This might be a Phishing message and its potentially unsafe.

"This might be a Phishing message and its potentially unsafe. Links and other Functionality have been disabled. Click here to enable the functionality(Not recommended)."
We have Exchange 2007 environment and mixed of Outlook 2003, outlook 2007 and outlook 2010.
Today, one of our team created a application triggered Survey mail and sent internally.
The survey mail has been reached all the outlook clients but considered as Phishing mail with the above warning.
On checking the Survey email i could see there is a link for the IP address(http:\\130.X.X.X\Survey) Ex: Survey form which directs to an aspx page.
I need to ensure this is not blocking or pop-up as Phising mail anymore, since it's a internal survey.
My suggestion to avoid the Phising are:
1. Change the IP address to valid internal Domain name.(i.e. Valid DNS name)
or
2. Using this option :http://support.microsoft.com/kb/2252421
But unfortunately there is no GPO configuration currently in our Enivronment.
Please share your valuble comments and any help is much appreciated.
Regards, Bhoopat.

Besides, you can disable phishing option from outlook.
You can find the option from Tools-Options-Junk email
Xiu Zhang
TechNet Community Support

Similar Messages

"Extracting...this might take a while" message and download status bar running for 15 hours.

Having purchased Adobe Acrobat XI Pro Mac Download, and installed the program with Adobe Download Assistant, the program is loaded but the status bar has continued to run for 15 hours with a message underneath stating "Extracting...this might take a while". Also, a warning message appeared during download stating "The following disk images couldn't be opened"; (Image) AcrobatPro_11_Web_W, (Reason) error -4960. How do I complete this download?

Check for the Internet connection. If its good, then try the same with a different broswer. Below link would help in this scenario,
http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html

Security processor was unable to find a security header in the message. This might be because the message is an unsecured fault or because there is a binding mismatch between the communicating parties.

We have a web role where we have hosted a WCF service.
We are facing the below exception intermittently on consuming the service.
Security processor was unable to find a security header in the message. This might be because the message is an unsecured fault or because there is a binding mismatch between the communicating parties. This
can occur if the service is configured for security and the client is not using security.
This is intermittent. Few calls fail , and the subsequent calls succeed without making any changes.
Please help in overcoming this abnormal behavior.
Thanks in advance !!
Best Regards ,
Eswar

Hi Eswar,
As the error message mentioned, it may be a mismatch between the configuration on the client and the server.Try putting all your configuration in a binding configuration and then use the same binding configuration on the server and client. Since this issue
is more related with WCF, I suggest you move to WCF forum, it is appropriate and more experts will assist you.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Download Links for JMS Explorer to view message and its details

Can i get the links for downloading the JMS explorer to view messages and its details on j2ee server.

I checked Hermesjms tool but found that it does not work with j2ee server.
Is there any other JMS explorer tool to view messages and its details on j2ee server specifically.

Why this error display "Adobe Flash Player has stopped potentially unsafe operation"

why this error display "Adobe Flash Player has stopped potentially unsafe operation"
In message box following message display:
The following local application on your computer or network: null
is trying to communicate with this internet-enabled location : www.ajaxcdn.org

I get the same message and I already have the latest version (20.0.1) installed. Any other suggestions? Please and thank you!

HT5957 I haven't updated my ios 7, and now ios 7.0.2 is out... Will this update erase all my messages and pictures, and if this update is going to be like the ios7

I haven't updated my ios 7, and now ios 7.0.2 is out... Will this update erase my data now and if it will be like the ios7 even though i didnt update it

Klaudija. wrote:
How much time does it take now to update the ios 7.0.2 .. ??
Totally dependent on the speed/quality of your Internet connection.

Blackberry Z10 keeps getting update message and its already updated

I have a BB Z10, whenever I plug it into the computer I get the message that an update is available. I ave updated the device a couple times and my device is currently running 10.1.0.273. Is this a normal thing?

