This site has screwed up my username. How do I correct it?

Once established, name does not change.
But you can abandon the old one to non-use and make one that you want. Usually when someone has points they do not want to abandon it causes issues, but you have 0 points, so are leaving nothing behind.

Similar Messages

Message "this site has sent a non-secure certifica...

I use MFE 2.53 to synchronise on Nokia E61 / 61i.
Each time a receive an email i have to validate this message "this site has sent a non-secure certificate" in MFE.
Is there a problem on my Exchange server configuration ( certificate ..) or on the mobile configuration ?

So the certificate installed correctly (meaning you got prompted for the uses and now and you can see it on the list of certificates in the Security settings)? Can't give exact instructions to find this since it depends on device.
When you say "it's not ok", what do you mean? What is the new behavior since you installed the certificate?

OT: At last! This site has gone live....

http://www.neapco.com
It's been in development for ~8 months. Because of the way it
was managed
internally, this development cycle has been an absolute
dream, even though
it's been a long and detailed one. The internal contact (an
incredibly busy
person) was generous with his intellectual bandwidth, and was
fully
committed to getting the site finished. I must say, I like
this site as
much as any I have done....
(forgive my egotistical chest-thump)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================

Ha - now my profile shows up!
Shane H
[email protected]
http://www.avenuedesigners.com
===============================
Proud GAWDS Member
http://www.gawds.org
Delivering accessible websites to all ...
===============================
"Shane H" <[email protected]> wrote in
message
news:[email protected]...
> Not too sure - haha. But they haven't posted my profile
yet...grrr!
>
> --
> Shane H
> [email protected]
>
http://www.avenuedesigners.com
>
> ===============================
> Proud GAWDS Member
>
http://www.gawds.org
>
> Delivering accessible websites to all ...
> ===============================
>
>
> "Nancy *Adobe Community Expert*"
<[email protected]> wrote in message
> news:[email protected]...
>>I realize that now. Looked at the web site.
>>
>> I just had one question .. why didn't Thierry send
in a picture? lol
>>
>>
>> --
>> Nancy Gill
>> Adobe Community Expert
>> BLOG:
http://www.dmxwishes.com/blog.asp
>> Author: Dreamweaver 8 e-book for the DMX Zone
>> Co-Author: Dreamweaver MX: Instant Troubleshooter
(August, 2003)
>> Technical Editor: DMX 2004: The Complete Reference,
DMX 2004: A
>> Beginner's
>> Guide, Mastering Macromedia Contribute
>> Technical Reviewer: Dynamic Dreamweaver MX/DMX:
Advanced PHP Web
>> Development
>>
>>
>> "Shane H" <[email protected]>
wrote in message
>> news:[email protected]...
>>> Of course we are real.
>>>
>>> --
>>> Shane H
>>> [email protected]
>>>
http://www.avenuedesigners.com
>>>
>>> ===============================
>>> Proud GAWDS Member
>>>
http://www.gawds.org
>>>
>>> Delivering accessible websites to all ...
>>> ===============================
>>>
>>>
>>> "darrel" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>>> Especially now that the real GAWD has
arrived (psst .. is that a real
>>>>> group?
>>>>
>>>> Oddly enough, it is:
>>>>
>>>>
http://www.gawds.org/
>>>>
>>>> Nice concept, insanely goofy acronym.
>>>>
>>>> -Darrel
>>>>
>>>
>>>
>>
>>
>
>

HP Laserjet Pro P1102W has lost wireless signal. How do I correct this?

I have 8 computers using this printer. It worked for several weeks but has lost the signal. The router is in the same room and is strong.

Hi there mte,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system is this?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Firefox3.6.8 and earlier, scrolls automatically at some sites. unable to stop it immediately. how do i correct this?

Bismillaah. Peace. Earlier versions of firefox to the present version 3.6.8 have a tendency to automatically scroll from the top of the page to the bottom, and then up to the top again, repeatedly. Hitting the up or down arrow repeatedly will sometimes halt the direction of the scroll but it is not reliable.
How is this problem corrected? Abdul
Ubuntu 9.04 - 15GB drive - 1000Mb RAM - Pent. 4 CPU 2.40 GHz - 2.6.28.19 Linux Kernel

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I delete an Init load, how can i correct it

Hi all,
i deleted an Init load for a mistake, now this cube has a lot of data, how can i correct this mistake?

