Those who have problem with update ANNA read this....

Backup All Music video contacts and everything except settings and Applications..
first then download and install ANNA via NSU or OVI suit, and update it..
then goto file mgr. and format mass memory..
Then do hard reset http://www.gfcforum.com/images/imported/2011/03/23.jpg (check the image)
then goto phone in-built software updater and update ANNA 1 and 2...
after if u want tick and update everything else (OVI suit, Social, NFC plus game)..
Good Luck!!!

There is nothing on Fusion Community in the way of FAQ regarding Lion and bumping Windows partition +1 ( due to presence of a recovery partition added0.
A quick check of VMware Fusion turns up a thread or two (-:
Boot Camp partitions may not be accessible through Fusion after upgrading to Lion.
To work around this issue, delete the Boot Camp virtual machine from the library and recreate it. For more information, see
A Boot Camp virtual machine fails to power on with a disk error (1003483).
A Boot Camp virtual machine fails to power on with a disk error (1003483)
VMware Fusion 3 support for Mac OS X Lion (10.7) (2003715)
VMware Communities: Fusion 3.1.3 and OS X Lion
There may be other issues with Windows and changes that need to be addressed to dual boot Windows natively.

Similar Messages

Who have problem with your bootcamp after this instalation?

I use VMware software and after the instalation i receive this advertise:Cannot open the disk/Users/leofernandoz..../Libary/Application Suport/VMware Fusion/Virutal Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmdk"or one of the snapsohot disks it depends on.
Reason: The partition table on the physical disk has changed since the disk was created. Remove the physical disk from the virtual machine, then add it again.
What the best and easiest solution for it?

There is nothing on Fusion Community in the way of FAQ regarding Lion and bumping Windows partition +1 ( due to presence of a recovery partition added0.
A quick check of VMware Fusion turns up a thread or two (-:
Boot Camp partitions may not be accessible through Fusion after upgrading to Lion.
To work around this issue, delete the Boot Camp virtual machine from the library and recreate it. For more information, see
A Boot Camp virtual machine fails to power on with a disk error (1003483).
A Boot Camp virtual machine fails to power on with a disk error (1003483)
VMware Fusion 3 support for Mac OS X Lion (10.7) (2003715)
VMware Communities: Fusion 3.1.3 and OS X Lion
There may be other issues with Windows and changes that need to be addressed to dual boot Windows natively.

For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

Problem with updating Adobe reader 9.4.6.252

Hi, I am new at this so here goes.
I am having a problem with downloading Adobe Reader 9.4.7. Every time I start the update it freezers my entire computer.
The only way of fixing the problem that I have found that works is to turn the entire computer off.
I am running with windows XP SP3.
Can anybody help please.
At present I have Version 9.4.6.252 Adobe Reader

Then you may want to try the following:
Run this fix from Microsoft: http://support.microsoft.com/mats/Program_Install_and_Uninstall
Uninstall all traces of any versions of Reader using Add/Remove Programs
If you want to reinstall Reader, download it from http://get.adobe.com/reader/enterprise/

Why does my laptop have problems with USB card reader?

I have a PowerBook G4, and I connect a multi-slot card reader to a USB port to read CompactFlash media. I have two problems with it and wonder if anyone can help.
1) When I "eject" the media, then physically remove the media from the card reader, I occasionally get a "Media not removed properly" alert message. I always wait several seconds after the media icon has disappeared from the desktop before removing the media. I can't seem to reproduce this on demand, but it appears to be happening more frequently.
2) Once the media has been removed from the card reader, the computer no longer recognizes it when it is reinserted into the card reader. I have to unplug the card reader from the USB port, then plug it back before the media is recognized.
Any ideas how to resolve these issues?

