This is regarding the claims management

Hi All,
We are doing one third party intergration, which is related to the insurace domain, I need your help regarding the interagation with the cliams part of insurance. that is the claims management.
How can we get the claims management verticle in SAP.
Plesae do the needful
Thanks
JayRaj

Hi,
In case of Claim management to Collections & Disbursement integration, we need to include BAdI
ICLF_CD
However, since you are talking about , configuration of the CM system. I'ld need clarity on it.
The Insurance Line of Business
Policy Management already existing on SAP or on some legacy system
Access a claim from some CRM application
Different modes of claim processing
There are many other question, difficult to jot down each one them. Answer my first response and I think I'll be in a situation to help you out.
Cheers,
Anish

Similar Messages

Payroll issue regarding the Claims - /561 and /563

Hi Payroll Experts,
I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
The followng are the WT details
IN - Period
OCT 2011
     /101 Total gross amount     118,897.00
     /110 Net payments/deductions     76,070.00-
     /550 Statutory net pay     95343
     /551 Stat.net recalc.diff.     37,692.00-
     /552 Stat.net subs.adjustment      37,692.00-
     /559 Bank transfer                                                   34,317.00
     /560 Net pay     37,218.00
     /563 Claim from previous month     5,609.00
FOR Period
Sept- Oct
     /101 Total gross amount     49,213.00
     /110 Net payments/deductions      31,721.00-
     /550 Statutory net pay     41,529.00
     /551 Stat.net recalc.diff.     14,591.00
     /552 Stat.net subs.adjustment     23,101.00-
     /553 Recalc.diff.to last payr.     37,692.00
     /559 Bank transfer                                                   14,591.00
     /560 Net pay     14,591.00
     /561 Claim     5,609.00
I request some body to throw siome light on the same.

Hi Experts,
Thanks for everyone for replying to my query ,
I have a doubt that If you check the WTs /551 and /552 in the IN PRD, the negative sign is coming for both the WTs
Is it correct?
And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
So how do i handle this issue
IS ther any way to solve this differences?
Please Let me know how to solve this issue.
Thanks

Query regarding the Node manager configuration(WLS and OAM Managed server)

Query regarding the Node manager configuration(WLS and OAM Managed server):
1) In the nodemanager.properties I have added the ListenAddress:myMachineName and ListenPort: 5556
My setup : One physical Linux machine(myMachineName) has : WLS admin server, managed server(OAM 11G) and nodemanager.No clustered environment.
2) nodemanager.log has the following exception when I start the oam_server1 using EM(Enterprise Manager11g):
Mar 23 2012 1:39:55 AM> <SEVERE> <Fatal error in node manager server>
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:336)
at java.net.ServerSocket.bind(ServerSocket.java:336)
at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(ServerSocket.java:202)
at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:125)
at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unknown Source)
Default port on which node manager listen for requests is localhost:5556.I have changed it to point to my machine. The port should be of WLS admin server or it should be the managed server port?
3) I have started the NodeManager using the startNodeManager.sh script.
4) The admin server port is 7001 and the oam managed server port is 14100.
Any inputs on what might be wrong in the setup will be helpful.Thanks !

By using netstat -anp|grep 5556 you can check which process on your machine is using the 5556 port.

Crawled property category option: "Map all string properties in this category to the Content managed property"

I've been searching online, and haven't been able to find a definitive answer to this. Does anyone know what the following SharePoint 2013 Search Service Application, Crawled property category option does?
"Map all string properties in this category to the Content managed property"
It appears when editing a crawled property category.

Hi Vishal,
There is no Official documentation explaining the setting "Map all string properties in this category to the Content managed property". In my opinion, this setting will map all crawled properties which are in current category and
whose value is string type to the Content managed property.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

This is regarding the career suggestion between ERP consulting and ERP sales or presales.

