This is truly newbie question

I am totally unfamiliar with spreadsheets, but like the idea of a table and started to use Numbers to create a timeline, with dates in column A, Events in column B and people in column C. However if I add a row by selecting the top date in A and choosing to add a row, then I indeed have a row in A, but all the other columns don't have a new row. Is there some way I can lock the rows together and then add a new row to all of them. I want all the information to stay together as things are moved.
If I choose to sort the table descending or ascending all the rows stay together as I was expecting, but not when I add a row.
Help.

Pamela Mullen2 wrote:
I did as the last person said: selected a cell in Column A (by clicking in it), choosing Table in the menu bar and selecting Add Row above. Indeed it added a row above, but only in Column A, thus moving Column A down a bit so that the rows do not line up as before.
Pamela,
What you are describing is not normal Numbers behavior, in fact it's not possible in a properly functioning document. It could be, I suppose, that the document is corrupted and behaving irregularly.
Unless you particularly enjoy adversity, I think your best course of action would be to abandon that document and paste your content into a fresh document, testing from time to time to see if the problem has returned.
Jerry

Similar Messages

The Move Tool ? Is it working right in this example? newbie question

I'm new to photoshop. I'm trying the 30 day trial. I am doing the 2nd lesson from the book, Adobe Photoshop CS4 by Adobe. Its the lesson with the "Pitch In" post card where you type some text on the picture with the horizontal text tool.(Lesson 01, "01B_Start.psd")
Then the book directs you to use the move tool to move the text to the sandy area of the picture. I followed each step meticulously, but after I move the text, it continues to be selected (quivering) and the original text stays where it was originally typed, leaving two separate lines of text.
The book shows in its example, the text *moves*. On my machine, it appears that it just copies the text rather than moves it. What am I doing wrong or is there something wrong with CS4 as I've read a lot of bad things about it being buggy.
RK

This is the WORST software program I've ever encountered!
It doesn't do anything the way the book describes.
Book next states on page 24:
"The text color in your image is the same as the foreground color.... You'll color the text by selecting it and then choosing another color.
1. In the Tools panel, select the Horizontal Type tool. [I did]
2. Drag the Horizontal Type tool across the text to select all the words. [It then shows a picture of hightlighted/selected text similiar to many other text editing software which you select in that fashion. I try it but it will not work.] It then states:
3. In the Color panel group, click the Swatches table to bring that panel forward.
4. Select any swatch. The color you select appears in three places: as the foreground color in the Tools panel, in the text color swatch in the option bar, and in the text you typed in the image window...
That's how easy it is to select a color in Photoshop. "
HA!! Easy my foot! Yeah, it'd be easy if the program worked!
NONE of that works! If you follow those steps, the text is not highlighted, but instead the horizontal text tool draws a text box! No way that I can find to select and highlight that text to change its color. And as I stated in previous post, the original text that I "moved" is still there - not moved, but copied! The text will not change color.
This program is krap! I'd be really ticked off if I had bought it. As it is I need to try to return the book I wasted $35 on!!
RK

Multiple version of JRE in company..How to manage? (newbie question)

Greetings..this is a newbie question
We have 48 versions of JRE running in on XP IE6 in our company.
Some version beat up other JAVA applications.
It's a mess.
How can anyone manage this many versions?
Can we consolidate down to a few versions?
I saw some posts on changing the JRE dynamically or perhaps using a wrapper with a product from "sourceforge".
Are these viable?
Thanks in advance

We have 48 versions of JRE running in on XP IE6 in
our company.
Some version beat up other JAVA applications.
It's a mess.can you elaborate on how some versions "beat up" other apps?
How can anyone manage this many versions?you don't, each computer should periodically upgrade (IMO) but you shouldn't care. if you do, tell your users to load the latest version
Can we consolidate down to a few versions?sure
I saw some posts on changing the JRE dynamically or
perhaps using a wrapper with a product from
"sourceforge".
Are these viable?i have no idea what this is, but I have doubts about your problem, if it exists at all

