This is not the logical system of controlling area 2000

Hi,
While creating Activity type / price planning in kp26....i am getting the the information like...
"This is not the logical system of controlling area 2000"..
but i am using the company code 3000 which is assigned to the controlling area 2000....
so...kindly tell me how to come out of this....
Thanks in advance..

Hi,
I assume the error is either KC028 or COCORE081. In any case: please check if you have activated an ALE scenario for the relevant controlling area in TA OKKP1. Then check if the logical system differs from the system defined for you client in TA SCC4. If this is the case, then that is the reason for the error.
Regards
Karl

Similar Messages

An RFC destination could not be specified for the logical system

Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
Khushboo

Hi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo

Not converting the logical system through BDLS

Hi Experts,
I did the system copy of BI system from production to developemnt
To change the logical system in RSA1 --> Source systems
I have choose client role as test in scc4 and in tcode BDLS i have given the old logical system name new logical system name
after completing the job RBDLSMAP i checked in the RSA1 there is no change in logical sytem
i got the following message
SM37 log
Job started
Step 001 started (program RBDLSMAP, variant &0000000000005, user ID ABCD)
Logical system name ABC500-1 does not match SAP's recommendation
Job RBDLSMAP no longer exists
Converted table: 'RSSTATMANSTATUS'; number of changes: ''
Converted table: 'RSSTATMANSTATDEL'; number of changes: ''
Converted table: 'RSSTATMANREQMAP'; number of changes: ''
Converted table: 'RSSTATMANREQMDEL'; number of changes: ''
Converted table: 'RSSTATMANPSA'; number of changes: ''
Converted table: 'RSMDATASTATE_EXT'; number of changes: ''
Job finished
Spool log
Table Name                Field Name       Number of Relevant Entries    Number of Converted Entries
/BI0/ABP_CUST00*          LOGSYS                              0                              0
/BI0/ABP_CUST40*          LOGSYS                              0                              0
/BI0/ABP_VEND00*          LOGSYS                              0                              0
/BI0/ABP_VEND40*          LOGSYS                              0                              0
/BI0/ACDS_DS0400*         LOGSYS                              0                              0
/BI0/ACDS_DS0440*         LOGSYS                              0                              0
/BI0/ACDS_DS0500*         LOGSYS                              0                              0
/BI0/ACDS_DS0540*         LOGSYS                              0                              0
/BI0/ACLM_DS0300*         CLM_FISY                            0                              0
                          LOGSYS                              0                              0
/BI0/ACLM_DS0340*         CLM_FISY                            0                              0
                          LOGSYS                              0                              0
/BI0/ACLM_DS0600*         CLM_FISY                            0                              0
                          LOGSYS                              0                              0
/BI0/ACLM_DS0640*         CLM_FISY                            0                              0
                          LOGSYS                              0                              0
/BI0/ACRM_CMGL00*         LOGSYS                              0                              0
/BI0/ACRM_CMGL40*         LOGSYS                              0                              0
/BI0/ACSM_LINK00*         LOGSYS                              0                              0
/BI0/ACSM_LINK40*         LOGSYS                              0                              0
/BI0/AGN_BP00*            GN_PAR_LSY                          0                              0
/BI0/AGN_BP40*            GN_PAR_LSY                          0                              0
/BI0/AGN_CONV00*          LOGSYS                              0                              0
/BI0/AGN_CONV40*          LOGSYS                              0                              0
Could any body help me in this
Thanks & Regards,
Arun

Hi experts,
I have done the system copy form Production to Developement.
Transfermations and DTP(Data transfer process) are still connected from Produciton R3 which should be from developemnt R3.
I have tryied to change the logical sytem name through BDLS. But the logical system name is not changed
i got the job log which is in above conversation in my thread.
Please let me know how to change the logical system name in Transfermations and DTP in RSA1
Thanks & Regards,
Arun

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

How do you identify the Logical system in start routine of a transformation

My scenario is this. I have five r3 systems that I am extracting from. In the start routine of the transformation from the r3 data source to my data store I am going to delete data and I need to know the source system id. How do I identify the logical system or source system id in the transformation. Is there a system field that contains this information. I do not want to hard code the source system id in the routine.

