Thorough Chart Designer documentation available? (and/or a question answered)

Today I found out about Chart Designer from Ray Camden's web site. I'm trying to get myself up to speed quickly for a project I'm trying to complete and I'm looking for any more thorough documentation than is found through the PDF that is available with the CF Server install or the WebChart web site.
I have an existing chart being generated via CF and want to know if I can access and modify it through Chart Designer or do I have to start from scratch.
Thanks!

WebCharts3D is the other name used for the application I'm wondering about.
Thanks again...

Similar Messages

Charts - Display Top Percent and Legend Layout Questions

I have two pie charts with problems. In one, I've set the Options Legend Layout to Both, Top Percent to 85, and the legend displays the top 85 percent with a count for each group, but the total of the count column is still the grand total, not the total of the 85 percent.
In the second pie chart, I have the same settings, Top Percentage and Options Legend Layout Both, but the count displays as dollar values, eventhough the field is a date field.
Does anyone know how to correct these problems?
Thanks!
Robin

hi Robin,
you've got 2 options:
a) you can use the cross-tab method that i mentioned before...a top N in the cross tab will show a percentage that is based on the whole record set as opposed to the N values...this is different than the chart legend percentage
b) if you are willing to show the percentage that is based on the whole record set in the chart labels instead, you can do the following...
if you have an On Change Of value of "country" and the summary is "sales", then create a new formula called "chart title" that has syntax similar to
{Customer.Country} + chr(10) + totext(PercentOfSum ({Customer.Last Year's Sales}, {Customer.Country}))
now change the chart On Change Of to your new formula. the percentage based on the whole record set will be shown in the chart labels.
cheers,
jamie
Edited by: Jamie Wiseman on Nov 25, 2009 1:34 PM
Edited by: Jamie Wiseman on Nov 25, 2009 1:35 PM

General Design With Database and Session Bean Question

I have an application I am developing where users connect to individual databases located on a server. When they login an admin table is accessed which shows what databases they have permissions to. I am then storing the connection to the database in a backing bean. Hoping to use this connection throughout the session. Is this a good practice to have a users connection left open over the session? I can't create a database pool for each individual database and each user for that database.
If I can store that database connection in a session bean. How do I access that connection from another bean. Or from another java class? I am using Glassfish for my application server with JSF1.2. I have looked at resource injection but have not had any luck with sharing the session bean information.
Sorry if this is a trivial question. I have been a Java developer for years. But just starting developing webapps using JSF.
Thanks

JuCobb2 wrote:
I am then storing the connection to the database in a backing bean. Hoping to use this connection throughout the session. Is this a good practice to have a users connection left open over the session? No it is not. Why should you do so? Always keep the lifetime of connection, statement and resultset as short as possible.

Chart designer

Dear colleagues,
where can I find documentations to the Chart designer and classes cl_gui_chart_engine and cl_igs_chart_engine ? Are there any exercise programs too ?
Thanks a lot and kind regards
Peter

hiee
Peter Szakonyi
have a look at the tcodes -1. DWDM
2. ABAPDOCU
Hope these help you out .
Thanks
Lokesh

BPC Design Documentation

Hi all
Are there any Design Documentation about implementing BPC available
Thanks

Hi,
You can try at this site
http://www.sap.com/usa/solutions/sapbusinessobjects/large/enterprise-performance-management/planningandconsolidation/brochures/index.epx
and
https://www.sdn.sap.com/irj/scn/wiki?path=/x/zb4
Hope it helps.

Designing the consolidated and line item report for specific material

Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
<b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
kumar

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

HT3669 I have an Epsom 1250 photo scanner that will not work with my new iMac. I get an error report indicating 'scanner ot available' and the indicator light on the scanner goes to red.

When I try to use the scanner I get error message 'scanner not available' and the scanner indicator goes red . I have contacted Epsom who advised me to run System update on my Mac several times which I havedone to no avail. The scanner is in working order as it works satifactorily with my 'Windows' laptop. The scanner is listed as being included in the driver updates but It would appear that the driver on my iMac supplied in any update is not suitable.
I am currently running OSX 10.8.4
What steps should I now persue to be able to use the scanner?
Alan.