Hello Jorge,
it depends upon what is the data source.
If the source is an DSO then just do an init without data transfer and thats all.
If the source is an R/3 data source then you may have to do a new init without data transfer and then you can load the historical data through Full repair loads based on a selection which you think should cover the delta lost for that particular day.
Since its a cube thereore first you should do a selective deletion from the cube for the same selections which you use to do full repair in the cube.
Thanks
Ajeet

How was this site made. Need HELP!

Hi everyone
It's the first time I post here, so I hope some will understand my problem.
I recently came upon this site http://weightshift.com and loved how they had made it dynamic or I think liquid. No mater how much it is scaled it looks great. It can be viewed on an iPhone, perfectly fitting the screen. Also when the site is scaled down and reaches a certain size, the logo jumps above the Contact and about buttons.
I am currently studying at TAFE for Cert. IV and my dreamweaver teacher has no clue. So I have to figure it out by myself.
Does anyone have any clue how this could be achieved. Any help will be appreciated.
Thanks in advanced.
Manuel

No surprise your teacher doesnt get it. when I did the cert IV the 30 html tutorials we did revolved around how great table based layouts are. suffice to say I didnt listen to that rubbish, and unfortunately the curriculum is just a wee bit behind where it really should be.
what you are looking at is responsive design.
you wont get any real relevant information regarding this at w3schools, its more for basics.
it utilises media queries.
http://www.w3.org/TR/css3-mediaqueries/
yes technically you can use the dw fluid grid layout, but i'd advise that you learn the process behind how to style accordingly with media queries before using someones already setup concept of how to do it. (and I've never done a site with just 3 media queries, sorry dreamweaver, thats just wrong.) I personally utilise (and each to their own with this) a min 320+ style, a 320-480 (or therabouts), 480-767 (or therabouts) (3x) 768-1024 (landscape, portrait and for desktops), 1025-1300 (or therabouts), 1301-1440 (or therabouts) and a 1440+. I always start mobile first
essentially the theory is to design your "design" flexible and where it "breaks" add a breakpoint. I try to make it not necessarily based on the device in theory but with the majority of phones sitting around the 320/640 mark, tablets around the 768/1024 mark. then laptops, desktops, and larger screens all seeming to congregate loosely around these higher figures...once youve set your parameters (and the above would cover the majority of devices) test, test, test!!!!
remember good ol' IE will struggle with this. there are many work arounds, some better than other. I usually just offer a fixed width site for IE.

When logging onto a web site with a log on name firefox is changing logon name from Kostas to kostas as the site is case sensitive it is not acceptable. how do I correct this? Thanks

I registered with a web site and used the name Kostas as the log on name. Entered a question and recieved replies
When I later tried to log onto the web site to say thankyou ,and enter Kostas in the log on box a reminder appears created by Firefox of kostas, I ignore this, move to the password box and firefox changes the log on name to kostas with small k. The register is case sensitive so for quite a while I could not understand what was going wrong? I eventually managed to log on by using a rival system
My previous experience is that if you use a different log on name it is recorded and then you choose the correct one to use? But in this case I am given no choice
How can I correct this please
Probably no connection but
I registerd with another site and recieved an e-mail in which I had to click on web address to confirm registration and came up with an error message, tried a few times and same thing happened?? The webmaster of this site had no record of my registration details?
Finally I had a phone call from a company called NERD-I.com
offering to solve various computor problems at a fee. I did not take up their offer, but hope they do not have anything to do with my current problems??
Many thanks

Hi Corel
Thank you for your reply
However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
How do I do this please
I have no bother with this on Win Internet Explorer but I like Firefox
Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
But I would appreciate knowing the correct solution from an expert

This Site Needs A Lot Of Work

I have just spent over an hour trying to post a question to the support forum and have been unable to do so. I get an error telling me to correct the highlighted errors and try again. THERE ARE NO HIGHLIGHTED ERRORS. It is just a simple post with a subject line and body text. The error message doesn't tell me anything helpfull and I was unable to post my problem.
I've noticed a couple of other annoying things about this site too. For one thing, I log onto the HP web site and when I go to the forums I find that I have to log on again. What's with that?
Then I have to really look around to find out how to post a question. I get the feeling that you would rather people didn't post questions to the forum because you've done a good job of hiding the links to post a question. A user really has to search for it. And then you wind up getting an error and can't post anyway.
So guess I'm going to have to call HP supprt rather than trying to solve my problem through your web site.
This site has a TERRIBLE user interface.

