This sound is normal?

Lapton I buy a toshiba L355-S7835,but each time the cumputer makes a noise,quietly,but I'm concerned,I don't think is the fan.The team works well so far and fast,but don't know if that sound is normal in this equipment.

is the sound that silent radio frequency sound? my toshiba is making that noise and i just bought it

Similar Messages

Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery. But I got more time out of running with my iPhone. Does this sound normal? I thought I sh

Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery. But I got more time out of running with my iPhone. Does this sound normal? I thought I should get close to 30 hrs of just play time alone.
ALso, my wife got me the Belkin armband to run with the nano but I sweat through the band resulting in the back of the iPod to get wet. Surely this is not good. Anyone have a recommendation for an armband that keeps moisture away from the pod?

iPod Nano are small and they don't use Wi-Fi access so you get less power time on a Nano. As for iPhone, since you got apps, Wi-Fi + 3G access, and everything else, they give you more time so you can keep using. Nanos are ment to listen to music, listen to radio, view your photos, watch videos (without Wi-Fi) and since you got BlueTooth on the nano, it counts as wireless access so it drains your battery faster.

Pixma MG7120 owners, is this sound normal?

I have a brand new Pixma MG7120 and I'm concerned it may be faulty, I did call Canon support and they claimed to test and unconvincingly said their printer made some noise too - although I will say it's hard to describe a noise over the phone.
Issue:
After powering on (or off) when it spins the rollers backwards slow and fast I hear a clicking/tapping sound, but only when the front door is closed, so it would seem to be something to do with the door latching mechanism.
Is this normal, it prints fine, I'm just concerned of part failure out of warranty if this isn't normal.
Thanks in advance.

I'm surpised I didn't get more replies, but I feel happier at least someone else hears exacty the same thing... I wasn't sure the person at Canon support 100% understood what I was describing so I posted here to be sure. The noise does appear to come from the printer door hinge area, so must be something to do with the release mecanism - maybe it rachects when the rollers spin backwards as when forwards it would normally open the door for printing... Still a strange design choice.
My printer does print 100% fine.
Thanks for your reply.

I have a Panasonic FZ38 HD camera. I can load and view my hd movies onto iMovie with no problems via my camera or a card reader. When I try to copy my hd videos from my old Windows pc to my new iMac, the picture speed has doubled but the sound is normal.

I have a Panasonic DMC-FZ38 HD camera and have lots of hd movie clips stored on my old Windows Pc using Photofun software supplied by Panasonic, which I want to transfer to my new Imac computer. I am able to copy my most recent movies that are still on the memory card from my camera onto Imovie and view them with no problems at all. When it comes to copying my old existing hd movies stored on my Windows Pc (and which are no longer stored on a memory card), I discover that when I view them on the Imovie, the speed has doubled but the sound is normal. In order to transfer my old movies I have copied them back onto a memory card (SDHC - the same card as previously used) and then put the card back into my camera and then copied them onto my Imac via the camera USB. I have also used a card reader but get the same result. If I view the same movie through my camera, or look at it on my old pc, it plays at normal speed. Does anyone have any ideas as to why this is happening please?

have you read and watch the Tutorials..? :
http://www.apple.com/ilife/tutorials/#imovie
iM is a bit.. iffy, when it comes to the definition, what a 'camera' is. historically, only tape based machines were a movie-camera. nowadays still-cams allow movin' images too..
but, as mentioned above: the intended workflow is: material from photo cameras (even when they move) => import via iPhoto; material from video cameras (even when they don't move.. ) => iMovie
when the import is done, you'll notice in all iLife apps the 'media browser' - in iM09, on the very right, the icon with a camera on.. click it, presto, all (incl. your 'videos') your iPhoto Library at hand for usage in iMovie.
watch this:
http://www.apple.com/findouthow/movies/imovie08.html#tutorial=otherimport
(about from midths of tutorial...)

This sound is killing me!

this is my first mbp...c2d, just bought last friday...
i've used two other mbps before (a few months ago) and they never had this sound...it's like a jet plane
is this the 'whine'? b/c sounds more like the fans are on overdrive...and it only seems to happen when i'm doing 'intensive' stuff...but i don't really consider it intensive..i'm just importing from a 200GB external into itunes and iphoto....
please tell me this is normal...
i bought the c2d thinking that all the problems would be solved.........i'm not exactly happy about this fan .....it's like the mbp is geting ready to take off on a runway or something....