Howdy Susiesdad,
I would suggest the troubleshooting steps from this article named Troubleshooting printer issues in OS X found here http://support.apple.com/kb/ts3147
Don't let the name throw you off, the troubleshooting is relevant for scanners as well.
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
All the best,
Sterling

Custom Color Palette - Chart Designer

Hi all, I need to change the colors that my pie chart uses. You can do this in chart designer under the global settings section. The property, color pallete has 4 selectable entries, Frog, Streamline, Tradeshow, and Custom. By selecting "Custom", this means that I can choose the exact colors that I want to use, right? If so, where and how do I specify the colors for my custom color palette. Any reply would be appreciated. Thanks.
Regards,
Rich Heilman

Hi Rich,
Did you go through my post here https://www.sdn.sap.com/irj/sdn/profile?userid=397656 ? I`m not 100% sure that you are able to do this using only Chart Designer. The problem is that you need association between series data id in cutomization XML and data XML. If you know such id on design time, you can re-design my example by moving generated piece of XML from WD to static customizing XML.
Best regards, Maksim Rashchynski.

Problem with chart design

Hi
I am experiencing a problem with the output of a line chart that I am creating in APEX. Its labels (X-axis) are dates, but they do not seem to fit entirely into the lenght of the x-axis (all the ones that I have ordered in the sql expression). Also, I needed to place these dates in a vertical position, for which I cannot find any parameter. The sql is as follows:
select null link, DATA_REGISTO label, Total value
from (select DATA_REGISTO, TOTAL_SEQ_URGENCIA as Total FROM "ANDRE"."HTIDISTSIMPLIF"
where
DATA_REGISTO = '06.01.01'
or DATA_REGISTO = '06.01.08'
or DATA_REGISTO = '06.01.15'
or DATA_REGISTO = '06.01.22'
or DATA_REGISTO = '06.01.29'
or DATA_REGISTO = '06.02.05'
or DATA_REGISTO = '06.02.12'
or DATA_REGISTO = '06.02.19'
or DATA_REGISTO = '06.02.26'
or DATA_REGISTO = '06.03.05'
or DATA_REGISTO = '06.03.12'
or DATA_REGISTO = '06.03.19'
or DATA_REGISTO = '06.03.26'
or DATA_REGISTO = '06.04.02'
or DATA_REGISTO = '06.04.09'
or DATA_REGISTO = '06.04.16'
or DATA_REGISTO = '06.04.23'
or DATA_REGISTO = '06.04.30'
or DATA_REGISTO = '06.05.07'
or DATA_REGISTO = '06.05.14'
or DATA_REGISTO = '06.05.21'
or DATA_REGISTO = '06.05.28'
or DATA_REGISTO = '06.06.04'
or DATA_REGISTO = '06.06.11'
or DATA_REGISTO = '06.06.18'
or DATA_REGISTO = '06.06.25'
or DATA_REGISTO = '06.07.02'
or DATA_REGISTO = '06.07.09'
or DATA_REGISTO = '06.07.16'
or DATA_REGISTO = '06.07.23'
or DATA_REGISTO = '06.07.30'
or DATA_REGISTO = '06.08.06'
or DATA_REGISTO = '06.08.13'
or DATA_REGISTO = '06.08.20'
or DATA_REGISTO = '06.08.27'
or DATA_REGISTO = '06.09.03'
or DATA_REGISTO = '06.09.10'
or DATA_REGISTO = '06.09.17'
or DATA_REGISTO = '06.09.24'
or DATA_REGISTO = '06.10.01'
or DATA_REGISTO = '06.10.08'
or DATA_REGISTO = '06.10.15'
or DATA_REGISTO = '06.10.22'
or DATA_REGISTO = '06.10.29'
or DATA_REGISTO = '06.11.05'
or DATA_REGISTO = '06.11.12'
or DATA_REGISTO = '06.11.19'
or DATA_REGISTO = '06.11.26'
or DATA_REGISTO = '06.12.03'
or DATA_REGISTO = '06.12.10'
or DATA_REGISTO = '06.12.17'
or DATA_REGISTO = '06.12.24'
or DATA_REGISTO = '06.12.31'
order by DATA_REGISTO)
How can I do this?
Thanks in advance
Andre

