This is more of a suggestion than a problem that I need help with....
Why doesn't iTumes for Windows use a year long re-download policy such as RealArcade when you purchase a game? I've lost a ton of music during a driver upgrade that went bad. I had to trash my hdd & start over... and I was under the impression that I had created a backup of my music using Nero Burning Suite. But after attempting the restore, I found out that the Nero Suite doesn't do anything for the 8.3 file extension overlaod issue. Some programs will not recognize embedded folder names and files passing 256 characters for the path/ name of the file. I would like to be notified when something like this is available for the general public. I have spent a bit of cash with the iTunes store, and I would like to be able to get (at least once more ) my money's worth. I understand that this is not Apple's problem, but it would go a long way to providing superb customer service.
Thanks for listening.
I hate to sound preachy, but Apple warns customers to back up.
Why do I need to back up my music library?
In rare cases, you can ask for a re-download. Try customer service:
iTunes Customer Service
Similar Messages
-
Basically I got Gmail on my Pre set to push emails as they arrive, I also have Exchange setup the same way.
Now lets say I look at my email screen on the Pre and it shows me I got 3 new gmails and 3 new exchange emails. But rather than jumping on the Pre to check them, I get on my desktop computer instead. I go open up gmail, read all the emails, and gmail on my computer now shows I have 0 new messages. I do the same for Exchange.
Now I go back on my Pre to see what it says. It says I have no new Exchange emails, but still shows 3 new gmails. I even open up gmail on the Pre and the 'new' email number in the right hand corner does its little animation like its updating itself, but it still says 3 and I have 3 emails bolded. And the Pre seems to continue to tell me I have 3 new emails until I manually hit the refresh/sync button in the lower right hand corner.
Bascially I would like the gmail to act the same as exchange and update read emails instantaneosuly. Also it would be nice if Palm could work in a feature where if I did read the emails on a device other than the Pre, the little icon notifications would go away too.
Post relates to: Pre p100eww (Sprint)Okey I think I have found a solution for this problem. I have Pre plus (AT&T) and faced the same issue as you. Mail was not getting updated as read when I already read it using outlook on my computer.
Upon looking at the SMTP setting on Pre I see that by default its security is SSL and port is 465. I just changed the port to 587 and now it works as it should be
Try this trick and let us know... -
I am using an AE template project of a photo album where I can just insert my own photos. There are about 6 "page" templates to choose from, each a little different. I used each 1 time. Now, I am attempting to use each page again. The new pics went in fine, but then I realized it also changed the pics in the 1st application of that page template. I tried renaming the 2nd use of the template, but it didn't work.
Are you duplicating footage or pre-comps. Highlighted the clip is meaningless. Assets in the composition panel are either footage or compositions. Footage can be stills, audio, or video. Sorry, but you're attempting to do something without any knowledge of how footage or comps work. If it's footage, then your workflow is flawed. You need to duplicate the layer in the Timeline and then replace the footage in the duplicate by holding down the Alt/Option key and dragging the new footage to the selected footage in the timeline. If it is a pre-comp then you have to add your new footage to the pre-comp, not the footage layer.
Here's what you should do, Show us the main composition timeline and a mini flow chart with the properties of your problem layers revealed. Just select them in the timeline and press the U key twice. Since there are millions of ways to create a slideshow we can't possibly know what to tell you to do without seeing the composition and the timeline and the flow chart. There are hundreds of slide show templates on the web, most from well meaning but inexperienced folks trying to improve their standing in the AE community. Most don't have sufficient documentation, and most that I've looked at are a real mess to customize. Without knowing exactly where you are starting from we have no idea what to suggest except that your workflow is wrong and you need to make sure that every layer in the project is unique.
