"This value would cause one or more object to leave the pasteboard"

I'm getting a little tired of this one. I've inserted a photo into my document, and need to just tweak it over a bit to the right. Less than .5 inch, but I'm not able to move it at all. There's plenty of room on the "page" and I'm not entering any "value," just trying to move the danged thing. Why does this keep happening?

Is it possibly grouped with something out on the pasteboard?
Are you using the mouse or arrow keys to move? OS? Version of ID?

Similar Messages

Why do I get the "this value would cause one or more objects to leave the pasteboard" message when p

I'm placing images from Bridge by selecting the image or images and going to File>Place>In Indesign. This loads the cursor in ID and I attempt to click and drag a frame to size the image on the page. That's when I get the message.
Placing images into existing frames is OK, and single click to place works also. Only when I click and drag to create a new frame.
This happens every time regardless of image size, resolution or root folder location.
Any ideas? Why is ID stuck with click & drag?
iMac 2.66GHz 8GB RAM
OSX 10.8.2

Try trashing your prefs. See Replace Your Preferences

Help! "Requested Operation would cause one or more objects to be too small"

I tried to copy several pieces of text I selected and grouped together to another page. They seemed to disapper, so I went back a step. They immediately made my pasteboard gynormous.... that's one problem, but then, when I tried to type on the page I was going to I get this error message, "Requested operation would cause one or more objects to be too small...." and it won't let me type anything on that page. I can type on other pages, but not that one. I shut my computer down, started again, but still it's there. I saved as another document, but still.... can't type anything on the page. I've got a newspaper to get out. eek. Any help would be greatly appreciated.

Nobody can help you without any system info, details about your documents, fonts used and whatnot. From your description it simply sounds like a DPI settings issue...
Mylenium

BCM 2007 error: "To help prevent malicious code from running, one or more objects"

Recently we changed our e-mail accounts around to a new domain name. After this switch, BCM no longer allows adding, editing or any other manipulation of contact records. I get an error message saying "To help prevent malicious code from running, one
or more objects in this form were not loaded."
I have tried clearing the forms cache, uninstalling and reinstalling BCM and even adding the old e-mail address back into the Outlook profile and nothing works.
Is there something I have missed somewhere or am I looking at a complete reinstall of Outlook and BCM?
Jon

Hi Jon
Thank you for the update. It could be another Active X Component - BCM 2007 calls several of them
On thing you could do is run a Process Monitor Log to see if perhaps another component is Blocked. To do that try the following:
1. Close Outlook and as many other programs as possible
2. Download and Extract Process Monitor from here -
http://technet.microsoft.com/en-us/sysinternals/bb896645
3. Start Process Monitor
4. Start Outlook
5. Reproduce the error in BCM
6. Stop Process Monitor by going to the File menu and unchecking "Capture Events"
At this point you can try filtering by clicking the Filter Icon (the Funnel) on the menu bar. Click on the Left Drop down at the top of the Dialog and Select "Path"
For the second dropdown select "Contacts" and then filter on "ActiveX Compatibility" (without the quotes)
in my lab, every GUID under HKLM\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility came up with a result of "Name Not Found"
On your system, are there any are present (the Result Column will show "Success")?
If so, then I would check the Compatibility Flag for that one (Hint - if you right-click on an Entry you can select "Jump To" to open Regedit to that location)
- or -
If you would like for me to take a look at it, in Process Monitor Go to the File > Save Menu and save it as a .PML file. Then send it to me at cts-larrymei at live.com
Note - Please ZIP the file prior to sending it
Thanks!
Larry - MSFT
Larry Meinstein

Cannot remove this sync group because one or more databases are currently provisioning,

I have a problem with a SYNC group within my development Azure Database.
It been stuck in "processing" state last December and has never recovered.
I have since setup a new Sync Group to sync the data between my cloud database and my local database. The new Sync Group is working properly.
It bothers me that the old one is still out there, and I would just like to remove it, but I get the following error message:
Cannot remove this sync group because one or more databases are currently provisioning,
re-provisioning, de-provisioning, canceling sync or synchronizing. TracingId=fe9d220c-56c7-791f-ac0f-ea26989e02a1
Does anyone have any suggestions on how to delete the failed SyncGroup from Azure?

