This log in user does not have proper rights to use WebCenter Capture

Hi experts,
We have WCI 11.1.1.8.0 setup. It has WEC configured. However when I login with "weblogic" user. This is domain admin user. WEC allows user to login and shows top navigation bar. However in the body it shows below message
"This log in user does not have proper rights to use WebCenter Capture"
I am sure i have not gives a proper group/ role to this user. I am not sure which one is that.
Regards,
Vikrant Korde.

Hi Vikrant,
This happens if user is not in Capture Application Role.
Check this:
Log in to EM
Right-click the capture_domain, select Security, and then Application Roles
In the Application Stripe field, select capture, and then click the Search application roles icon to display the Capture application roles.
In the Capture User add this weblogic.
It will work now.

Similar Messages

  • 'The logged-on user does not have permission to use this object'

    Hello everyone,
    I am getting the message 'The logged-on user does not have permission to use this object' while saving the Sales Order. I am logging in as a CRM user. There is an addon also running on the server, that saves some data into a user defined table when the Sales Order is saved. Is there any authoisation for users to access user defined tables.
    Regards,
    William

    hi William,
    this is an Authorization issue. provide the user with authorization on your UDT. Definition of user authorization can be found in Administration -- >> System Initialization -->> Authorizations -->> Additional Authorization Creator.... if already defined from here you can fined the additional authorization from the General authorization window.
    regards,
    Fidel

  • The logged in user does not have permissions to perform this operation

    OIM 11.1.2.0.4
    Connector: Microsoft Active Directory User Management 11.1.1.5.0
    Action: revoke a provisioned AD account (logged in user is XELSYSADM member of SYSTEM ADMINISTRATIONS role)
    Error message: IAM-2050243 : Orchestration process with id 5756, failed with error message IAM-4065011 : An error occurred in oracle.iam.provisioning.spi.DOBProvisioningMechanism/revoke(Account) while revoking account with id 1 for the user with key 43 and the cause of error is The logged in user does not have permissions to perform this operation..

    The problem is missing entries into table AAD, Provisioning API uses table AAD to check administrator's scope on the user's organization.
    TEST: following SQL statement should return at least a value
    select aad_write, aad_delete
    from aad aad
    , usr usr
    where aad.act_key = usr.act_key
    and usr.usr_key = <user_key_of_user_you_wanto_to_revoke>
    and aad.ugp_key in (
    select ugp.ugp_key
    from ugp ugp
    , usg usg
    where ugp.ugp_key = usg.ugp_key
    and usg.usr_key = <user_key_of_xelsysadm>
    BUG (in my case): if you create an Organization using a OIM user that does not have any Role (except default ALL USERS Role) the system does NOT add right entries into AAD table, so you can revoke account of users that are members of this Organization
    WORKAROUND: manually insert entries for all Organizations (ACT_KEYs) for the user XELSYSADM into AAD table
    FIX: always create an Organization using a OIM users with at least one Role except ALL USERS role

  • ADDM Report is not produced by SQL DEV 4.0 if logged in user does not have SYSDBA privilege

    Hello -
    In SQLDEV 4.0 (Early Adapter), I logged in as user with no SYSDBA privilege granted. But ADVISOR granted and  execute on DBMS_ADDM granted and "select any dictionary" granted, etc.
    Then i go to the menu View --> DBA --> Performance --> Automatic Database Diagnostic Monitor
    Select ADDM report from the available choices.
    Out of 3 menu options: Summary, Findings and ADDM Report, I can see the first two, but I am getting a grey screen for ADDM Report.
    ^^^^^^^^^^^^^^^^^^^^^
    If i do exactly the same but login as SYSDBA, then ADDM Report can be produced and can be seen. So the issue is in the missing grants and privileges.
    ^^^^^^^^^^^^^^^^^^^^^^
    The goal that we are pursuing in our shop is to empower developers to work with ADDM reports by having them login as non-SYSDBA user.
    ^^^^^^^^^^^^^^^^^^^^^^^^
    Please advise what privilege should be granted to get this working for non-SYSDBA login
    The same user can successfully execute $ORACLE_HOME/rdbms/admin/addmrpt.sql and produce file with complete ADDM report. But not able to get the ADDM from SQL DEV 4.0
    Thank you,
    vr

