This morning Find My Phone alert went off on all my devices connected to my Apple ID at the same time, is this a bug or should I be worried that my id is hacked? I didn't have Find My Phone app installed on many of these devices. Please advice. Thanks

This morning Find My Phone alert went off on all my devices connected to my Apple ID at the same time, is this a bug or should I be worried that my id is hacked? I didn't have Find My Phone app installed on many of these devices. Please advice. Thanks in advance.

If you have enabled Find My iPhone/iPad on your devices, any one with access to your Apple ID and Password can Play Sound on your devices.
Tap to enlarge image.

Similar Messages

  • Can you have more then one iphone control the apple tv at the same time?

    Can you have more then one iphone4 as a remote for one apple tv at the same time?

    iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

  • I was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

    i was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

    Problem here is you admit you cannot afford the service.
    And you want to blame Verizon for losing a job because you have no cell phone.
    If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
    No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
    Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
    Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
    Good Luck

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

  • Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

    Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

    The iPad has a micro-SIM card slot - nothing special or unique about it.
    The iPad is not sold as carrier locked.

  • If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them?

    If i have my mac mini and my mac air connected to my thunderbolt display at the same time how do I switch between each of them without unplugging one of them? (By the way im mirroring my macbook air to my thunderbolt display not dual screening it)

    That's not what home sharing is for or how it works.
    You want the remote app.

  • DHCP Server with the strange MAC address at the same time. This MAC address is HEX IP address!