Hi jstevenson72,
How about using the DeprovisioningUtil tool? With DeprovisioningUtil tool , you can manually clean up all objects by running the deprovisioning utility from the same folder where the Data Sync Agent gets installed.
Besides any of the following can result in a failure to delete a sync group.
• The client agent is offline. Be sure that the client agent is online then try again. Reference :
SQL Data Sync Troubleshooting Guide.
• The client agent is uninstalled or missing.
If the client agent is uninstalled or otherwise missing:
1. Remove agent XML file from the SQL Data Sync (Preview) installation folder if the file exists.
2. Install the agent on same/another on-premise computer, submit the agent key from the portal generated for the agent that’s showing offline.
• The SQL Data Sync (Preview) service is stopped.
1. In the Start menu, search on Services.
2. Click Services in the Programs section of the search results.
3. Find the SQL Data Sync (Preview) Preview service.
4. If the service status is Stopped right-click the service name and select Start from the dropdown menu.
• A database is offline. Check your SQL Database and SQL Server databases to be sure they are all online.
• The sync group is provisioning or synchronizing. Wait until the provisioning or synchronizing process finishes then retry deleting the sync group.
And for Azure issues, I would like to recommend you post the question in the Azure SQL Database forum at
https://social.msdn.microsoft.com/forums/azure/en-US/home?forum=ssdsgetstarted. It is appropriate and more experts will assist you.
There is also a similar thread for your reference.
https://social.msdn.microsoft.com/Forums/en-US/d0c50049-4d20-447e-85f9-904f7d146a40/cannot-remove-a-data-sync-group-even-dropping-the-involved-databases-and-servers?forum=ssdsgetstarted
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Error-No value given for one or more required parameters when using oleDBDa

Hello,
I have this sql statement and it works well, the Crystal Report gives good result when I put concrete values like:
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>='1001' And (NOVI.GBR)<='1080') AND ( ((NOVI.AB)='AK') OR ((NOVI.AB)='AK') ) AND ((NALOG1.DATA)<=#10/31/2011# and (NALOG1.DATA)>=#10/31/2011#) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
but when I use code like this :
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>=? And (NOVI.GBR)<=?) AND ( ((NOVI.AB)=?) OR ((NOVI.AB)=?) ) AND ((NALOG1.DATA)<=? and (NALOG1.DATA)>=?) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
Edited by: Don Williams on Nov 23, 2011 7:22 AM

and the code after that:
command.CommandText = comstring;
            if (radioButton4.Checked == true)
                if (textBox1.Text == "")
                    button1.Enabled = false;
                    MessageBox.Show("Внесете гаражен број", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    textBox1.Focus();
                    command.Parameters.AddWithValue("@gbr1", textBox1.Text);
                    command.Parameters.AddWithValue("@gbr2", textBox1.Text);
            else if (radioButton5.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1080");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton6.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1081");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton7.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else
                MessageBox.Show("Немате избрано гаражен број или тип на автобус.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                button1.Enabled = false;
            if (checkBox1.Checked == true && checkBox2.Checked==true)
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else if ((checkBox1.Checked == true) && (checkBox2.Checked == false))
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "AK");
                button1.Enabled = true;
            else if (checkBox2.Checked == true )
                command.Parameters.AddWithValue("@ab1", "GP");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else
                MessageBox.Show("Немате избрано автобаза.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = false;
            command.Parameters.AddWithValue("@data1", dateTimePicker1.Value.Date);
            command.Parameters.AddWithValue("@data2", dateTimePicker2.Value.Date);
             DataSet2 dataSet2=new DataSet2();
             OleDbDataAdapter oleDBDataAdapter1 = new OleDbDataAdapter();
            oleDBDataAdapter1.SelectCommand=command;
                dataSet2.Clear();
                oleDBDataAdapter1.Fill(dataSet2,"Tabela");
                if (dataSet2.Tabela.Count == 0)
                    MessageBox.Show("Nema podatoci za toj period");
                ReportDocument cryRpt = new ReportDocument();
                cryRpt.Load(@"C:\Potrosuvacka-Pregledi\Potrosuvacka-Pregledi\CrystalReport6.rpt");
            cryRpt.PrintOptions.PaperOrientation = CrystalDecisions.Shared.PaperOrientation.Landscape;
                cryRpt.SetDataSource(dataSet2);
                crystalReportViewer1.DisplayToolbar=true;
            crystalReportViewer1.ReportSource = cryRpt;
            crystalReportViewer1.Refresh();
                conn.Close();
I get an error:
"No value given for one or more required parameters."
Could anybody help me please?
Thank you in advance.
Edited by: nelpet06 on Nov 23, 2011 9:30 AM

HELP!!! Message - (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) How do I get this to stop?

