This is my error already i had given code

"EXCEPTIONS parameter", "EXPORTING parameter", "RECEIVING parameter",
"IMPORTING parameter" or "CHANGING parameter" expected, not "* HERE YOU
WIL HAVE THE TABLE WITH".

Please continue with the oringal thread and do not open multiple threads for the same question. Thank you.
Regards,
Rich HEilman

Similar Messages

My 4th gen iPod touch will not power on, will not charge anywhere, and is not recognized as plugged in by iTunes. This is irritating, as a friend had given it to me in perfect working condition because she got a new 5th gen iPod Touch.

I just got this 4th-gen Touch from a friend because she got a new 5th-gen. when she gave it to me, the 4th-gen was in perfect working order, and I haven't used it since she gave it to me. I had put it in sleep mode and put it on my dresser, wher it has sat without being messed with for two weeks. Now, all of a sudden, it won't power on, it won't charge no matter WHERE i plug it in to charge, and not even a hard reboot has worked. My computer will not even recognize that it is even plugged in. There is no red low battery symbol displayed, nothing to make it seem as if it is charging, and, if it is charging, no response is evoked from it when I tap it, or push any buttons. The warranty on the thing has expired, and I really need to find out what is wrong with it and get it fixed. Can ANYBODY HELP ME????????? if somebody can point me in the right direction, or even help me get it physically fixed, i am willing to give MAJOR points, and it would be greatly appreciated.

Didn't you already post something similar:
Yesterday, I went and bought a refurbished 3rd-generation iPod touch, with a warranty for needed repairs in the future. When I went home after buying it, I plugged it into my computer to start charging. I plugged it in, and the battery in the iPod exploded, and now it won't power on period, even when it is plugged in or docked. I bought a warranty to go with the iPod because I figured that I was probably going to drop it, and then need it repaired. But Apple cannot even find the purchase record on file from where I bought the AppleCare warranty on it, so now I am stuck with what is now basically a paperweight. What should I do?
iPod touch, iOS 4
And would this be the same iPod with the fried battery?

While Installing adobe reader and acrobat im getting error 1406 this error. I had already tried every possible step including special permission in registry file. Please help..

While Installing adobe reader and acrobat im getting error 1406 this error. I had already tried every possible step including special permission in registry file. Please help..

What is your operating system? Is there anything else beside the number 1406?

Hello, okay? On September 13 I bought an iPad and in October bought a game on the app store problem is that when informed the card number dropped normally, but then went on to ask for a new form of payment because one had given any errors, and so not lowe

Hello, how are you? On September 13 I bought an iPad and in October bought a game on the app store problem is that when informed the card number dropped normally, but then went on to ask for a new form of payment because one had given any errors, and so not lowered any other game and not upgraded the already downloaded. I do not know what exactly I have to do, because if informed a new payment method continues with the same problem, checked the card bill and really had given an error, because there was no billed the game. I ask you to verify what happened and explain to me what I need to do, because my single card is Visa's and do not intend to return others to use the services of the App Store.
Thank you for understanding.

I think you need the app store support. http://www.apple.com/support/mac/app-store/contact/ Go there and use one of the methods to contact them about your issue and they should be able to help you out.
This forum isn't checked by Apple employees but is for users to help each other out.
Phil

"File ... already exists, but it is inconsistent with this one." error

I've previously used ALPC to profile a Zuiko 12-60 on a E520 and I had no trouble at all. I had 33 different sets of 9 pictures each, and they all merged nicely into one consistent profile. The profile worked perfectly and corrected lens distortion better than any other software I've used. Now I'm trying to profile my Nikkor 10-24 on a Nikon D7000, but as soon as I try to append the 2nd set to the 1st one (same focal length and focus distance, different aperture), I get this message: "File <filename> already exists, but it is inconsistent with this one. Please select a different location or use a different file name.".
My brother has been having this same issue and he's also using a Nikon D7000, but with a Sigma 17-70 2.8-4.0. Any ideas why this is happening? Some sort of D7000 raw conversion issue, maybe? I used ACR to convert NEF to DNG. The first profile is created and works well, though apparently not very accurate.
I tested the one profile that is saved, at 10mm and f/3.5, and it's not very good. Distortion is clearly over-corrected. The one difference between the profile I did for the Olympus and this one is that I refocused after every shot for this one (since the wide angle really throws corner focus off when you reframe it). Could this be it? If not, what else?
I'm using an A4 13x21 chart. It's enough to fill the frame with 9 shots at minimum focus distance.