Hello,
If you are having technical troubles I suggest using another browser like Chrome or Firefox otherwise you can find tips for navigating the community here.
MrMatthew - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.

I am attempting to upload an EPUB document to iTunes Connect, but each time that a login, "Apple ID does not have permission to use this site." What is going on?

I submitted an ISBN number and title to the iBooks Store using iTunes Connect.
A nameless iBooks editor replied back, reuesting that I submit a digiral copy of my ePub document to iTunes Connect.
The first time, I got past the login stage, but I was told that my title and ISBN had already been submitted and I was kicked, the second through sixteenth time that I attempted to login, the system reported "Apple ID does not have permission to access this site"
Can someone please tell me how to manuver around this roadblock?
Regards,
Robert Owen Cobb, CNE, MCSE
aka The Clemmons Kid

You have to apply to be approved for iTunes Connect first.
Start here.
https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/apply

Why this site used php files in all the pages?

Hola
I download my friend's site and ALL the pages are in a folder with the file name index.php ... WHY?
Example;
Name of folder; gallery
Inside this folder, a file with the name index.php
Name of folder; contact
Inside this folder, a file with the name index.php
It has an "includes" folder with files for ;
header.php, footer.php, content.php and functions.php
and so on.
Now, this site has ONLY 7 pages, it's not like it's a monster site, so
what is the purpose of using php in every single page?
I have to tell you that my friend has a program call CKeditor and CKfinder to
edited her website.
Not sure if this is the reason why this site has been coded all of it with php files.
I'm waiting impatiently for your responce

>Now, this site has ONLY 7 pages, it's not like it's a monster site, so
>what is the purpose of using php in every single page?
The reason for using php extension or not has absolutely nothing to do with the size of the site. If the site uses dynamic pages, then the page need a dynamic page extension. Even sites without dynamic pages often use .php in anticipation of using them so the file names won't need to be changed down the road.
Now, if your question is more about why they created separate directories for each page, it's probably so the url's can be accessed without including the file extension, Ex
example.com/contact
instead of
example.com/contact.php

FrameMaker 9: Licencing for this product has expired

A few weeks ago, I installed a licenced copy of Technical Communication Suite v2, but did not really get the chance to try it out properly at the time.
Upon launching it yesterday, instead of the application launching, I just got a dialog box:
"Licencing for this product has expired"
Does anybody know how I can rectify this?
Thanks,
Jon

Jon/Mike,
If you had any of the beta versions installed, then this will mess
with subsequent new installs if you didn't deactivate and remove the
serial number before it expired. To kick start it back to live with
the appropriate new serial number you can try these steps. Note: you
don't necessarily need to uninstall and re-install the suite.
1. Roll back your system clock to a point when the beta/prior version
was working.
2. Open up either FM/Robo/Captivate and select the "Deactivate..."
under the Help menu.
3. You will be prompted if you're sure and want to deactivate the
whole TCS, etc. One important option here is that you can remove the
serial number upon deactivation. You need to do this!
4. Once deactivated and the serial number is removed, reset your
system date back to normal.
5. Finally start up any of the three main apps and you'll be prompted
with the EULA that you have to agree to and then will be asked to
enter the proper serial number.
I hope this helps in your situation.
Been there, done that... ;-)

My mozilla firefox on my desktop brings that the site has been blocked on most of the sites i put in. Help me undo that

It brings that this site has been blocked due to recent activity that was considered spam

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

A site has saved some user names/passwords but will no longer offer the option; how can I fix this?

The local library web site I use allowed me to save my data and one child's data. When I went to add my other 2 children's data, it will not allow me to save the user names and passwords. I cannot find any information on why this happened or how to get it to save again. I would either like to find a setting to turn this back on for this site or if I could manually enter the data into a file some where. Other sites will still let me save the info. Is this a setting or something their web site has altered?

The Passwords Editor extension includes a feature which allows you to manually add passwords. 
https://addons.mozilla.org/en-US/firefox/addon/saved-password-editor/

When trying to send a comment to a web site I get a message, Firefox has blocked this site, how can I turn this off?

when trying to send a comment to discussion sites I get an error message that says "Firefox has blocked this site" actions offered "allow"
or "X". When I enter "allow" it ignores the command and the message disappears. A lot of wasted thought and typing. How do I turn this feature off.

See: Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
See: [[Options window - Advanced panel#General_tab]]
See also: http://kb.mozillazine.org/accessibility.blockautorefresh

This site has screwed up my username. How do I correct it?

Similar Messages

Maybe you are looking for