This message wasn't delivered to anyone because it's too large. The limit is 10 MB. This message is 13 MB

Hello,
I wonder if someone can steer me in the right direction on this please. I have a user who wishes to send a message with attachment that is 13Mb in size. I have been through what I believe to be all the settings concerned with message/ attachment sizes. This
is what I have done/covered off so far:
At the Organisation Level
Get-Transportconfig
Max receive size is 20Mb
Max send size is 20Mb
There are no transport rules
Connector Limits
All receive connectors have a minimum of 35Mb
Send connector is set to 15Mb
AD site links cannot be being used as they have only one site
Any help greatly appreciated
Simon

Hi,
Did this issue affect only one user?
Please check if you set message size restriction on user level. You can look at the following article.
Message size limits
http://technet.microsoft.com/en-gb/library/bb124345(v=exchg.150).aspx
Best regards,
Belinda Ma
TechNet Community Support

Similar Messages

Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

Hi,
Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
Does anyone have any suggest course of actions to take?
Many Thanks

This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

"The document can't be opened because it's too large."

I just copied a Numbers '09 file I just made at work (and can still open there) to my MBP and when I try to open it, I get a "The document can’t be opened because it’s too large." error. It's only 1.4MB. I tried reinstalling iWork and re-saving and copying the file to no avail. Has anyone seen this or have any ideas?

I am having a similar problem. I am evaluating Numbers 09 for the first time and would like to get rid of Excel, which seems incredibly slow to open. I'm ready for a change and I like the look and feel of Numbers.
I am working with an export file of data from FileMaker Pro - 3900 rows by 336 colums, so over 1.3 million potentially filled cells. My MacBook Pro has 2 gb of RAM and currently shows 185 free, 495 inactive, 557 wired, and 804 active.
When I try to open the txt file (8.3 mb), I get the error message referred to above. When I open it in Excel, it immediately opens. I can then save it as an Excel file. When I try to open this Excel file in Numbers, it will open but I get a message stating that only 255 or fewer columns are supported.
Could this possibly be right? Granted, who in their right mind would create a data table with that many columns, but when working with legacy data (which is why I have a job) this is often the case and it's my job to clean it up.
Any assistance in both of my errors would be appreciated . . . even if the advice is to stick with Excel

Localizing "The file could not be uploaded because it is too large"

When uploading file af:inputFile in case of larger file as limited in web.xml then this message appears:
Warning: The file upload failed
The file could not be uploaded because it is too large
How to localize this message (maybe some from http://docs.oracle.com/cd/E15523_01/apirefs.1111/e15862/toc.htm?) or how to catch this error to show custom message?
JDev version: 11.1.2.1.0
Regards,
Sašo

Hi,
Do you want to try to override the error message as mentioned here?
http://docs.oracle.com/cd/E14571_01/apirefs.1111/e15862/toc.htm
af_inputFile.MSG_UPLOAD_ERROR Summary error text used to generate a faces message on a failed file upload.
af_inputFile.MSG_UPLOAD_ERROR_DETAIL Detailed error text used to generate a faces message on a failed file upload.
Thanks,
Srini.

Help needed with "Time Machine could not complete the backup" because it is too large

I'm receiving "Time Machine could not complete the backup" because it is too large for the backup disk. I have a 500 GB Time Capsule 802.11n (2nd Gen) and a MacBook Pro running on 10.6.8. I just replaced my laptop's original hard drive with a new 1 TB and restored that with what was on my Time Capsule. Now, I have no backups on my Time Capsule prior to the new hard drive. When I click get info on my hard drive, it states only 296 GB of the 1 TB is used. However, the Time Machine error message states that the backup requires 315 GB but only 221 GB are available. It has deleted all of my old backups, so I would think my Time Capsule should have plenty of room to backup the 296 GB on my computer. Is my old backup from my prior hard drive stuck on the Time Capsule and instead of Time Machine trying to just update those files, it is preserving the old hard drive backup separately and trying to make a new backup of my new hard drive using the remaining space? If so, how do I fix this? Any advice greatly appreciated.

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Research TM Knowledge Base Articles?

Deployment error "file could not be uploaded because it is too large"

Hi,
I'm trying to deploy a WAR application of 220 mb and the upload page fails the the error "The file could not be uploaded because it is too large". Is there any way to workaround this problem ?. What is the limit for a WAR application ?.
Regards,
Paulo

Paul ,
Currently we have a limit of deployment archive size to be less than 100 MB.
Thanks

Can't be copied because it is too large for the volume's format

When I try to save a movie i get the following message: can’t be copied because it is too large for the volume's format. What can I do

Hello,
Are you trying to copy it to a FAT32 formatted drive, which has a 4GB limit?

