This is the information from my Mc on the battery. Why is not charging?
Battery Information:
Model Information:
Serial Number: W0940108A77ZA
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 3
Hardware Revision: 2
Cell Revision: 100
Charge Information:
Charge Remaining (mAh): 448
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4815
Health Information:
Cycle Count: 232
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11019
Hi...
Try Intel-based Macs: Resetting the System Management Controller (SMC)
If that doesn't help, try > Troubleshooting MagSafe adapters
Similar Messages
-
on the top right hand corner where the date and time and sound and wifi and battery symbols are, i have my battery symbole set up to show me how much battery life i have by how full the battery icon is, but how instead there is a little "x" icon int the battery symbol and i can only use my mac when the charger is connected, but it still says it isnt charging........***
I have the same problem.. X icon.. Battery indicator LEDs are not showing anything.. we might think battery is bad.. but while booting with AC adapter.. if I remove the plug.. it boots and work with battery fine.. but if I reconnect the AC adapter it goes to sleep mode or maybe just LCD shuts off.. I'm sure of it.. im suing mid 2009 version and I'm gettin a 3 1/2 hrs backup until yesterday.. I was replacing corsair RAM 8 GB one and for the battery connecter.. I use flat screw driver to lift it.. saw a tiny spark then.. thinking thats the cause of all this.. physically everything is fine.. except I need AC adapter to start the laptop.. I wonder if we'll get the exact reason of this anytime..
By the way tried everything.. SMC, NRAM.. those things etc.. nothing solves.. just learnt living with it.. -
Despite resetting the SMC, the battery still does not charge. Any quick fix here?
My MacBook Air is unable to charge the battery. Have tried resetting the SMC by pressing shift-ctrl-alt and the power at the same time and release them all at the same time. Hereafter I have pressed power on. Still it will not charge beyond 1%. Have tried an alternative power cord and adaptor for another MacBook Air from the same household, but no change here. Any quick fix ideas? My MacBook Air runs OS X Version 10.9.4. 1.4 GHz Intel Core iS, 4 GB 1600 MHz DDR3.
Sorry but it is in Danish language. Any good?
Batterioplysninger:
Modeloplysninger:
Serienummer: C014311007QF90LAP
Producent: DP
Enhedsnavn: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware-version: 511
Hardwarerevision: 000a
Cellerevision: 1210
Oplysninger om batterispænding:
Resterende kapacitet (mAh): 38
Fuldt opladt: Nej
Oplader: Nej
Fuld ladekapacitet (mAh): 7504
Oplysninger om batteritilstand:
Antal cykler: 3
Betingelse: Normal
Batteri installeret: Ja
Strømstyrke (mA): 0
Spænding (mV): 7107
Energiindstillinger til system:
AC-strømforsyning:
Interval for vågeblus for system (minutter): 1
Interval for vågeblus for disk (minutter): 10
Interval for vågeblus for skærm (minutter): 10
Afbryd vågeblus ved ændret spændingskilde: Nej
Afbryd vågeblus, når skærmen slås op: Ja
Afbryd vågeblus via LAN: Ja
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
Aktuel strømkilde: Ja
DarkWakeBackgroundTasks: 1
Vågeblus dæmper lysstyrken: Ja
PrioritizeNetworkReachabilityOverSleep: 0
Standby Delay: 10800
Standby Enabled: 1
Batteri:
Interval for vågeblus for system (minutter): 1
Interval for vågeblus for disk (minutter): 10
Interval for vågeblus for skærm (minutter): 2
Afbryd vågeblus ved ændret spændingskilde: Nej
Afbryd vågeblus, når skærmen slås op: Ja
AutoPowerOff Delay: 14400
AutoPowerOff Enabled: 1
DarkWakeBackgroundTasks: 0
Vågeblus dæmper lysstyrken: Ja
Formindsk lysstyrke: Ja
Standby Delay: 10800
Standby Enabled: 1
Hardwarekonfiguration:
UPS installeret: Nej
Oplysninger om oplader:
Tilsluttet: Ja
Id: 0x07a1
Watt (W): 45
Familie: 0x0085
Serienummer: 0x00f18097
Oplader: Nej -
The battery icon says "Not Charging" and the light on the charger isn't lighting up either?