You can download a program to tell you your temp and fan speed. At then you will have an idea what is going on.
This guy created a program (no opinion on safety) that tells you temp and fan speed. It even allows you to change the fan speed.
http://www.conscius.de/~eidac/index.html

Does this sound like a logic board problem? Blue screen

I have a G4 1.33GHz iBook 14". Recently it has started having problems with freezing and booting. It will boot normally, but a few seconds or minutes into use, if freezes, and only a force shutdown with the power button will work. Then, when it restarts, it may run fine, or may freeze up. Sometimes when it boots, the apple logo shows up, then the spinning wheel, then a light blue screen. And then, nothing.
I have tried all the usual stuff, including starting with the 10.4 DVD and running disk utility. Also Onyx and version 3.03 of Disk Warrior. It wouldn't boot from the Disk Warrior CD usually, and the one time it did, if froze up.
SO, I ended up booting it in Firewire Target Disk mode, and reformatting (zero'd out) using my MacBook. Then, reinstalled the 10.4 and upgraded to 10.4.7 using Software Update. It worked fine for about two hours, and then started freezing and blue screening again.
Does this sound like a logic board thing? It just occurred to me that I haven't tried all this stuff with my additional 1 Gb stick of RAM out. It hasn't caused any problems before, but I suppose it might affect this, no?
Sorry for the long post, but I want to try to diagnose and fix BEFORE it goes off to Apple to be returned with a "we can't demonstrate the problem" message and a bill.
Thanks
Roger

I took out the 1 Gb stick and it did the same thing. About half the time it boots, works for a little while then freezes up. The rest of the time it won't boot past the spinning wheel then the blue screen. Same deal with the OSX DVD and the DiskWarrior CD.
Frustrating. I may have to send it in.
RDS

On line banking for another person, my Mom, who I have power of attorney for heard ppffzzzttt while inputting Mom's sensitive id info in while trying to log in again? I've had the iPad 3/ 4 & 4.5 and never heard this sound before.

I tried to access my Mother's bank for online banking. She has had a slow decline with dementia, I'm Power Of Attorney for her. When not being able to sign in, I heard through the iPad 4 Wi-fi 64 gig, a measured buzz sound, like ppffzzzttt. I've had 3 / 4 & 4.5 and never heard this sound before.
I have had Power of Attorney for my Mom for quite some time. She has been suffering with dementia in a slow then sped up type after her last heart attack. I was the worst candidate for the job but no one else would take it.
I set up banking on line so I could pay her bills. I am disabled and have trouble paying my own. The iPad again filled those shoes perfectly.
I logged on yesterday, and the page said, user name not found. I figured it might have been server maintenance or poor typing but even with all personal details the server would not send my user name.
I became concerned because today I received the Vudu letter that said their headquarters were broken into on March 25th, 2013, and a number of hard drives were stolen with all info they keep on me. They set up an all clear id free of charge for a year, if I wanted to take advantage of it which I did.
The part that bothers me is when I was inputting my Mother's sensitive id information my iPad 4 / Wi-Fi / 64 gig emitted a measured buzz sound 3 times. I have had the 3 / 4 / 4.5 / faster processor but did not go for the 128 gig 4.75, and in all that time I have never heard that sound.
The question, was the bank computer or the FBI probing my iPad 4 and did it place something on it in the memory or damage it in anyway.
I was on the phone for the next three hours with the good, bad and ugly at Citizens. After talking to an acquaintance bank manager who said she saw no problem and did not know why I could not log in. I spent the next three hours on the phone and ended up talking to a nasty tech who said, it was a rule that I could not do my Mother's banking on line anymore. A "rule" prevented me from acting in that manner. It all, from every party sounded so "hinky," Don Johnson, Miami Vice and wondered if there was a rule at all.
I asked him why and what triggered the on line banking system to suddenly boot me? The fact I had set it up about one year ago to date and it has performed flawlessly since that time and a whole year later it flagged the account. He said it could have been anything, pressing the wrong key, etc. I knew he was getting edgy so I ended up getting off the line with him because nothing would be accomplished.
I would appreciate any and all speculations, ideas, or suggestions as I look over banking law, rules, in the next few days. By the way, the money we are talking about is miniscule. A small SS check and an even smaller pension check.
Thank you,
halfcack

That situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.