I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor. Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button. How do I get this to stop? Please be specific, I am challenged when it comes down to computers.
Thank You

This was extremely annoying for me, also. I started uninstalling unneeded Sony applications to try to narrow down the problem. It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom. Uninstalling the bluetooth package (via the control panel) takes care of the problem. Itunes also boots up way quicker. But uninstalling it will remove features related to bluetooth and nfc. For me, that isn't an issue, since I don't use them. Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem. They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
Side note: the Broadcom package is huge... nearly 1GB in size. Which is crazy. I can't imagine what it does considering the size of it. Entire operating systems can take up less storage. Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.

One or more ports used by the Compute Emulator are currently used by other processes

Environment:
VS 2012 Professional
Azure SDK October 2012
Windows 8
I lost the last few days of my life struggling with a weird issue in the emulator. I just ran out of options and I would really appreciate if someone could help me figure out what's wrong.
I am trying to debug a service package from Visual Studio 2012. It's really just about any package -- even the ones generated from a Windows Azure Cloud Service VS template. Any. The VS debugger starts, and in parallel there's "Starting the Windows Azure Debugging
Environment" dialog which shows "Deploying service package to the Windows Azure compute emulator..." message.
The progress bar shown in the dialog gets stuck for a long time (possibly even for an hour or longer!) at some 60% and then the following error message is shown:
"One or more ports used by the Compute Emulator are currently used by other processes. To resolve this, please see MSDN documentation at http://msdn.microsoft.com/en-us/library/hh472164.aspx"
There doesn't seem to be anything else listening on the ports mentioned on the above MSDN page. I did nevertheless try to re-map devfabric and agent ports by specifying different values in the .config files mentioned on the page, but that did not help.
What I also tried and did not help:
- reinstalled SDK, IIS Express, Local DB
- reinstalled VS 2012 (yes, I got that desperate)
- tried using IIS instead
- used SysInternals TcpView to check if there are any conflicts
- rebooted the machine: the deployment works initially (*once*), and the subsequent deployments fail (!)
- tried to kill all Azure-related processes in memory and restart debugging
- tried looking into log files under the user directory (dftmp\...); no errors in *any* log
- tried looking into Event Viewer logs (Azure-related and in general); no errors either
Since the conflict seems to be related to my current network settings, below is my IP
configuration. I am behind a router and I have DHCP activated, but again that should not matter since none of that has changed in the last few years (and the emulator did work until few days ago).
C:\WINDOWS\system32>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : MYCOMPUTER
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
   Physical Address. . . . . . . . . : 32-AB-30-66-BC-56
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2a01:e35:8a3a:9970:edd9:b989:b67a:5a8a(Preferred)
   Temporary IPv6 Address. . . . . . : 2a01:e35:8a3a:9970:dc7a:4fe6:62a5:e54a(Preferred)
   Link-local IPv6 Address . . . . . : fe80::edd9:b989:b67a:5a8a%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.0.1(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Sunday, December 16, 2012 21:26:30 PM
   Lease Expires . . . . . . . . . . : Tuesday, December 18, 2012 09:26:14 AM
   Default Gateway . . . . . . . . . : fe80::224:d4ff:fea2:9722%12
                                       192.168.0.254
   DHCP Server . . . . . . . . . . . : 192.168.0.254
   DHCPv6 IAID . . . . . . . . . . . : 253808432
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-1B-EE-4D-20-CF-30-66-BC-46
   DNS Servers . . . . . . . . . . . : 192.168.0.254
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7A96B710-3107-48B9-A7B2-2F261DDD91AD}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:1caf:12ff:a75c:5668(Preferred)
   Link-local IPv6 Address . . . . . : fe80::1caf:12ff:a75c:5668%14(Preferred)
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Disabled
Below are the Azure SDK emulator configuration files, unmodified (as created by the SDK installation).
DevFC.exe.config
<configuration>
    <configSections>
        <section name="DevFCSettings"        type="System.Configuration.NameValueSectionHandler" />
    </configSections>
    
