This region cannot be rendered at design time
hi i have created a method call for createInsert in my bounded task flow,i drag and drop my data control createInsert to my task flow and make it a default activity,but when i go to my jspx page is showing the error ,This region cannot be rendered at design time,am in jdeveloper 11.1.1.6.0
i what to Set inputtext in insert mode ,when the page load,this is what amtrying to do
http://docs.oracle.com/cd/E12839_01/web.1111/b31974/web_form.htm#CACECCJA
Edited by: adf0994 on 2012/11/22 10:17 AM
did you see this post? Re: Jsf page not rendering in Jdeveloper
i had a similar problem, but not sure if it is the same. Frank mentioned something about mixing facelets and jspx pages, but did not elaborate. someone else mentioned to comment out some xml...
Similar Messages
-
This image cannot be rendered for editing because Aperture does not support
Editing Error: This image cannot be rendered for editing because Aperture does not support the image format.
I have been having this issue when trying to open photos in CS4. It only seems to be affecting images from the last year or so, although I'm using the same cameras (Canon 7D, 5D, and S90) as before. My library is large, going back to year 2000, and all the older images seem to work fine, but most all of the recent files display this error when trying to open them is CS4. I've tried the methods described in other threads and on the support website, namely starting aperture while holding option and command, pulling up the options to rebuild the library in various ways. I've done all three options, the last two twice, with no change. This is very frustrating to not be able to use the program in the way I had planned... Any ideas? I'm wondering if my library is simply too large- although I'm not sure if breaking the library into smaller chunks is the best way to go. I prefer having all my photos together. I have found that iMovie fails to operate properly when events get too large. Is this a similar problem?Again, thanks for the input. As for the first suggestion, when I import without renaming they all work, but as of late, all appear to work no problem. It seems like it was a block of time from roughly October 2009 through November 2010 where most all the files imported during this date demonstrate the problem. As for the second suggestion, I've tried both 8 and 16 bit TIFF and PSD file types selected in the editor preferences, with no luck.
My next move has been to relocate the offending files out of their current location to another location (they are referenced, not managed). In doing this, I encountered what seems to be a file access or privelege error message, although about 20% of the files were moved, and in doing so, it seems to have solved the problem for those. But I don't have a good way of isolating the involved images outside of Aperture, and I don't want to move them with Finder anyways since that would ruin the referencing.
This bug is getting so complicated I'm ready to throw my hands in the air and just go back to Lightroom. Aperture has so much potential, especially in regards to integration with ipods, iPads, other Macs, etc. but in the 4 months I've been using it, I have spent WAY more time addressing buggy issues like this one than the amount of time supposedly saved using Aperture instead of Lightroom. -
Editing Error - This Image cannot be rendered for editing...
Editing Error - This Image cannot be rendered for editingbecause Aperture doesn't support the image format.
Thats the message that appears when I'm exporting to Photoshop CS5 (I tried CS4 too), or even other Plug-ins such as Silver Efex Pro...
That had never happened before, and I use Aperture for over 2 years.
Its RAW image format from the same camera and all, nothing has changed. just randomly decided not to export anymore to other programs, Regular exporting works, so it's nothing to do with exporting it self, but the communication between aperture and other softwares, I think.
I've seen some other people having the same problem, does anyone have a take on it, in how to solve this? I can't edit anymore outside of aperture. (of course not including the idea of exporting and doing everything away from aperture, which is totally not viable with the amount of content to be edited and not being in aperture anymore.)
I've tried deleting the preferences, tried repair permissions of the Library, and still didn't work.
Didn't go to the other 2 options (repair and rebuild database) because it would take days if chosen, and still not sure that would solve. or if has anything to do with.
Any light anyone?What kind of file is it? (i.e.jpeg, Canon RAW, Nikon RAW etc..)
As a workaround until you get the issue fixed, why not reimport the image from the original file, lift and stamp any adjustments you've made in Aperture, and see if the same problem occurs?
