This is probably one of the dumbest......
ok, i used logic express for about 6 months now. i have no problem recording real audio instruments,mixing,mastering,blah blah....well now i've jumped into the midi world. and for the life of me i cannot figure out how to record it. i can get audio out of my midi controller by selecting and intrument and adding my selected instrument/effect...if someone could help me out, or point me to a tutorial page i would be most appreciated.
sorry for the dumb question, but im stumped
I guess I can answer a "dumb" question with dumber answers.
1) Do you have the controller turned on?
2) If you do is it plugged in?
3) Is is a midi instrument or an Audio software instrument?
G4 iBook, G5 Powermac Mac OS X (10.4.6)
Similar Messages
-
I only have 1 vi and its not missing. The 1 vi claims the owning library has blocked the execution of the VI. The class has the error "This VI is part of a LabVIEW class. No part of the class is executable at this time because one of the member VIs is missing. Find the missing member VIs on disk and load them into memory or delete them from the class definition in the project tree."
But there is only 1 member vi!!??
I had lots of other vi's as part of this class but somehow this class got botched with this error. I removed all vi from the directory and from the class definition and re made just the one assessor vi and still got the error message.
I have attached my ridiculously simple class.
I have other classes that work fine but somehow this one seems to have gotten botched. I really need to understand what happened here and how to recover/avoid this error or I will not have the confidence to develop large applications using classes.
In other words...PLEASE HELP!
Solved!
Go to Solution.
Attachments:
Tree class.zip 14 KBI cannot tell you why. Only what it is missing.
If you look in the Tree.lvclass file using something like Notepad, towards the bottom you will see some XML that looks like:
<Item Name="Untitled 1" Type="VI">
<Property Name="NI.ClassItem.ConnectorPane" Type="Bin">#1#!!!!!!!)!"1!&!!!-!%!!!@````]!!!!"!!%!!!$H!!!!#1!-1#%'=X2B>(6T!!!,1!-!"'.P:'5!!""!-0````]'=W^V=G.F!!!71&!!!Q!!!!%!!AFF=H*P=C"P>81!"!!!!#*!=!!?!!!/$&2S:75O<(<'&T=Q!!#&2S:75A<X6U!!!A1&!!!Q!!!!%!!B.F=H*P=C"J<C!I<G]A:8*S<X)J!#"!=!!?!!!/$&2S:75O<(<'&T=Q!!"V2S:75A;7Y!0!$Q!!Q!!Q!%!!1!"1!%!!1!"!!%!!9!"!!%!!=#!!"Y$1A!!!!!D1M!!!!!!!!!!!A!!!!!!*!!!!!!!1!)!!!!!!</Property>
<Property Name="NI.ClassItem.ExecutionSystem" Type="Int">-1</Property>
<Property Name="NI.ClassItem.Flags" Type="Int">0</Property>
<Property Name="NI.ClassItem.IsStaticMethod" Type="Bool">false</Property>
<Property Name="NI.ClassItem.MethodScope" Type="UInt">1</Property>
<Property Name="NI.ClassItem.Priority" Type="Int">1</Property>
<Property Name="NI.ClassItem.State" Type="Int">1342841344</Property>
</Item>
Delete this block. Make a backup of the file before you do that. Start up LV and load the class again.
My guess is that something probably did not save properly when LV shut down. I have a large OO project and have had more than one occasion where I have corrupted the project but could ot figure out why.
Today I had a similar message which is why your post caught my eye. In doing some troubleshooting I found that it no longer 'knew' where one of my files was but it never complained when it loaded the project. I went back to the original project and tried to open that vi from the project. That is when it told me that the vi was not in the expected location, do you want to correct it. I said yes and all was better.
Trying to open all of the VIs in the class might have worked, but this can be cumbersome to say the least in a large class.
Good luck,
Kurt -
When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
We have a new computer and I cannot get my garmin running watch to sync with mozilla. The error message that I keep getting is"The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (connectagent) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
Help pleaseThis is for a special URL that starts with
connectagent://
instead of with
http://
is that right?
Two thoughts:
(1) Could you try changing a setting for your Garmin plugin. Here's what I mean:
Open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins.
Find your Garmin plugin change "Ask to Activate" to "Always Activate".
Your system information seems to list two different versions of a similarly named plugin. I'm not sure whether that is causing a problem.
(2) Does Garmin's documentation specify any extra steps to set up Firefox, other than installing its add-ons? -
HT4623 I'm no longer able to take video on my iPad mini this happened after one of the iOS updates
I'm no longer able to take video with my iPad mini this happened after one of the iOS updates. How can this be fixed?
Try sliding the words up/down to select the various modes.
-
Error: this type needs one of the following values('true','false')
I'm trying to use <c:if> in a jsp (in Workshop 8.1), as in:
<c:if test="1 == 1">
<!-- something here -->
</c:if>
But, I get the following message when I hover over the error indicator
at the test:
Error: this type needs one of the following values('true','false')
It will actually work if I do:
<c:if test="true">
<!-- something here -->
</c:if>
but, of course, that's useless.
Am I missing something here?David Karr wrote:
> The value of the "test" attribute needs to be an Expression Language expression. Try changing it to "${1 == 1}", and that should work.
Actually, I had tried that, and it would have worked that way if I had
the right taglib declaration -- I had accidentally left in the rt
versions, so a <%= test %> type of expression worked.
But, that's not the way I wanted to do it, so I put the non-rt versions
in, along with tld and jar files that I had in some other directories,
then it worked fine. In the process, when searching my hard drive for
standard.jar, I noticed I had four or five different versions, each with
a slightly different size. Of course, I had to tinker, and downloaded
the zip from Apache, figuring it would be best to have a matched set of
tlds and jars.