1) Wait longer. It can sometimes be necessary to wait as long as 15 seconds. I've never seen a good explanation of why.
2) Are you plugging the reader directly into a USB port on the Powerbook? Are any other bus-powered USB devices connected simultaneously? If so, disconnect them and test again. If you have an AC-powered USB hub available (or can borrow one), try plugging that into the computer and the reader into the hub. (Don't use a bus-powered hub.)

HT2693 I have problem with Adobe acrobet reader

I can't read PDF files eventhough I have installed the updated version of adobe reader. So I need for your urgent need my friends

You must have a Mac. Try this.
Quit Bridge, from user library (NOT system and root library) preferences folder find and delete the com.adobe.bridge5.plist file manual. Do this also in same user library caches folder (Caches/Adobe/Bridge CS6) and inhere find and the folder called 'cache' and drag it to the trash.
restart Bridge holding down option key and choose reset preferences, then try again.

Solve Problem with USB Connection / Read this it i...

i can not load maps on my n97 mini. the error 'usb connection lost...' show on the screen in map loader but at the first day i had no problems.
i wonder why. i look for driver, ovi suite, pc suite, usb at the pc, read in the forum and many more. but nothing solve the problem. after 2 days i use accidentally the original cable which comes with the nokia n97 mini (it is a ca-101) and all my problems are gone ! bevor i use an 'old' ca-101 cabel from my n82 and i can not upload a map but the handy is shown in the pc system with all drivers and no problems. only loading big megabytes data on the handy crashes the usb connection. with the n97 mini ca-101 cabel no problem with gigabytes. i look for another ca-101 cable from the 6220 from my wife and i have the same problems (i never used bevor this cable for a connection to any handy ! it was brand new !). it seems that 'old' ca-101 cabels do not handle big data with the n97 mini. i look on the gold spring clips in the micro usb and could see that the are a little smaller and not so high in the jack in the 'old' cables. all three cables are original from nokia and not from china ! if you are also problems look on the produkt id on the plastics. if the letters are gold you have a cable like my n97 mini cable, but if the letters are black on a silver button you have an 'old' cable.
i hope i can help another with this maniac problem
greetings

I can verify this on win7 with latest PC suite.
I was using the cable that came with my 6500s as I didn't want to tackle the rats nest of wiring behind my pc.
This cable is a ca101 with silver writing on the plastic tab, made in China.
Using this cable, my 6620c would not complete a backup, it would just sit for hours on 2-4%.
Tested with the ca101 cable that came with the 6620c (gold writing, made in Thailand).
This time the backup completed in about 2 minutes.
Thank you so much for finding this, it has been driving me crazy!

Have problem with update AsyncOS

We have proxy ISA 2006
and we have Ironport C150
ISA proxy authenticated users
but when i fill field parametrs user and password
our proxy logs showed not authorize /// user:anonymouse connect to update server.
Im reading about password policy not supprted symbol"#"
help me pls ...

Hello,
I'm not sure what you meant with
password policy not supprted symbol"#" "
is there a # char in your PW or do you mean something else?
A few tips:
1) Did you try to enter your username just plain or in the domainname\userID style? The latter should normally work.
2) Try to use a userID and PW that only exists of "normal" chars (a-z/A-Z/0-9). If you Windows password policy do not allow those simple passwords, get in contact with your NT Adminteam and ask if you can get an exception for a short while. Within that short period you can use a "simple" PW and verify if the complex chars in your PW are the problem or not. (If these chars appear to be the problem, please raise a support case to find out what chars are accepted).
3) make sure you use the correct TCP port for connecting to your proxy
4) make sure the proxy does allow large (enough) files. The Ironport updates can be quite large; some AV scanning add-on products might block this.
5) Ask you proxy admin to check his log files. Maybe some useful info can be found there.
Hope this helps!
Steven

I have problems with updating to cloud 2014, 2 errors on some applications. one is about C which I do not use

I get the following error messages
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\Eva\AppData\Local\Temp\{5D0DC227-F565-4927-BF7D-A4F91850A21B}\Flash_Professiona l_14_LS20\Adobe Flash Professional CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com
any idea hoiw to proceed?