Had the same issue, also on Rogers.
It would ask me for an update, then tell me that the update failed, over and over again.
Ended up deleting Rogers apps (1Number, My Account, Anyplace Live) - went through BBWorld...My World...My Apps and Games, although long-press and delete should work too.
Haven't been asked to update since.
HTH

TS4006 i was about to have my iphone activated and got lost. i have app "find my iphone turned on so far it says offline message and its been a week past. I was wondering if there is a way apple could detect it on some special program...

last week i went to thte bank and made a withdrawl for having my iphone activated back only to have found out later that she's no where to find. I hen proceed to check on her on my appfs find my iphone but to no avail for it was noted to have "offline". my closest guess would be on the bank's camera but the people whom i speak with has a lack of initiative to help me out and end up to get involve but a limited and not sufficient enough to satisfy me since i only see me and the tellers pose and i specifically stated to them while i was on line waiting coz i end up making hide and seek to a toddler of one and a half years and boy everytime i shows up my surprise me on a pamplet maybe my only clue to have ended dropping my phone in replave of the pamplet randomly left by one of the customer, she would simply roll her eyes and face on a different direction, we where even like a quick show for everyone who where there waiting as well.
my question is since everytime i checked it always on the offline mode, is there anyway possible to still locate it through her serial/IMEI number or like a special program to detect it. Do i still have a chance to recover after a one week missed siri ? pls. enlighten me for she was my best buddy. thanks

There's no other way to track it other than Find My iPhone. All you can do is wait to see if it ever goes back online. The serial number will only help to identify it as yours if it is ever found, and the IMEI number would only allow your carrier to blacklist the phone so it couldn't be reactivated on their network, if the carrier offers this service.

Why does this iPad not save sent messages and won't allow a message to be sent to trash?

Received a used iPad as a gift. In email, it won't save any sent messages, nor will it allow me to Trash a message. Sent email goes out, but no copy saved in any folder. When I try to delete a message, it temporarily disappears but comes back when I open mail again. Also get message that says "Unable to move message to Trash."
Thanks for your help
Clearheart

For the deleting emails, try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
A second option if that doesn't work then try closing the Mail app via the taskbar : double-click the home button to open the taskbar and then swipe or drag the Mail app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
And a third thing to try is to go into Settings > Mail, Contacts, Calendars. Then select the account on the right-hand side of that screen, select Account, then Advanced, Deleted Mailbox, and under On The Server tap the 'Trash' folder so that it gets a tick against it - then come out of that series of popups by tapping on the relevant buttons at the top of them and then see if you can delete emails.
For the sent emails check what folder they are being stored, in a similar way to the above third option for deleting emails.

HT1937 I try to send text messages and its not getting deliver

I try to find out why I can't send messages with my ipod.

Are you having a problem with SMS? Or iMessages? Or both? What happens when you try? What error messages are you getting? What troubleshooting steps have you taken?

When I save a bookmark, the "Bookmark This Page" box is very small, and its hard to choose the proper subcategory because I have to scroll a tiny screen with the mouse. Is there any way to increase the size of this "Bookmark Save" box?

ver 3.6.11

1. The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/
2. See [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page How to set the homepage]

How to move messages in "Saved Messages" and "My F...

I've just upgraded my phone from 6280 to N73 Music Edition.
To transfer all transferrable data from 6280 to N73, I used PC Suite 6.84.10.4 to backup 6280 and restore it on N73.
Contacts, calendar, bookmarks, messages in the Inbox/Outbox/Draft/Sent Items are all transferred well into N73. However, it's not transferring my messages in 6280's Saved Messages and its user-created folders!
On the 6280 phone itself, I tried to move messages into Inbox but it doesn't work. 6280 only allows moving of messages in the user folders to other folders or the Saved Messages folder.
I have lots of messages stored in my 6280's Saved Messages and folders. How can I transfer them all to my new N73 phone? Would appreciate help.
Thanks