    Server version: Windows server 2008 R2 Ent.
    Structure of DHCP scopes: Two DHCP server 50% to 50% all allocation for per scopes.
    Question: Sometimes the DHCP server
    allocate the IP address at the same time to the a strange MAC address per  IP  address, the type is "DHCP/BOOT", it cause DHCP scopes out of space at some time point.  We need clear up them manually.
    I found strange MAC address in HEX is the IP address which the server allocated. 
    Someone meet the issues before, any solution for this ? 
    Thanks !
    Client IP Address
    Name
    Lease Expiration
    Type
    Unique ID
    10.199.190.0
    10.199.190.0
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e3000
    10.199.190.46
    10.199.190.46
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e343600
    10.199.190.59
    10.199.190.59
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e353900
    10.199.190.69
    10.199.190.69
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e363900
    10.199.190.74
    10.199.190.74
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e373400
    10.199.190.90
    10.199.190.90
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e393000
    10.199.190.101
    10.199.190.101
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31303100
    10.199.190.104
    10.199.190.104
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31303400
    10.199.190.110
    10.199.190.110
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31313000
    10.199.190.114
    10.199.190.114
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31313400
    10.199.190.117
    10.199.190.117
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31313700
    10.199.190.121
    10.199.190.121
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31323100
    10.199.190.138
    10.199.190.138
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31333800
    10.199.190.144
    10.199.190.144
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31343400
    10.199.190.153
    10.199.190.153
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31353300
    10.199.190.156
    10.199.190.156
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31353600
    10.199.190.157
    10.199.190.157
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31353700
    10.199.190.163
    10.199.190.163
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31363300
    10.199.190.165
    10.199.190.165
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31363500
    10.199.190.168
    10.199.190.168
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31363800
    10.199.190.169
    10.199.190.169
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31363900
    10.199.190.174
    10.199.190.174
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31373400
    10.199.190.177
    10.199.190.177
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31373700
    10.199.190.184
    10.199.190.184
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31383400
    10.199.190.188
    10.199.190.188
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31383800
    10.199.190.189
    10.199.190.189
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31383900
    10.199.190.192
    10.199.190.192
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31393200
    10.199.190.197
    10.199.190.197
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e31393700
    10.199.190.201
    10.199.190.201
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32303100
    10.199.190.202
    10.199.190.202
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32303200
    10.199.190.209
    10.199.190.209
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32303900
    10.199.190.210
    10.199.190.210
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32313000
    10.199.190.211
    10.199.190.211
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32313100
    10.199.190.212
    10.199.190.212
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32313200
    10.199.190.213
    10.199.190.213
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32313300
    10.199.190.216
    10.199.190.216
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32313600
    10.199.190.219
    10.199.190.219
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32313900
    10.199.190.222
    10.199.190.222
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32323200
    10.199.190.225
    10.199.190.225
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32323500
    10.199.190.226
    10.199.190.226
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32323600
    10.199.190.229
    10.199.190.229
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32323900
    10.199.190.233
    10.199.190.233
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32333300
    10.199.190.235
    10.199.190.235
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32333500
    10.199.190.238
    10.199.190.238
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32333800
    10.199.190.240
    10.199.190.240
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32343000
    10.199.190.242
    10.199.190.242
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32343200
    10.199.190.243
    10.199.190.243
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32343300
    10.199.190.246
    10.199.190.246
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32343600
    10.199.190.249
    10.199.190.249
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32343900
    10.199.190.251
    10.199.190.251
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32353100
    10.199.190.252
    10.199.190.252
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32353200
    10.199.190.255
    10.199.190.255
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139302e32353500
    10.199.191.1
    10.199.191.1
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e3100
    10.199.191.2
    10.199.191.2
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e3200
    10.199.191.5
    10.199.191.5
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e3500
    10.199.191.6
    10.199.191.6
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e3600
    10.199.191.8
    10.199.191.8
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e3800
    10.199.191.13
    10.199.191.13
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e313300
    10.199.191.14
    10.199.191.14
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e313400
    10.199.191.15
    10.199.191.15
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e313500
    10.199.191.16
    10.199.191.16
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e313600
    10.199.191.17
    10.199.191.17
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e313700
    10.199.191.18
    10.199.191.18
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e313800
    10.199.191.19
    10.199.191.19
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e313900
    10.199.191.20
    10.199.191.20
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e323000
    10.199.191.21
    10.199.191.21
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e323100
    10.199.191.22
    10.199.191.22
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e323200
    10.199.191.23
    10.199.191.23
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e323300
    10.199.191.24
    10.199.191.24
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e323400
    10.199.191.27
    10.199.191.27
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e323700
    10.199.191.29
    10.199.191.29
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e323900
    10.199.191.30
    10.199.191.30
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e333000
    10.199.191.31
    10.199.191.31
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e333100
    10.199.191.32
    10.199.191.32
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e333200
    10.199.191.33
    10.199.191.33
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e333300
    10.199.191.34
    10.199.191.34
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e333400
    10.199.191.37
    10.199.191.37
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e333700
    10.199.191.38
    10.199.191.38
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e333800
    10.199.191.39
    10.199.191.39
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e333900
    10.199.191.42
    10.199.191.42
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e343200
    10.199.191.44
    10.199.191.44
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e343400
    10.199.191.49
    10.199.191.49
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e343900
    10.199.191.52
    10.199.191.52
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e353200
    10.199.191.54
    10.199.191.54
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e353400
    10.199.191.56
    10.199.191.56
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e353600
    10.199.191.61
    10.199.191.61
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e363100
    10.199.191.62
    10.199.191.62
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e363200
    10.199.191.64
    10.199.191.64
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e363400
    10.199.191.65
    10.199.191.65
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e363500
    10.199.191.66
    10.199.191.66
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e363600
    10.199.191.70
    10.199.191.70
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e373000
    10.199.191.72
    10.199.191.72
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e373200
    10.199.191.73
    10.199.191.73
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e373300
    10.199.191.79
    10.199.191.79
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e373900
    10.199.191.80
    10.199.191.80
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e383000
    10.199.191.81
    10.199.191.81
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e383100
    10.199.191.82
    10.199.191.82
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e383200
    10.199.191.83
    10.199.191.83
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e383300
    10.199.191.84
    10.199.191.84
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e383400
    10.199.191.86
    10.199.191.86
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e383600
    10.199.191.90
    10.199.191.90
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e393000
    10.199.191.91
    10.199.191.91
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e393100
    10.199.191.92
    10.199.191.92
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e393200
    10.199.191.93
    10.199.191.93
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e393300
    10.199.191.97
    10.199.191.97
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e393700
    10.199.191.98
    10.199.191.98
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e393800
    10.199.191.99
    10.199.191.99
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e393900
    10.199.191.101
    10.199.191.101
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31303100
    10.199.191.102
    10.199.191.102
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31303200
    10.199.191.105
    10.199.191.105
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31303500
    10.199.191.106
    10.199.191.106
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31303600
    10.199.191.108
    10.199.191.108
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31303800
    10.199.191.112
    10.199.191.112
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31313200
    10.199.191.115
    10.199.191.115
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31313500
    10.199.191.116
    10.199.191.116
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31313600
    10.199.191.117
    10.199.191.117
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31313700
    10.199.191.119
    10.199.191.119
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31313900
    10.199.191.120
    10.199.191.120
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31323000
    10.199.191.121
    10.199.191.121
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31323100
    10.199.191.125
    10.199.191.125
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31323500
    10.199.191.133
    10.199.191.133
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31333300
    10.199.191.146
    10.199.191.146
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31343600
    10.199.191.158
    10.199.191.158
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31353800
    10.199.191.162
    10.199.191.162
    2014/8/5 10:07
    DHCP/BOOTP
    31302e3139392e3139312e31363200

