This might help for the t new ios 6.1.2

Ok, this is something I did on my iPhone 3G, and now I can get apps from appstore again. It's pretty simply all you do is go into wifi and then the wifi hotspot
You are in and go into dns you can ether delete the whole dns number and then press wifi ( don't put anything in the dns box) or I hope this will work for you put this dns into it 192.168.1.1 that is the current dns I have! I'm going to check on this form.as much to make sure it works for everyone! Plz try it and let me know

I had recently upgraded my 4S to iOS 6.1.2. All was well except Facetime and iMessage. For "Waiting for Activation" under the iMessage setting, this is what I did after 2 days of waiting:
Plugged in to PC
backed up contacts etc on iTunes
Reset the iphone from settings>general>reset>erase all data and settings
Set up the phone as new
after setting up restored from back up on iTunes
iMessage working!
Oh and first it was working from the emails i set up. I had to uncheck all emails from Settings>Messages>Send and receive, to make iMessages shift to my phone number.
Also in my experience saying "OK" or "Cancel" to "Carrier may charge for an SMS" did not make a difference.
Hope it helps everyone stuck at "Waiting for activation"!

Similar Messages

Perhaps this might help for the iOS 5 update?

Ok, here are the steps I took when performing my iOS 5 update on my Verizon iPhone 4.
I have a Macbook Pro (2008). I had upgraded to OSX Lion about 3 months ago. The FIRST thing I did was upgrade my iTunes to the latest version. If you check the specs for iOS 5 update, it says it needs iTunes 10.5 to run. So, I downloaded the iTunes update directly from the apple website.
After this was completed, I checked for any and all upgrades for OSX Lion and discovered there were 2 available to me, so I downloaded those (which took about 20 minutes from start of download to reboot time.)
Now at this point I had waited over 24 hours to upgrade to iOS 5 because of the sheer amount of traffic I'm sure the servers were getting. My first step after I plugged my phone in to update was to BACK IT UP!
When iTunes prompted me to download and update I simply chose to DOWNLOAD ONLY. After the download process was complete (about 10 minutes,) I backed up my phone one more time.
At this point I decided to update the phone. Now the process in and of itself took between 1 and 2 hours. I have a lot of apps and that process seemed to take the longest to restore (about 45 minutes.) Not once did my phone freeze or lock in any way and my phone works fine running the iOS 5 software. Nothing was lost, and everything on my phone was restored completely.
These were my steps in updating to iOS 5. I'm only submitting my helpful hints and this is what worked for me.
**HERE'S THE CATCH** b/c let's face it, there's ALWAYS a catch!
I had a phone issue BEFORE the update. My phone would not allow me to hear through the speaker the sounds of incoming voices nor could I hear anyone while making a call. I could only hear people who I called or who called me when the phone was on speaker mode. I thought that maybe upgrading to iOS 5 would fix the issue. After the update, I did any and all tips for fixing the issue including restoring the phone completely. After talking with Verizon they're sending me a "replacement" a.k.a refurbished phone. This is not satisfactory to me in any way, so a good friend who works for the local Apple store here in Cincinnati told me to bring the phone in w/ the original receipt (the phone is almost 4 months old,) and they would replace it with a new one. Kudos to Apple if this is the case.
Issue 2, could not connect with iCloud and I'll just chalk it up to server overload.
Hopefully this helps anyone in any way. As I said before I had no problems and I just took a few extra steps in the process. iOS 5 is really some nifty software and I'm really digging the iMessage feature.
To anyone having difficulties and issues, I'm truly sorry and hope you all get it taken care of. Have a good one!

If you cannot wait:
download the iOS5.0.1 file directly to your PC (~700MB), if that works better, connect the iPhone and Alt+click on the "Update" button, choose the newly downloaded file.
If you cannot wait at all, do the update on the iPhone itself (~38MB), but you still have to download the iOS full file to your PC, otherwise it will not be there when one time you need to restore: copy it to
for XP:
Documents and Settings\<User>\Application Data\Apple Computer\iTunes\iPhone Software Updates
for W7:
Users\<User>\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
You throw awy the downloaded when after a time you are sure that everything is OK and the full iOS stays in the Updates folder.

The account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order, please respond as soon as possible.

My email account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order process, please respond as soon as possible.
<Email Edited by Host>

This is a user-to-user technical support forum. No one here can help you.
Try
https://expresslane.apple.com

Audio cable help for the new AppleTV.