I am having the same problem with my d7000. This happens regardless of software used to convert NEF files, so if I had to guess at why this is happening I would say that the d7000 maybe has a different format for its makernotes, which is where the lens information is stored, and the lens profile creator doesn't read it.
Here's what happened when I tried to profile my 50mm f1.8 nikkor: I took 9 pictures at f1.8 and nine at f2.8. The profiling worked fine on both. So I ran it first on the f1.8 set, and saved it. Did the same for the f2.8 set and tried to save it, but it wouldn't allow me to append the file to the existing one, giving me the "inconsistent" error discussed here. I then save the second profile separately.
I opened both on windows notepad, and this is the lensID inconsistency already discussed here:
The profile I did with the f1.8 set had this line in it:
<stCamera:LensID>76</stCamera:LensID>
And the profile I did with the f2.8 set had this line:
<stCamera:LensID>179</stCamera:LensID>

I had an app previously, but now it shows I do not. How can I retrieve this, since I've already paid for it? I have 2 photos- one showing it in my cloud- and two the app itself. Please help

I had an app previously, but now it shows I do not. How can I retrieve this, since I've already paid for it? I have 2 photos- one showing it in my cloud- and two the app itself. Please help

redownload it,, either by syncing with iTunes or directly from your phone using the app store.

Tax error: Precedence Level: This Precedence level is already in use.

Customer applied Vertex integration with Oracle Etax ,while update tax juristiction information and apply ,the error is out like below:
Precedence Level: This Precedence level is already in use.
You must create unique precedence levels for tax jurisdictions that apply to the same tax.
Customer wonder precedence level logic .
Is any one know about precedence level?
Thanks,

This is usually because the drive letter assigned to the network share is taken by something else. Maybe, by a removable drive.
Moderators and other answerers do their best to help specific cases, but everyone has their own situation. Apply common sense to the replies you find in the forums.
When you typed dir z: - is Z: the drive letter you wanted for this share, or it was automatically assigned?
-- pa
Alternatively you could try using common sense when you post, as well as taking the time to read the entire issue post so that you can avoid showing both your ignorance and arrogance (arrogance without any competency to back it I might add).
Suggesting that it might be "another drive" that took over the mapping shows your lack of reading comprehension and is unhelpful. Please take the time to, once again, read first.
Lastly moderators here generally show little technical skill beyond entering search words into a knowledge-base of articles and then applying the results incorrectly further exacerbating the situation for the customer.

I bought creative suites over 3 years, but now cannot update and registered in my account, the error massage are:This serial number has already been registered. Products can only be registered once.

i bought creative suites over 3 years, but now cannot update and registered in my account, the error massage are:This serial number has already been registered. Products can only be registered once.

The message is correct. You can only register a product once... there is no need to register again after you do it the first time. You can re-install and activate with the serial number, but there is no need to re-register.

HT3275 Help? Time Machine could not complete the back up due to iMacsparsebundle is already in use??? This is the error message I am getting now with my Time Capsule as the back up device. Any suggestions?

Help? Time Machine could not complete the back up due to iMacsparsebundle is already in use??? This is the error message I am getting now with my Time Capsule as the back up device. Any suggestions?

Pull the power cord from the back of the Time Capsule
Wait a few minutes
Push the power cord back into the back of the Time Capsule
See if the Time Capsule will back up now
If not, see #C12 in this document:
http://pondini.org/TM/Troubleshooting.html

This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

My current Apple ID, for which all of my content has been downoaded (e.g., music, apps) is associated with a work email address that I will no longer have access to in the near future. In my Apple ID account, I noticed I had two alternate emails listed, one is my .me account and the other is my .gmail account. I use my .gmail account, and it is the primary email I use with friends and family. I noticed both were not verified, and when I tried to, it said they were both associated with other accounts. I was able to log into a separate Apple ID account I must have set up at tone point with my .gmail, and I changed the email address to a new one I created. I also deleted the gmail account from any other Apple-relted account I could think of. I am still gettgin the same error message when I try to add it to my current Apple ID: "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID."
My concern is this: with FaceTime and now iMessage, it seems more important than ever that I am able to use my correct email address. With iOS5 beta, I cannot enter either my .gmail or.me accounts under "You can be reached for messages at:" as I get an error stating: Unable to verify email because it is already in use."
How can I remedy this issue and assign my .gmail account to my Apple ID?

Re: Cant verify Apple ID
created by kelly218 in iTunes Store - View the full discussion
I just spoke with a technician at Apple. I hsven't been able to verify because the wife has the phone. but he said all that you need to do is:
1) Go to Settings --> iTunes Store and login with your Apple ID and pwd
2) Go to Settings --> iCloud and login with your Apple ID and pwd
seems that the phone requires you to login to the store first...

ERROR ITMS-9000 "File given does not match type JPEG....

I'm trying to upload our iBook. I first did an export outside of publish, then did publish and reloaded everything under the .itmsp file publish created. About 10 minutes into the upload, I received a message that read:
1 Apple's web service operation was not successful.
2 Unable to authenticate the package ISBN#...:itmsp
3: ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@387eb9b2[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
4 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@6bad662[userString=Thi s file does not start with a start of image marker.] at Book (MZitmspBookPackage)
5 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@450fcee3[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
6 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@69c736ea[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
7 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@15e672e7[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
8 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@4c812a6ec[userString=T his file does not start with a start of image marker.] at Book (MZitmspBookPackage)
9ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@54180fd6[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
Any suggestions would be greatly appreciated.