Total Newbie Question ... Sorry :-(

I know it's a windows thing, and I am now converted to Mac but I gotta know this because it's doing my head in. It's a complete stupid green gilled newbie question.
When installing new programs on a Mac can you create shortcuts to the programs on the Dock? I did what I THOUGHT it would be, i.e I made an Alias and stuck it in the dock, but on rebooting my Mac later on, in place of the shortcuts where 3 question marks which when clicked on did absolutely nothing???
Help?
A.L.I
Windows XP Pro Desktop, Macbook Pro, 60GB iPod Video Mac OS X (10.4.5) OS X

You aren't installing something from a dmg file are you? The dmg is a disk image – kind of a virtual CD. So when you double click the dmg and then get the little disk/hardrive/custom icon on your desktop that is the same as if you had mounted a CD. You then need to drag the application off of that "CD" into your application folder. Then it is truly installed.
You can then "eject" the icon your your desktop. This is what happens when you shutdown and without remounting the image your dock shortcut can't find the original.
Just a thought.

Newbie Question. just installed IE7.. how do I set up a local host to preview sites?

Sorry for the newbie question... but it's been a long time since I have done this
Thanks!

Just define your site in DW as always. For a static site, that's all you need to do.

Domain name settings - Newbie question

Sorry for a newbie question!
I am already pointing a domain name to web hosting for email account. Now, I need an application server to run ERP software and Oracle, and installing Solaris and Oracle need a domain name.
If I point my domain name to the server, how do I receive emails from web hosting???
Install an email server to the application server instead? What can I do if I want the same domain name? Any option?

Setting up a mailserver and making sure it doesn't suddenly turn into a spambox is not something you do with the use of a few commands. I suggest to dive into the Solaris admin guide on docs.sun.com and read up on e-mail and network services.
If that is asking too much of your time you'll be better off getting your ISP to handle all this for you.

Newbie Question: How much computer do I need?

Newbie Question:
I would like to use MainStage 3 in a live performance environment to play bars, parties, etc. I'm not looping, using it to playback recordings, processing outboard equipment or vocal processing. I want to stop carrying Rolands, Nords, Korgs, etc and get to a controller and a rack with a Mac Mini in it.
I tested a download of Mainstage 3 on my home Mac Mini (late 2012, 3.5 Ghz i5, 4GB RAM, 500GB drive) and it seemed to run fairly well. $30 well invested so I trekked forward... I purchased a Mac Mini (late 2009, 2.52GHz Core 2 Duo, 6GB RAM, 128GB SSD) for $200. I started to do more elaborate keyboard setups to see how the CPU would hold up. It typically runs from 30% to 50% of capacity (CPU and Memory) It actually boots and runs better than the i5. I hear the occasion gitch, but it actually seems to be getting better in time (or I'm rock and roll deaf.
I got a rack, an Airport Express, a Radial USB interface and a Nektar Panorama P6. It's starting to get expensive, but I'm emboldened by the actual quality for the sound and the flexibility of arranging for live performance. What used to take me two and three keyboards to play, I can now fit on one performance patch.
OK, now the question... am I at the limits of this little Core 2 Duo? Should I upgrade the i5 with more RAM and a bigger SSD and use that? Should I get a new(er) i7 and bite the $1,500 bullet for the additional RAM and SSD?
I see that most of you are running pretty nice Macbook Pros with i7 and lots of everything. My needs are modest; am I OK?
BTW, I want to run a Mac Mini in a box because I don't want to carry a laptop out in the open. If I was doing bigger shows I wouldn't care but I play some rowdy bars and constantly have folks hanging off me while I'm playing. It's fun, but hard on gear. If you can't drop it or dip it in beer, it won't last long where I work.
Matt Donnelly

Rule of thumb: newer and faster is better. But, depending the complexity of your needs you may be OK with an older Mac. Some glitches that happen in a live performance are due to loss of communication with USB or Firewire inputs, so make sure they're secure. I recently upgraded from a 2010 Mac Mini 2.6 dual core with 16 GB RAM, which was used live for nearly four years, to the latest Mac Mini 3.0 i7 with 16 GB RAM and a 500 GB SSD. I was getting an occasional stuck note with the older one. The new one is rock solid. Some of my patches may have up to a dozen channel strips mapped to three keyboards. The Mini is mounted in a rack next to a MOTU Ultralite Hybrid. It is a good idea to map a panic button on your keyboard to controller # 123(all notes off). Also, you might want to invest in a battery backup power supply(APC, Cyberpower, etc.-$40-$60) to protect your Mac against power loss, which can damage you hard drive.