And now I get an error that the matching class cannot be found:
> ERROR: response.jsp:1: Package org.apache.taglibs.standard.tag.el.core contains no member type of this name.
and
> ERROR: response.jsp:14: The tag handler class was not found "org.apache.taglibs.standard.tag.el.core.IfTag".
But, if I navigate the standard .jar that is in my WEB-INF/lib
directory, lo and behold, there is the file IfTag.class in what appears
to be the correct package. -
Firefox doesn't know how to open this address, because one of the following protocols (itms-services) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
tried to fix in about:config but itms-services not foundn; also tried to fix using network.protocol-handler.external.foo but that wasn't listed either
trying to download an app related to a rewards gift card
firefox and os versions are up to date on MacBook AirHello!
Would you please provide the link you were trying to visit?
Also, you may want to post this question to the [https://support.mozilla.org/en-US/questions/new/desktop Firefox for Desktop Support Forum] . The Mozilla Support volunteers there may be able to better assist you.
I hope we can help you solve your problem. -
Tango Remote Control Music Player HD
I am interested in an app called tango remote. It needs two ios devices. I have an 8GB ipod touch. Is this sufficient for one of the devices?An iPod touch is an iOS device.
Why not contact the developer of the app? -
The Windows Live Network is unavailable from this site for one of the following reasons:
Reasons:* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site
It is getting stuck on the HTTPS login from microsoft. It works fine on IE and FF Beta. Have tried clearing cach, cookies, etc with no
fix. Please HELP.....Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
HHow many times do I have to write this?!?
ipad mini will not alert for facetime or skype calls. Yes everything is on. No, mute is not on. Fed up!Hello, pleaseacceptthisalias.
Thank you for visiting Apple Support Communities.
I would first start with forcing all applications to close and power cycle the device. Once this is done, have someone make a test call using these applications. If the issue persists, see the steps in the second article.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection.
Note: Notifications use Wi-Fi only when a cellular connection is unavailable. Firewalls and proxy servers may affect your ability to receive notifications. For more information, see Unable to use Apple Push Notification service (APNs).
If you're not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
iOS: Understanding notifications
http://support.apple.com/kb/ht3576
Cheers,
Jason H. -
How do I deauthorize the laptop when the original image and itunes is gone?
If you've reached five authorizations for your iTunes Store account, there will be a button in your Store account information that will allow you to deauthorize all systems associated with that account. Log into your Store account and you should see it. You can then reauthorize the computers you're using now.
Regards. -
I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
IProblem: "One of the USB devices attached to this computer has ...."
Hi, I'm having a problem with my iPod.. when I connect the iPod this message pops:
"One of the USB devices attached to this computer has ...."
I've searching a similar problem in the forums, and I have found many discussion about it, but any of them can solve my problem.
Well, all began like this, the iPod was attached to the computer AND showing on iTunes, suddendly the screen shines I DID NOT Eject it (the iPod was on its menu, not in the Do not disconnect screen) so I thougth it was ok... but the iPod was still showing on iTunes, so I ejected.
The iPod remains connected for about an hour then I disconnect it without any problems. The problems began when I connect the iPod again (2 hours later), the message "One of the USB devices attached to this computer has ...." pops, now my computer can't access the iPod (it isnt on My Computer or iTunes)...so the first thing I did was search a similar problem in the forums, I've found that exact problem in many discussions, and I've tried everything they say:
1. The Five R's
2. Uninstall and Reinstall iPod software and iTunes
3. Enable manually disk mode (still not recognized)
4. Check if the USB was low powered and Uncheck the "Allow the computer to turn off this device to safe power" (it isn't low powered 'cause the iPod was working with that USB)
No matter what I did, the iPod is not showing on My Computer, I hope you can help me out, tomorrow I will try on a different computer and a different cable
PD: Sorry for my poor English, I'm from Peru.
AMD Athlon XP 2400+ Windows XP ProI've got the same issue, looked everywhere, no solution seems to work.
-
I am attempting to redact a large pdf file. When I open the file, it has a bar across the top with the message "please fill out the following form". I can mark redactions, but when I attempt to apply them I get a message saying, "In order to proceed Digital Signatures must be removed and the document must be fully authorized. Do you want to make these changes and continue?" I click "ok". Then I get a message saying, "an internal error occurred." How do I get around this problem?
You cannot redact a signed document. This is because one of the things signatures guarantee is access to the OLDER document (i.e. there will be an unredacted copy in there).
In general you cannot remove signatures, but sometimes you can. Look under the Signatures tab (right click on left vertical bar if there isn't one) to see if it is removable.
Maybe you are looking for
-
Files are downloaded and only then encoded, so I end up with two files in the drive.
-
Assign GL account for Unplanned delivery costs
Hi, When I post a vendor invoice (MIRO) and I enter 'Unplanned delivery costs' (in table Details) I can't save the invoice because the sytem didn't find the GL Account for Unplanned delivery costs ?! Can anyone tell me please how to assign GL acount
-
Color Context not saving for Grid(Lights) Display Template
I am trying to add a column of colored lights for a Grid in a 12.0 (12.0.2, Build 88) environment. I select Grid, Grid Type = Lights. I go to Color Context and apply Green to PASSED and Red to FAILED and White to *. I then save the Display Templat
-
Hello All experts, I have to attached the document in delivery & in maintenance order.But as per my knowledge these are not standard object in SAP.So these can do with screen exit can any one tell is there are any standard exit are available for that
-
Hpe363xa_ConfigureVoltageLevel configuration of voltage 25 V is not possible.
I try to use hpe363xa_ConfigureVoltageLevel with "1" as channel parameter and a voltage value of 50 Volts with an HPE33634a device. The problem ist that the function accept voltage between 0 and 25 volts. Higher voltage (> 25 V) value causes an error