A -
Image cannot be rendered because Aperture does not support image format
Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One -
Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
After exhausting SAP note searches and the SDN community forums, blogs & wiki searches, I decide to make my first SDN post:
After installing Enhancement Pack 3 to the base ECC 6.0, we got the Design Time for Processes & Forms node in the IMG under HR Administrative Services. I was able to get in to it the very first time without any issues; however once I selected one of the sample SAP processes, I received an "Assertion_Failed" dump in the section of code saying a referenced node must exist. In debugging, we did see a node that is referencing a node that does not exist, which is causing the dump. The dump occurs in CL_HRASR00_DT_OBJECT_BROWSER, Method ASSERT_OBJ_HIER_IS_CONSISTENT (line 71).
I now get this dump each time I try to execute the Design Time for Processes & Forms node in the IMG. Note: when accessing process the old way, there is no issue.
To me is seems like either EP3 was not installed completely, something went wrong in the activation of those business functions, or the copy of the sample forms from client 000 did not grab everything. In debugging, it appears that the missing reference node is related to some form scenario node. Also note that all the steps under Technical Settings were completed.
Has anyone seen this issue before?
Thanks for any help you can give. If I find the solution, I will post the answer here as well.
-Jeff Glynn
Edited by: Jeffrey Glynn on Oct 22, 2008 1:54 AMHi Jeff,
I believe we had the same issue here.
There is an SAP Note (below) for this. Please let me know if this works.
Note 1075650 - New Design Time tool Corrections for the dump
Note Language: English Version: 1 Validity: Valid from 18.07.2007
Summary
Symptom
Dump on executing the transaction HRASR_DT which starts the new design time
tool of the HR Administrative services
More Terms
Design time tool HRASR_DT HRadmin
Cause and Prerequisites
Solution
The solution to the dump occuring would be resolved by applying the SP
Alternately the dump can be
resolved by performing the following steps manually :
1.Start SE16 transaction
2.Give the table name as T5ASRDTOBJHIER and press RETURN key
3.Execute the Selection screen by pressing on F8 Key
4.Select the following entries:
i. OBJECT TYPE = PROCESS and NODE TYPE = PROC_REF_FSCN_DIRECT
ii.OBJECT TYPE = PROCESS and NODE TYPE = PROC_REF_FSCN_DIRECT_START
5. Click on EDIT entries button on the header
6. Enter in the field REF_OBJECT_TYPE the value as FORM_SCENARIO
7. Click on the Next button on the header bar to navigate to the next entry
8. Repeat Step 6 for this entry also
9. Save the modification
Additionaly, perform the following steps as well:
1.Start SE16 transaction
2.Give the table name as T5ASRDTTOOLS and press RETURN key
3.Execute the Selection screen by pressing on F8 Key
4.Click on CREATE entry button on the header
5.Enter the following to create a new entry:
TOOL TYPE = FSCN_MSG_MAPPER
OPERATION = DISPEDIT
TOOL CLASSNAME = CL_HRASR00_DT_FST_MESSAGE_MAP
6. Enter the following to create a new entry:
TOOL TYPE = PROC_EXEC_FREQUENCY
OPERATION = DISPEDIT
TOOL CLASSNAME = CL_HRASR00_DT_PRT_EXEC_FREQ
7. Save the new entries
These adjustments should resolve the dumps hindering to start the new
design time tool -
Possible Fix for Frequent "This game cannot be played" Errors
I was seeing the error, "This game cannot be played," almost every time I tried to start a game on my 30GB iPod. The game would always eventually start fine on the second or third try, though.
I was just living with the error and figured it was a bug Apple would eventually work out. Then it occured to me one day that I'd neglected the fact that the iPod is, in part, a glorified hard disk. Maybe it needed some TLC.
So, I used DiskWarrior 4 to rebuild/repair it and the error has not appeared once since. It's been about four or five days.
Just thought others out there might have been having the same problem...I also had this problem, and since I don't want to shell out $100 for DiskWarrior nor do I wish to do a restore (I manually manage my songs, photos, videos, etc.), I found that resyncing the games from within iTunes (on a Mac) is viable as well.
