"this software requires an additional 50K bytes on the H: drive.."

see the message title....

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Similar Messages

I can't update becuase my mac says this, This software requires Mac OS X version 10.6.8 or later.

I can't update becuase my mac says this, This software requires Mac OS X version 10.6.8 or later. any ways to update my iTunes?

You need to call 1 800 My APPLE and ask for Snow Leopord disk.
The cost is $29 I believe.
all iOS 6 OS and hardware announced (iphone5, new nanos, etc) require at least 10.7 version of itunes.
iTunes 10.7 requires OS 10.6.8

This software requires Mac OS X version 10.6.8 or later.

I can not back up my new iphone 5 to y itunes because my apple computor won't let me upgrade my itunes. After I try to download the latest itunes, it tells me "This software requires Mac OS X version 10.6.8 or later" I don't know how to get it to download. Any suggestions would be welcome. My mac os x version is 10.5.8

SL = Snow Leopard. 10.5.8 = Leopard. 10.6.8 = Snow Leopard.
10.7 = Lion, successor to SL. And 10.8 = Mountain Lion which succeeded Lion.
Not in person, as far as I know. But free shipping, usually within 4 business days.

What does it mean This software requires Mac OS X version 10.6.8 or

after downloading the latest itunes im unable to update my new iphone 5 because it says
"this software requires Mac OS X version 10.6.8 or later"
My computer is all up to date
thanks

You call Apple Sales & order a retail copy of Snow Leopard(10.6.8), US $29. Then update to iTunes 10.7. Either that, or you don't use your phone with your computer.

TS3212 error message help: This software requires Mac OS X version 10.6.8 or later.

Hi I'm trying to download the most up to date version of itunes and keep getting this message: This software requires Mac OS X version 10.6.8 or later. I have a mac book pro? can I not download this??
Cheers
Lisa

Hi Niel thanks for that I tried that I'm runnung Mac OS X 10.6.5 it's not having it from the software update in preferences either I think I'm going to need a DVD!!
Thanks for your help
Lisa

Configuration Error This Software requires certain hardware or software. .

I installed FCP on my ibook so I could do some work in transit, and got the following error when I tried to open FCP. Is There a way around this?
Configuration Error This Software requires certain hardware or software which is missing - APG graphics card

#29: Need AGP Graphics card
Shane's Stock Answer #29 – Error: “Need AGP Graphics card”
http://docs.info.apple.com/article.html?artnum=302667
The Final Cut software is looking for a graphics card type that is required for that version of the software. FCP 4 and FCP 4.5 were released when AGP cards were the requirement. Attempting to open this on a Mac with a PCIe graphics card, such as an Intel Mac, will cause this error. FCP 4.5 is not supported on the Intel Macs. If you happen to have a PowerPC Quad processor Mac and get this error, you can try this hack:
http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
You can also press the "esc" key as you launch FCP. This enables FCP to open and run, but know that it might not work optimally.
If that doesn’t work, or if you have an Intel Mac, you are going to have to upgrade to a supported version of FCP…and FCP 6, part of Final Cut Studio 2, is the latest version.
Shane

Does this software support Bluetooth additional keypad (numbers) to add on original apple keyboard

Does this software support Bluetooth additional keypad (numbers)

Yes. You can pair more than one Bluetooth device to a single Macintosh.

I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data in addition to backing up the hard drive?

I have a Time Capsule with 2tb of storage, and an I-Mac with 500Gb. (which is at capacity) Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?

Can I use the Time Capsule to store data from my hard drive that I want to access later in addition to backing up the hard drive?
Yes, but if you move the "original" data on your iMac to the Time Capsule....then the "original" data is now on the Time Capsule disk.
When...not if...the Time Capsule disk has a problem, you have no backups for this data.
Perhaps a much safer plan might be to add an external hard drive attached directly to your iMac. Then, move the data to that drive from the iMac.
Now, Time Machine will back up both your iMac and the external hard drive so you have "originals" on one drive and backups on another. Would that plan work for you?