Hi Frank,
I'm creating some SEM Management Cockpit, the problem I faced is not the BEx Query itself, but the pie chart design and display. I have processed my data in advance, so there a only 5 values in my query at a time, and these area values are not constant values. If I don't mark a selection criteria, it will display a full pie in Management Cockpit.
And if I browse the query in IE directory, I can get a desired pie chart by "Swap Axes", so I think maybe there is a same choose in Management Cockpit.
Thank you and Best Regards,
Rocket

How to master good design with EJB and JSP?

I use JSP to calling EJB. But the .jsp file is complex and it's difficult to maintain...I just want to work higher efficent with EJB,JSP and JavaBean. I want to know is there a good design with EJB and JSP? and is there any good material about MVC for EJB,JSP and JavaBean?

You should read the J2EE blueprint available on this website. Better download the PDF, and print it for yourself so you can read it anytime.

Portlet gives ERROR: Content not available and log says FileNotFoundExcepti

I'm trying to deploy my 'works on JBoss' portlets onto portlet server 7.2
I uses psadmin register-portlets... to load my ear file with the portlets
I went into 'Add New Channel or Container' and picked the sandbox and 'channel'
Step 1.1 I picked JSR 168 or 268
Step 2 I could see my portlets in the drop down so I picked one
That seemed to work fine.
Then I went into 'design desktop layout' and I picked my portlet from the list there and put it onto the sandbox
Looking good. There were some odd warning errors in the log referring to JSF which don't look relevant so I ignored them (see below)
Next I logged into sanbox and all I see are two frames (I added two portlets) both saying ERROR: Content not available
In my log I have two identical errors:
2008-11-21T17:17:35.875+1300|SEVERE|sun-appserver9.1|javax.enterprise.system.container.web|_ThreadID=33;_ThreadName=com.sun.portal.desktop.context.ReusableProviderCaller;_RequestID=2cb012a6-0fbc-498a-9ecd-02efae5c854a;|ApplicationDispatcher[] PWC1231: Servlet.service() for servlet default threw exception
java.io.FileNotFoundException: /servlet/PortletAppEngineServlet
     at org.apache.catalina.servlets.DefaultServlet.serveResource(DefaultServlet.java:732)
     at org.apache.catalina.servlets.DefaultServlet.doGet(DefaultServlet.java:384)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:718)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
     at org.apache.catalina.core.ApplicationDispatcher.doInvoke(ApplicationDispatcher.java:855)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:703)
     at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:660)
     at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:578)
     at com.sun.portal.portletcontainer.impl.PortletContainer.invokePAE(PortletContainer.java:790)
     at com.sun.portal.portletcontainer.impl.PortletContainer.invokePAE(PortletContainer.java:673)
     at com.sun.portal.portletcontainer.impl.PortletContainer.getMarkup(PortletContainer.java:209)
     at com.sun.portal.providers.window.WindowProvider.getPortletContent(WindowProvider.java:382)
     at com.sun.portal.providers.window.WindowProvider.getContentInternal(WindowProvider.java:247)
     at com.sun.portal.providers.window.WindowProvider.getContent(WindowProvider.java:212)
     at com.sun.portal.providers.portletwindow.PortletWindowProvider.getContent(PortletWindowProvider.java:109)
     at com.sun.portal.desktop.context.ReusableProviderCaller.run(ReusableProviderCaller.java:206)Earlier in the log I can see:
[#|2008-11-21T17:17:14.343+1300|WARNING|sun-appserver9.1|javax.enterprise.resource.webcontainer.jsf.application|_ThreadID=26;_ThreadName=httpSSLWorkerThread-8080-3;/faces/desktop/Library.jsp;/faces;_RequestID=eaa404b5-8589-4873-940e-4146d603277e;|JSF1015: Request path '/faces/desktop/Library.jsp' begins with one or more occurrences of the FacesServlet prefix path mapping '/faces'.|#]
#|2008-11-21T17:28:18.453+1300|INFO|sun-appserver9.1|javax.enterprise.system.stream.out|_ThreadID=24;_ThreadName=httpSSLWorkerThread-8080-4;|
com.sun.web.ui.component.DropDown::The current value of component frm:createChannel:step2:sheet2:section1:p2:providers does not match any of the selections.
Did you forget to reset the value after changing the options? |#]Those don't mean anything to me but they look like the console is complaining about something internal.
Where did I go wrong here? I did not deploy the ear file normally, just ran the psadmin. Do I need to do both? Is there some other step I missed?
Thanks for any help