Audio cable help for the new AppleTV.
Currently I have an original AppleTV with audio RCA plugs to mini plug into my BOSE speakers.
The 2nd Gen AppleTv has a Toslink input. I've looked at cables of Toslink to optical mini. Will this cable work? The optical mini part I'm not sure of what it is.
Thanks so much. The monitor I use doesn't have speakers.
This is the cable I see at Amazon
http://www.amazon.com/gp/product/B0002JFN1K/ref=ordcartshr?ie=UTF8&m=ATVPDKIKX0DER
Message was edited by: musicmaker

If I understand your question correctly, you want to connect your Apple TV2 to your Bose system using a mini plug.
You will need an optical to digital coax RCA converter (find it on Ebay about $15), then you can connect your mini cable. Here is a link to one I recently bought on Ebay: http://fwd4.me/nrQ

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

HT204053 i couldn't open new terms and conditions of icloud, and so i can't use the icloud on my device iphone 5, this problem appears, when I get new ios 7

i couldn't open new terms and conditions of icloud, and so i can't use the icloud on my device iphone 5, this problem appears, when I get new ios 7

Try download the Find My Friends app and signing in to accept the terms and conditions there.

Since updating my iPhone 4 to iOS5, my music stats (play count, last played, etc.) no long sync to iTunes. How can I fix this? Thanks for the help.

Since updating my iPhone 4 to iOS5, my music stats (play count, last played, etc.) no long sync to iTunes. How can I fix this? Thanks for the help.

If you have any podcasts in your iTunes library you should see a Podcasts sync setting tab to the right when you connect your phone and click on its name on the left sidebar (see image below). On this tab check to sync podcasts and sync your phone.

Issue with F4 help for the variables for the 0CALWEEK and 0CALMONTH

We have custom IOs which refers to 0CALWEEK and 0CALMONTH.In the report we have variables on the custom IOs.For these variables F4 help does not giving any values .I tested with 0CALWEEK also. For the 0CALWEEK also F4 help does not working..Please help me on this issue.The variable I haveused d to test with 0CALWEEK is 0S_CWEEK.
Edited by: Sudhakar Are on Jul 6, 2010 4:17 PM

Hi Pramod,
I don't know how it is done in infoset. But if you have a context node and attribute for the field which is displayed in the view, create a custom dictionary search help for the field you want. Design the search help as per your requirements (what fields to be displayed etc..).
In the context attribute of that field property, select 'Dictionary search help' in the Input help mode. Enter the name of your custom search help here.
Thanks & Regards,
Satheesh.

How can I do this input help in the Input ready query

Dear all,
Do you konw this function?
The following steps is that:
1,I create the Input ready Query.
2,I can insert the new record.
3,I can use the input help for the characteristics.
4,When I double the space, I got the pop-up for input help.
5,I want to get the function is that:
for example:
char1 is the char2 attribute.
char2 - - - - - - - -- - char1
m- - - - - -- -- - - - -a
n-- - - - -- - - - - - a
u- - - - -- - - - - - - -a
v- - - - - - - - - - - -b
w- - - - - - - -- - - -b
x- - - - - - - - - - - - b
when I write the "a" for the char1 in the new record at input ready query, I only want to got "m","n","u" for char2 from the char2 input help.
How can do it?
Thank you so much.
Best regards,
Leon

Hello Leon,
As you have already set char1 as an attribute of char2, what you would need to do is create an attribute variable for char2 of type exit.
Using a variable exit, you can pass the value of char1 to char2. This would then automatically restrict the selection list to "m", "n", "u" as values for char2 when you enter "a" as the value for char1.
Hope this helps.
Sunil

