, which is already installed. In order to increase the RAM we have to upgrade the windows version as well.
Please advise that which versions of Window can perform best with CiscoWorks. E.g. Windows Server 2003 with Service Pack 1 (SP1), Standard Edition 64-bit: or Windows server 2008 etc. Please advise us the full windows release version as we will upgrade windows as per your suggestion.
We are currently using the LMS 3.2, RME 4.3.0, CM 5.2.1Please refer to the Installation Guide for Windows server requirements. Here is the link:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1099303
Given that you want to stay with Windows Server, Server 2008 Standard Edition with service Pack 2 would be your best choice.
NOTE that your should not (and cannot) use Server 2008 R2. That version in only supported with LMS 4.0.1. LMS 3.2 will not work with Server 2008 R2.
With a 64-bit OS, you can increase your RAM - which is usually constraining system performance on systems with 32-bit OS. I recommend just putting in 16 MB. Why skimp on $100 RAM with $20,000 software?
Your other alternative is to divide the server roles across several machines. That is a pretty complex task so I'd do the OS and RAM upgrade first and see how that helps you out.
Re "Linux" LMS 3.2 (and 4.0/4.0.1) is only supported on Windows and Solaris operating systems. Plus if you're not a Uniux admin, the learning curve can be steep for your first dip in the water. -
I upgraded my Ipod touch version to iOS 6.1.3 yesterday & the problem is that as i sync my ipod & the,computer,my computer sync only contacts & after showing determining apps to sync, my computer won't sync any others anymore.
It abruptly stop sync & when i start over the process, it still operates the same.
What should I do & i wish to get my ipod back.Try Here > http://support.apple.com/kb/TS1583
And See this Discussion...
https://discussions.apple.com/thread/4204776?start=0&tstart=0 -
I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...
Nobody here would have a crystal ball and know what Apple plans on doing in the furture.
If you feel this feature is so important, you can let Apple know:
www.apple.com/feedback -
I have 2nd Generation iPod touch and latest iOS release for it is 4.2.1. Most of the Apps on iTunes now require iOS 4.3 at minimum. Isn't it outrageous that Apple is not supporting such iOS update for older iPod? Is there plan to discontinue such support?
I have a 2nd generation iPod Touch too and I currently have 24 Apps that I cannot update. Unlike you however, I hold the App developers responsible for the fact that they (the App developers) are not supporting iOS 4.2.1.
It is the App devloper who decides to modify their App so that it then requires a particular version of the iOS. Since a developer can have a free and a paid version of an App, it begs the question why don't they have the older and newer versions.
I now check the requirements for an App before I click on update. If it still only requires iOS 4.2.1, then I can update. If it requires a higher iOS, the I simply don't update it. One good thing is that by now, most of the older Apps are quite stable and bug free, so the update is usually to give something extra. Since I cannot update the App, I simply forgo the "extras". -
hello, which version of ios 6 beta is the correct download for ipad3 wifi+celluar ... within the uk.
many thanks
stuarti do apologise - i am a developer an have succesffuly installed all beta on my current devices... but i live in the uk, and do not have the verizon or att network, so therefore could not find the correct download for my ipad3...
i have emailed support but no response
stuart -
Hello, I have an ipod touch 2g and I can not download the application or change the version. made for me a solution please. and thank you
The hardware on the 2G does not support an iOS version higher than 4.2.1. If you want apps that require a higher version you will need to get a newer model iPod.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version. -
Can 2nd generation ipod be updated to ios 6
Can 2nd generation ipod be updated to ios 6 or later?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.0.x
iPhone 4S iOS 7.0.x
iPhone 5 iOS 7.0.x
iPhone 5c iOS 7.0.x
iPhone 5s iOS 7.0.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 7.0.x
iPad 1 iOS 5.1.1
iPad 2 iOS 7.0.x
iPad 3 iOS 7.0.x
iPad 4 iOS 7.0.x
iPad Mini iOS 7.0.x
iPad Air iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
i have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?
i had the facebook app but i could never upgrade it and i was ok with using the outdated version but when i reset the ipod so i could gift it to a friend it obviously got rid of the app and now i cant downloaded because it says its not compatable, how can i download the version i had before i reset it?Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews -
Bought the paid version . I can not download the program . Did not send the code .
Bought the paid version . I can not download the program . Did not send the code .
Which version of Photoshop?
-
I would like to purchase an ipod for my husband. Can I download songs from my itunes library to his ipod without disturbing my itunes?
Yes Deborah,
Actually it's as smiple as plugging in the iPod and registering it, this will be done by a step by step dialog box when you first plug it in. After that it will show up in your device list on the left side. Just drag the song from the music library in iTunes to the iPod device that is his. You can drag single songs, complete albums or even complete genres. If it is a iTouch you get him, you can also click the music tab on the iTouch device in iTunes when you plug it in and you can just check off artist names or just certain albums. Also on a iTouch on the summary screen you can click the sync with iTouch over Wi-Fi check box and you will no longer have to plug it to the computer to sync. Also, since they are two different devices the music on one will not affect the music on another. This goes for any iOS device, iPods, iTouches, iPhones, and iPads.
Hope that helps. -
I downloaded a song that stops at 1:04 and jumps to the next song, as if it's over. This song was in the middle of several songs, but this is the only one that is incomplete. Can I download this song again for free, or do I have to purchase again?
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us -
I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
File share with USB HD & AEBS?
Is there a way for me to convince my Airport Extreme Base Station to let all the users on the Airport network read and write to a USB hard drive connected to the Base Station's USB port? If not, is the only comparable solution one of those LaCie ethe
-
Hi, A my user (admintest) have this roles: [ACCESS_LEVEL_EDITOR], [ADD_CUSTOM_SECTION], [ADD_EXT_ATT], [ARCHIVED_DWB_SPEC_CREATOR], [ARCHIVED_DWB_TO_GSM_SPEC_EXPORTER], [AVAILABLE_UOM_ADMIN], [CACHE_ADMIN], [CACHE_SERVER_VIEWER], [CAN_RERESOLVE_WORKF
-
5200, No Sound On Tv Recordings!
When i set up a schedule of around 30 mins, I get NO SOUND when i playback the recording. This is so annoying because this is what I bought the card for. I installed the latest drives from nvidia. I am running a 3GHz P4, with 512k ddr ram on an ABIT
-
In my final cut pro 7 settings i have made 5 personal window layouts. I know where they are located: Users/your name/Library/Preferences/Final Cut Pro User Data/Window Layouts. Now i want to make another one. When i try to save it, the window layo
-
IDM 6 : Authorization Type in Rules
Hi, With IDM 6, I am getting the following error while accessing a anonymous user task which uses custom rules as well as out of the box rules such as Regional Constants. ERROR: View access denied to Subject Reset on Configuration: Custom Alpha Numer