This new 1080p tv sets and my 1080i Sony camera-output from FCP

I use a Sony FX1. My best capture is at 1080i or 720p.
I've recently been recording at a higher shutter speed and am getting improved footage.
I note that FCP has an output option of 1080p - 30. Is this only half as good as the new monitors can show? If I eventually want to create highest quality for playback on 1080p-60 will I need an updated camera and will FCP have to offer 1080p-60?
Since I've never viewed 1080p-60 is the - 30 vs - 60 a big issue?
Using the 1080p-30 makes for a much improved view than H264 720x480 or HDV 1080i any other settings up to this one. H264 is a GREAT file size saver but does not use near the bit rate of 1080p-30.
One other thing. When the new OS comes out with 64-bit processing, is FCP and DVDPro already ready. I have not found any specs on FCP 5.1.4 indicating it is 64-bit ready.

ensure the following are set
View>Video Playback>Firewire Apple 720x480 (NTSC or PAL - whatever is appropriate)
View>Audio Playback>Audio follows video
View>External Video>All Frames
If this isn't what you are set to do, you won't be sending video out to your recorder.
x

Similar Messages

Why can't I update any apps? When I hit update it gives me an old id. But in settings my new id is totally set and verified. How cam I make the change in App Store?

Why can't I update any apps? When I hit update it gives me an old id. But in settings my new id is totally set and verified. How cam I make the change in App Store?

App purchases are permanently tied to the ID with which they were purchased. They cannot be transferred to a new ID.
You will have to enter the password for that ID or delete the apps and re-purchase them with the new one.
~Lyssa

I synced a new 4S to iTunes and discovered not everyting was saved from my old 3G. How do I get everything off the 3G so I can sync it to my new 4S?

I synced a new 4S to iTunes and discovered not everyting was saved from my old 3G. How do I get everything off the 3G so I can sync it to my new 4S?

iPhone: Transferring information from your current iPhone to a new iPhone

Downloaded the new Ios 7 software and my email inboxes have disappeared from my home page

Downloaded the new Ios 7 software and my email inboxes have disappeared from my home page

Try a reset ...
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

Where XML and related file belong when send from FCP to Color?

Hi(Bonjour)!
Where XML and related file belong when send from FCP to Color?
I want to start a fresh project and delete all previous tests.
Michel Boissonneault

Hi(Bonjour)!
I messed up with preference for home directory.
Thank you.
Michel Boissonneault

How to create a new attribute in OID and auto-populate it during sync from AD

Hi,
I'm new to OID and we are planning to set up AD to OID sync and we need to create an extra attribute in OID that we do not have currently in AD. We need to concat 4 attributes with "." in between and populate this new attribute.
If anyone has done something like this, can you please give me the steps involved and/or any examples?
Thank you

I think you need to create a custom plugin to create the value of new attribute and populate it, may be post plugin in OID.
Java Server Plug-in Developer's Reference

PE11 import 1080i Sony Nex7 output 1080p blur

I have some footage of quick moving bicycles. Importing to project AVCHD 1920 x 1080i 60 from Nex 7. Project is full HD 1920 x 1080i 30, square pixel, upper field first. I check "always deinterlace" try to output Mp4 h264 1080p 29.97 and there is lots of motion blur.
I have exported deinterlaced, field reversed, and straight 1080p and they all pretty much look the same.
imput file is .MTS upper field first interlaced
29.97 fps
15.5 - 18 variable Mbps
CABAC / 2 Ref frames
8 bit depth
4:2:0 Chroma
running on i7 with 16gb ram
Can someone help me with settings for full HD computer play back as well as best blueray playback.for HDTV?
thanks.