    Thank you, Phil.
    This worked for me in my quick test case.
    Great help, as DBA group wants to allow NON-privileged users (like Developers and QA) to execute ADDM on demand.
    Here is my observation for RAC database with two instances.
    I have followed your instructions:
    "Performance / Automatic Database Diagnostic Monitor -> Run ADDM"
    Then
    - Uncheck box "By Creating New Snapshot" (this box was checked by default)
    - Provide new "Task Name" (let's say "vr1")
    - Select "Start Snapshot" (this is where my first confusion is: each screen shot # is shown twice, may be because i have two instances of RAC)
    - Select "End Snapshot" (the same way: each SNAP_ID is shown twice)
    - and finally APPLY button is pressed
    This creates 3 reports:
    vr1
    vr1$1 (for instance_id=1)
    vr1$2 (for instance_id=2_
    So, my question is: this expected and normal behavior of the tool?
    What if my RAC database has 8 instances? Then I would generate 9 separate ADDM reports?
    Is this correct observation?
    Thank you,
    vr

  • ADDM Report is not produced if logged in user does not have SYSDBA privilege

    Hello -
    In SQLDEV 4.0 (Early Adapter), I logged in as user with no SYSDBA privilege granted. But ADVISOR granted and  execute on DBMS_ADDM granted and "select any dictionary" granted, etc.
    Then i go to the menu View --> DBA --> Performance --> Automatic Database Diagnostic Monitor
    Select ADDM report from the available choices.
    Out of 3 menu options: Summary, Findings and ADDM Report, I can see the first two, but I am getting a grey screen for ADDM Report.
    ^^^^^^^^^^^^^^^^^^^^^
    If i do exactly the same but login as SYSDBA, then ADDM Report can be produced and can be seen. So the issue is in the missing grants and privileges.
    ^^^^^^^^^^^^^^^^^^^^^^
    The goal that we are pursuing in our shop is to empower developers to work with ADDM reports by having them login as non-SYSDBA user.
    ^^^^^^^^^^^^^^^^^^^^^^^^
    Please advise what privilege should be granted to get this working for non-SYSDBA login
    Thank you,
    vr

    Thank you, Phil.
    This worked for me in my quick test case.
    Great help, as DBA group wants to allow NON-privileged users (like Developers and QA) to execute ADDM on demand.
    Here is my observation for RAC database with two instances.
    I have followed your instructions:
    "Performance / Automatic Database Diagnostic Monitor -> Run ADDM"
    Then
    - Uncheck box "By Creating New Snapshot" (this box was checked by default)
    - Provide new "Task Name" (let's say "vr1")
    - Select "Start Snapshot" (this is where my first confusion is: each screen shot # is shown twice, may be because i have two instances of RAC)
    - Select "End Snapshot" (the same way: each SNAP_ID is shown twice)
    - and finally APPLY button is pressed
    This creates 3 reports:
    vr1
    vr1$1 (for instance_id=1)
    vr1$2 (for instance_id=2_
    So, my question is: this expected and normal behavior of the tool?
    What if my RAC database has 8 instances? Then I would generate 9 separate ADDM reports?
    Is this correct observation?
    Thank you,
    vr

  • User does not have the propoer permissions to setup Networks

    Hi all,
    I was happily setting up networks and watching them be created in CPO from SE 3.01 Setup Wizard only to go back later and realize that a Cloud Portal Cancel Service Request had basically removed them all approximately 3 minutes after I had set them up!!!!
    It seems the user I was using didn’t have the correct authority to do this operation. See below…………
    System (External) on 08/03/2012 3:10 PM "[NT AUTHORITY\SYSTEM (03/08/2012 16:10:53) - Service request cancelled due to an error.
    Error Code: 1009
    Error Description: The remote server returned an error: (401) Unauthorized.
    User does not have proper authentication.
    Automation Summary URL: \\CPO-DEV-01.uktme.cisco.com\AutomationSummaries\20120803\9ca]"
    System (External) on 08/03/2012 3:10 PM "[TEO change request 'Add Network' was marked canceled by 'NT AUTHORITY\SYSTEM'.]"
    The interesting thing is that I am using the cloud admin setup in the wizard who belongs in the Cloud Provider OU and this OU seems to have all the correct setting ( I checked with a parallel working system) but it was missing the nsAPI user in the OU so I added this.
    One further clue is the I suspect steps 1 + 2 when using the wizard didn’t have connectivity from CCP to CPO at the time as the authentication wasn’t setup correctly but I though these step were REX internal to CCP only so this and CCP to CPO connectivity didn’t matter too much. Regardless we fixed this connectivity at this stage to proceed to step 3.
    Now I suspect in step 1 & 2 sets up some user accounts in CPO for these operations and I am nervous about going back and deleting the Cloud Admin account as I seem to remember another thread about this stating it was not possible.
    Any thoughts experts please?
    Cheers