How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs.

How can I just disable "navigation toolbar" completely for the App Tabs? I don't want to disable this for other normal tabs. This is important as otherwise while I am in the app tab, i mistakenly start browsing from that tab and meaning of the app tab is completely lost...

How can I view my full billing history for the app and music stores without iTunes installed?
No.
If my account has been compromised
If you even think this may have happened, immediately change your password.
See this -> Apple ID: Changing your password

I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight.

I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now? so far every app I have tried says I need an updated IOS. This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product.

Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
* tax not included.

WSUS throwing 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal."

Hello,
Within the past two months our WSUS Server started throwing error 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal." We currently have 252 computers with errors in WSUS,
and 33 updates with errors. We have never had issues up until two months ago. If you keep rebooting the machine, and keep running updates, they eventually all install. I believe I will see the machines with errors go away as the weekly scheduled
WSUS install runs over and over, and the machines reboot.
- We run IE8 in our environment and sometimes IE9.
- We have 300 clients, all running Windows 7 SP1 x64.
- Our WSUS server is running on Server 2008 R2. The WSUS build number is 3.2.7600.262.
- We created an alternate WSUS 4.0 server on Server 2012, and redownloaded all updates. We put one client on it and it is showing errors on 3 updates, KB890830, KB931125, and KB2917500.
- Clients are throwing errors 800F0902, 80242016, and 80070005.
- I've noticed something with the C:\Windows\SoftwareDistribution\Download folder on the clients. When an update runs and fails, there is a "Install" folder created inside this folder. If you try to open it after the failure you get
"Access Denied" If you reboot the machine, the install folder goes away. (I assume this is a temp folder created to run updates). I've checked the permissions on this folder on various machines and all seems normal. I think
this is the root of the problem, and why we need to keep rebooting to get all of the updates to run.
- I tried deleting the Software Distribution folder on a client after stopping the update service, then restarting the update service. The folder redownloads but the client still throws errors.
- I've gone through our Group Policies looking for anything that can cause this and found nothing. We've created a test OU blocking inheritance, and only applying a WSUS policy in it to make it get the updates internally. I then rebuilt multiple
machines using Dell KACE, and still had failures.
- We run SEP 11 and 12 on our clients. I've tried removing the AV, making sure the firewall was off, etc. It still throws errors.
- I've spoken with our network team, and installed wireshark on a few clients looking for network errors and found nothing.
- I've tried various Dell KACE scripted installs on test machines (erasing and rebuilding the machines from scratch), after which I run Windows Updates from WSUS. They have thrown errors.
- I've rebuilt a machine using Dell KACE, undomained it, then ran updates externally from WSUS going to Microsoft's site, and I'm still getting errors.
- I've tried removing all software from the Dell KACE build to where it is just installing the OS and I'm still getting errors.
- I tried taking a plain Windows 7 x64 DVD and installing that on a test machine, then without domaining it and without installing any other software, running updates from Microsofts update site. This seems to work, althrough it does throw some errors
but I believe those are related to having to reboot your machine in order to complete the updates (I can't remember that error code at the moment).
Has anyone else been experiencing this? Any suggestions as to how I can fix this?

Hi,
Error 800f0902
Please try the method in this thread:
Error
Code: 800f0902
Error 80242016
If you receive Windows Update error 80242016 while checking for updates, it might be caused by a connection interruption between your computer and the Windows Update servers.
80070005
Usually means access denied
Since it worked perfectly for a while, did you make any change on the server? Any applications new installed on clients?

When i click on iphone ine. how do i get out of this and sync normally?

When i click on iphone in itunes it just comes up with option to restore from backup. how do i get out of this and sync normally?

Found a setting in Google that was telling it to open all result in a new Windows which I was guessing that Firefox was overriding and open it in a new tab like settings suggested unchecked the box in Google and now the behavior is back to normal.

Why is my iPad all fuzzy and blue? This isn't normal? How do I get it back to normal? Someone please help me.....

Why is my iPad all fuzzy and blue? This isn't normal? How do I get it back to normal? Someone please help me.....

Try resetting it. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.

