Those two pieces, where LCD and keyboard installed doesn't match when close

when i close MacBook, push the LCD back to keyboard.
the top piece has a 3mm offset. I means, it like this
ooooooo
_ooooooo
but it should be
ooooooo
ooooooo
i was try to push the top layer to normal position, but not works.
it was good before, i don't know why it start shift.

Similar Messages

Using trial version of Lightroom and photoshop. Plan to buy. but i have a question: I have two computers a desktop and a laptop that i use when i travel can the programs be installed in both computers?

Using trial version of Lightroom and photoshop. Plan to buy. but i have a question: I have two computers a desktop and a laptop that i use when traelling. Can i download the programs on both computers?

Check the end user licensing agreement at End-user license agreements FAQ

I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

grannybel
It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
But, while the arrangements are being made, here are a few things for you to think about if you have not already
1. Reset Tools - Select Brush Tool, then
2. Delete Settings File
Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
We will be watching for your progress.
Thank you.
ATR

Hi skydiver, I have ios7.4, I tried two different USB ports and it still doesn't show,up on my desktops in my computer as iPad so I can't click it. If it was there I would open and see all my photos, and YES it ask me DO I trust this computer! several tim

Hi skydiver, I have ios7.4, I tried two different USB ports and it still doesn't show,up on my desktop in my computer as iPad so I can't click it. If it was there I would open and see all my photos, and YES it ask me DO I trust this computer! several times.
The apple tech on the phone, went to my control,panel
Went to my devices. Original iPad showed up,there In red and then he had me go,to apple website, download something and it said it could configure to my computer.
Is,finally answer,to me was go to the apple care,one on one appointment, and it's my "software"
A man I know told me "Apple at store, won't be able to do,anything for me"
That's not very positive.
What else? Can't I download iPad drivers,into my computer?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

I Have a Mac 10.9.5 I have Photoshop CS 5.. Also have Photoshop CC. As of last month was able to edit any image with either program,as of today I can't edit images in either program. I can't see and editing I've done ,but when close the image both program

I Have a Mac 10.9.5 I have Photoshop CS 5.. Also have Photoshop CC. As of last month was able to edit any image with either program,as of today I can't edit images in either program. I can't see and editing I've done ,but when close the image both program ask (do you want to save changes) I look at the image I don't see any changes to save. Please help Thanks for time in advance

Please describe the steps involved in the issue exactly (with screenshots maybe).
What have you done for trouble-shooting so far?
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

My iPad takes hours to charge even when I turn it off I have bought like 6 chargers and my iPads been sent back twice and it still doesn't work when I'm charging it

My iPad takes hours to charge even when I turn it off I have bought like 6 chargers and my iPads been sent back twice and it still doesn't work when I'm charging it what do I do ??

I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times.

Wireless Mouse and Keyboard Install Problem

I am trying to install my wireless keyboard and mouse onto my Mac OS X 10.3.9. My dad had this computer before me and had the mouse and keyboard paired and working. After it was shipped to me, I attempted to pair these again with no luck. THe bluetooth won't recognize either and if i try and run the KeyboardandMouse.pkg as instructed, the icon simply isn't there when I insert the disk. I've attempted to pair using the system preferences, but it cannot locate either the keyboard and mouse. Yes, I do have new batteries installed and the lights do blink when switched on. Any help is appreciated. Thanks.

Hello again:
Try trashing the BT preference file (com.apple.bluetooth.plist) and restarting.
If that does not work (although it will take you a bit of time), I think I would try an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Barry

Version of kernel installed doesn't match what's running

This seems to me a very newbish question... I've just run `sudo pacman -Syu` to upgrade my system, and it seemingly went fine. When I reboot, the list of running kernel modules is much much smaller, the text on my screen is much bigger (suggesting a video driver switch?) and the kernel seemingly hasn't upgraded (`uname -a` still reports 3.16.1-1, instead of 3.16.3-1). Anybody know what gives? It's probably a simple solution, but I can't figure it out... thanks for reading.