bertro2013 and SG
I see nowhere that a 1080p60 source is mentioned or involved here. So, I need clarification related to SG's comment
so there is no way to keep 60p the whole way through the process if you're going to output a BluRay with menus from Premiere Elements.
For your consideration....
If you have "AVCHD 1920 x 1080i 60", you have 1920 x 1080 16:9 at 29.97 interlaced frames per second (aka 60 field per second).
The only Premiere Elements 11 project preset that I see consistent with that source is:
NTSC
AVCHD
AVCHD Full HD 1080i30
Not...
NTSC
AVCHD
AVCHD 1080p60
or
NTSC
DSLR
1080p
DSLR 1080p30 or DSLR 1080p30 @ 29.97.
As for export source...what are you aiming at...a file to playback on the computer or a burn to? Or both....Seems to be both.
a. the burn to is fixed at 1920 x 1080 16:9 @ 29.97 interlaced frames per second no matter what is on that Timeline. And, the field order would seem to be consistent from project preset to import to export...upper field first for project preset and import and upper field first for the Blu-ray disc format on Blu-ray disc. So, I would ask "what did the video (unrendered or rendered) look like on the Timeline with the project preset that I have cited above?"
b. more on the export to file saved to hard drive later...but just quick question...when you were going this route, did you have Field Options/Always Deinterlaced selected when you were at Publish+Share/Computer/AVCHD with preset MP4 H.264 1920 x 1080p30 where it would seem de-interlacing is part of the export whether or not you have the Field Option selected?
bertro2013 and SG, please review and then let me know if I have misinterpreted anything in what has been already posted.
Thanks.
ATR

I have bought iphone5 from canada.Now this iphone5 is under warranty and i found the camera problem.so can i use this warraty in india.

hello,
i have bought iphone5 form canada.now when i am taking image under bright background i found that there is brigth sopts on screen.so, how can i fix that problem?
this iphone5 is under warranty period.and now i am parmennantly in india so how can i use this warrary? this phone is factory unlock and alos i have my purches bill of 840$.

If the phone is factory unlocked you can sell it but you probably won't be able to get the warranty replacement in India.
Also, what seems to be the problem with your picture? It seems pretty normal to me, I mean you're taking a picture of the sun, of course it's going to have some glare.

Setting and getting values to the viewcontroller from component controller

Hi,
I'm having a model node in the controller and the value node int he view which are binded to the UI elements.
How to set the values in the model nodes to the value nodes in the view through setter method and get the values from the view using getter???
Could you help me in, how to call a viewController's value node in componenet controller, and set and get the values to it.
Thanks & Regards,
Suresh

Thanks Murtuza..
i have one more question regarding checkbox by group.
I have binded the texxt property of the checkbox by group to a context contribute and its type property is selected from a simple type.
In the view layout on NWDS its showing the label names which i hav given in the simple type. but when i deploy it and run it in browser its just showing only one check box. its not showing the label names.
how to get the label names, using simple types. i,m able to get it using code.
how to get it by simpletype???
thanks, suresh

Since dowloading Ios7, my ipad cannot connect to 3G and when I have no wireless or 3G connection, it closes down and reboots every 2 minutes or so. This happened in central Manchester and also on the Virgin Train from Man. to London. Totally unusable.

Since downloading IOS 702 I cannot access 3G. Also when I have no access to wireless connection my ipad closes down and reboots every couple of minutes. I was trying to raed a book on a train from Manchester to Euston and had to give up. I found that auto-lock had defaulted to 2 minutes. I changed it to never but it made no difference.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Significant quality loss and jagged diagonal lines when exporting from FCP