Every time i launch garageband i get this message "Error code 28773 was returned by the Audio driver."

HI. I just got a new macbook pro 15".
every time i launch garageband i get this message
"Error code 28773 was returned by the Audio driver."
when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
anyone know how to fix this?
I have installed BOOM, but i think that's the only extra sound software i have.]
PLEASE HELP!
thanks,
mojoman22

Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
Parallels
and definitely remove at least the following:
Boom
† MacKeeper
† VirusBarrier
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
Remove the "MacKeeper" crapware as follows.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

Aperture 3.1.1 on iMac try to upload to 3.1.2 and more,mac givs me warning this software requires mac ox 10.5 or newer,i have lion on it,i have try the pro kit 1.5 and 3.1.2,3.1.3 can not download can anybody help me out?

help?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does my Macbook say, "This software requires Mac OS X 10.6 to be installed"

I am so confused. Its not letting me use itunes store, or anything. I cant hook up my phone and put songs on my computer or anything. And everytime I try to update it says system is up to date. ???????? What is going on with my computer? I neeed help!

Your 10.5.8 Leoaprd may be up to date, but your latest gadgets require a new operating system being 10.6 Snow Leopard. This is available on DVD from the online store. Costs approx $20.
Here is the US example.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Once installed you then can do further free updates.
This depends if your computer can handle the upgrade. These are the requirments.
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory but 2GB is recommended.
5GB of available disk space
DVD drive for installation

I need help..so urgent,pls help on this..i accidentally inserted my SD in the cd drive,how can i get it?does it will affect my computer's system?

in need of help..i accidentally inserted my SD in the cd drive,does it will affect my computer system and function?

Don't feel bad, you are not alone. Here is a 6 page thread (one of many others) that should be of help: https://discussions.apple.com/thread/2283444?start=0&tstart=0
Some got them out and others had to take them in for service.

Problems with Photoshop CS2 I originally purchased this software several years ago. At time I was running Microsoft Windows XP. This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few

Problems with Photoshop CS2
I originally purchased this software several years ago. At time I was running Microsoft Windows XP.
This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few exceptions as follows;
when the software comes up initially I get a message that says “could not complete your request because of program error”. Hitting OK allows me to continue using the software .
When I try to activate a function using CTLR or ALT keys I get this message “required application failed to load and the product cannot continue. Please reinstall the application”. This causes the application to abort.
Reloading my CS2 continues to generate the same messages when I depress the CTLR or ALT keys.

Your original copy is obsolete and Adobe is offering a free replacement you are entitled to. Download and use that and that should clear it up for you.
https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Download this copy of CS2 and use the serial number provided next to the download link.

SAProuter software requirements

Hi everybody,
I am fairly new to the SAP universe.
I want to install SAProuters on Windows servers. Are there any software requirements prior to my installation of the SAP packages?
My objective was to install in under Windows Server 2008 32 bits Entreprise Edition to be similar to the rest of my servers. Are there any prerequisites for this OS? Will it be OK? I did not find any software requirement for this component on help.sap.com. Please forgive me if this is a dumb question
Many thanks,
Thomas

Hi
no question is dumb dude
well a windows server 2008 is enough for SAP Router installation,you dont require anything else
Let me know of any questions
Rohit

Ive got photoshop CS6 in my computer but when I tried to open it, it opened as Photoshop CS6 Extended and is asking me if I want to license this software so I can no longer access Photoshop. Can anyone help at all?

I've been using Photoshop CS6 and suddenly when I try to open images with this it takes me onto a page saying Photoshop CS6 Extedned and is asking me to license this software. Ive already got Photoshop so why is this happening? I now cant access it?

You should see a prompt to "License this Software". You might see it on the Trial Screen.
Click on that, sign in if asked, then click on the "I have a serial number" option or you maybe able to do that directly.
Once your serial number is entered, your software is licensed and activated.

"this software requires an additional 50K bytes on the H: drive.."

Similar Messages

Maybe you are looking for