If it were me and I had access to Lightroom or iPhoto I would throw the stills in one of those apps and generate a slide show, That will take about 10 minutes. Render that and then when that's done, either import it into Premiere Pro to add titles. Then, when that's done and I've covered myself for offering to produce the video, I would move into After Effects and try and figure out how to do more of a custom job. One more hint, if the Photos are all much larger than your HD comp then you should batch resize them. All still images in an After Effects composition should be at or near 100% scale at some point in the project, or if 3D layers not closer to the camera than the Zoom value of the camera. At no time should still images be sitting still in a composition with a scale value of more than about 130% or closer to the camera than 60% of the zoom value. -
JMF Datasource problem..i need help with this one error
This the error i get when i try to run my program
Error: Unable to realize com.sun.media.amovie.AMController@18b81e3Basically i have a mediapanel class that initialize and play the media as datasource
import java.awt.BorderLayout;
import java.awt.Component;
import java.io.*;
import java.net.URL;
import javax.media.*;
import javax.swing.JPanel;
import java.nio.ByteBuffer;
public class MediaPanel extends JPanel
InputStream stream;
String name = "";
ByteBuffer inputBuffer;
byte[] store = null;
public MediaPanel( InputStream in )
try{
this.stream = in;
//store stream as ByteBuffer
store = new byte[stream.available()];
stream.read(store);
inputBuffer.allocate(store.length);
inputBuffer.wrap(store);
//get contentType
DrmDecryption drm = new DrmDecryption();
name = drm.naming;
setLayout( new BorderLayout() ); // use a BorderLayout
ByteBufferDataSource ds = new ByteBufferDataSource(inputBuffer,name);
// Use lightweight components for Swing compatibility
Manager.setHint( Manager.LIGHTWEIGHT_RENDERER, true );
// create a player to play the media specified in the URL
Player mediaPlayer = Manager.createRealizedPlayer(ds);
// get the components for the video and the playback controls
Component video = mediaPlayer.getVisualComponent();
Component controls = mediaPlayer.getControlPanelComponent();
if ( video != null )
add( video, BorderLayout.CENTER ); // add video component
if ( controls != null )
add( controls, BorderLayout.SOUTH ); // add controls
mediaPlayer.start(); // start playing the media clip
}catch(Exception e){}
} // end MediaPanel constructor
} // end class MediaPanelThe ByteBufferDataSource class is use to create the datasource for the player
import javax.media.protocol.ContentDescriptor;
import javax.media.protocol.PullDataSource;
import java.nio.ByteBuffer;
import java.io.IOException;
import javax.media.MediaLocator;
import javax.media.Duration;
import javax.media.Time;
public class ByteBufferDataSource extends PullDataSource {
protected ContentDescriptor contentType;
protected SeekableStream[] sources;
protected boolean connected;
protected ByteBuffer anInput;
protected ByteBufferDataSource(){
* Construct a ByteBufferDataSource from a ByteBuffer.
* @param source The ByteBuffer that is used to create the
* the DataSource.
public ByteBufferDataSource(ByteBuffer input, String contentType) throws IOException {
anInput = input;
this.contentType = new ContentDescriptor(
ContentDescriptor.mimeTypeToPackageName(contentTyp e));
* Open a connection to the source described by
* the ByteBuffer/CODE>.
* The connect method initiates communication with the source.
* @exception IOException Thrown if there are IO problems
* when connect is called.
public void connect() {
sources = new SeekableStream [1];
sources[0] = new SeekableStream(anInput);
* Close the connection to the source described by the locator.
* The disconnect method frees resources used to maintain a
* connection to the source.
* If no resources are in use, disconnect is ignored.
* If stop hasn't already been called,
* calling disconnect implies a stop.
public void disconnect() {
* Get a string that describes the content-type of the media
* that the source is providing.
* It is an error to call getContentType if the source is
* not connected.
* @return The name that describes the media content.
public String getContentType() {
return contentType.getContentType();
public Object getControl(String str) {
return null;
public Object[] getControls() {
return new Object[0];
public javax.media.Time getDuration() {
return Duration.DURATION_UNKNOWN;
* Get the collection of streams that this source
* manages. The collection of streams is entirely
* content dependent. The MIME type of this
* DataSource provides the only indication of
* what streams can be available on this connection.
* @return The collection of streams for this source.
public javax.media.protocol.PullSourceStream[] getStreams() {
return sources;
* Initiate data-transfer. The start method must be
* called before data is available.
*(You must call connect before calling start.)
* @exception IOException Thrown if there are IO problems with the source
* when start is called.
public void start() throws IOException {
* Stop the data-transfer.
* If the source has not been connected and started,
* stop does nothing.
public void stop() throws IOException {
}i have a SeekableStream to manipulate the control of the streaming position.
import java.lang.reflect.Method;
import java.lang.reflect.Constructor;
import java.io.IOException;
import java.nio.ByteBuffer;
import java.nio.BufferUnderflowException;
import javax.media.protocol.PullSourceStream;
import javax.media.protocol.Seekable;
import javax.media.protocol.ContentDescriptor;
public class SeekableStream implements PullSourceStream, Seekable {
protected ByteBuffer inputBuffer;
* a flag to indicate EOF reached
/** Creates a new instance of SeekableStream */
public SeekableStream(ByteBuffer byteBuffer) {
inputBuffer = byteBuffer;
this.seek((long)(0)); // set the ByteBuffer to to beginning
* Find out if the end of the stream has been reached.
* @return Returns true if there is no more data.
public boolean endOfStream() {
return (! inputBuffer.hasRemaining());
* Get the current content type for this stream.