10-Oct-200708:52 PM
okidal wrote:
i would try to use "messages" in the pc suite (or what the yellow envelope is called in english).
there you can mark all messages in a folder and copy them to your pc. on the new phone vice-versa.
I've just tried it out. I can select all messages from the Archives or My Folders of 6280 using PC Suite and drag them into a PC folder. This works. However, when I tried to select all messages from the PC folder and drag into Inbox of N73, the messages are not copied.
So, this method doesn't seem to work

Sending picture messages and data

Ok, this might have already been answered and I really apologize if it was. I recently went from an HTC Inspire 4G to a Samsung Galaxy Mega 6.3 and I'm really really confused. With both my HTC phones (Vivid and Inspire 4G) I never had to turn mobile data on but I still got pictures and could send them with no problem. The 4G LTE icon was always showing on my display but the mobile data in the settings was turned off. Now with the Galaxy Mega I have to turn on my mobile data to receive or send pictures and I never have the 4G showing unless the data is on. I asked AT&T they told me that sending pictures without mobile data was impossible and yet I was still doing it. I love sending pictures when I'm out and about but I've only got 3G shared between two phones because we thought we wouldn't ever need that much since the pictures/videos sent without using it. Now however I feel like I need to pick and choose what I send and what I decide to download from others. I really loved having the freedom of sending pictures whenever I wanted without having to worry about it and why does the 4G not ever show up unless data is on?

Well, the 4G showing means that your phone had established a 4G (HSPA+) cellular data connection with AT&T. When that shows, you can send & receive MMS (the micture, audio or movie) messages. SInce it was showing before, that would explain why you could always send & receive the messages with no problems before. The fact that the messages don't send (or receive) when your cellular data is turned off (and teh 4G doesn't show then) means that on your new phone, the cellular data does turn off completely when you turn it off in the settings.
It sounds to me like your old phone had either a bug where the 4G didn't really turn off when you turned it off in teh settings, or that it had a feature to enable it only for voice and MMS messages. the fact that the 4G doesn't show when you have that setting turned off on your new phone just means that it is actually working properly, even though it is not really what you want it to do. Since I'm not familiar with your phone models, and I don't know what version of Androis you are running, I can't really try to help you to determine if there is a combination of settings to get your new phone to act like your old one did.
After initially posting, I did a quick Google search and found a thread on Android Central where it indicates that some HTC phones (and some Android ROMs) allow for a settign to automatically switch your mobile data on to send & receive MMS messages. I suspect that your previous phone had that and it was enabled and your new phone either doesn't have it, or it isn't enabled. You could try checking to see if your phone has the setting, ut it is just disabled.

Help on Business Function "Reporting Financials 2" and its impact

Hi All,
I am looking at 'SAP Help' for Reporting Financials 2 (EhP4).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6a/cd7dbd74694af3ac13b3c24a10def4/frameset.htm
basically I want to use the standard extractor 0FI_AA_20 FI-AA: Transactions and Depreciation . when i try to run the extractor i get an error saying: Business Function "Reporting Financials 2" is not switched on
In order to use the new data sources the pre requisites are:
1. SAP Enhancement Package 4 for SAP ERP 6.0
2. Activated the Reporting Financials 2 business function.
The EnP4 is already implemented what i have do next is to activate the business function.
Can any one help me with more details on what all gets activated with this business function 'Reporting Financials 2' and its impact.
With Best Regards
Shilpa.

Hi,
in SFW5 you can get an overview over the business functions. There you could activate the appropriate Business Function.
But I would recommend you strongly before to read some information and documentation about business functions and the enhancement package concept.
Regards,
Markus

HT201210 My iphone 4s failed to update. What are some reasons why this might happen?

My IPhone 4S failed to update. Anyone know what are some reasons this might have happened?

Download and save firmware from here
iPhone4,1_6.1.3_10B329_Restore.ipsw
Connect iPhone in iTunes. Option+Restore (Mac) Shift+Restore (PC) pointing to saved .IPSW file.

This might be a Phishing message and its potentially unsafe.

Similar Messages

Maybe you are looking for