Newbie question - XML version, searching by artist

Probably quite a common problems - apologies for newbie questions.
I've changed the URL of my MP3s in my XML to a new location and refreshed my feed. Is there a way of seeing what version of the XML iTunes is using? (it takes around 24 housr to refresh, right?)
Also, when I'm searching for my podcast by author it's not coming up (<channel><itunes:author>) - is there a reason for this or a way to get it to show up when people search for the artist, other than doubling it in the title? (This works by the way, but I'd prefer not to!)
Thanks.

you can do it in just one loop, going through all the image
tags in index_content and for each tag fill the values of all four
arrays
for (i...) {
get the appropriate child of index_content
first_array[ i ] = value of first tag
second_array[ i ] = value of second tag
no need for multiple loops.
flash has functionality for xml files, but it helps to write
a little wrapper around it, to simplify programming, especially if
you work with xml a lot.. I wrote my for work, so I can't show it
to you, but it's not very complicated to do

Newbie question: ""dynamic"" casting

Hello all,
 
I have a quite newbie question. I have this class hierarcy:
 
A
|_A1
|_A2
|_A3
|_A4
|_A5
|_.....
 
in some part of my code I have this:
 
if (object1 instanceof A){
if (object1 instanceof A1) {A1 object2 = (A1) e;}
 if (object1 instanceof A2) {A2 object2 = (A2) e;}
 if (object1 instanceof A3) {A3 object2 = (A3) e;}
 if (object1 instanceof A4) {A4 object2 = (A4) e;}
 if (object1 instanceof A5) {A5 object2 = (A5) e;}
object2.callMethod();
 
Is there any way to do this type of casting just in one line? I mean, I just want to cast object1 to the class it is instanceof. If it is instance of A1, I want to be casted to A1, if it is A2 to A2, etc...
 
Thanks you in advance.

kamikaze04 wrote:
In fact I know what object1 is on execution time,Which doesn't help your compiler at all, when it's task to link and verify method calls.
because the code posted at the top is working well, i just want to avoid repeating that if's for all the new classes Ax I will create. Big "code smell" here.
In other words if i had from A1 to A200 i dont want to have 200 if's to cast it to the class it is and then execute it's method.You could call the method "doMagic()" and make it abstract in A. Then you can implement it in all Ax classes and would never have to worry about casting in the first place, because A.doMagic() would automagically do the right thing. Polymorphism.

Newbie question about saving files

Hi all,
A newbie question here, and maybe it is a dumb question, but I can't get my head around this and sofar found no answer in the forums here.
When I save a file on my macbook, I can only save it to "top" folders.
What I mean is I try to save a file for instance to documents/worddocs/lyrics just to say something, then I have to save the file first to documents, and the move it to the lyrics folder via finder or move it to :worddocs folder and then move it again to the lyrics folder. Hope you still get my drift here
Is there a way to just save it to the subfolders without going through all this moving around?
Thanks in advance for any advice
Peter

When you click File>Save As, you will see the Save As window pop up. At the top, you will see a box entitled Save As, which has a space for your to enter the file name. To the right of this box is an arrow pointing down. Click it. The full file hierarchy will be seen. Then you can save directly to the file you want.
Hope this helps.
Don

WebDynPro Newb question

Hey All,
I need to begin working with WebDynPro. I have a couple of Newb questions:
1) I need to jump right in fairly quickly, so can anyone suggest any good documentation that could help me get the basics down about working with WebDynPro?
2) I loaded a Sample WebDynPro project into NetWeaverDev Studio, but I am unable to export this to our instance of EP on our Development Server. For a .par file its easy to do exports, but I can't for the life of me find where i go in NetWeaverDev Studio to do an export of a WebDynPro project. When I goto export in the WebDynPro perspective, it appears to only want to allow me to export locally, but I need to push to a different server. Can anyone help me with this?
I appreciate any advice and suggestions. Thanks All!!
Take care,
-Kevin

Hey Rich,
I have the Engine setup, but I do not get prompted for the SDM password, do I need to configure that somewhere? I get the following error when trying to deploy:
Jul 15, 2005 10:13:17 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[004]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
Thanks,
-Kevin