I have bopped around the forums here for a while now, and while other people seem to have had the same problem as I am having in the past, I come to find that all of the solutions that have worked for others, do not in fact, work for me.
I am running Flash Professional CS6 On an Acer Aspire. 4 Gigs of RAM, 500 Gigs of HD.
The exact problem that I am having is as follows:
I record a sound bit in Audacity, Export the sound as and MP3 File on my main computer Hard Drive.
go to File>Import>Import to Library, I locate the file that I had created, then select it to be imported to my Library.
I then create a new layer in my timeline, Label it as sound, place a new key frame into the timeline layer at the place in the animation that i hope the sound would start, set the audio sync to stream instead of event, then press CTRL+ENTER, which initiates the Test Movie function.
At this time, the "Output" box Pops up and it states,
"Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored."
No sound is played and i cannot, for the life of me, figure out why. I have tried all the troubleshoots that i can find online. I checked the publishing settings and nothing is being Overridden, I've attempted to untick the "export device sounds" option, but it is grayed out and cannot be toggled. I have attempted switching the MP3 format sound clip to a WAV format sound clip. I have attempted to re-recording the sound clip and re-importing the clip to the library. I have checked my computers speakers and everything is in working order and i have even checked to see if other projects sound works.
I pulled up a previous project that i had finished a while back that had loads of sound imported the exact same way and it all works exactly as i expect it too. The sound plays, there is not "Output" box claiming an issue. It seems that the issue, whatever it might be, is stuck to this project itself.
I have even started a new project, imported and placed both the MP3 and the WAV files into the sound layer created, CTRL+ENTER, and it works just fine without problem.
If there is anything that i might have accidentally messed up in this projected that you know about, like settings that may have been changed that would cause such an annoying and seemingly unfixable issue, please let me know. I really do not want to loose this project over such an utterly stupid error.

I've moved your question to the Flash Pro CC forum.

Does This Sound Good?

I'm a student and am looking at purchasing a MacBook Pro to replace and old Dell Desktop. On my laptop I plan on having about 40-50Gb of iTunes movies, Music, TV Shows, etc. Also, being a student, I am obviously going to use Microsoft Office all of the time and probably iWork '06. I am also purchasing Final Cut Express HD because I do like to play around and edit digital video. And of course, I do tons of web browsing.
This is my first mas and this is how I would like to configure it.
15.4" Display
2.16GHz C2D
1GB RAM (I will buy another 1GB stick from newegg.com)
160Gb Hard Drive
iWork '06 Pre-installed
And later in the year when I have more money, get the AppleCare PLan
Let me know if this sounds like an Okay configuration for my needs.

Hi,
that sounds like a config that fits your needs.
Two suggestions:
1. Don't buy iWork preinstalled, but play with the 30-day demo, that is already on the HD.
If you like it, you can buy it later for the same price, if not, you save money.
2. Instead of MS Office, which with version 2004 isn't Universal Binary (that should come with version 2008 later this year), have a look at NeoOffice.
It is free and capable of reading the 2007-Windows-file formats.
Have Fun
Stefan

Does this sound like a dead Time Capsule?

Came home this aft to no WIFI. Checked and the light was off on my Time Capsule (first generation) but otherwise intenret connectios seemed OK.
Powered the TC off/on; green light came on momentarily, changed to orange for about 30 seconds, then went off again. Repeated the cycle several times with no difference.
I have noticed recently that the hard-drive in my TC was getting noisy but everything appeared to be working until a few hours ago.
I recall there were issues with the early Time Capsules and sudden death. Does this sound like that situation?
Welcome advice on whether current generation Time Capsules are more reliable or would a better course be to replace it with a generic router and seprate backup disk?
Thanks ..donald

Apple treated me well on this. My TC was 15 months out of warranty when I took it to the Genius Bar. About the only question asked was "do you have Apple Care on another product?", following which a replacement TC was produced, some paperwork signed and I was on my way.
Only a couple of reservations:
The replacement TC, according to the Genius, is new "service stock" (not a refurnished unit) but the same model as my original TC; i.e. First Generation. This leaves me guessing it will have about a 2-yaer lifespan as well, so I I should plan on upgrading well in advance. I'll be listening carefully for strange noises and watching how hot it gets.
The second reservation is about security of the information on the TC; al the Time Machine backups plus a little bot of other stuff. The old TC was boxed for return to Apple and I have to trust Apple that it will be securly destroyed. Trust is a big thing.

This sound is normal?

Similar Messages

Maybe you are looking for