Hi Everyone,
Thanks for reading this post as this would not give any knowledge to you but would help for my career progression.
I am presently working as SAP consultant in PP module in an MNC . I always had interest towards sales or pre-sales in the field of SAP.
I do not have idea why i want to shift y career path. But probably due to Monetary concerns.
I now want to know which career path is ore better and fruitful either SAP consulting or SAP sales or Pre-sales.
I have experience of 2 yrs as SAP consultant. I hold B.tech in mechanical and MBA in operations and systems.
It would be very appreciable if some one clarifies my ambiguity in between choosing the above mentioned careers.
Thanks!
Chaitanya.

Hi Krishna,
Let me answer your questions:
Interest & ability are not same. Some people might be interested but they have not done anything which actually proves the fact that the person is already established to make the call.
Are you interested in sales or consulting. If you say, you are interested in sales as they will give you more money then the next question you should ask yourself is, have you already enabled yourself to do the Pre sales or sales job.
Prerequisite to do Pre Sales/Sales job:
First: You should have good high level solutioning knowledge.
Second: You should be passionate to work on different industries.
Third: You should have already done 15/20 RFP.
Fourth: You have already worked as SME for some of the high level solutions that's given to client.
Fifth: You have already established yourself as a solution architect.
Sixth: You have more or less have good integration high level exposure.
Seventh: You are ready to travel with very short notices and always readdy with baggage.
You have mentioned that you have 2 years experience as SAP Consultant and with this much experience as consultant is probably not a very wise thought to move your career to presales.
So I would say consider the pre sales or sales option after you have at least 5 years or so and you have quite seen the functional side clearly. Though its not a very hard and first rules but it helps if you think in this way.
Let me know in case you have any other queries or need any clarifications.
Thanks & Regards
Subhasish

This is regarding the needs to implement VF04 and additonal functionality

Hi..
i have to implement new report with vf04 and some additional functionality in one report..
Kindly advise how i have to proceed ..
1. I have tried initally submit the VFO4 program and tried to capture the output data of the VF04 program
2. Iam unable to capture the output data of VF04..in this i have get empty records ..
For this i have done code like this:
DATA: list_tab TYPE TABLE OF abaplist,
DATA   : itab type vkdfif OCCURS 0 WITH HEADER LINE.
ata:lf_datum type sy-datum.
    lf_datum = sy-datum - 1.
submit SDBILLDL   WITH p_fkdat EQ lf_datum
    EXPORTING LIST TO MEMORY
                   AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = list_tab
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
    CALL FUNCTION 'LIST_TO_ASCI'
      TABLES
        listasci           = itab
        listobject         = list_tab
      EXCEPTIONS
        empty_list         = 1
        list_index_invalid = 2
        OTHERS             = 3.
LOOP AT itab .
write:/ itab.
ENDLOOP.
Thanks & Regards
RameshManne

hi..
This is actual requirement for me ...
Billing due list
Compare report output with results of tx. VF04 (billing due list for blocked sales orders).
Take in account the additional selection variables this report offers in comparison to tx. VF04.
Blocked invoice list
Compare report output with results of tx. V23 (Sales documents blocked for Billing) and VKM3 (Sales documents with a blocking credit status).
Take in account the additional selection variables this report offers in comparison to tx. V23 and VKM3.
if i submit with with out return it will display the VF04 output screen initially.
i want display VF04 and other additional functionality at a time.
Thanks & Regards
RameshManne

None of the solutioin Manager ST and ST-TAO packages were found

Hi all,
I'm in the middle of installation and configuration of SAP TAO. My SAP TAO was fully connected to the SAP SolMan (SAP EHP 1 for SAP Solution Manager 7.0) and to HP QualityCenter/QuickTest Pro (both with version 10).
But I canu2019t connect to the SAP ECC 6.0.
When i run SAT TAO 2.0.6.0, the error message that appears is "The following error message has been sent while cheking the connection to the Solution Manager backend system: None of the solution manager ST and ST-TAO packages where found. Ensure that they are installed.".
I install on SAP ECC 6.0, the files from SAP_TAO_2_0_ABAP / plugin 70x / (KITLRD1.SAR and KITLRDA.SAR), who after deploy with SAPCAR result on
a) CSN0120061532_0034496.ATT
b) CSN0120061532_0034496.PAT
c) CSN0120061532_0038764.ATT
d) CSN0120061532_0038764.PAT.
After that, i put that files on \usr\sap\trans\eps\in and run transation saint to uploading. I see sucess on that operation.
I run again SAP TAO, who is on the virtual machine on the HP QC and HP QTP, and i find again the error.
Important note: on the window of program of SAP TAO when we press the button "Test SAP Connection", the comment is "Function module "TAOAGENT" not found"
What I did wrong or what is missing?
Can anyone help, please
BR
Edited by: catalaopaulo on Feb 7, 2012 7:21 PM

