This is how to solve error-8008 problems

Ok, this is how I fixed it. No one at apple told me to do this but it worked.
First I found my Itunes folder on my computer. For most people this will be on their main drive (C:/Itunes) Within your itunes folder there is a folder named DOWNLOADS.(C:Itunes/Downloads) In this folder Itunes stores temporary files of your downloads in progress. Double click on this folder and you should see the names of the files/programs that keep coming up error -8008. They will be folders with a .tmp extension.
Just delete them!!! I know this is scary but it works. Once you delete them go back to your itunes click on store and check for purchases and the downloads will resume.
Very simple version (assuming used the default Itunes install location)
Locate and double click on My Computer
Locate and double click on the folder itunes
Once inside the itunes folder locate and double click on the folder labelled Downloads.
In this folder you should see folders that have the same names as the files that have had -8008 error message, along with an extension of .tmp.
Delete those files!!!
Go back to itunes and go to store then check for purchases and everything should go perfectly fine.
It did for me.
  Windows XP  

it does not work every time and or on every computer, i have the same issue as above but this does not work all it does is start the file over and then the file just errors out again.

Similar Messages

  • How to solve error -1450?

    I have been re-installed iTunes, and it keeps pop-up with the error -1450 ( cannot save music library ), and it reloads all the playlist each time I switch on the computer and open iTunes.
    I have been re-install iTunes after the error appear, and it seems although I have re-install iTunes, the problem doesn't solve and keeps repeat.
    For any kindness, please tell how I can fix this error, as I cannot find any articles on support page about this.
    Thanks

    Does anyone know how to solve error 1450 or even what
    caused it!? This problem is killing me.
    I found this by doing a search on Google for "Error 1450": http://support.microsoft.com/kb/236964/EN-US/

  • TS1717 Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

    Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

    Hey HaydenJulie,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article provides information on permissions issues with iTunes. The troubleshooting steps included may resolve your issue:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks,
    Matt M.

  • TS3694 How to solve error 3194 ?

    How to solve error 3194 in iTunes, when trying to upgrade iPod touch to ios 5 ? Thank you.

    The common errors and their resolution are contained here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • "The disk you inserted was not readable by this computer". how to solve this problem?

    "The disk you inserted was not readable by this computer." this message  apear on my imac any idea how to solve this problem?

    It means the disc is not in a format your computer can read or it is not formatted at all. You can remove the disc or you can attempt to format the disc. If the disc has data on it, then I would not format it.

  • How to solve error code -1074397179 in Imaq Attribute VI

    I keep getting error message (-1074397179) when I run the imaq attribute VI. What should I do to solve this problem? What are the parameters that i can change to solve this. The error message gave this as img_err_par1. But I have no idea how to solve this problem.
    Attachments:
    IMAQ_Attribute.vi ‏74 KB

    I compared your attribute VI to my own (which is IMAQ 2.6 and working great) and the only differences are in the Attributes input and the Type/Attr/ID input. I have attached my version of the VI in LabVIEW 6.1 below. Try using this and see if it gives you the same errors.
    Hope this helps-
    Julie S.
    Attachments:
    IMAQ_Attribute.vi ‏77 KB

  • How to solve "error occurred in the data manipulation engine"? 64bit Windows 7

    Hi all
    I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
    Steps as follows:
    Launch PA
    Choose and launch Expert Analytics
    Choose Try with Samples
    Open the Dairy Wholesaler file
    Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
    I also get this same error when I try to create my own New Dataset.
    I’m on 64bit Windows 7 Pro
    Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
    1. Uninstall and re-install. Doesn't help
    2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
    Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
    Regards
    Ria

    In case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
    1.  You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
    C:\Users\Public\sapvi
    C:\Users\<user>\AppData\Local\SAP\Lumira
    C:\Users\<user>\AppData\Local\Temp\sapvi
    In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
    2.  Next, to launch the application, explicitly click "Run as Administrator" on the install file

  • How to solve a boot problem

    I was working on my Mac and it was very slow, so i turned it off (it was like quarter and hour while shutdown). After, i tried to boot it again, but didn't boot, so i entered Verbose mode. Error was "disk0s2: media is not present". I entered sigle user mode and i did "fsck -fy". It did the check and it was "The volume Macintosh HD appears to be OK. FILE SYSTEM WAS MODIFIED. I did fsck -fy again (i read on a forum that is necessary to do this till it doesn't appear FILE SYSTEM WAS MODIFIED) and it didn't appeared, only appered again "The volume Macintosh HD appears to be OK", so i logged out, but the disk0s2: media is not present was on screen another time. I booted from Mac OS X installation DVD, and i opened Disk Utility. It appeared the wait cursor and freezed. I held the Power button for shutdown and booted again from same DVD. I selected the installation program and when it checked the HDs for install it appeared Macintosh HD with 159'7 GB and 31'97 GB free, but when HD check finished, it disappeared. After doing that like 5 times, Macintosh HD didn't appear anymore when checking. From the single user mode i can enter to HD directories, like /Applications/Parallels or /Applications/ToySight etc. I need help for how to boot again my Mac or how to reinstall Mac OS without losing anything, or how to do a backup. Thanks.