I fell while my macbook was in my bag. It was already dead but when I went to put the charger in it wouldn't light up. To my surprise it still turned on but it said "(Not Charging)". I unplugged it multiple times and reset the PRAM and everything and it's still the same. It's as if I always need my macbook to be plugged in for it to work and not charge at all. Is it the internal battery? What else could I possibly do to resolve the issue?
Battery Information:
Model Information:
Serial Number: W0013U00WE1LA
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 000a
Cell Revision: 0165
Charge Information:
Charge remaining (mAh): 12
Fully charged: No
Charging: No
Full charge capacity (mAh): 4505
Health Information:
Cycle count: 759
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11036Try taking the battery out and looking at it. If you don't see any visible damage, put it back in and see if taking it out fixed the problem.
-
please help me.. i m stressed out
http://support.apple.com/kb/ht3964
There are links on this page to take you to your specific model of MBP - removable battery or no removable battery. -
I am really disapointed with my MacBook Air. I bought it around two years ago and every three months I need to do something to fix it. First was my source, it did not work and need to buy a new one after searched in 5 shops in Brasília/ Brazil. After this was the screen, full of waves and dark spots. Next was the keyboard which went out of order and I need to change by a new one (20 days waiting for the service in Goiânia/Brazil). Now was the battery, which is not charging! And the support told me to change and more 20 days waiting for the repair. When I bought my first Mac I really think that I never have so many problems. Anyone has the same issues?
Best
JanineYour dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you. -
My battery is not charging but from About This Mac the battery seems good condition. I had tried resetting smc but not working too. What can I do?
Please help.
Battery Information:
Model Information:
Serial Number: W0017PM0LBX0A
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 000a
Cell Revision: 0157
Charge Information:
Charge remaining (mAh): 53
Fully charged: No
Charging: No
Full charge capacity (mAh): 5845
Health Information:
Cycle count: 257
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 10961
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00c0a8ba
Charging: NoHi all,
I tried a different charger myself (the power source is reliable). But it does not work too. I think I need to bring it down to apple shop.
But is quite disappointing with the new apple product I have. Cos not only my battery is not charging, my built in speaker, the sound is like broken too. So I can hear some noisy sound when I play music.
I have a power book G4, and the power book, everything is still in good condition. Imagine how many yrs I have with the power book G4. This power book I never bring to do any services before. I sometimes really suspect is it Apple drop quality
(cos the office new bought mac from my boss, the USB port is not working too..)
But thanks all for the reply I think I need to bring it down to apple shop. Thanks! -
There was an error storing your authorization information on this computer.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
I'd try the following document with that one:
iTunes: Missing folder or incorrect permissions may prevent authorization -
My Iphone 4 crashed and I lost my entire contact list. I restored it to original factory settings but in trying to restore my data from my laptop via Itunes.. this was the feedback: Itunes could not restore the Iphone Dr Johnny Siu Chong because the Iphone refused the request.
I cannot get help from Apple support because i am being asked to supply the serial number which is stored on the phone and I cannot restore my data in the first place. I am reluctant to "Set up as a new Iphone" since I don't know whether if I do I may not then be able to access my data from Itunes...
Please advise what to do. I did not see any tutorials on Youtube to help me with this.
I look forward to an early response.Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
Hi All, I bought a re-furbished Lenovo X220i and decided to buy an extra genuine Lenovo battery which is brand new (New Old Stock maybe?) from a dealer. Battery Details: P/N OA36283 on the Box. P/N 42T4861 on the battery. According to the Lenovo documentation, this battery part number should be compatible to Lenovo X220i. However, when I insert the battery in, it comes up with a message that the battery is not supported by the system and will not charge. The battery comes up with zero (0%) charge. I installed the latest driver I can find and still comes up the same. Can anybody shed some light on this please? Thanks.
Hi
can you provide the photo of the labels on the battery surface (with quality the symbols legible)? Also, if OS is win7 and Lenovo Power Manager application is installed, it's very helpful to add information PM in the Advinced mode from the Battery tab.
There is a big chance the battery is faked. -
When I sync recently bought albums to my iPhone I get duplicated tracks. How can I resolve this. The duplicated tracks do not appear in my itunes library, just on my iPhone.
It seems to happen with songs that were purchased before synchronizing the new iPhone
I will tell you how I fixed it.
Note: I have iTunes in spanish so I will try to translate and figure out the commands that appear on ITunes in english. I will put my translations into brackets. English is not my native language. I will do my best.