    <DevFCSettings>
        <add key="StartMACAddress" value="00155D201928" />
        <add key="EndMACAddress" value="155D20193C" />
        <add key="StartIPAddress" value="192.168.0.20" />
        <add key="EndIPAddress" value="192.168.0.40" />
        <add key="DipPoolStartIPAddress" value="127.255.0.0" />
        <add key="DipPoolEndIPAddress" value="127.255.255.255" />
        <add key="VipPoolStartIPAddress" value="127.0.0.1" />
        <add key="VipPoolEndIPAddress" value="127.0.0.255" />
        <add key="DefaultGateway" value="192.168.0.1" />
        <add key="SubnetMask" value="255.255.255.0" />
        <add key="InternalSwitchName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricSwitch" />
        <add key="InternalSwitchPortName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricHostSwitchPort" />
        <add key="InternalEthernetNICName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricEthernetNIC" />
        <add key="InternalEthernetPortMACAddress" value="00155D201927" />
        <add key="InternalEthernetPortIPAddress" value="192.168.0.2" />
        <add key="InternalEthernetPortSubnetMask" value="255.255.255.0" />
        <add key="StorageRoot" value="DFTemp" />
        <add key="LogsDirName" value="DevFCLogs" />
        <add key="DynamicPortAllocStart" value="20000" />
        <add key="ManagementServicePort" value="15095" />
        <add key="RepositoryServicePort" value="15096" />
        <add key="AgentCallbackPort" value="15097" />
        <add key="AgentPort" value="15098" />
        <add key="PxeResponderPort" value="15100" />
    </DevFCSettings>
    <startup>
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
    </startup>
</configuration>
DFAgent.exe.config
<configuration>
<startup>
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
<appSettings>
    <add key="AgentMAC" value="00155D201927"/>
    <add key="AgentIP" value="192.168.0.2"/>
    <add key="EnableActiveNotification" value="false"/>
    <add key="StorageRoot" value="C:\DFTemp"/>
    <add key="CopyFilesInStartRole" value="false"/>
    <add key="LogsDirName" value="DFAgentLogs" />
    <add key="EnableFileLog" value="true" />
    <add key="AgentPort" value="15098" />
    <add key="RuntimePort" value="15099" />
    <add key="AgentCallbackPort" value="15097" />
</appSettings>
</configuration>
DFService.exe.config
<configuration>
<configSections>
    <section
      name="dfservice"
      allowExeDefinition="MachineToLocalUser"
      type="Microsoft.ServiceHosting.Tools.DevelopmentFabric.DfServiceConfigurationSection, DfService, Version=1.8.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
    />
</configSections>
<dfservice
    ManagementServicePort="15095"
    RepositoryServicePort="15096"
   />
<startup>
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
</configuration>
Finally, here's what TcpView shows while the emulator is stuck:
devenv.exe   3736   TCP      MYCOMPUTER   7240   localhost   15095   SYN_SENT
devenv.exe   3736   TCP      MYCOMPUTER   7245   localhost   15095   SYN_SENT
svchost.exe   4332   TCP      MYCOMPUTER   7438   MYCOMPUTER   0   LISTENING
System        4        TCP      MYCOMPUTER   10000   MYCOMPUTER   0   LISTENING
System        4        TCP      MYCOMPUTER   10001   MYCOMPUTER   0   LISTENING
System        4        TCP      MYCOMPUTER   10002   MYCOMPUTER   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15095   MYCOMPUTER   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15096   MYCOMPUTER   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15097   MYCOMPUTER   0   LISTENING
DFAgent.exe   14472   TCP      MYCOMPUTER   15098   MYCOMPUTER   0   LISTENING
DFAgent.exe   14472   TCPV6   mycomputer   15098   mycomputer   0   LISTENING
DFAgent.exe   14472   TCPV6   mycomputer   15098   mycomputer   6399   ESTABLISHED
System        4        TCP      MYCOMPUTER   15099   MYCOMPUTER   0   LISTENING
System        4        TCPV6   mycomputer   15099   mycomputer   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15100   MYCOMPUTER   0   LISTENING
Thanks in advance for help!
▼
▲
▼
▲

Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲

One or more of cells in the battery are not functioning properly?

one or more of cells in the battery are not functioning properly
I assume this means I need a new battery? This was the message I got when I did the battery check.
The battery will not charge. Laptop just runs on AC power and battery is in but will not charge. What happens that causes cells in battery to not work? I did leave it off a few months. Would take make the battery go bad?
Thanks for any info you can give me. Have a HP G60-230US Notebook PC

Hello dlriowa,
Take a look at this document and let me know if it helps to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Apple every day is looking more alike Microsoft leaving the loyal costumers hanging by not updating EFI so 2006 inte macpro can run mountain Lion

Apple every day is looking more alike Microsoft leaving the loyal costumers hanging by not updating EFI so 2006 inte macpro can run mountain Lion

Greetings,
The EFI is not why a 2006 MACPro cannot run ML, the thing is almost an antique, when you consider how fast things move in the tech world.
No one says that you have to update to ML - I still have a G4 running plain old Leopard, and it works for me for what I need it for. I have several Macs (7) of all ages, and only three of them can run ML, but only two of them ever will, until I buy a new one.
If ML is that important to you, then it's time to upgrade - normal upgrade paths for over 90% of us is three, to four years, max, to keep up with the latest and greatest. Its Ok to keep th eolder machines for th eusual run of the mill activities, like email, surfing the web, playing music, the odd video, etc.
Cheers,
M.