    Hi,
    According your description, this may be caused by virus or malicious client.
    Please try to perform a network capture on your DHCP server. Then find the device which send these malicious discover messages.
    To download Network Monitor, please click the link below,
    http://www.microsoft.com/en-hk/download/details.aspx?id=4865
    To prevent this issue, you may implement NAP Enforcement for DHCP.
    Here is a checklist of configuring NAP Enforcement for DHCP,
    Checklist: Configure NAP Enforcement for DHCP
    http://technet.microsoft.com/en-us/library/cc772356(v=WS.10).aspx
    Hope this helps.
    Steven Lee
    TechNet Community Support

  • No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

    Hi All,
         It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
    Is there any way around this if i want to use the 2 at the same time?
    How does this work with SharePoint 2013 as i would be doing some migrations?
    Cheers in Advance

    Hi,
    As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
    As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
    you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
    After you choose one of them, you can open the site.
    https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
    When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
    a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
    So I think there are some other reasons to cause the issue.  
    Check these things below:
    1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
    2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
    Settings > SharePoint Designer > ensure Enable SharePoint Designer
     is selected).
    3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
    More references:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
    https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
    Best regards
    Sara Fan
    TechNet Community Support

  • Why do I get a NI-488 error massage when writing into a file and at the same time copiyng this file with a backup softwarre like Easy2Sync?

    I have a small LabVIEW program which writes random numbers very fast into a ASCII-file. I want that file to be copied to a new position every 10 min. Therefor I use a backup/synchronisation software which is doing a copy operation every 10 min. It works fine a certian amount of time and after a while I get either an LabVIEW error (LabVIEW: Fiel already open: NI-488 Comand requieres GPIB Controller to be System controller) or an backup-software error (couldn´t open file...whatever). I´m guessing, it has something to do with file-access but I don´t know why?!? If I run the LabVIEW program and I copy and paste the random-number-file with the windows explorer very fast (pressing ctrl+v rapidly) while LabVIEW is still writing into this file, no error appears. Can sombody help me?
    LabVIEW 2011

    Hi Serdj,
    you don't get a GPIB error, the error number has just 2 different explanations...
    Well, you have two programs accessing the same file. One program just wants to make a copy, the other (LabView) is trying to write to the file. When copying a file that is written to you get inconsistent results! That's why one of both programs is complaining an error...
    You can't have write and read access at the same time! (But you can have more than one read access at the same time...)
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How do I open multiple Firefox home pages? I want all of my different Firefox email accounts open at the same time. I recently upgraded to Win7 and now I have to close and open Firefox to access another email acount!

    I want 3 separate, distinct Firefox home pages for each of my 3 email accounts to be open at the same time.

    Questions are typically followed by a question mark. My answer answered your question.
    Firefox doesn't do email, so there are no "Firefox email accounts". If you are accessing "email" with Firefox, you are using web mail. Some web mail services don't allow for direct access, they want their users to access their email from a "portal" or "main" page and will re-direct any attempt to load an "internal" web site page back to the main page.
    As far as loading 3 different web mail accounts at the same time, if they are in the same domain it won't work on Firefox without a Firefox addon. http://br.mozdev.org/multifox/
    IOW, if those three email accounts all with Yahoo, without that add-on you would have to logon to each email account separately and log out of the first before logging into the 2nd. Then log out of the 2nd before logging into the 3rd. Firefox isn't capable of having multiple session cookies for simultaneous logon's to the same server. That add-on provides that "multiple sessions cookies" feature.

  • I've turned off home-sharing but remote still controls computer and itunes at the same time as the TV. What gives?!