* @return The current ContentDescriptor for this stream.
public ContentDescriptor getContentDescriptor() {
return null;
* Get the size, in bytes, of the content on this stream.
* @return The content length in bytes.
public long getContentLength() {
return inputBuffer.capacity();
* Obtain the object that implements the specified
* Class or Interface
* The full class or interface name must be used.
* The control is not supported.
* null is returned.
* @return null.
public Object getControl(String controlType) {
return null;
* Obtain the collection of objects that
* control the object that implements this interface.
* No controls are supported.
* A zero length array is returned.
* @return A zero length array
public Object[] getControls() {
Object[] objects = new Object[0];
return objects;
* Find out if this media object can position anywhere in the
* stream. If the stream is not random access, it can only be repositioned
* to the beginning.
* @return Returns true if the stream is random access, false if the stream can only
* be reset to the beginning.
public boolean isRandomAccess() {
return true;
* Block and read data from the stream.
* Reads up to length bytes from the input stream into
* an array of bytes.
* If the first argument is null, up to
* length bytes are read and discarded.
* Returns -1 when the end
* of the media is reached.
* This method only returns 0 if it was called with
* a length of 0.
* @param buffer The buffer to read bytes into.
* @param offset The offset into the buffer at which to begin writing data.
* @param length The number of bytes to read.
* @return The number of bytes read, -1 indicating
* the end of stream, or 0 indicating read
* was called with length 0.
* @throws IOException Thrown if an error occurs while reading.
public int read(byte[] buffer, int offset, int length) throws IOException {
// return n (number of bytes read), -1 (eof), 0 (asked for zero bytes)
if ( length == 0 )
return 0;
try {
inputBuffer.get(buffer,offset,length);
return length;
catch ( BufferUnderflowException E ) {
return -1;
public void close() {
* Seek to the specified point in the stream.
* @param where The position to seek to.
* @return The new stream position.
public long seek(long where) {
try {
inputBuffer.position((int)(where));
return where;
catch (IllegalArgumentException E) {
return this.tell(); // staying at the current position
* Obtain the current point in the stream.
public long tell() {
return inputBuffer.position();
* Find out if data is available now.
* Returns true if a call to read would block
* for data.
* @return Returns true if read would block; otherwise
* returns false.
public boolean willReadBlock() {
return (inputBuffer.remaining() == 0);
}can u send me ur DrmDecryption.java file so that i can help
-
This is more of a complaint than a question. I hate the calendar in the new iOS 7. Is it possible to revert to the old calendar system?
We'll I can't comment on the South Park stuff but we are in agreement on the calendar. As mentioned by leonieDF and also by a friend I found a great app called Week Agenda Ultimate and it love it. It takes info from the iOS 7 calendar I hate and puts it in this app. It's perfect. For .99 cents you can't best it. Good luck!
-
FormsCentral retiring in July???!!! Are you freaking kidding me? My clients use this feature all the time. What do you suggest I do now? What service do I go with that is comparable to it? I need help with this asap!
I would suggest checking out http://www.logiforms.com. They have really good PDF support for both hosted PDF's and generating PDFs. You can:
populate PDF forms from a web form submission
Merge multiple PDF's together using conditional logic
Include uploaded images in the generated PDF
Get Electronic signatures on PDF's
Use conditional logic when creating PDF's
Convert HTML to PDF. You design in HTML and CSS and use form field wildcards and generate the PDF
More of the PDF features are explained here:
PDF Form Creator | PDF Form Maker | V3.Logiforms.com
They are also offering a 25% discount to anyone coming from Forms Central... -
I need help with my serial number. I downloaded soundbooth cs3 to restore my downloaded purchase, but my serial number is not being accepted. I have 16 more days to resolve this. I don't need tech support, I just need the software I purchased to work for me. That's not to much to ask, is it? Can anyone from adobe help me please?
ChrisError "The serial number is not valid for this product" | Creative Suite
-
Hi, I need help with my iphone four bought in England but I live in Italy, I upgraded IOS six and now I can not read more than the Italian card, how can I contact a service center via email?
Only the carrier it is locked to can authorize unlocking it. Sounds like the phone was hacked to unlock it originally. Find out what carrier it is locked to, and look up their contact information using google or the search engine of your choice.
-
I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?
and in system report >> hardware >> Graphics/Display >> it shows both grafics card listed.Some Mac's when the RAM is increased the Intel HD 3000 integrated graphics will bump itself up to the higher video RAM it takes, this seems to be what occured.
It also means the dedicated graphics card will be used less, but only so slightly less.