Unable to refresh one or more data connections in the workbook.

Hi All,
I'm Getting below error once i refresh all the connection in Power query.
External Data Refresh Failed
An error occurred while working on the Data Model in the workbook. Please try again.
We were unable to refresh one or more data connections in this workbook.
Please Suggest..!
Regards,
Bhupinder

These data model issues can be a bit tricky to diagnose. Can you please try disabling "Load to Data Model" and then re-enabling it for the queries that are causing trouble?

I have a ASCII input feeding a value in. Each time this value falls between two numbers I want to increase the count by 1. How can I do this?

I have been trying to work this out an I am sure is is not too difficult to do, but I cant seem to get anywhere with it. If anyone could help that would be great.
Thanks
RossH

I am not currently at a PC with LabVIEW on, so Ic ant send you an example of how to do this. Instead you'll have to understand my description....
I'll assume that you want to constantly monitor the input value...
Use a while loop with a shift register to store the count value. You can initialise the count value to zero (or whatever you like) by wiring a numeric constant to it - to the left of the shift register - outside the loop. Place a case structure inside the loop and wire the shift register left to right through the false case. In the true case place the increment function and connect it between the input and output nodes you now have on the case structure. On each iteration of the loop the count value will either remain the same or be incremented b
y one depending on whats wired to the boolean input on the case structure. Now you need to detect whether your ascii value is in range. You can use the 'In range and coerce' function for this (found in the comparison function pallette). Wire the range values and the input value to it and take the boolean output to the input of the case structure. The ascii value must be acquired within the loop, so that you are checking the updated value on each iteration (or if it comes via an array you could wire the array directly to the outside of the loop and enable indexing - in this case it would be best to use a for loop). You can place an indicator on the 'count' wire to monitor its value if you wish. Remember to also place some conditional statement to stop the loop when required and also a wait function should exist inside the loop. When the loop stops, the count value will be available at the output of the shift register.
Hope this helps and is clear enough for you to implement?!

How to make a only one spectified type object running at the same time ?

I want to run specified function with java program in unix,AIX environment.But i want only one specified type object can run at this time when i make command "java xxx &" several times at this time.I had used thread but it can not work. I think there are two processes for system so it can not work. Which class or way in java can i use for this problem ? or I use thread in the wrong way.
please help me . thank you everybody !!!
ps:the command "java xxx &" mentioned above,xxx is name of java program ,
& means command run in background.

RMI is a good option you can think of. There is one registry and only one object can be bound to it with a specified name. But if your application is large, RMI calls can really slow down your application.
Another option is to use Sockets. When you load the application check if you can start a server socket on a particular port. If you can, then start the program. If not, another application is already running. So exit your program. The socket you have created will be used only to bind to a particular port. In any system, there can be only one socket bound to a port and this guarantees the single instance running. When your application closes, close the socket too.

Verizon lied to me about my bill. I will not pay ONE PENNY more as long as the phone is turned off. You are holding my health hostage. I will find a new company.

I was told if I paid the past due the phone would be left on and I could pay the rest after the first of the month. Now I am told unless I give Verizon a postdated check my phone will be off even though I made an online payment for the past due amount. I cannot make a payment until after the first of the month. I am diabetic and live in the boonies. I NEED MY PHONE. If you won't turn it back on I am left with no choice but to find another carrier. Verizon will be paid at the rate of $5 per month until paid off since I will be making payments on my new phone and can't afford both. This all started when I tried to make an online payment and it didn't go through and I didn't realize it. I didn't know the payment hadn't gone through until a month later. Verizon is too expensive and I am tired of dealing with you.

This all started when I (you) tried to make an online payment and it didn't go through and I (you) didn't realize it. I (you) didn't know the payment hadn't gone through until a month later.
How is that Verizon's fault?

"This value would cause one or more object to leave the pasteboard"

Similar Messages

Maybe you are looking for