    I've turned off both home sharing and turned off the link from my computer to my remote via AppleTV but when I hit play on my remote to control appleTV, my itunes always opens and starts playing on my Macbook Pro. Has this happened to ahyone else? I cannot get it to stop. The only solution right now is to completely turn off my computer if I want to use appleTV.
    Thanks

    default then remotes control all devices unless you bind it to a device you do that in settings
    and home sharing don't have any impact on remotes

  • Customer statements - Email & print at the same time - Is this possible?

    Hi all,
    We generate customer statements at regular intervals and send them to the customers, through mail, fax and email.
    We have a print program which generates the customer statement. For some customers we want the statements to be printed as well as sent by e-mail simultaneously.
    Can anyone please let me know which field, can we use to tell the system to look at if it has to only print / email / email & print.
    We thought of using Bank statement field in the correspondence tab (KNB1-XAUSZ).
    We created 4 values,
    A - print
    B - Email
    C - print & email
    D - Fax
    However when we use 'C' the print program only sends the email, without printing.
    Can anyone please let me know if I am using the wrong field? Is there any other field that can be used for our requirement.
    Thanks in advance.
    Krishna

    Hi,
    I know it is an old thread. Just to add to what Eduardo explained here, Answer for your question is, yes it is possible to control it through the selection- screen. No need for a new Z-program for this. Even if you check the OSS note 549119, it is only talking about controlling it through master data if you check the mentioned include LXFKOF01(whether Email id maintained or not)
    What we have done is, we have controlled the same through correspondence types. We copied the existing ones into new ones starting with E*. For example: SAP01 to EAP01 to denote that these are all for emails. And we check the correspondence type in BTE 2310 which is available in parameter I_BKORM-EVENT. Based on that, you either set FINAA-NACHA      = 'I' (Email) or FINAA-NACHA      = '1' (Print) or even you can include fax as well.(FINAA-NACHA      = '2').
    If you have some hard coded stuff in your forms, what you can do is, you can reset the correspondence type back to SAP01 from EAP01 by using field symbols , by changing '(RFKORD10_PDF)BKORM-EVENT'.  Make sure you use correct print program in place of RFKORD10_PDF.
    So when you run F.27 or F.62 with SAP01, it will mass print and when your run the same with EAP01, it will mass email.
    With regards,
    Gokul

  • My iPad stuck and start working after a few seconds ....I have tried the rest option( home and sleep button press at the same time) but this didn't resolve the issue ...please guide me as I don't know much about all this..

    I have tried reset option but to no avail .......

    one more try with the reset.  hold those buttopns until you see the apple logo.  ignore the red slider.  
    Then you are going to need to describe some symptoms so we can help you out.

  • If I have 2 TVs at home and want to buy 2 apple TVs to connect my current TVs, can I use 1 new iPad and then play the movies on the 2 apple TVs at the same time?

    as title...

    iWork is universal, so it will work full-res on the iPad. This is true for any app which has the plus sign symbol (in the App Store in iTunes it will say "This app is designed for iPhone and iPad".
    Matt

Maybe you are looking for

  • Cross Domain User Access for Sharepoint 2013 site collection

    Hi All, We have three Domains , one is for client machines and  AD user access purpose and second one is production environment (only some of developers has access to this domain) and third one is SharePoint environment (Because External users needs

  • Problems setting up WNA with OAS 10.1.2.0.2 and Windows 2008

    Hi, I am trying to set up WNA with an OAS 10.1.2.0.2 in a RHEL 4 platform. I have been able to configure Synchronization and Windows External Authentication following these steps: http://download.oracle.com/docs/cd/B14099_19/idmanage.1012/b14085/odip

  • Invoice Verification- Define Start Logo

    All, I am having trouble setting up a logo to seperate the different company codes for invoice verfication (MIRO). I know the configuration path. I have it linked correctly and have checked the display button, but all I in in MIRO is a bordered squar

  • ERROR in NI VI -- "niSwitch Initialize With Options.vi"

    Apparently there is an error in the niSwitch Initialize With Options.vi supplied with my PXI 2503 switch board.  I know there are new version of niSwitch, but I am using an older one with file dates of 6/29/2000. The bug is that the "IVI New Session"

  • Do I need Adobe AIR?

    Hi, When installing Premiere Pro CS4, it is suggested in the installer that Adobe AIR is installed with it. However I can see that Adobe AIR is also suggested when installing Photoshop, Dreamweaver, Flash and so on, but I have used those for years wi