    CAH4E3 wrote:
    Got my new customized iMac 27' yeasterday. After installing some soft, I decided to install Windows 7 as second OS on Boot Camp. After clicking the Boot Camp Assistant icon, programm opens, and immediately it shows error "Boot Camp Assistaint does not support Windows installation on this iMac 3TB" or something like that (I have a russian version of dashboard/OS). Only option available at that moment - button "OK", which exits Boot Camp A|ssistant.
    So... Any suggestions on how to solve the problem? I really need Windows as second OS, and don't want to install it like a virtual/emulator machine.
    My customized iMac "loadout" is Core i7 3.4, 16Gb DDR, Nvidia GeForce 680MX 2Gb, 3TB Hard Drive.
    P.S. I thought this may be solved by separating Hard Drive into partitions (main, which is for Mac OS, and little tome for Windows, formated into MS DOS FAT system), still - this has not helped me.
    There is a thread covering this subject here.  I would advise you to read the whole thread before trying the 'solution'.

  • How to solve Error -1074396080 occurred at IMAQ array to color Image

    Hello,
    I am getting above mentioned error.
    Here I have attached my screen shot of the error.
    Could any one Please guide me how to solve this error.
    I am using Kinesthesia kinect driver which generate U24 Bit RGB Image and I want to convert it in IMAQ Image type, But I am getting mentioned error.
    But when I am not using the vision acquisition and vision assistant then every thing is fine means there is no any error which I have attached in attachment 2.
    Please guide me how to solve this problem.
    Thank you very much.
    Solved!
    Go to Solution.
    Attachments:
    invalid image type.png ‏251 KB
    imaq2.png ‏56 KB

    Thank you very much for quick reply.
    I follow your instruction but it give me still same error.
    here in attachment I have attache screen shot as well Vi so you have a look.
    thank you very much once again for help and time.
    Attachments:
    Unbenannt.png ‏174 KB
    kinect templet.vi ‏137 KB

  • How to solve Error in http connection. Error -1

    urlMidlet2===http://localhost:8080/testProj?userId=20&selMPBL=23&svMPBL=IPOD+Touch+Screen+e!1!Tue+Jan+06+00:00:00+UTC+2009!Tue+Jan+06+00:00:00+UTC+2009!Sat+Jan+31+00:00:00+UTC+2009!Mp3+Player!IPOD!Rejected!12
    [j2mepolish] Generic/DefaultColorPhone: !1!2!1222!13333
    [j2mepolish] Generic/DefaultColorPhone: Protocol for this connection is http
    [j2mepolish] Generic/DefaultColorPhone: This object is connected to localhost host
    [j2mepolish] Generic/DefaultColorPhone: HTTP Port in use is 8080
    [j2mepolish] Generic/DefaultColorPhone: respCode=====-1
    [j2mepolish] Generic/DefaultColorPhone: Error in opening HTTP Connection. Error#-1
    Why is this error coming? How to solve it?
    Thanks in advance.
    Edited by: J2me_Beginner on Jun 7, 2009 9:38 PM

    I am making a form using an interface. When Activate the Form, I got this error:
    Invalid HTTP connection: ADS
    Message no. FPRUN000
    But I do not know how to solve or config ADS. Any one know how to slove this error ?
    Thanks a lot.

  • How to solve error when run Depreciation (T-Code:AFAB)

    Dear All Experts,
    Hi,
    I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB).  with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
    Documents manually posted within dep.doc.number range
         Message no. AA728
    Diagnosis
         In the number range interval for the document type for posting
         depreciation, a document  has been posted which was not created within
         the framework of depreciation posting. The last document posted by
         depreciation posting was assigned the number .
    Procedure
         Contact your Systems Specialist. When changing the number range interval
         for the document type in depreciation posting, you have to specify a new
         interval in which no documents exist. Using organizational measures, you
         can guarantee that there are no documents apart from those created by
         depreciation posting in this number range.
    Would you help me how to solve this error?
    Thank you in advance
    Best Regards
    Utarat.P