hi
have a lool at tables rsreqdone and rsbkrequest with a join you should be able to determine the source.
regards
Boujema
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).
Edited by: Boujema Bouhazama on May 9, 2008 12:04 AM

Error in the logical system (BW - R3 connection)

Hey guys, i need help, actually i created a connection between BW and R3 system, but i think i wrongly assigned the details to another BW system and now whenever i tried to load the data, it's not being processed.
And i checked and it shows me that the connecetion is between source system (538) and BW (B3T800), though my BW client is BW (BW TEST). so how do you think i can change my background users i assigned while creating the source systems, because i think, while creating the source system, i used wrong background users. So instead of connecting via logical system (BW test), its connecting via (B3T800) to SAP R3 (538).
--> Also i tried changing the Logical system name, as i checked and showed that for my BW client now it has a entry of the BW system (B3T800) and when i tried chnging it, it let me change that, but when i went to the RSA1, SAP doesn't let me access that, saying a message "your logical system has been changed", so can i change the logical system, do you guys think my problem will be solved?
Regards,
Amit Jaidka

I have checked in SM37 taking that request number and when i checked the job log , its showing
5 LUWs confirmed and 5 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
Lock table overflow
Job cancelled after system exception ERROR_MESSAGE
what is the reason for this termination in R/3.
Thanks

Use and impact of the logical system (SCC4)

An error has been made in our SAP system (production environment), transaction SCC4. The field «Logicial system» has been changed from «PRD460» to «QAS460». It has been left this way for few weeks and when we realized the mistake, we changed it back from «QAS460» to «PRD460».
For few hours, the document numbers in MM (t-code MIGO) were generated, but were not found in t-code MB03. We were able to generate them manually in t-code SM13 and the problem was solved.
What is the use of the «Logicial system» ? What could have been the impact on our database and on the integrity of our system of having the wrong logical system set to our production environment for few weeks ?
Thanks.

Hi,
Logical System Names
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
Anil

To get the logical system names of all the child systems in a CUA envirnmnt

Hi Gurus ,
Is there any table where we can find the logical system names of all the child sytems in a CUA environment .
This is for a requirement that i need to develop an automated process where we can reset the password of all the child system in a CUA environemt when requested by the user at once .
I found some tables such as V_TBDLS , but they do not contain the exact information what i need .
Thanks in advance ,
Harshit Rungta

Hi,
You are in the right track. BD54 will show you the logical system name for all the existed systems in CUA.
Else you can also go to your CUA system and execute t-code SALE --> Basic Setting --->Logical Systems ---> Assign logical system to client -
> Display details
here you can see logical system names for all the clients assigned to CUA.
Thanks,
Deb

How to change or rename the logical system name T90CLNT090 IN BI 7

HI Expert's,
i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
because of this i am not able to create the source system between r/3 also.
so how to change this source system name for T90CLNT090.
regards
harikrishna N

Hi,
Pls follow this OSS note : 325525.
Note 325525 - Copying and renaming systems in a BW environment
Summary
Symptom WARNING: THIS NOTE HAS BEEN REPLACED. FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
           Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
           Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
           Reactivate all partner agreements that carry the new logical system name after renaming.
Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
           Solution scenario 2):
If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                    Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                    Reactivate all partner agreements that carry the new logical system name after renaming.
Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
Scenario 3) You want to copy a single BW system of the group by database copy.
Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                     Solution scenario 3)b): See Note 184754.
Scenario 4) You want to copy a single source system of the group by database copy.
Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
           Solution scenario 4)b): See Note 184322.
Scenario 5) You want to import a client copy in a source system.
           Solution scenario 5): See Note 325470.
Thanks & Regards,
Suchitra.V

Getting the logical system from where RFC is being called

Hi All,
How can we get the logical system name from where RFC is being called?
Regards,
Akshay

Hi Akshay,
If your company follows the SAP recommendations on naming [logical systems|http://help.sap.com/SAPHELP_NW70/helpdata/EN/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm] <b><SystemID>"CLNT"<Client></b> then you should get away with a simple call to RFC_GET_ATTRIBUTES (and even if they don't, the function module might possibly provide other clues required to build the logical system name).
There might be other ways, but I'm kind of suspecting that the logical system name of the calling system might not be part of the communication data (like other readily available data as IP address etc.). So if this solution doesn't work, it might be helpful to understand how the naming conventions for logical systems used by your company.
Cheers, harald

Audio engine overloaded (this is not the usual problem!)

