This PC does not meet the minimum requirements for this version of iTunes

Trying to update my iTunes, the installer gives the error message:
"This PC does not meet the minimum requirements for this version of iTunes"
I have gone through the procedures listed in the support section, and have completely removed all Apple software, deleted the file folders etc etc.... still no joy.
This is most annoying as I've just received my brand new iPhone 6+ and I was trying to backup my old device to iTunes so I could restore it onto the new phone and get using it today. Hacked off big time :-\

Well I've eventually managed a work-around. Ver. 11.5.1 was no good because it wasn't compatible with my iphone 5, next one wasn't compatible with my iphone 6+, eventually got 11.4 installed so I could back up my old iphone 5 to it, then restore that backup onto my iphone 6+, which then wasn't up to date with the current iOS so I had to do that before it would sync my apps.
What a ball ache.
If someone would kindly let me know when the latest iTunes works again I's appreciate it, until then I'll have to stick with what I've got.
I need to start again with my music collection, re-import everything and get it on my iphone, because I had to delete it all a few months ago when iOS updated because it didn't have enough storage space on the device! Somehow lost it all off my iTunes in the process!
TBH I've always found the Apple system hideously complicated and infuriating when it doesn't work properly. Instead of making it more and more complex it needs simplifying and making fool-proof so people don't have to go through all this BS just to use their **** phone!

Similar Messages

Your system does not meet the minimum requirement for this update (9996)

Hi
recently had to reformat my system with windows 7 profesional. All windows updates where performed and all the drivers where installed correctly except the ethernet driver. windows 7 cannot find a suitable driver. I then downloaded the driver from the link provided on the hpe-590t download site, which is described as a intel gigabyte driver sp52222, however the software driver comes up with the following message your system does not meet the minimum requirement for this update (9996). Has anyone had a similar problem.
Hardware Ids are:
PCI\VEN_8086&DEV_0000&SUBSYS_00008086&REV_00
PCI\VEN_8086&DEV_0000&SUBSYS_00008086
PCI\VEN_8086&DEV_0000&CC_020000
PCI\VEN_8086&DEV_0000&CC_0200
Regards artie

I solicited the the assistance of another one of our experts who is a driver guru, you may see his reply here:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Paul-Tikkanen/m-p/4990422#M...
I tend to agree that either the NIC is bad or possiblly a factory restore would help.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

Help. I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
I have not made any changes to my machine. Help - I can't get to my images

Try restarting your system.
If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting.

HT4007 The installed graphics card does not meet the minimum requirements for Aperture.

The installed graphics card does not meet the minimum requirements for Aperture. I have not used Aperture in a while and just got this error message. I tried applying OS updates and reinstalling Aperture and still get the same message. Does anybody have a solution or work around.

Are you using a non-standard Graphics Cards? Then this may be the reason.
You may also get this error message, if you accidentally booted into "Safe Boot Mode". Then certain extensions of the Graphics card will be disabled and Aperture cannot be launched.
Reboot and make sure that you this time will boot into regular boot mode.
See: Mac OS X: What is Safe Boot, Safe Mode?
If you are indeed running the system in Safe Mode, the question is, what made this happen? Do you use a wireless mouse and keyboard? There is a strange bug that makes Mac OS X boot into Safe mode, if you turn the wireless devices on, while the system is booting. Make sure they are active, before you boot.
But if you did not boot into Safe Mode, you could try to boot into this mode to reset the graphics card and then boot again into regular mode.
Merry Christmas!
Léonie

Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
System Requirements
Minimum
One of the following Intel-based Mac computers:
Mac Pro
MacBook Pro
MacBook
MacBook Air
iMac
Mac mini
Operating system:
Mac OS X v10.5.8 or v10.6.2 or later
Memory:
1GB of RAM
2GB of RAM required for Mac Pro
Other requirements:
DVD drive for installation
1GB of disk space for application and documentation
7GB of disk space for Sample Library

Installed graphics card does not meet the minimum requirements for AP...

2006 MP with an HD 2600 and a 7300 GT card installed, 8 GB RAM, OS 10.4.11. Tried to install Aperture v1 from CD and got the error message "The installed graphics card does not meet the minimum requirements for Aperture" which disallowed upgrading to v1.5.6 because v1 would not install. So I downloaded and installed the v2 trial and got the same error message.
The release lever on the 7300 card would not work so I left it in slot 1 for now rather than risk breaking the card. That put the HD 2600 card in slot 2, which is not optimum but I do not think it should cause problems.
23" ACD connected to the HD 2600 card.
Ideas? I perused the threads and found similar reports but no solutions.
TIA
-Allen Wicks

Answering my own question, I moved the ACD connection to the 7300 card and v2 Aperture installed OK.
Now I guess I need to get precise details on how to eject the 7300 card (mainly better directions than Apple's as to exactly what direction to force the release lever toward). I applied way more force than I am accustomed to and the card did not release.
Comments appreciated, TIA.
-Allen Wicks

My PC (XP, 2 GHz Celeron, 768 M ram) does not meet the minimum requirements for upgrade to version 6, so how can I stop Firefox from nagging me to upgrade?

I would LIKE to install version 6, but since my machine (XP, 2 GHz Celeron, 768 M ram) does not meet the system requirements there is no reason to continue the annoying nag screens.

I would LIKE to install version 6, but since my machine (XP, 2 GHz Celeron, 768 M ram) does not meet the system requirements there is no reason to continue the annoying nag screens.

This computer does not meet the minimum requirements

Hi,
When I try to install the VGA driver for HD4000 (Z77A-G45, i7 3770) it shows me the message in the title. How can I solve this?
Thanks

Are you using any external video card? You usually see this message when onboard video is disabled in BIOS.
If you are using an external video card, check if onboard video is enabled in BIOS. As soon as you have it enabled, you should be able to install the drivers.