How can I put my recently purchased iTunes movies on to my thumb drive and WD My Passport external hard drive. My Mac keeps saying "can't be copy because it is too large for the volumes format

How can I put my recently purchased iTunes movies onto my thumb drive and WD my passport external hard drive.My Mac is saying that can't be copied because it is too large for volumes format

[file] is too large for the volumes format
That is usually an indication that the Volume was never Erased or Partitioned for GUID partition table and Mac OS, and is still in a Windows format.
Mac OS X Extended (journaled) has no such file-size limitations

Could anyone tell me how too change the mouse cursor to the waiting mode?

Could please anyone tell me how too change the mouse cursor to the waiting mode while my applet is processing?
Well i have 3 combos in my applet.....and in my actionPerformed code i have:
public void actionPerformed(ActionEvent e) {
if (e.getSource() == combo1) {
          setCursor (Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
ind_reg = combo1.getSelectedIndex();
Do_Accion1();
setCursor (Cursor.getPredefinedCursor(Cursor.DEFAULT_CURSOR));
if (e.getSource() == combo2) {
setCursor (Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
ind_mun = combo2.getSelectedIndex();
Do_Accion2();
setCursor (Cursor.getPredefinedCursor(Cursor.DEFAULT_CURSOR));
if (e.getSource() == combo3) {
setCursor (Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR));
ind_loc = combo3.getSelectedIndex();
Do_Accion3();
setCursor (Cursor.getPredefinedCursor(Cursor.DEFAULT_CURSOR));
} // Fin action event
But my cursor is never change to WAIT_CURSOR....Somebody could help me please?....
Thanks in advance....
Mary

YourComponent.setCursor(
     Cursor.getPredefinedCursor(
     Cursor.WAIT_CURSOR));

The item "Mam's Australian Adventure.mov" can't be copied because it is too large for the volume's format

I am attempting to tranfer a movie from my local hard drive to my WD 2TB HD and the comment on my screen is: The item “Mam's Australian Adventure.mov” can’t be copied because it is too large for the volume's format. Can you help me?

How is your WD drive formatted? If FAT32 you have probably hit its file size limitation. Unless you are also running Windows, your external drive should be formatted as HFS Extended (Journaled).

The item "Adkison Interdate.mov" can't be copied because it is too large for the volume's format

Why do I keep getting this error whan I try to mov a small gig file to a 2 TB drive?

I felt like I needed to.
I wanted to make sure I posted the error message.

Outlook Error message on every replication: IMAP Server wants to alert you to the following: email is too large, please limit to less than 20MB

I cannot find any emails in my sent file exceeding the 20MB maximum and this message pops up every time the system replicates. Need to close it to continue working but it does not show me where the error is. I am using Windows 8

Hi,
In addition to Clark's advice, please refer to
http://www.itninja.com/blog/view/how-to-fix-large-or-multiple-files-attachment-problem-in-outlook
Important
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the
registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

The file "" can't be copied because it is too large for the volume's format

I've come across this error whilst trying to transfer a 7 gigabyte file onto various hard drives. It is apparent that file sizes smaller than this can be transferred however there seems to be a problem with this. I've tried to use the help of various forums but I simply have to no clue what to do. Any help would be greatly appreciated. Specs; Macbook Pro 13-inch, 2.5 GHz Intel Core i5, OSX 10.9.4

You need to either segment the file or reformat the drive as Mac OS Extended, exFAT, or NTFS.
(114117)

Big file can't be copied because it is too large for the volume's format

even thought i have formated my hard drive as an mac extended. but still facing the same problem so what could be the solution of this kind of problem..

HFS+ has a volume size limit of 8 exabytes, and so far I haven't seen any drives in those volume sizes.
What's likely the problem is there isn't enough free space to copy the file to your hard drive.

The item can't be copied because it is too large for the volume's format

i have a macbook pro and a external hard drive 1tb. the thing is i can not copy any file that is more than 4gb. i know that fat partiotion has restriction. How i can format my external hard drive so i can copy and paste file on it from windows and mac os?

That is because the drive if formatted FAT32 and with a FAT32 formatted drive you can't store any file that is larger then 4GB (actually you can't store/save any file that is 4GBs. It has to be Slightly smaller then 4GB).
So you need to format that drive with Mac Extended (Journaled) with a Partition Table of GUID or format it exFAT.
exFAT if you plan on using that external on both Mac and Windows computers. Mac Extended (Journaled) if it will only be used on Mac computers.
If you format it exFAT do that on a Windows computer as Mac screws up the formatting and it then can't be read on Windows computers. Doing it on a Windows computer it can be read and written to on both Win and Mac.

This message wasn't delivered to anyone because it's too large. The limit is 10 MB. This message is 13 MB

Similar Messages

Maybe you are looking for