1. Select your iPod to bring up the overview/management window.
2. Select the games tab.
3. Enable the "Sync games" checkbox.
4. Select "Sync [Your iPod]" from the "File" menu OR right click on your iPod in the iTunes Devices list and select "Sync."
iMac DV 500Mhz, 12" PB G4 867Mhz, Dual 2.3Ghz PM, 20" 2Ghz Core Duo 2 iMac Mac OS X (10.4.8) -
ADF 12c Rendering Problems at design time
Hi all,
I am experimenting the following unexpected rendering problems at Design time with JDEV 12c:
- Sometimes a complete page is showed empty or blank but the components exists on the page (you can see them in the structure panel) and the page has no warnings.
- Sometimes I cannot click a component because it is behind the container.
- Sometimes the containers are rendered in other place on the page.
- Sometimes the containers not stretching
I remember some posts about this problem in 11.1.2.x but I think it was not fixed in 12c. For this reason, I have some questions:
What is the "real" memory requirement of Jdev 12c to avoid render problems?
What is the best configuration in jdev.conf?
Is it only a memory issue or Is it also a dependency reference problem? According to a blog post of Frank Nimphius:
Though with Oracle JDeveloper 11g the problem of the IDE not rendering JSF pages properly in the visual editor has become rare, there always is a way for the creative to break IDE functionality. A possible reason for the visual editor in JDeveloper to break is a failed dependency reference, which often is in a custom JSF PhaseListener configured in the faces-config.xml file. To avoid this from happening, surround the code in your PhaseListener class with the following statement (for example in the afterPhase method)
public void afterPhase(PhaseEvent phaseEvent) { if(!ADFContext.getCurrent().isDesigntime()){ ... listener code here ... } }
The reason why the visual editor in Oracle JDeveloper fails rendering the WYSIWYG view has to do with how the live preview is created. To produce the visual display of a view, JDeveloper actually runs the ADF Faces view in JSF, which then also invokes defined PhaseListeners. With the code above, you check whether the PhaseListener code is executed at runtime or design time.If it is executed in design time, you ignore all calls to external resources that are not available at design time.
source:
https://blogs.oracle.com/jdevotnharvest/entry/when_jdeveloper_ide_doesn_t
if it is a known problem, then Why is not fixed in 12c?
Jhon
Jdev 12cJhon, what Frank mentioned can't be fixed from the outside. You or the developers who use phase listens without thinking about the design view are the ones to fix this. Frank provided you with the solution for this.
However, we don't know if you use any self written phase listener. If you don't do this you have another problem. I do see some of your symptoms but can't reproduce them at the moment. As long as we can't reproduce the problem somehow it's difficult to to get a solution.
My advise is to keep your eyes open (add I do) and whenever you can reproduce this behaviour come back and tell us about it. It's hard or impossible to give the 'best' settings for Jdev.conf as they depend on other factors e.g. operating system, memory, other applications running at the same time and many more.
Personally I don't change the parameters as long as I can't put the problems to low memory (which I can't at the moment).
Timo -
This workflow cannot be imported because it was created in SharePoint Designer for a different Site
Hello everyone. I am getting this error when attempting to move minor workflow changes from mirror SharePoint development / production environments and hoping someone can help me.
"This workflow cannot be imported because it was created in SharePoint Designer for a different site, or the original workflow has been moved or deleted. To move a workflow between sites, use Save as Template (.wsp file) instead of a Visio workflow
drawing."
So basically I have taken an image of our single SharePoint server, Domain Controller, and a client and restored them to an OFFLINE development environment for the testing of workflow changes prior to production. I've put quite a bit of time into one
particularly and would like to export/import rather than re-created from scratch.
I've successfully created the form template and imported. This created the necessary list items nicely and the form appears to work as expected. However, when attempting to import the .VWI file exported from dev SharePoint, I am getting the above
error. If I change the .VWI to .zip and remove the "workflow.xoml.wfconfig.xml" file, then re-zip and change the file extension back to .VWI I get a dialog that allows me to import, but I have to choose a new name and much of the related content
is lost. I need to be able to overwrite/merge the existing workflow with the import. Any suggestions?
One strange thing I ran into was during a test of an export/import from and to the exact same environment. If I simply export to .VWI, then import from .VWI with no changes, SAME everything I still get this error. Very weird. Hoping someone can shed some
light on the subject. Thank you.