I had done screen shots on the iPad and then emailed them to my Mac. I then worked to cut the black bar off the top, but some how Photoshop wasn't saving them correctly. I couldn't even reopen them in PS. So, I downloaded them again, went back in, saved them as .jpegs and then reuploaded. That solved it. It was quite bizarre.
Now trying to get the description listing right in the iBookstore.
I wrote the piece out, I thought in TextEdit. Then pasted it into the box in iTunesProducer. When I was getting the error message above, it also was saying that there's a 4,000-character limit. So, I copied it into Pages and did a character count and saw 3,887. I still had to cut about 500 chactacters out. Support responded and said I was still very close to the limit, so I don't know what it was they were counting. My Pages counter said it was close to 3,300....
My problem now is that they have bullet points on lines with no text now. They've fixed it from how it was first diplaying. So, I'm trying to get that cleaned up. It's their fault, but it looks like me, the publisher, is the one who is clueless......
Here's the link to our iBook!
http://itunes.apple.com/us/book/2012-science-prophecy-ancient/id555557425?mt=11

This Apple ID has already restored to the maximum number of devices in the last 90 days

Has anyone seen this error message "This Apple ID has already restored to the maximum number of devices in the last 90 days"? We get this when we use iCloud to restore a master backup to iPads in a school computer lab. The first 9 or so restores go without a problem and then we start getting the error. The iPads are running iOS 5.01.
We previously used iTunes to do the restore and did not have a problem, but it takes a long time to deploy to the 25 iPads. We were hoping that using iCloud would be faster.

9. You’re limited to a maximum of 10 devices. With the ability to re-download content from everywhere, Apple has limited the number of devices that can participate in iTunes in the Cloud for a given account. The new terms allow for a total of 10 devices, five of which can be computers running iTunes. This means you could have five iOS devices and five computers authorized, or one computer and nine iOS devices, or any combination of the two.
Fortunately, this limitation only applies to iTunes in the Cloud features—you can still sync content directly from an authorized iTunes library to an unlimited number of iPods or iOS devices; the limitation only applies to authorizing devices to re-download or automatically download content directly from the iTunes Store.

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error???

Whitespace is not allowed at this location. Error while running CP using RDF with XML

Hi All,
I am using RDF report with output type as XML. It have following parameters:
1. Organization Name,
2. Invoice No From
3. Invoice No To
4. Date From
5. Date To
I had developed an RTF and registered that in Oracle Applications. The output comes in Excel file.
When I used to run report using Invoice Number From and Invoice Number To the report is giving normal excel output.
But when I am running using parameters Date From and Date To then XML output is coming after viewing output in CP Output button.
I downloaded that xml file. It is invalid as in the last of xml file it is showing following error message
"Whitespace is not allowed at this location".
Please let me know how can I resolve this problem.
Thanks in advance..
Regards
Sandip

my xml file looks like this....

<XX_ITEM_LOADING>
<LIST_G_BLANKET_NUMBER>
    <G_BLANKET_NUMBER>
      <CUSTOMER>SPS PVT LTD</CUSTOMER>
      <INVOICE_NO>17356</INVOICE_NO>
      <INVOICE_DATE>20-JUL-13</INVOICE_DATE>
      <BUYER_REF>56780YP</BUYER_REF>
      <ITEM_DESCRIPTION>XXCSD</ITEM_DESCRIPTION>
      <NUM_OF_BEANS></NUM_OF_BEANS>
      <CARIRER></CARIRER>
      <SHIP_METHOD_CODE>UK568</SHIP_METHOD_CODE>
      <MODE_OF_TRANSPORT>ROAD</MODE_OF_TRANSPORT>
      <ASSEABLE_VALUE>1134534</ASSEABLE_VALUE>
      <QUANTITY>149</QUANTITY>
      <SOLD_TO>SPS PVT LTD</SOLD_TO>
      <TAN_NO></TAN_NO>
      <ST_REG_NO>943481</ST_REG_NO>
      <EC_CODE></EC_CODE>
      <TERMS>30 NET</TERMS>
      <CUST_PO_NUMBER></CUST_PO_NUMBER>
      <DESTINATION>LONDON</DESTINATION>
      <CP_DAYS>3</CP_DAYS>
    </G_BLANKET_NUMBER>
XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Whitespace is not allowed at this location. Error processing resource 'file:///C:/Users/sys/Downloads/cp_output_date_range....
      <SOLD_TO>DKSP TECHNOLOGIES & ENGG(A DIV. OF PARROT SYSTEM LTD.)</SOLD_TO>
_METHOD_CODE>

This is my error already i had given code

Similar Messages

Maybe you are looking for