Hi,
The so-called TAOAGENT Function Module is part of the ST-PI
abap package. This package shall be installed on the managed system
you are trying to test (this is NOT the Solution Manager backend).
Depending on the SAP TAO version you are using, you need to install
a corresponding ST-PI version.
You can check the compatibility matrix for further details on this.
See here:
https://service.sap.com/testing -> Additional Information -> Test
Management-> Compatibility Matrix
You can find the install package for ST-PI here:
- http://service.sap.com
- SAP Support Portal
- Software Downloads
- Support Packages and Patches
- A - Z Index
- T
- SAP TAO
- SAP TAO 2.0
- Comprised Software Component Versions
For more information, see the installation note 1404715.
Thank You.
Regards,
Deepika

1456 the remote management agent is unable to read information from edirectory

I have novell 6.5 sp6 and Zfd 7sp1.
From consoleOne I can done the action "remote control" when the
workstation is already turn on.
I can do the "remote wakeup" but after I can't do the login. I can't see
the window novell login.
When the machine is up I have tried to do the action "remote control" but
I have this error:
1456 the remote management agent is unable to read information from
eDirectory.verify the workstation object is valid and the middle tier
server is up and running.
Into the event log I have seen this (under application):
Remote operator: cn=moni.ou=mio.o=mytree.t=tree
console address: CN=P30g-0510_1_1_1.ou=workstation.o=mytree.t=tree
invalid NDS authentication informatiom.
Please, Can sonmeone help me?
thanks for all and excuse me for my poor english I'm italian.
Regards
Monica

I have found my problem:
On my server there isn't SLP configured.
Now my problem became how to configure SLP !!!
thanks for all
Regards
Monica

Regarding the report for vendor stock

Hello all,
This is regarding the Subcontracting scenario. We have requirement of transferring the stock of material to Vendor by using 311 Q as the tye child material is in the project stock. In
However the customer would like to have a report in which we can see the stock provided to vendor ' Vendorwise or PO wise" .
Kindly suggest the solution.
Thanks & regards,
Sudhir

Hi
The stock monitoring for SC stocks at vendor can be done uswing ME2O report.
If you want to see the total stocks available at vendor then use report MBLB

Can't clear a file that keeps on dowloading from the download manager

I clicked a link (linking to a .jpeg) in an e-mail for something I purchased thinking it was an extra to the purchase, but afterwards I realised it was just an Image to accompany the e-mail.
The problem is I can't clear the download from the download manager and everytime Firefox starts it makes a connection to download the file. I tried clicking the "x" next to the download but this just paused the download. I have also tried clicking "Clear Downloads" in the download Library but this didn't help.
How can I remove this file from the download manager ?
Thank you

Hey philipp, thanks for your answer! I wasn't aware it was a bug with the beta. I voted for it to be fixed.
Thanks!

Regarding the ipv6 address handling in oracle pl/sql

Hi,
This is regarding the ipv6 address handling in pl/sql.
Can we use any c program inside the oracle as C/C++ provides more buitl in function for address handling.
Are there are any similar functions in pl/sql.
Kindly let me knoe if there is a way to calculate ipaddress masking.
Are there any system functions in oracle similar to inet_ntop/inet_pton to validate ipv6 addresses.
If not kindly let me know if there is any alternate way.
Thanks and Regards,
Anantha.