Hi people
it's so frustrating I could cry. This is not the usual "I have 10 software synth running and get overload message".
Bottom line is: Even with a new project and logic stopped the CPU meters go up to 100%. It happens every 5 - 15 secs. What is strange that the system monitor does not show these spikes. I know it's just sampling but at least some of the spikes should be caught by the monitor. But it's steady at around 10-15% user and system. There is of course no other process eating cpu.
Console looks like this:
Mar 5 00:34:13 noname Logic Pro[902]: Audio engine overloaded, resetting
Mar 5 00:34:43: --- last message repeated 1 time ---
Mar 5 00:37:11 noname Logic Pro[902]: Audio engine overloaded, resetting
Mar 5 00:39:34 noname Logic Pro[902]: Audio engine overloaded, resetting
Mar 5 00:40:04: --- last message repeated 1 time ---
Mar 5 00:41:15 noname Logic Pro[902]: Audio engine overloaded, resetting
Mar 5 00:42:40 noname Logic Pro[902]: Audio engine overloaded, resetting
I swear: yesterday everything was fine. Now it's not working anymore. I'm a developer with 10 years coding and debugging experience but I can't find the solution. I had this problem before. Everything was running smoothly for months and one bad day the problem started. I could not find a solution till I gave up and reinstalled the whole system which took me about 3 days to get everything in place again. Again everything fine for about 3 months.
Not matter what I try - deleting prefs. Starting logic as a new user. Reinitializing everything. Doesn't help. Is there anybody out there who had that problem too? I don't want to reinstall everything again.
Cheers,
Daniel
Message was edited by: doubleday

I using a Line6 TonePort (I am a guitarist).
To make sure that its not the drive (though nothing changed there) I switched setting to internal audio - but that didn't change a thing.
And yes I tried the basics. I also disabled all plugins / AUs in the AU-Manager but I haven't tried to move them away. Give that a try this eve.
It's really strange. It doesn't matter wether it's a new empty project or any other that worked with no probs. Even if logic is stopped and there's no input monitoring: CPU load is flat and then every xyz secs boooom 100%. And its real because it actually interrupts the sound of my guitar or whatever.
I might have to dig deeper and see if I find any tracing tools which might provide more info..
Aaaaargh!
The only thing I actually might tried the first time yesterday evening which I haven't done before is a roland vdrum via midi to ultrabeat but how could that mess things up? I dunno ...

SAP System is not the original system of the object being edited

Hi All,
We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
How we can resolve this situation.

Hello Guys,
Thks for your input.
@Vinod,
We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its a replica of old dev to nev dev with SID change.
@Arjun,
I already check TADIR table and and its pointing to new SID.
@Ashok,
As i said earlier,post intallation is already completed.
Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
Thx,Nilesh

How to configure the logical system?

hi,
can you please provide the steps to configure the logical system?
Thanks & Regards,
NANDA

Hi,
Configurations in the SAP Source System
http://help.sap.com/saphelp_nw2004s/helpdata/en/27/8d8342a7d30d53e10000000a155106/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Connect BI system to R/3
Hope this helps.
Thanks,
JituK

"the current system is not the original system" in uccheck

Hi Friends,
I get a message during the unicode conversion. Can u help me how to rectify this error.And also would be grateful if u can given some links regarding this issue and why this error message is raised.
"the current system is not the original system" in uccheck transaction of unicode conversion.
thank you
chandra

Do you still need help on this?
Please refer to SAP notes that can provide some hints
#997198 UCCHECK: The current system is not the original System
#963311 UCCHECK reports errors on XSLT sources
cheers,
Vincent

This is not the logical system of controlling area 2000

Similar Messages

Maybe you are looking for