There are a lot of threads around here where that is the root cause of a lot of problems. The most common reason for that is that your boot partition was not mounted at /boot when you did the update. That means that your new kernel is in the directory /boot, but the kernel that was loaded by your boot loader is on your boot partition.
Look at /boot.
Mount the boot partition on /boot
Look at /boot
Did the contents change? If yes, do a pacman -Syu and ensure that your /etc/fstab is configured to mount that partition by defualt
Edit: Moving to Newbie corner
Last edited by ewaller (2014-10-06 00:08:54)

Sometimes my screen starts to move on my iMac. It's like it's trying to turn the page and it gets off center and the mouse doesn't work when it happens. It usually lasts about 15 seconds or so and happens often.

Sometimes the screen on my imac starts to shake like it it trying to "go to the next page". When this happens it usually freezes up for 15 seconds or so and the mouse doesn't work.

Have you tried a hard reset of the iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, work through each of the troubleshooting suggestions in this Apple support document as necessary.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Best Way to Hook-up Two Monitors - an LCD and CRT.

I have two monitors, a Samsung SyncMaster 940BX LCD with DVI and VGA ports, the other a Viewsonic CRT with VGA port that I use as a palette monitor.
Which is the best (most reliable) port on the Mac Mini to use for a VGA monitor, the Mini-DVI Port or the Mini DisplayPort? I have a Mini-DVI Port to VGA adapter from my PowerBook that I can use if needed, and will order whatever Mini DisplayPort adapter that I may need. Thanks.

I would think that starting from DVI would be the better choice for running a VGA display. I say this because analog VGA output is part of the DVI standard, so it is accounted for, should be mature technology and should work.
DisplayPort, on the other hand, does not account for any VGA output. It is a strictly digital standard. Apple has created an adapter that has active electronics inside that uses digital signals for input and does a digital to VGA translation within the confines of the adapter. Strange but true.
From reading these forums over the years, one thing I have learned is there is no such thing as a sure thing. Some people report better results from the DVI port when running VGA and others say they could only get their VGA display to work from DisplayPort. So it seems it can depend on the display, too. In that case, you are probably stuck using trial and error to see what will work best for your setup because it's unlikely anyone else is going to have exactly the same two monitors you do.

New LCD and Keyboard for T400?

All right folks.. what is this screen:
FRU: 42T0705 (1280x800 LED ) LG,Samsung, Chi-mie... earlier I had read that 42T0701 is LG.. but this is a new part?
FRU: 42T4034 (which keyboard is this?)
Thanks for any help.

It's not clear what you are asking. If you're asking if you can take them parts you bought yourself and have them install them, no. Apple does not repair iPhones. They replace them.
There are NO legitimate sources for iPhone parts. Apple does not sell parts.

My keyboard and my mouse doesn't work when I want to install windows on my mac.

Hi,
I have a macbook 15 retina, 2.5 GHz Intel Core i7, 16 Memory Go 1600 MHz DDR3, OS X 10.9.5 (13F34).
I'm trying to install Bootcamp, but when they ask me to choose the language I'm not able to move or write. So I can't install windows. I tried to do everything from the beginnig 3 times by following carefully each step. I'm using windows 7 professionnal to install boorcamp. I'm sorry with my english, I'm french speaker.
How can I resolve this problem?

1. Did you use Bootcamp Assistant?
2. Did you build a USB with Windows 7 ISO and Bootcamp drivers?
3. You should use a USB2.0 disk, not a USB3.0 disk (flash drive).
4. What year is the Retina MBP?

Every single extension I have is broken. Uninstalling and re-installing doesn't work either. They say they'll be updated when Firefox is restarted, but I can't even open the preferences for each plug-in.

Not a solitary extension is working. Many of them say that they'll be updated when Firefox is restarted; some of them ostensibly appear to be working, but clicking on the 'preferences' button provokes no response. I have Firefox 3.6.13. I've tried uninstalling and then re-installing one of the extensions (Stumbleupon) but to no avail. Do I need to be re-installing Firefox here?

This can happen if one of the files that stores details on installed extensions is corrupt. To fix that see the section on corrupt extension files in the [[Unable to install add-ons]] article.

Those two pieces, where LCD and keyboard installed doesn't match when close

Similar Messages

Maybe you are looking for