Newb Question for burning DVD/CDs

I have an external DVD writer on my iMac.
I got the thing last month and an completely new to Apple (sorta)
Now how do I make a data CD and DVD?
On Winblows XP all I need to do is select the files, right click and click on SEND FILES TO CD for making data CDs.
However for DVD I need 3rd party software.
Will iDVD do the trick?
Thanks for the looking at this simple newb question.
GeekyBoy

Now how do I make a data CD and
DVD?Drag the files to the icon of the
blank CD/DVD that appears in the
Finder.However for DVD I need 3rd party
software.You might want to try Patc
hBurn.Will iDVD do the
trick?No, iDVD is only for making video
DVDs and it requires a G4 processor.
Thanks for the tip Duane.
I was just reading abotu burning CD on another site. It mentions about what you said, drag the files to the CD.
However I am reading in my profiler that burning is NOT supported by OS X on this CD/DVD writer.
Will Patchburn or any other software overcome this?
Thanks

InDesign or Acrobat (newbie question)

Hi,
I tried posting this in the LiveCycle Designer forum, but I think it's a bit too much of a newbie question:
Once in a blue moon when I'm at work, someone will ask me if I can add text fields to a PDF form so that they can easily type onto it and print it out. I've always done that directly in Acrobat (on the few occasions that it's been requested from me). But I was curious about Adobe LiveCycle since it came with CS3, so I played around with it a couple of days ago. I added the text fields in LiveCycle this time, and it seems to have worked fine. Which is the better program for this kind of task? I'm not 100% clear on the *main* purposes of either program or how they compare. If anyone wanted to give me a clue about it, I'd appreciate it!
Thanks,
Phyllis

> I thought perhaps you could add that capability
You can (I said I was oversimplifying). However there are contractual
limits - to oversimplify (!) 500 users per form.
>Which would be preferable -- receiving form data from LiveCycle or Acrobat?
It depends what you want to do.
>
>I wish I knew what the difference was between these two programs. Is it purely a matter of emphasis on one task or another?
They come to the same problem in different ways. For a simple task
they may seem pretty much the same. Some differences:
* A form made in Acrobat is a PDF with form fields stuck on top; it
remains a normal PDF in every other way. Forms are almost always made
by preparing an existing PDF, then adding form fields.
* A form made in Designer is barely a PDF. It's a wrapper round an XML
file. You can no longer edit it in Acrobat, ever, even for the most
simple things. PDF files are imported and converted (sometimes with
loss of quality or features), or forms are made from scratch.
* Acrobat form fields are fixed size.
* Designer form layout can be dynamic.
Aandi Inston

Vector file - newb question

After reading the user manual, I still don't understand how this works. Let's say I use Adobe Illustrator to draw a picture of sayyyyyyyy.......a kitty. Is there any possible way to take my kitty picture, export it out of illustrator as a vector file and import it into Motion so that motion can scale that image more or less indefinitely and maintain the crystal clear image no matter what the size. Like, can I zoom in on kitty's eyeball in Motion and still have the image look good?
Sorry for the newbie question but I just have not worked with vector images much. Thanks for any help.

The answer is yes. All you do is save the file as .ai or .pdf, bring it into Motion, and turn off fixed resolution for the underlying media (import the file to the Canvas, select it in the Media tab of the Project Pane, select the Media tab of the Inspector, and uncheck Fixed Resolution). You can now scale it as large as you wish with no loss of resolution.

First full Time Capsule Backup Newbie Question

I'm most likely going to get a lot of crap for this newbie question but here it goes. When I setup my time capsule for the first time I want to backup it up hardwired to my IMac how do i do that. What are the steps involved I'm sure it's pretty simple plug the power cable in and connect the ethernet cable but then what. Thanks for your help all that reply

Depends on how you want to setup your future wireless network. Just follow the TC Setup Guide. If there is a problem during setup, repost.
Here are some links to get you started:
[http://manuals.info.apple.com/en/TimeCapsule_SetupGuide.pdf]
[http://support.apple.com/kb/HT1178]
[http://support.apple.com/kb/HT1175]

This is truly newbie question

Similar Messages

Maybe you are looking for