This problem appears while installing oracle 10g on enterprise linux

Hi All,
While installing oracle 10g on enterprise linux 5 this message apear:
http://img134.imageshack.us/my.php?image=problemqy2.png
More Info:
Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to countinue setup but the above error appears, also I tried this configuration on SuSE 10 I changed the SuSE-release to 9 and went good.

The packeges are already installedIf you execute runInstaller again is the error message the same as before?
If yes can you post output for this command?
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|grep -i 'libxp'

Similar Messages

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Installing Oracle 10g in Enterprise Linux 4

Hi friends,
I dont know how to install oracle 10g express edition in Enterprise linux 4.
Am new to linux environment.
And i have downloaded the rpm file from oracle website.
Please help me...
thanks in advance....

Hi Sunil
Please find the below link
http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html
you can install by these steps.
Regards
Khan

Having problems in ocfs2 while installing oracle 10g rac on linux as 4

this is the frist time i am try to install oracle rac based on three PCs after installing ocfs2 when i try to configure nodes through console i see the following msg "Could not start cluster stack .this must be resolved before any OCFS2 file system can be mounted "

Please check the user guide
http://oss.oracle.com/projects/ocfs2/dist/documentation/01-cluster_start_stop.pdf
Regards
Jason

Installing Oracle 10g on Enterprise Linux 4 Update 5 Media Pack for x86_64

Hello everyone,
I'm trying to determine whether the required rpm packages are installed on the new EL 4, and it seems after running the query using the # rpm -q there are packages missing.
According to the install section from the Doc Library these packages must exist in Red Hat Enterprise Linux 4.0 for 10g to install successfully. My guess is, if RHEL 4 needs to have it, then Oracles Unbreakable should too... right?
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
Has anyone had experience doing such an installation, and if so, what exactly is missing from Oracle's EL4 and where can I get it.

Thanks Terry and Jason for your responses. I've come along on this install but ran into a little snag. Hope you two and other members can help. Here's my output from the xterm:
[root@localhost database]# ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system versions: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /u01/tmp/OraInstall2007-05-22_10-52-09PM. Please wait ...
The user is root. Oracle Universal Installer cannot continue installion if the user is root.
: No such file or directory
[root@localhost database]#
I don't know what to do, and weren't able to run it as user_oracle. Could you make a recommendation on how to resolve this error? Also, will I also need to make any clean-up efforts before beginning a new install?
Many thanks.

"Error In Writing to directory ..." getting the error while installing oracle 10g in laptop

Hi
I thought I'd make my first post a hijack of a vaguely related thread,
then some kind moderator could separate it out and branch it off to a post of its own.
I'm not even sure this is in the proper forum.
But anyhow ...
i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
so please tell me the solution as soon as possible
thanks,
arshad ayub

Try the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

Error while installing oracle 10g on centos 5.6 32 Bit

Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.

satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail.

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error while installing oracle 10g in redhat Server

Hi experts,
I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
when Try to start the listener the following error comes.
Tns-12537:TNS:Connection closed
Tns-12560:TNS:PROTOCOL ADAPTER ERROR
Tns-00507:TNS:Connection closed
Linux error 29:illegal Seek.
Please help me

Thanks for the answer it was helpful and i successfully started the oracle database.
and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
imp userid=username/password@servicename file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Can you install Oracle 10g on REDHAT LINUX ENTERPRISE WS?

According to oracle documentation, it says you can install oracle10g on Redhat enterprise version 3 or 4, but it doesn't specify whether its Red Hat Enterprise Linux AS or WS. Can you install oracle 10g on Rehat Linux Enterprise WS?

Oracle Certificaction Matrices says only RedHat AS/ES is supported for database. AFAIK WS means workstation.
Also this link is very clear: http://kbase.redhat.com/faq/FAQ_61_1135.shtm
Besides the above sentences... If the WS installation is providing all required packages (listed in installtion prerequisites) I belive that Oracle DB could be installed on WS but as I (and the above link) said it is not officialy supported.

Error while download oracle 10g release2 for linux x-86

Hi,
I got errors while downloading oracle 10g r2 for linux x-86 from
http://www.oracle.com/technology/software/products/database/index.html
i got htis error:
source file not found
contact administrator.
how do i download?

Works for me in western Canada right now.
You might want to try again, and if it still happens try clearing your browser cache and cookies.

Problem in Installing oracle 11g in enterprise linux

Hello all,
Iam new to linux and oracle .... I had downloaded enterprise linux from oraclewebsite, My question is i was not able to install oracle 11g in enterprise linux...
And when i am trying to install ./runInstaller
iam getting error message (permission denied).
is that necessary to install oracle vm server or manager .. if so how to do it .. Please give me clear idea how and where to start..

Hi,
The error message which iam getting is
[root@Karthik database]# ls -la
total 48
drwxr-xr-x 8 root root 4096 Sep 10 15:42 .
drwxr-xr-x 3 root root 4096 Sep 10 15:40 ..
drwxr-xr-x 12 root root 4096 Sep 10 15:42 doc
drwxr-xr-x 4 root root 4096 Sep 10 15:42 install
drwxr-xr-x 2 root root 4096 Sep 10 15:42 response
drwxr-xr-x 2 root root 4096 Sep 10 15:42 rpm
-rwxrwxrwx 1 root root 4352 Aug 13 23:56 runInstaller
drwxr-xr-x 2 root root 4096 Sep 10 15:42 sshsetup
drwxr-xr-x 14 root root 4096 Sep 10 15:46 stage
-rw-r--r-- 1 root root 5400 Aug 17 12:25 welcome.html
[root@Karthik database]# ./runInstaller
./runInstaller: line 137: /root/Desktop/linux_11gR2_database_1of2/database/install/.oui: Permission denied
The command
bash ./runInstaller.sh didnt helped. again got the error of bash: ./runInstaller.sh: No such file or directory
Thanks,
karthik

Display Problem while installing Oracle 10g on RHEL 5

All,
I'm in the process of installing Oracle 10g R2 on RHEL4, when i'm trying to issue ./runInstaller i'm getting the below error.
I could get the xclock on the host, even then i'm getting below display error, could any one please help me to resolve this ?
e@dhcppc6 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-18_02-21-10PM. Please wait ...[oracle@dhcppc6 database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
[oracle@dhcppc6 database]$

export DISPLAY=<hostname>:0
Are you running from the same terminal or connecting remotely?
If connecting remotely, you need a Xserver running on the client machine.

This problem appears while installing oracle 10g on enterprise linux

Similar Messages

Maybe you are looking for