    Hello Michael,
    I have spent the whole day on the same problem then you, which forced me to check all the aspects of my 3.0.1 Starter Edition Lab installation :
    - nsapiuser declaration in the CPO logins
    - nsapiuser member or not of the Cloud Technical administrators (thank you, chaotic documentation...)
    - IIS authentication mechanisms for RequestCenter virtual folder (disabled by default in IIS 7.5)
    But none of them solved the error.
    The closest information I get (I suppose) is from the CPO activities view, where I finally touched the process that fails:
    I did not found the solution yet, but I am sure it is there that the Portal fails to authenticate the data from the Orchestrator.
    Best regards,
    David

  • Error Loged On user does not have permission to use this object

    Hi all,
    I am trying to Export Document Data in XML format
    for OSalesinvoice or oPurchaseInovice object it is working fine
      But if i use oPurchaseTaxInvoice it is giving error
    "An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in myDUAPI.exe "
    "Additional information: The Loged On user does not have permission to use this object"
    I have logged as "manger" "manager"
    Dim oInv As SAPbobsCOM.Documents
            'oInv = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
            'oInv = vCmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseInvoices)
            oInv = vCmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseTaxInvoice)
            If oInv.GetByKey("9") Then
                oInv.SaveXML("C:\downloads\purinvtax.xml")
            Else
                MessageBox.Show("couldn't find it")
            End If

    Hi Sudish,
    It looks to me that the logged on user is only a CRM user. You need to have a professional user license to access Invoices.
    If you're using only the DI API, please check which user name you are using to connect to DI. If you're using UI API with single sign on, the logged on user to SBO is not a professional user or don't have the correct authorisation.
    Hope it helps,
    Adele

  • "The Loged On user does not have permission to use this object" error

    Hi
    I've created a form that is used by a customer which allows for certain draft documents to be approved and then once approved they are created. The problem that I am having is that when the users attempt to update the changes on the form an error is logged, which is shown below:
    "Error: -3000
    The Loged On user does not have permission to use this object
    System.Runtime.InteropServices.COMException (0xFFFFF448): The Loged On user does not have permission to use this object"
    Once the update button is pressed then a User Defined Table and Drafts are both updated with the relevant modified UDFs from the form.
    If I log onto their system then I don't seem to get any issues. To me it looks like a user authorisation problem but the ones who have used the form seem to have the relevant licences.
    Do you have any idea why this error could be occuring?
    Thanks a lot.
    Steve

    Hi,
    Go to Administration --> System Initlization > Authorizations> General Authorizations not expand all and check if the service call is given full *Read & Write * rights to the required user.
    If not then give full rights and check the add on.
    Hope it helps,
    Vasu Natari.

  • The loged on user does not have permission to use this object'

    A professional license user currently has Authorisation to all Customer BPs and Sales Documents.
    When creating a random Sales Order, the error message
    'Create POs(): The loged on user does not have permission to use this object'
    is occuring.  This is not occuring for all Sales Orders, this is occuring randomly.
    Note that the Purchase Orders Button in the Logsitics tab in the sales order is NOT selected.
    Cheers Lisa

    hi lisa
    there could be some changes in transaction notification from your side if there are any i would request you to please comment all the changes and then try saving the document it would definately go ahead as there has to be some change in the stored procedure ,
    Regards,
    Manish

  • Error Message' "The loged on user does not have permission to use this obje

    The loged on user does not have permission to use this object-
    I am entering a Sales order, which is customized, when I add the Sales order this system imformation appears.
    The user has a pro-license and authorizations to all AR
    Can someone tell me what my problem might be?

    Thank you for your help

  • I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flas

    I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flashplayer.xpt:5) could not be written due to insufficient permission.

    Perform a clean install as described in https://forums.adobe.com/thread/928315

  • CREATE USER, User does not have permission to perform this action.