As you can see from docs - http://docs.sun.com/app/docs/doc/820-2052/gdela register-portlet is supported for EAR files generated by JCAPS tools. In you case you need to manually add the portal required artifacts. In case of WAR this is handled by deploy-portlet command. I don't remember exact artifacts that were added in PS7.2 portlet deployment. You can deploy a WAR and see the artifacts that will be added and the entry in web.xml as well.
Regards,
Deepak

Is any documentation available for OBIEE Spatial analytics sample??

Hi All ,
We are currently working on creating a demo wherein we want to enable users to drill on various hierarchies over world map. We are trying to achieve the same using SampleApp (v305) but have hit some roadblocks.
We could not find a document that explains the relationship between the tables of the Spatial Schema. Is there such documentation available?
We are unable to understand how is spatial data created and how to represent common sales analytics data using spatial data?
Is there any document explaining the steps taken to build the sample application map reports?
Is there a way to alter/customize spatial data based on specific requirements i.e. Interchanging certain cities within States etc?
Any help on the above issue ???

It is out now
http://developer.microsoftband.com/

Pie chart with both text and value

Hi,
I want the pie chart to contain both the text and value how is this possible when I look at the optiond for chart I was able to select only one thing at a time both not both the things at a time ,please let me know how is this possible
Thanks
Priya

Hi Priya,
this should be possible. In the Chart Designer in the properties of the Categories you must edit the Format string to e.g. "$Label$br0.00" (show the label, make a line break, show the value with 2 decimals). For more info regarding the format string see note <a href="http://service.sap.com/sap/support/notes/1064448">1064448</a>.
Best regards
Matthias

Report Designer is slow and does not update info.

I am working with Report Designer.
It is running very slow. For first few minutes it runs fine and after that it slows down.
It is only Report Designer which is slow- Query Designer, BEx Analyzer and other applications are running fine.
Does anyone have any idea please?
I also have some other issue with Report Designer.
I created queries in Query Designer and then formatted in report Designer. Now they want to add one more column or row in query. I add that in Query designer but it does not show in report designer.
It does show under Query Element but I donu2019t how to populate whole row and column.
Can someone assist me that how to bring in report designer?
Thanks

Bashir,
make sure that you have the latest SP of SAP GUI installed - it is available in
service.sap.com/swdc under frontend components.
Arun

Chart Design issue

Hi guys,
i have this issue , my bex report is
0fisscper material NI (net invoicing)
i need a chart with x axis as time and the materials in each catergory
how could this be done (materials have to be in series) in Bex or WAD
Thanks,
Vijay

Hi Realist,
You can create in both Bex and WAD
In Bex tool bar you have an option called Layout --> in that go to Attach Chart --> and then right click on chart you will see
1.Chart Type --> You can pic different types of charts
2.Source Data --> Here you can select Series and Add materials & remove other Key Figs
3.Chart options --> gives you to customise the chart design by naming X and Y axis
In WAD
Go to Tools --> Wizard --> click Next --> select Chart --> Add your Query in Query View --> and go ahead with designing..
If you want to see your chart in web or Portal then WAD will be the Better option
Hope this helps,
Thanks,
Sudhakar.

Thorough Chart Designer documentation available? (and/or a question answered)

Similar Messages

Maybe you are looking for