Adam TylerHi Adam,
Here is a blog talk about the same issue would be helpful:
http://techiescode.blogspot.com/2014/09/copymove-sharepoint-2010-designer.html
Best Regards
Dennis Guo
TechNet Community Support -
Layout Editor is not rendering widgets during Design time
Hi,
I am new in ADF development and my page has suddenly stop rendering in Design Tab. Initially, when I was running unbounded task flow, it is just showing a blank page.
Can anybody help me in resolving this issue? I have seen Franks note on PhaseListener. I would appreciate if some one can guide me with the detailed class and how to create the same.
ParvezHi Timo,
Sorry for the late response and not specifying more in detail.
My Jdeveloper version is 11.1.1.6 R1. When I ran for the first time, it was working fine. Then later on, when I was running it was opening completely blank screen.
I thought it is something to do with the permission to the task flow. I have opened web.xml and jazn-data.xml file to check and closed without tweaking these files.
Now, I was not able to open the page in the designer also. It was just showing hierarchy of all the components.
I copied the backup again and it worked. What could be the reason so that I can avoid doing this in future?
Is this related to Jdeveloper bug as I have seen on other forums highlighting this issue. -
What's this Error in design time
I have received a error in design time that says:
Value cannot be null. Parameter name: objectType
This occurs when i open the form in desin mode or when I add or remove a handle in code editor and then switch to design form.
Can you help me
Hello,
I am moving your thread/question to a forum dedicated to forms.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. -
Question on PG design-time web bean: rendered false
Is there a rule or documentation on the behavior of web beans in PG when design-time property rendered is set to False?
Bean instance is unpredictable when using findChildRecursive method of OAWebBean.
Use Case:
Update is needed on an existing page. We want this new item to display only on specific scenario.
public void processRequest(final OAPageContext pageContext, final OAWebBean webBean) {
final boolean metCriteria = true;
if (metCriteria) {
final OAWebBean bean = (OAWebBean)webBean.findChildRecursive("BeanId"); //alas! bean can be null!
bean.setRendered(true);
}Workaround is do it negatively w/c is a little inconvenient. Set design-time render to true, and do setRendered(false) in PR when new scenario criteria is not met. You want rendered property to be false by default so you are a little sure that original behavior is not affected.
public void processRequest(final OAPageContext pageContext, final OAWebBean webBean) {
final boolean metCriteria = false;
if (!metCriteria) {
final OAWebBean bean = (OAWebBean)webBean.findChildRecursive("BeanId");//Bean is never null.
bean.setRendered(false);
}Any ideas?Hi
Better to segregate the EJB's and put it in seperate controller keep atmost 30 in one controller (you have around 3-4 component ). Any component which is going to use in other component is basically based on create on demand priniciple automatically by framework.
or
as given in point third create a component , with say 8-10 Custom Controller implement the all the methods and put a same method signature in Component Controller, call the same through interface thats it.
Best Regards
Satish Kumar -
I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?
Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.
-
"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!
lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that -
On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.Try Here > AMDS > http://support.apple.com/kb/TS1567
-
i keep getting a message when i try to synch my iphone "This iphone cannot be used because the Apple Mobile Device service is not started" I have synched this phone with this computer many times before with no problems. Can anyone please shed any light on how to fix this? thx
See Here
http://support.apple.com/kb/TS1567
Maybe you are looking for
-
Remote App still not working correctly!
Well since theres been numerous updates for ATV3 and the Remote App since my last post in November https://discussions.apple.com/thread/4357665?start=0&tstart=0 I decided to try the newsest updates and see if the issue is fixed...Of course its not! S
-
Is there a way to transfer music from an album onto your iPhone?
So, I bought an album from HMV, and I want to transfer that onto my computer, but I was wondering if there was a way to then transfer this music onto my iPhone, instead of downloading the album from iTunes?
-
Does anyone know how to configure Dreamweaver CS3 to show CF8 help when I hit F1 while I have a CF tag highlighted? Thanks so much for any help. A.J.cfm
-
Create RAC Database Connection in Sql Developer
Hi All, Can you please let me know how to create a new connection for a RAC Database. When we use the scan IP and service name, it always displays the network adapter could not establish the connection, even though the listener and database are up an
-
i'm having issues with reinstalling my itunes.it says that my apple mobile device faild to start and will not go any further