I've been working on this problem for several days and I'm going insane! Every time I export my movie from Final Cut, there is a significant quality loss. It is most noticeable in two ways: diagonal lines become very jagged (looking somewhat like diagonal lines in an older video game -- more a diagonal sequence of blocks); also, in some areas such as faces, the colors get a little blurry and there seems to some "pooling" of colors around the edges of the face.
I'm pretty sure the problem's not in capture: the Quicktime clips that I captured from the camera are all pristine. When I play them in Quicktime, I can blow them up several times their original size, and they maintain their sharp lines. (I also Reverse Telecined them all with Cinema Tools, if that's relevant.) I also know the problem's not just my computer monitor; when I play these movies on my external monitor and TV, they look bad too. The clips look bad after I bring them into Final Cut, and while I'm editing, but at first I figured that was because Final Cut sometimes doesn't show full resolution in the timeline. Still, when I export, the quality of the original captures just isn't there.
Some details:
Captured from 24A progressive, Sony HVR V1U HDV.
Using Final Cut 6.0.1, Compressor 3.0.1, Quicktime 7.2.0, OS 10.4.10 (all the most recent versions I believe).
I've exported in many different ways: using Compressor (and have tried a number of different settings: the DVD Best Quality 90 Minutes default Setting, as well as using a variety of bit rates from 3.0-8.0, One pass CBR, Two pass CBR, Two pass VBR, Two pass VBR best; Video Formats NTSC, HD 1440x1080...I have tried many combinations. Regardless of the size of the m2v created, the files seem to have the same problem over and over. I've also tried exporting from Final Cut as a Quicktime Movie and with Quicktime Conversion. Same result. I also tried using different compressors with my Final Cut sequence: Apple Intermediate Codec (which I used when capturing -- you have to with the Sony HVR), HDV 1080p24, HDV 1080i60, Apple Pro Res 422, H.264...
What's happening? Why is Final Cut turning my nice pristine captures into jagged foulness? What can I try that I haven't yet?

Welcome to the forums!
Unfortunately, you seem to have tried everything I can think of, and I don't have the latest versions of FCP to know if it is a bug. However, in the off chance that you haven't given this a shot:
Take a problematic 10 second section of your timeline (set in and out points) and the Export -> Quicktime (not QT Conversion) and make sure that you have it on Quality settings that you captured, and select the "Make Self Contained" box.
Look at that in Quicktime and see if it's bad. If it's not problematic, use that video file in Compressor for your render.
Hope that helps!
~Luke

Can I pass XMLnode as a input and get back XMLnode as output from a SP?

Hi,
I find implementations where XMLNode's outerxml (varchar) is passed as input and generally the XMLNode output is obtained using the ExecuteXMLreader.
is there any other way of doing this... like where the SP gets an XMLNode input and returns back an XMLNode output?
not sure if this is relevant... I am trying to use OracleAS to expose SPs as webservices... I am a .net guy got no clue on J2EE architecture... how much JAVA coding or understanding of J2EE architecture is reqd for accomplishing this?
looking fwd to your replies...
regards,
Sakthi

James, welcome to the forum.
If Shaw is a telecommunications company, I would contact their Customer Service to see what they have to say. This is a specialty connection that is better handled by the people who deal with it every day.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I have a new mac pro notebook and wish to transfer microsoft money from my PC, can this be done and how is it done? What is the equivalent app for a mac for micro money? Thanks

I have a macbook pro notebook and wish to transfer my microsoft money from my PC to the Mac.
Can it be done?
If so how?
What is the equivilant app to microsoftmoney on a mac?
Thanks
Brian marks

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

This new version is slover and It always crashes ,I dont like this version ,will it be update faster one?

I give all details in my question,This version is not better than old version

To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles
If you do not like the new UI, you can make Firefox 4 look and behave more like Firefox 3.6, for details see http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6

I have made the switch to MAC from PC and I use Sony cameras/video recorders. I used the Sony PMB program to store all photos and videos. Now I need to transfer my photos and videos over to my MAC and I do not know how to do this as PMB is not supported

I need to transfer all my photos and videos from my old PC stored in the SONY PMB program to my new fabulous MAC desktop. I do not know how I can do this. Plus for future photos/videos, how can I upload them from Sony products ?
Please help me
PS I just purchased the computer yesterday so it has the most current operating system

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Do you know where the actual photo files are located on your laptop? If so, you can transfer them to the Mac over a LAN or by saving them to an external HDD, thumb drive or burning them to a disk. Then you can import the photos to the iPhoto app that came on your new Mac.
It would be the same process for the videos, however, it would depend what type of video files they are, as to which Mac app might allow you to view them.
BTW, since your Mac is new you need to Accept the iLife apps; iPhoto, GarageBand and iMovie into your Mac App Store/iTunes account. Open the MAS, sign into you account, go to the Purchased pane and accept the apps.

This new 1080p tv sets and my 1080i Sony camera-output from FCP

Similar Messages

Maybe you are looking for