This is my first day so I'm green (very new) to SAP. So far I love what I'm learning but...

Where can I go to have a start point. Does SAP have a start application so I can learn how to configure.
I don't want to learn in the middle. Of course unless that is how you learn

Hello Tiffany,
openSAP is also good tool and I am also attending some courses there. But I think it is not so important for a real newcomer. Anyway, if you found them interesting, why not go for more of them.
But I am writing this post, because I have another advice for you. I still do not know which part of SAP you want to learn or which position you would like to work at? But some days ago I have tried to install SAP on my personal computer. It was SAP ABAP server, SAP GUI and also ABAP in Eclipse tool. It is very good practise for administrator and also very good start point for developer. Have a look on this thread, which was my "manual" How to install SAP NetWeaver Application Server ABAP 7.03 SP03 Trial – Ready for ABAP in Ecplipse (AiE). Also you can check my blog about the experience during installation and AiE try Meeting ABAP in Eclipse for first time.
Best regards and good luck

Similar Messages

How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy

This is my first mac laptop. Do I need internet security/virus protection? If so, what is recommended?

This is my first mac laptop. Do I need internet security/virus protection? If so, what is recommended?

Additional informaton about OS X security can be found in Thomas Reed's Mac Malware Guide.
In addition to what Bimmer 7 Series has suggested...
Keep Java (not JavaScript) disabled in all your browsers and if you have not installed it yet, don't do so unless you are told that you need it in order to run a critical application or visit a web-site that you must use.
You won't need your Firewall turned on as long as you are on a trusted network using a strong WPA2 password for WiFi, such as your home or workplace, but be sure to turn it on when you need to take your MBP to Starbucks or some other public hotspot.

I have the new iphone 4S (this is my first iphone) I am having trouble connecting to my bluetooth device - the iphone is searching for the device but won't recognize it (my bluetooth device is a jawbone)

My iphone 4s does not recognize my bluetooth device - I don't know why
My bluetooth device is a jawbone and I have turned it on and sitting next to my iphone which is searching for bluetooth devices but will not recognize it
Not sure why

dugasgre wrote:
Thanks for the advice
I just tried turning the jawbone off and then turning it on and shaking it 4 times but the iphone 4s still won't recognize my jawbone
Do I need to unpair the jawbone from my blackberry first? And if so, how do I do that?
so after double shaking, is the ring flashing red +white? If it is not, then it is not in pairing mode. (I'm assuming you have the ERA) And you see nothing on the iphone? Nothing is found? Or is the device found, but not paired.
try placing the jawbone in pairing mode first, and then turn off/on the iphone blue tooth.
I don't think you need to unpair with the BB. But you can try. go to BB settings and there should be a way to forget the device.

I have recently bought an iPod touch 4th generation. The first day I could connect to the app store from my iPod and download what I wanted then today every time I try downloading something a message pops up saying " cannot connect to the iTunes store" y

I just bought An iPod touch 4th generation yesterday, it was working fine I could
Download appl from the store from my iPod without a problem . Today however every time I try downloading something from my iPod touch
it. Doesn't download a message pops up saying " cannot connect to iTunes store" why? I am connected to the Internet and I can easily go on safari and google with. NO problem but everytime I go on the app store it gives me that message can you please help? My iPod isup to date and so is iTunes I so tried bar restarting my iPod and it worked for about 2 minutes the the message kept popping up Again please help me . Thank you

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
If your iPod is defective and not abused Apple will exchange it at no cost.
Apple Retail Store - Genius Bar

EA6500 First Day Impressions & Advise.