    Hi Utarat,
    first question is: have you really manually posted a Documents within dep.doc.number range 
    If you post with RABUCH00, note 193984 could be relevant for you. 
    Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
    Example:
    TABA
    MANDT BUKRS  AFBLGJ AFBLPE AFBANZ BLNRF      BLNRT      XBUKZ  
    100   XXXX   2010   004    01     4200000013 4200000016 X      
    100   XXXX   2010   005    01     4200000017 4200000020 X      
    100   XXXX   2010   006    01     4200000021 4200000024        
    On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already   
    exits.                                                                               
    BUKRS  BELNR      GJAHR BLART BUDAT      CPUDT      CPUTM    TCODE
    XXXX   4200000024 2010  YY    30.06.2010 06.07.2010 19:36:30 ABF1 
    XXXX   4200000037 2010  YY    30.06.2010 06.07.2010 19:37:47 ABF1 
    Regards Bernhard

  • How to solve parameter passing problem?

    I have a report that can be place on any Portal page and it requires several parameters.
    The report is based on a query:
    select bldgname
    from building
    where (bldcntry = :cntry or :cntry is null) and
    (bldstate = :state or :state is null) and
    (bldcity = :city or :city is null)
    The LOVs for the bind variables need to be linked, i.e. State LOV is function of Cntry LOV and city LOV is function of both cntry LOV and state LOV.
    I can't use the Customization screen because it doesn't allow linked LOVs.
    I can't use a master detail form because I would have to create a table consisting of the 3 bind variables, M/D forms don't work with views. Since this is just one of 60 reports I have to do, it would mean adding 60 of these pseudo tables.
    I was thinking of placing a form, which can have linked LOVs, on the same page as the report, and then calling the page and passing the values of the LOV to three page parameters. Unfortunately, I need to dynamically determine the url of the page the report and form are on and p_page_url doesn't seem to be accessible from a form, although it is from a report, I have a TAR on this issue.
    So I wonder if anyone has an idea how to solve this problem?
    Larry

    Hi,
    Try calling the report from the success procedure of the form
    Here is an example which calls the report from the success procedure of the form.
    declare
    flightno number;
    ticketno varchar2(30);
    blk varchar2(10) := 'DEFAULT';
    l_url varchar2(2000);
    begin
    flightno := p_session.get_value_as_varchar2(
    p_block_name => blk,
    p_attribute_name => 'A_FLIGHT_NO');
    ticketno := p_session.get_value_as_varchar2(
    p_block_name => blk,
    p_attribute_name => 'A_TICKET_NO');
    l_url := 'http://domain/pls/reportname.show?p_arg_names=flightno&p_arg_values='||flightno||'&p_arg_names=ticketno&p_arg_values='||ticketno;
    call(l_url);
    end;
    Thanks,
    Sharmila

  • When make GRN i receive this message how to solve this?

    When making GRN I receive this error how to solve this?
    The UOM conversion does not exist
    Procedure
    The UOM conversion does not exist in the material master for the material and UOM entered
    Not maintained alternative unit of measure
    I  have checked in material master, inforecord, and purchase order. All are correct
    Execues for unrelated answer

    If ur purchasing uom is different from base unit of material master data,
    maintain alternative unit of measurement,Click additional data maintain alternative uom in it to avoid this error.

  • HT201442 how to solve error 3004?

    Hi All,
              I haveing problem during restoring. Unable to restore due to error 3004. Anybody knows how to solve it. Thk.

    Hello, kyawmyintshein85. 
    Thank you for visiting Apple Support Communities. 
    Here are the steps that I would recommend going through when experiencing restore error 3004. 
    Resolve communication issues
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Also, make sure to process and updates for iTunes and your computer.
    Cheers,
    Jason H. 

  • How to solve error  : ORA-6512 at APPS.EAM_WORKORDER_PKG

    In new EAM installation process, the next error occurs during the creations of new operations to WO and attachments of new activities, which have several operations.
    ERROR:ORA-06502: PL/SQL :numeric or value error: character string buffer too small
    ORA-06512: at ''APPS.EAM_WORKORDER_PKG'', line 1529
    ORA-06512: at ''APPS.EAM_WORKORDER_PKG'', line 1966
    The implementation is in 12.0.4 version.
    Some one know how to solve this issue en EAM EBS.
    Thanks.

    Thanks for your help,
    I have reviewed all information sent for you. The issue finally was solve with the action plan descibed in the next :
    WICDOL - Autocreate Final Assembly Orders Completing With Warning - "ORA-01400: cannot insert NULL into ("WIP"."WIP_OPERATIONS"."WSM_BONUS_QUANTITY") " [ID 734605.1]
    This particular issue afects the operations creation, assigment of activities with predefined operations and state change.

Maybe you are looking for