    -- first, connect to the master database
    CREATE LOGIN login1 WITH password='Qwerty12345';
    CREATE USER login1User FROM LOGIN login1;
    EXEC sp_addrolemember 'dbmanager', 'login1User';
    EXEC sp_addrolemember 'loginmanager', 'login1User';After, I connect to database 'master' with 'login1User' and execute:CREATE LOGIN login2 WITH password='Qwerty12345'; - okCREATE USER login2User FROM LOGIN login2; - User does not have permission to perform this action.

    Hi Vit007,
    Please check the two database role: 'dbmanager' and 'loginmanager'.
    CREATE USER Requires ALTER ANY USER permission on the database.
    Iric Wen
    TechNet Community Support
    select rm.*, dp2.name AS 'User', dp1.name AS 'Role' from sys.database_role_members rm LEFT JOIN sys.database_principals dp1 ON rm.role_principal_id = dp1.principal_id LEFT JOIN sys.database_principals dp2 ON rm.member_principal_id = dp2.principal_id
    role_principal_id
    member_principal_id
    User   Role
    6  8 
    login1 dbmanager
    7 8 
    login1 loginmanager

  • PSCONFIG - error - USer does not have permission to perform this action

    After installation fo July 14 CU in the sharepoint 2013 server, getting the below error when i ran the PSCONFIG command.
    "An exception of type System.Data.SQLClient.SqlException was thrown. Additional Exception information: USer does not have permission to perform this action"
    My service accounts have db_Owner, db_SecurityAdmin, public, and SPDataAccess to the CONFIG DB.
    Added the services to the local admin group also.
    I am not sure why i am getting this error.
    Any help is much appreciated.
    Thank u

    Hi,
    Did you run SharePoint configuration wizard after applying
    July 14 CU?
    you need to run the wizard after installing the CU.
    Please remember to click Mark as Answer on the answer if it helps you

  • This user does not have an Installed repository

    Hi alll,
    I am establishing the connection with server using JDeveloper 9.0.2.822.I am getting this error
    ""This user does not have an Installed repository"""
    I m new in this JDeveloper. Kindly help how come I can establish
    the connection with server

    Which server you try to connect to?
    Why are you still using jdev 9.0.2? This version is at least 4 years out of date.
    Timo

  • Install PT8.53 with Linux Issue: Jolt client (ip address 192.168.196.102) does not have proper application password

    Folks,
    Hello.
    I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
    Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
    Step 1: start Oracle Database Server and LISTENR is listening.
    Step 2: start Application Server ./psadmin and 8 processes are started.
    Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
    In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
    The application server is down at this time.
    CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
    We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
    Mac OS X 10.6(Snow Leopard)
    Mac OS X 10.5(Leopard)
    iPad
    Oracle Linux Enterprise
    Mac OS X 10.4(Tiger)
    Windows 8
    Windows 7
    Mac OS X 10.7(Lion)
    Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
    191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    I View APPSRV_1023.LOG (current server log file) and its content is below:
    PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
    PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
    PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
    PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
    PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
    PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
    PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
    PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
    PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
    PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
    PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
    PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
    PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
    PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
    PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
    PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
    PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
    PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
    ~                                                                                                                                                        
    I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
    My question is:
    How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
    Thanks.             

    Dear Nicolas,
    Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
    It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
    I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database !

Maybe you are looking for

  • LaserJet 600 M602

    Hi. This is my first time on this forum. I am looking for help. I am trying to access the web configurations for my printer in my office to make modifications to the settings. However, when I try to access the "change settings", it prompts me for a U

  • How do i find out a serial number for acrobat Pro on a computer?

    One of our staff has left the company and I want to transfer the license over to another computer. I have called Adobe Support and they kept on asking for the registered email address which I do not know. Phone support has referred me to this forum.

  • How to add attachment to a mail from client side to an account

    hi all, i am using java mail api for my web-application. what i have done is that when the user submits a weekly-report form , the contents of form are mailed to a specific address acount in gmail from where i can retrieve all mails. i am able to ach

  • Calling a method in a public web dynpro DC from EP

    Hi all, I have a public web dynpro DC which exposes some methods. I want to call these methods from an EP application (JSP Dynpage). IS this possible to do? Any info on this would be of great help. Regards, Narahari

  • Glxgears run as root increases performance on Intel 945G [SOLVED]

    I ran glxgears as normal user and fullscreen fps was 16.4. I ran it as root and fullscreen fps was 126.2. Here are the exact commands in order: $ glxgears $ su # glxgears I did nothing between the commands.  Does anybody know why? Last edited by Lexi