Billy Verreynne wrote:
Sven, he means converting a numeric network address to a presentation (character) address - and vice versa.Ok I understand. Validating for me had been either
a) validate that the IP address does really exist. This could have been implemented by executing some kind of ping command.
or
b) validate that the string that hold the human readable IPv6 address is correct same a as string like "[email protected]" looks like a valid email address. This of cause would be implemented with some kind of regexp expression.
However it seems he wants a conversion of the string (human readable ipv6) into a machine readable (hex) representation. Not sure why this is needed, But I agree that simply reusing the OS C routines seems to be the best way to do it.
I strongly doubt that the result is very useful in Pl/sql. So the big question (as so often) would be what is the business case behind this requirement. Maybe some part of the logic needs to be implemented outside the database anyways. Then it could be useful to add this conversion to this outside part as well.

Regarding this issue in the configuration on smsy in the solution manager

hai all,
i am havig an issue when trying to configure the smsy in the solution manager
the issue is
Invalid user s0001234567 when calling SAP Backend system
all the rfcs related to the oss is fine
i had maintained the user in the aisuser tcode correctly
and then i router is finly working
software component : st is 400 kernel and level is18
hope all the experts of solution manger help me
thanks & regards
praveen kumar

Invalid user s0001234567 when calling SAP Backend system
Is it a valid S-USER?
Use valid S-USER and update the user details in AIUSER.
Regards,
Nick Loy

Help required in finding out the tables for FS-Claims Management module

Hi All,
In FS - claims Management module, i need to find out from which tables we can fetch the following fields,
INSURED             : insured person
DESCINSURED     : Description of insured person
CLAIMANT     : person eligible for benefits
DESCCLAIMANT     : Description of insured claimant
OUTSTRES     : Outstanding reserve
PAID             : paid amount
INCURRED     : paid amount + outstanding reserve LOSSDESC     : loss description
Thanks & Regards,
Anil

Hi Anil,
I was searching for the fields you mentioned using SE15 and came up with lot of hits. I thought, it would be good if you do the same thing and you can find the relevant tables as might you have good idea in this area.
I will tell you the procedure and I hope it will give you good results.
1) Go to SE15 (Repository Info System)
2) Click on "ABAP Dictionary"
3) Click on "Fields"
4) Select "Table Fields" and enter description as "insured" on the right hand side panel with Application component as "FS"
5) Click "Execute" (F8) and you will lot of hits.
You need to search through it to find relevant tables for your purpose.
Hope this will give you an idea.
Regards,
Vicky
PS: Award points if helpful

When accessing the any tasks from Fusion Applications homepage, "An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/

We have installed HCM and CRM modules on Fusion Application 11.1.7 version.
This is 2 node architecture ie IDM components installed in one node and Fusion components installed in another node.
We are able to start the IDM components and Fusion components successfully, but when users are trying to access any task from Fusion application home page, they are getting the below error
A portlet consumer error was received for the task Manage Worker Goal Setting Lookups. Report the error details to the following owning product Goal Management.
An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF of module code fndSetup. Review the consumer and producer logs for more details on this error.

This may be related to the other issue regarding "FUSION_APPS_WSM_APPID-KEY" as the logs contains exceptions like:
oracle.wsm.policymanager.PolicyManagerException: WSM-02081 : Failed to login to perform requested action.
Please refer to document Fusion Application Service Account Password Expiration Causes Portlet Producer Errors (1486388.1) for steps on how to verify and set the password. There is also exception:
javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User FUSION_APPS_PROV_PATCH_APPID denied
This is also likely caused by an expired password, please see Fusion Apps Servers Are Not Starting Up - Password Policy Error :9000: GSL_PWDEXPIRED_EXCP :Your Password has expired (1629927.1).
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Regarding the Belkin Audio Splitter (3.5mm-M/2x3.5mm-F). Are both sides of this splitter simultaneously bidirectional?

Direct connections are always best, but if you insist:
Get a Griffin iTrip or replace your radio with one that has AUX inputs and/or Bluetooth.

This is regarding the claims management

Similar Messages

Maybe you are looking for