Oracle Help for the Web 2.0 Production

Oracle Help for the Web 2.0 is now available on OTN Downloads.
Oracle Help for the Web (OHW) 2.0 is a major update to the previous releases OHW 1.1x and OHW 1.0.x, and is designed and recommended to replace both.
Some of the new features in 2.0 include the following:
Support for Bookmarking Navigator Pages
OHW 2.0 no longer uses frames to store navigational state on the webpage. Each navigator stores its complete state on the URL, allowing each page to be bookmarked. This includes TOC locations, keyword locations, and search runs. In the view topic page, the frame information is also saved, allowing a user to forward the link via email, etc to the displayed topic. In addition, if you navigate to a named anchor within a topic page, this page position is also saved and is bookmarkable.
Multiple Locale Support in a Single Instance
OHW 2.0 can now support multiple locales in the same servlet instance. After you register the helpsets in the OHW configuration file, the OHW servlet will automatically determine the best locale to use for a user request (based on browser settings and what locales are available), and display the localized helpset (along with a localized OHW chrome) to the user. This feature also means that if you navigate to a topic in English, and then send the link via email to a user whose browser supports Japanese, if the Japanese helpset is registered, the topic link will appear in Japanese to the second user.
Search Engine Support
OHW has been specially designed so that search engine crawlers can reach all hosted content (including table of contents, and index pages) and easily traverse within and between the available navigators. Page titles have also been redesigned to make pages easier to locate from within a search engine result set.
Ability to Share Resources Across Localized Helpsets
OHW can be configured so that helpsets can share resources such as images and CSS stylesheets. Since each localized helpset no longer needs its own resources, this can dramatically reduce the size of the deployed file.
Relative Content Locations
Content locations can now be specified relative to the OHW configuration file.
True Popup Support
OHW now properly supports Oracle Help popup links. Following this link will bring up a dynamic draggable DHTML window (or a normal popup window if the browser does not support it) with the requested topic page.
All Level Merging in the Table of Contents
Using the default TOC engines, each level of the TOC will merge like elements together. This change reflects modifications made to core Oracle Help classes and mimics the feature added to Oracle Help for Java (OHJ).
New Tree-based Table of Contents Navigator
The Tree-based TOC navigator shows the data in a heirarchical fashion and allows the user to see the full TOC (and not just a limited part of the TOC, as with previous versions of OHW). The tree-based TOC navigator is a standard navigator and can be added by including it in the helpset configuration file.

Yes, I am now able to access this page and download OHW.
Thanks very much,
Lucie

Security processor was unable to find a security header in the message. This might be because the message is an unsecured fault or because there is a binding mismatch between the communicating parties.

We have a web role where we have hosted a WCF service.
We are facing the below exception intermittently on consuming the service.
Security processor was unable to find a security header in the message. This might be because the message is an unsecured fault or because there is a binding mismatch between the communicating parties. This
can occur if the service is configured for security and the client is not using security.
This is intermittent. Few calls fail , and the subsequent calls succeed without making any changes.
Please help in overcoming this abnormal behavior.
Thanks in advance !!
Best Regards ,
Eswar

Hi Eswar,
As the error message mentioned, it may be a mismatch between the configuration on the client and the server.Try putting all your configuration in a binding configuration and then use the same binding configuration on the server and client. Since this issue
is more related with WCF, I suggest you move to WCF forum, it is appropriate and more experts will assist you.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why do I see "Blocked Plug-Ins" when I try to play a video - this is generally on the BBC News website. I haven't tried elsewhere.

Why do I see "Blocked Plug-Ins" when I try to play a video - this is generally on the BBC News website. I haven't tried elsewhere.
I have an old Mac 2009.

Hello alymarvellous,
Take a look at the article linked below, it provides information about the plug-in alert that you’re seeing when browsing specific websites on your iMac.
Safari 8 (Yosemite): Safari troubleshooting
Problems with plug-ins
If a webpage has trouble showing plug-in content such as video, you may see a placeholder with a button that describes a plug-in problem. For example, the plug-in might be old, missing, or blocked.
Try clicking the placeholder button to resolve the problem.
For more information, see If a plug-in is missing and If a website has plug-in content.
Cheers,
-Jason

I keep getting exclamation marks on my playlist on itunes, but this is only for the songs downloaded on my phone. I can't play any songs on my phone, only on the original itunes library. Whats going on??

but this is only for the songs downloaded on my phone. I can't play any songs on my phone, only on the original itunes library. Whats going on??

The iPod backup that iTunes makes does not inlcuded synced media like apps and music. Thes those iTunes are not restored to the iPod unless they are in the iTunes library.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Where is the help for the latest malware attack on macs from flash player?

Where is the help for the latest malware attack from flash player? I am running mac ox x v10.7 lion, and everything that I can find says to download Java and neither of them will work. 10.6 update says its for version 10.6. java for osx date 7 says it will damage hard drive !!!
How do I know if I have this and what can I do to protect my computer? I JUST DOWNLOADED FLASH PLAYER A WEEK AGO. I deleted it from my computer but how do I know if I have malware?????????

There is a new user-friendly Flashback detection-removal tool from F-Secure available here:
Flashback Removal Tool
http://www.f-secure.com/weblog/archives/00002346.html
Apple has promised one also, but it has not yet been released. See
About Flashback malware
http://support.apple.com/kb/HT5244

Touch pad not working of my laptop 48510s help for the same

touch pad not working of my laptop 48510s help for the same

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set....

This might help for the t new ios 6.1.2

Similar Messages

Maybe you are looking for