My first impressions of the EA6500 are a little rocky, anyone who doesn't know router settings like I do or knows their way around web-based browsers probably won't be able to even get online, yes really. This router has probably in my opinion been rushed out, now don't get me wrong, the hardware is excellent but the software has been rushed and in its current state is rather poor.
1. Firstly, before you buy this router make sure you pre-download the firmware update for it, otherwise you'll be like me for 2 hrs wondering why you can't get online. The fact that you cannot even get online without the firmware upgrade is an absolute disgrace, and it was only after a while I remembered about reading about needing a firmware to get online from this forum. No firmware upgrade disc, nothing, so I had to log onto next doors internet and download it, then upload it to the router.
So make sure you get the firmware before hand.
2. After the first major firmware update make sure you then do a full factory default, again I only didn't this after remembering something on these forums, how a regular consumer would know to do this; I have no idea. If you don't do a full factory reset the router can run fine if left on, but after doing a power cycle cannot connect to the internet in any way. I later found out that this was caused by the MAC ADRESSE CLONE being on, and after a factory default this option is turned off, actually after the new firmware and factory default many options are completely different from what they were before.
3. So, after you have the firmware, after you have done the factory default the router will work as expected. The next thing users need to do is add DHCP RESERVATIONS to all devices, and here's why. Well, one its easyier to control things, and two is labelling.
So, add one devise at a time, the reason for this is it would consider 2 xbox say a networking devise, and you cannot distinguish one devise from the other. To get around this, turn one devise on at a time, go to devise list and rename it, if its a PC with a name like MARK-PC then that is already enough. This comes with xboxes, playstations anthing with a generic name, printer, possibly i-phone, those types of devises. So rename every new devise like this that accesses the network, and you can then distinguish which xbox or which playstation is who's.
4. WIRELESS, this is my opinion, use channel 1,6 or 11 for 2.4GHz band, I use 11, seems to have much less intererance. For 2.4GHz use G-ONLY, Im seeing alot of disconnects and packet loss using mixed.
Im not to sure of the 5.0MHz band because I don't use it, I don't use it because I feel there are more lag issues when using 2.4, 5.0 and ac all at the same time, I personally just turn 5.0 and ac off. Thats for now, things may improve a bit more in a new firmware.
5. MEDIA PRIORITIZATION & FILTER MULTICAST STREAMS, right now Im turning it off media prioritization, seems to be potentially causing bandwidth crush on devises that have normal priority.
Im checking filter multicast because it is potentially causing bandwidth crush when streaming from twitch tv or youtube and playing on an xbox.
6. MTU I used a low MTU on my old router, 1364, just enough for xbox live, after doing so on this router I kept getting lag outs. After changing the MTU back to auto and checking filter multicast streams, things are back to normal and appear so far to be lag free.
Im personally still trying to figure out what is causing the lag spikes, but its one of the 3, media prioritization, filter multicast or MTU. I assume this because nothing else controls packets and bandwidth like these 3.
Thanks for reading, this really a first day check list for new users, Ive personally had quite a bit of fun knowing what does what on this router, and after getting a few settings in place it does appear to be a really good router. For networking noobs however its pretty unacceptable from Linksys, the setup that needs to be done its shocking; pre-firmware. Maybe in a few firmwares time this router maybe incredible, and I hope it is, but right now it just seems a little un-finished, and a little un-professional right now, but lets hope things change. This router has huge potential I just hope the software guys at Linksys can keep up.

TWISTED BULLET wrote:
Ive tried port forwarding and dmz and that didn't change the 2nd xbox in any way, the only way to make the 2nd xbox open NAT was port triggering, but then the first xbox becomes moderate.
Putting the router behind the DMZ also failed and was still moderate.
Ive heard swtches do not work, but I guess I could try putting my old router into bridge mode, but I can't see how bridge mode or using a switch would help or work. This is just the limitation of NAT routers/modems I guess.
Connecting 2 Xboxes should work thru the router. Please refer to this configuration I've found and try to double-check the settings you've set on both consoles so with the router's.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=082ee344b4754044b1ff95fcd78b5305_4576.xml&pid=80&r...
http://www.unofficialguidetolive.co.uk/faqs/60-two-xboxes-using-one-router-internet-connection
http://www.unofficialguidetolive.co.uk/

First day of next month

Hi,
My requirement is to display the first day of next month when a month and year are selected in the dashboard prompt. .
I have 2 prompts, one for Month and the other for Year.
For example if an user selects 2012 for Year and 09(September) for Month, my column in the report should display 10/1/2012
Please help in getting this logic working.
I am using OBIEE 10.1.3

Use min(date), this always return first day of selected Year,month
Then add a month to this date.
Or else get the date of the month and use at DATE
TIMESTAMPADD(SQL_TSI_MONTH, 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( DATE) * -(1) + 1, DATE))
Pls mark as correct/helpful if helps
Appreciate if you update your other post with helpful/correct
Edited by: veeravalli on Oct 2, 2012 11:53 AM

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

I have a new Macbook Air and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on. The computer is not hot.Any ideas on how I can fix this please ?