The workaround is:
1.- Dragg no working songs from iTunes to a folder on the hard disk. (Only for backup purposes)
2.- Deleted those songs from iTunes library.
3.- On the left panel in ITunes click on "Purchased" under the STORE option. All your purchased songs will appear on the right panel
4.- At the bottom and right there is the option : "Download Previous Purchases". Click there.
5.- Click on the option "Are not in my Library" (top right)
6.- The songs you deleted from iTunes will appear.
7.- Downloaded them again. (You have the option to download at the bottom right)
8.- Syncronize your iPhone and that's all. -
When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?
iTunes: Missing folder or incorrect permissions may prevent authorization
Mac OS X
Log in to your computer using an administrator account.
In the Finder, choose Go to Folder from the Go menu.
Type: "/Users" (without quotes) and click Go.
If the Shared folder exists
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod -R 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod -R 1777 /Users/Shared
Press Return.
Quit Terminal.
If the Shared folder does not exist
The following steps will recreate the Shared folder if it is missing and ensure that it has been assigned using the correct permissions.
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Type or copy and paste the following command into the Terminal window:sudo mkdir -p /Users/Shared/
Press Return.
Enter your administrator account password when prompted, then press Return.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod 1777 /Users/Shared
Press Return.
Quit Terminal. -
i cant restore my iphone and it kept on giving me this infor 'the iPhone 'iPhone' could not be restored. An unknown error occurred[1015]
It's 99% sure theat the iPhone was hacked/jailbroken to use another carrier or downgrading IOS. There's no help with this.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
Message was edited by: ckuan -
Why do I get this message: The song "title" could not be used because the oringinal file could not be found. Would you like to locate it?
John Black3 wrote:
Many of my songs in my iTunes Library no longer play. I get this error message: "The song xxx could not be used because the original file could not be found. Would you like to locate it?
this usually happens when a user moves or deletes files in the finder - a sure way to upset iTunes.
did you move or delete files in the finder ?
I cannot locate the song.
if you let iTunes manage your library, all your content will be in <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)/music. did you look there ? tried a spotlight search ?
if the files are really gone, and have been purchased from the iTunes store, see Downloading past purchases from the App Store, iBookstore, and iTunes Store. -
My Ipad2 just shuts down and will not turn on. Rebooting does not help. He switched on when I start charging it. In this case, the battery is charged.
Standard troubleshooting steps in the following order:
1. Reset: Press the sleep/wake button & home button at the same time, keep pressing until you see the apple logo, then release. Ignore the slide to power off.
If no change, continue:
2. Restore your phone from a backup, note: if the problem is related to corrupt data, while this will restore a fresh OS, it will also restore the problem.
If no change, continue:
3. Restore as a "new" phone in itunes & re-sync your content. All saved data will be lost.
If no change, make an appointment at an Apple store. -
After the Aperture update this week, the app still will not open!!!!!!
If you want us to be able to help, we will need a little bit more information.
What exactly happens, when you try?
Do you get an error message, if yes, what is the message?
Does Aperture hang or crash? If it is crashing, post the crash log here - copy and paste the first 60 lines of the crash log into your post, not a screenshot please.
Regards
Léonie
Maybe you are looking for
-
Dimension with 2 Hierarchies, Lowest Member w/ Different Long Descriptions
I'm trying to create a dimension that would allow Discoverer For OLAP users to choose between different LONG DESCRIPTIONs, and I am trying to accomplish this by using multiple hierarchies. For example, when a user is trying to create a report and eve
-
Looking for external Lightscribe DVD burner drive
Does anyone have experience or a suggestion for an EXternal Lightscibe compliant DVD burner for Windows 8.1?
-
I can see it is available in other languages already (since 2011/09/29): Greek - ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.1/el_GR/ - MSI and EXE Arabic - ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.1/ar_AE/- MSI and EXE Hebrew - ftp:
-
Not getting Report Model Query Designer in SSRS
I am working on SQL Server reporting Service(SSRS) with Report Builder 3. I successfully connected Data Source with Oracle Server. When I working in Report Builder I did not find Report Model Query Designer. How can I find this? How can it possible t
-
HT4489 how to import Contacts in iCloud from Exchange?
how to import Contacts in iCloud from Exchange?