You obviously still should have both, you can test this by turning off Graphics Switching in Energy Saver, that will use the decicated AMD card all the time.
You can also run Cinebench and compare the scores here
Mac video card performance -
Please need help with this query
Hi !
Please need help with this query:
Needs to show (in cases of more than 1 loan offer) the latest create_date one time.
Meaning, In cases the USER_ID, LOAN_ID, CREATE_DATE are the same need to show only the latest, Thanks!!!
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
order by a.create_datePerhaps something like this...
select id, create_date, loanid, rate, pays, gracetime, emailtosend, first_name, last_name, user_id
from (
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id,
max(create_date) over (partition by a.user_id, a.loadid) as max_create_date
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
where create_date = max_create_date
order by create_date -
I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.
Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.
That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
Additionally I have no idea what you are saying here
I have found the color palettes but can't seem to incorporate them into my backgrounds palette.
And it always helps for you to dientify the version of iPhoto that you are using
LN -
Please I really need help with this video problem.
Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
preloaderBar.visible = true;
preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
var perc:Number = e.bytesLoaded / e.bytesTotal;
preloaderBar.percent.text = Math.ceil(perc*100).toString();
preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
preloaderBar.percent.text = '';
preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
if (filme != "sets.swf")
filme = "sets.swf";
carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
if (filme != "home.swf")
filme = "home.swf";
carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
trace(stat.info.code);
meta.onMetaData = function(meta:Object)
trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
ns.resume();
t.removeEventListener(TimerEvent.TIMER,timeHandler);
t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank youMy first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/ -
Need help with this book problem...Pig game...can ANYONE help!??
I need help with the following book problem...could someone write this code for me?? Thanks!!
First design and implement a class called PairOfDice, composed of two six-sided Die objects. Using the PairOfDice class, design and implement a class to play a game called Pig. In this game, the user competes against the computer. On each turn, the current player rolls a pair of dice and accumulates points. The goal is to reach 100 points before your opponent does. If, on any turn, the player rolls a 1, all points accumulated for that round are forfeited and control of the dice moves to the other player. If the player rolls two 1s in one turn, the player loses all points accumulated thus far in the game and loses control of the dice. The player may voluntarily turn over the dice after each roll. Therefore the player must decide to either roll again (be a pig) and risk losing points, or relinquish control of the dice, possibly allowing the other player to win. Implement the computer player such that it always relinquishes the dice after accumulating 20 or more points in any given round.
I realize this is a long code, so it would be greatly appreciated to anyone who writes this one for me, or can at least give me any parts of it. I honestly have no clue how to do this because our professor is a dumbass and just expects us to know how to do this...he doesn't teach us this stuff...don't ask. Anyways, thanks for taking the time to read this and I hope someone helps out!! Thank you in advance to anyone who does!!!Nasty comments? It's not a matter of not liking you, it's a matter of responding to the
"I'ts everyone else's fault but mine" attitude of your post.
If you are genuine, the program is very easy to write, so, your Professor is correct when he said you should
be able to do it. I'm still very much in the beginner category at java, and it took me only 20 mins to write
(+5 mins to design it on paper). 2 classes in one file < 100 lines. Most of the regulars here would do it in half the time / half the lines.
All of the clues are in the description, break them down into their various if / else conditions. Write it down on paper.
Have a go. Try to achieve something. Post what you've tried, no-one will laugh at you, and you will be
pleasanty surprised at the level of help you will get when you've "obviously" made some effort.
Again, have a go. If you don't like problem-solving, then you don't like programming. So, you gotta ask
yourself - "what am I doin' here?" -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444)
Maybe you are looking for
-
Hi, I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while." I rebooted and it didn't fix the problem. I just g
-
At a loss on where to go on this code
I am trying to write program that computes fahrenheit into celcius with input from a dialog box. Here is what I have so far. I have tried other things but nothing work and I am at my wits end. Please help. // ComputeCelsius.java: Convert Fahrenheit i
-
Can't print to pdf with Acrobat 7.1.0 in Vista
I am unable to print to pdf with Acrobat 7.1.0 in Windows Vista. I used to be able to, now all of a sudden that functionality is gone. I haven't knowingly done any upgrades since the last time I successfully printed to pdf, but I do have autoupdate
-
I have both iWork 09 and MS/Office on my MacBook Pro. I am a technical author and make extensive use of spreadsheets, manuscript word processing documents (i.e. books and articles), as well as presentations that must be powerpoint compatible. I am e
-
Java.util.Map type return in webservice method
Wonder, how we can return a java.util.Map type from a webservice deployed on a weblogic 7.x environment.. any input is appreciated. -Girish