I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?

Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath

I went to make a call this morning, and all my contacts have disappeared! How can I can them back? I only just entered them all the other day, this is my first iphone

I went to make a call this morning and all my contacts have disappeareed, how do i get them back? This is my first iphone (4s) and i only just entered them all manually 4 days ago! Please help me!

I entered them directly into my phone. Two days ago, I plugged it into my mac and synced it with itunes, but i didn't sync the contacts and they were still in there after.

Hi ..... i forget my icloud id and i format phone with pc when it turn on it say (activating iphone) now plz plzzzzz help my i get this iphone before 10 days ONLY this is my first time to use iphone plzzzz help

hi ..... i forget my icloud id and i format phone with pc when it turn on it say (activating iphone) now plz plzzzzz help my i get this iphone before 10 days ONLY this is my first time to use iphone plzzzz help

but i already try to remember ,,,,,,,,,,,,, that mean my iphone it will not open again

HT201303 I have rented 2 movies the past 9 days and they won't transfer to my iPad - error message says that they cannot be played on my iPad. I haven't watched either movie and this is the first time I have ever had this happen.

I have rented 2 movies the past 9 days and they won't transfer to my iPad (first generation). Get the same error message that says they cannot be played on my iPad. I haven't watched either movie and this is the first time I have ever had this happen after several successful movie rentals and transfers.

When you have a query please post the feed URL rather than its contents. For the record, yours is at
http://www.honywoodschool.com/podcast/44986
I don't have an iPad to test this, so I can only refer you to Apple's Podcast Tech Specs page:
http://www.apple.com/itunes/podcasts/specs.html#formattingvideo
This says that the maximum video size for an iPad is 1024x768 - your latest episode is 1280x720.
Slightly confusingly, it also says
'iPad & Apple TV can play the following video formats:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format'
which suggests that mp4 files are even more limited.
Incidentally your feed gives this URL for the media file:
http://www.honywoodschool.com/user/59/133934.mp4
However when downloaded this produces a file called 'howtosetupappeid.mp4' so soe sort of redirect appears to be in place, and these can sometimes cause trouble. It's better to link directly to the file - it's possible that the iPad doesn't handle the redirect.
That's all I can suggest: if it still doesn't cover the problem I can only refer you to the iPad forum where someone may be able to actually try your podcast and offer a comment.

TS1347 when syncing my iphone with my Outlook calendar, a few days appointments did not show on my iphone calendar while other days did. I have done this several times in the past, and this is the first time I've had any troulbe

when syncing my iphone with my Outlook calendar, a few days appointments didn't show in my iphone calendar, but other days did. The appointments show in my outlook calendar. I have done this many times, and this is the first time I have had this kind of trouble. Any idea what has caused these appointments to not show?

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

I've bought a few songs recently and they played the first day but now it says that i need to Authorize my computer with is already authorized How can I fix this?

Ive bought a few songs recently and they played the first day but then when i go to play them again it say i need to Authorize the computer which is already authorized I don't understand can someone help me??

Hello there, HelpMePlease117.
There is a good Knowledge Base article that helps resolve authorization issues you might want to look over:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Any one of the steps listed there should help you get to the bottom of your issue and resolve it for you.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Why can't I hear sound from my keynote presentation while using Apple TV? Presentation is in 5 days and this is my first time using the iPad for presentation.

I am new to apple. But a quick convert since I just went out and got the iPhone as well.
I am using keynote Apple TV and the iPad wireless
I made a mini movie in iMovie trailer and have it in my presentation. Everything mirrors perfectly except the sound on the audio. So I can see the movie just can't hear it.
Presentation is in 5 days and I'm starting to get nervous haha
Any help is hugely appreciated
Rob

is I learn still around -? That was VERY HANDY!

This is my first day so I'm green (very new) to SAP. So far I love what I'm learning but...

Similar Messages

Maybe you are looking for