Unfortunately the steps described on that page were either unnecessary or would have actually downgraded the VC++ Redistribution Package on my system. Booting in modified/diagnostic mode would not have made any difference, except that it would have resulted in a CC restart and therefor might have appeared to work. I suggested a CC restart because it worked for me and others. When I got the error, I analyzed what the install error 6 actually said, which is that it failed trying to "repair Microsoft Visual C++ 2012 Redistributable Package (x64)". Since I already have a later version of that VC++ package properly installed on my system, it is a Good Thing that it did fail. It just should have failed more elegantly. It might well work on systems with older versions of the VC++ package.

For all those who have trouble with their router. STICCY THIS!

1.) Clicc HERE
(ftp://ftp.linksys.com/pub/network/)
and download the file named "tftp.exe".
2.) Clicc HERE and download YOUR, AND I REPEAT YOUR AND I MUST REPEAT AGAIN, YOUR ROUTER'S LATEST FIRMWARE. Please for the love a God, Allah, Jah, or whoever you look up to. PLEASE PLEASE PLEASE DOWNLOAD THE RIGHT FIRMWARE. If you don't know what version or model router you have, look at your router's home page or you can actually look at your router with your eye. Voila! You now know your router's model/version. Download the lastest firmware for your router.
-----------------------**IMPORTANT**------------------------------------------------*************-------------------------
It is strongly suggested that you remove all connections from your router except the one for the computer you are using! Not removing the other connections from the router can cause a corrupted firmware, and the dreaded flashing diag light.
3.) Double clicc on/open up the TFTP.exe file. Enter your password (admin if you haven't changed it), use the browse feature to find the (latest)firmware you just downloaded. Then, click on "upgrade". You should see a progress bar, then the message that you have successfully upgraded your router.

I have a WRT54G ver.6. It works perfectly with a windowns PC but not for my Mac. I have high signal but no internet. Do you know if this model is not compatible with Macs? thank you Simone

Problem with updating Adobe Reader in my LENOVO.

the installing in my lenovo had an errore. i try to uninstall all the abobe application. and it didn't work. what can i do?

The OS is Win 7 Home Premium with Service Pack 1,
and the Reader is X (10.1.8).
The uninstall stop with 'ERROR 1305' about reading //////ppklite.api/

To people who have problem wif updating iOS5

i was updating my iphone 4 to iOS 5
my phone turn to brick like everyone did
but some mircle happened.
while i was giving up on the update and went to do sumthin else it
it fix up itself (my phone was wired to my PC.)
so what i am trying to say is maybe try leave your phone alone for few mins up to half and hr after clicking the restore buttom
maybe it will update itself..
i was so disapointed wif apple when my phone was turn into brick
"Steve job please come back and FIX your company!!"
Sorry for my bad english!!

I tried update software to v.6.10..I can't continue to proceed 'caus in the middle of process appear "Connection Lost...firewall..." I don't anderstood..internet connecton firewall is off. data cable still connecting...If any suggestion...please help. tks.

I HAVE PROBLEM WITH UPDATE IN NOKIA N86

Hello I'm having trouble to update the Nokia N86
At first things are correctly but then fails to update
I use the Nokia OVI and error code 12 017
I hope to help me as soon as possible
Look at the attachments
Attachments:
1.PNG ‏17 KB
3.PNG ‏18 KB
2.PNG ‏28 KB

Hi, I did some searching here at the forum and found this post. Seems that a possible way to update could be using the stand alone program "Nokia software updater" and if it fails too, like the post linked to below, you can run it in compatibility mode, and as an admin.
Take a look here and give it a try if you cannot get Ovi suite working:/t5/Software-Updates/E75-update-using-ovi-suite-always-errors-12017/m-p/879597#M83558

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

Those who have problem with update ANNA read this....

Similar Messages

Maybe you are looking for