This computer does not meet the minimum requirements? (Intel HD 4600)

Hello,
I recently built a new rig with Intel 4670k processor, MSI Z87-G43 Gaming, MSI Twin Frozr R9-280x.
Now, I am trying to install the onboard graphics for the 4670k by trying to enable it in the bios but it just boot loops.

Quote from: PirateDog on 10-November-13, 00:44:19
The moderator is not saying the CPU is installed incorrectly, he is pointing you in the direction that a CPU socket pin or pins may be bent and not making proper contact. And yes, the system can still work with bent pin(s), but not fully functional. Most common is memory channels or slots not working, but there are cases of bent pin(s) affecting graphics as well.
Ah yes, I apologize for my assumption. I will check it once again. Thank you guys for the advise.

Error: The installed graphics card does not meet the minimum requirements for Aperture.

I have been using Aperture for nearly 5 years on my MAC Book Pro. I suddenly am getting this message and Aperture will not launch. Any ideas?
This is my graphics
NVIDIA GeForce 9400M:
Chipset Model:    NVIDIA GeForce 9400M
Type:    GPU
Bus:    PCI
VRAM (Total):    256 MB
Vendor:    NVIDIA (0x10de)
Device ID:    0x0863
Revision ID:    0x00b1
ROM Revision:    3427
Displays:
Color LCD:
Resolution:    1280 x 800
Pixel Depth:    32-Bit Color (ARGB8888)
Main Display:    Yes
Mirror:    Off
Online:    Yes
Built-In:    Yes
Display Connector:
Status:    No Display Connected

There are actually two graphic cards in the system, the one you show in your post and one part of the motherboard.
This is done on laptops to help save battery, when the system does need need high performance graphics, when it is doing text it uses the integrated graphics card, when it needs to do high performance graphics like when running Aperture it switches to the other card.
It is possible something is wrong with your system preventing it from switching. What OS version are you running, is it really 10.6.4?
See MacBook Pro: How to determine which graphics processor is in use to determine which GPU is in use. But if it is not switching you most likely have a hardware problem.

Cannot access ADP payroll Our systems have detected that your internet browser version does not meet the minimum requirements for the ADP EasyPayNet payroll application.

Not recognized carrier
need to access to process company payroll

Is this the complete message that your are seeing? https://easynet.adp.com/net5/badBrowser.html
If so, read the second paragraph. They may only support IE; if so, that is ADPs choice.
Have you contacted "your ADP service center" per the message that you posted under More Information?
You '''''may''''' be able to access the site using Firefox by opening IE in a Firefox tab using the following extension. For safety, using this extension or IE directly, you must have the most current version of IE for system and keep it updated.
*http://coralietab.mozdev.org/installation.html

New iMac Intel - Hardware Does Not Meet the Minimum Requirements?

When attempting to load Apeture I get a window pop up during the loading phase that states
" Your computer hardware does not meet the minimum requirements for Apeture?"
Any idea what this may be from. I have the new 17inch iMac with Intel processor and it worked before?
Help woudl be greatly appreciated. This is my first Mac. I switched from a P.C. I have no idea how to even trouble shoot challenges as of yet.
Thanks

Hi, and welcome to the Mac.
Aperture doesn't yet run on Intel hardware. A new version should be available in March, according to a blurb in the lower right corner of this page:
http://www.apple.com/aperture/

RCU-6002:The specified database does not meet the minimum requirement to

I did all that is neccessary to let RCU to run but met the issues below. Really,this is not so good for me.pls has anyone a solution to this?
RCU-6002:The specified database does not meet the minimum requirement to load metadata repository.
RCU-6080:Global prerequisite check failed - Check requirement for specified database
The database you are connecting is not a supported version. Enter Database with version equal to or higher than 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 in 11g. Refer to the certification matrix for supported DB versions
Mcdonald gabriel

Hi Dear,
You need install the database version 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 with the database character set AL32UTF8.
Best of Luck

I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. Tis does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. This does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

Luis Sequeira1 wrote:
I have run things that are unsupported too (like 10.3 Panther on a Wallstreet Powerbook, anyone remember those? )
Hey Luis. I not only remember…I still have mine (OS 9)! Works perfectly well…for some things; just need to be selective about what I ask it to do. (Also have its big brother Pismo running Tiger, which is still an extremely competent machine.) When I take them out of their cases, I'm still amazed at the G3's build quality.
Russ

Does not meet the system requirement for installing BB App World

I bought a Curve 8520 in Singapore yesterday. When i tried to download App world into this phone, it says "my phone does not meet the system requirement for the software". does it refer to hardware specification or the BB O/s version on the phone. How can fix it because being able to use App world is one of the purposes that i buy a BB.
Also, How about MS Live Messenger , facebook ? Do I need to install them seperately through App World?
Please help!

Hi there!
Please see these links for reference:
http://na.blackberry.com/eng/services/appworld/download.jsp#tab_tab_system_requirements
http://www.blackberry.com/app_includes/devicesoftware/appworld/appworld_availability_en.html
A key component in accessing AppWorld is your carrier -- if they are not delivering it, then you can't get it. If you don't have an adequate plan from them that incudes it, then you can't get it. Hence, if you meet the hardware requirements AND it is available in your country, then you need to contact your carrier to find out how you can get it via their network.
All that said, AppWorld is merely a storefront, vending apps developed by others...there are many other storefronts available that don't have the same restrictions.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

This PC does not meet the minimum requirements for this version of iTunes

Similar Messages

Maybe you are looking for