Though videos (YouTube) play correctly, the sound is terrible.

Yes, I have installed Adobe Flash Player 10. The video is great, but the sound is terrible. It varies in speed and volume, there is static-just awful.

Make sure that you allow the plugin-container process in the firewall.
See also:
*http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

Similar Messages

Cannot get videos to play correctly - the sound works, but screen stays green. If I then hit "replay" the video works correctly- 1 time. Help!

mostly imbedded videos and youtube cause this problem. However, some of the news sites have commercials that work fine, but when the commercial is over, the green screen comes back. Windows 7 -64 bit- updated firefox to 6.0 beta with same results

Make sure that you allow the plugin-container process in the firewall.
See also:
*http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins

Video not playing correctly but sound on the videos does

Hey all. Question for you. Recently my iPod has decided to stop playing the videos shows. The display only shows a picture of the show title (much like the cover art of songs) and the audio plays as if it were playing normally. The files seem good because I can play them on iTunes from the iPod. I can't think of anything differently I have done to it in the last few weeks. It just stopped working suddenly. Any ideas? ANd thanks in advance.

On your iPod go to "Videos / Video Settings".
Then select "TV Out" and either set it to "off" or "ask".
Also, make sure you are accessing the video through the videos menu. If you have a video mixed in an audio playlist and you access it through that, you also won't be able to see the video.

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

Youtube videos not playing correctly

Windows 7 64-bit Flash Player 11.7.700.169 videos in youtube don't play correctly, the image is super zoomed in and grainy. anyone know what's wrong?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
*http://helpx.adobe.com/flash-player/kb/common-problems-flash-player.html

HT204291 When using my iPad and playing videos, I only hear the sound. Why will it not show the video?

When using my iPad and playing videos, I only hear the sound. Why will it not show the video? My iPad 2 and iPhone 5 work no issues.

Hi sheilafrommannford,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the links to see more details and screenshots.
Using AirPlay
http://support.apple.com/kb/HT4437
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
Judy

Can I import and play just the sound track from a video?

I downloaded some video clips with sound and imported them as QT videos into i-tunes - no problem. But how can I now play just the sound track and import it into a music playlist so I can play it on my Ipod in the car? (Or if I put the video on my Ipod - it's a sound only one, not a video one - will it just play the sound track?)
Thanks

Without knowing anything about the nature of the video files you're talking about, all I can say is that if they contain audio, you can extract it. The process may not be lossless, unless you extract the audio and convert it to Apple Lossless, WAV or AIFF. If your iPod is an older one, you may be limited in the formats you can play.
For a simple way to extract the audio only, you can use the Streaming/Exporting Wizard in VLC. You can also, depending on the format of the source movie, export audio with Toast or even iMovie to formats compatible with iPods.

HT201343 my video plays but the sound only comes out of my computer not my tv???

my video plays but the sound only comes out of my computer not my tv???

I have tried to connect and Jambox and have the same problem; bluetooth speakers are connected and chosen but sound comes out of computer speakers.

Why when I try to play an avi video on my iMac the sound works but why not the picture?

Why when I try to play an avi video on my iMac the sound works but not the picture? I need codecs but xvid doesn't support Macs.
Maybe I should figure out if and how to use torrents and forget about using QuickTime.

Try VLC, can play almost any format known to man...
http://www.videolan.org/vlc/
Or you can install the Perian extension to Quicktime to allow for Xvid playback.....
http://perian.org/

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How do i get my itunes videos to play correctly

i updated my itunes to 10.7 and now when i try to watch shows i downloaded from itunes they will play for a little while then the video will freeze and the sound will cut out and several seconds later it will start playing from the point in the video it would have been at if it never froze
i have a hewlett-packard presario CQ56 notebook pc on windows 7 home premium with an AMD V140 processor 2.30 GHz and a 64 big operating system if that helps

To clarify, this is a problem happening on my pc laptop. I have Windows Vista. I just tried re-installing iTunes with the latest download version and that hasn't fixed the problem either. I will log off and back on once and see if that helps. Not sure what other information to provide to help me with this issue.

Wat video format plays on the touch?

wat video format plays on the touch? i got some mp4s on my itunes and it wont sync... it says "syncing your ipod" for less then a sec and nothing happens. Do i need to convert them to another format???

From the iPod Touch Feature Guide:
If you can’t add or play a song, video, or other item
The media may have been encoded in a format that iPod touch doesn’t support.
The following audio file formats are supported by iPod touch. These include formats for
audiobooks and podcasting:
* AAC (M4A, M4B, M4P, up to 320 Kbps)
* Apple Lossless (a high-quality compressed format)
* MP3 (up to 320 Kbps)
* MP3 Variable Bit Rate (VBR)
* WAV
* AA (audible.com spoken word, formats 2, 3, and 4)
* AIFF
The following video file formats are supported by iPod touch:
* H.264 (Baseline Profile Level 3.0)
* MPEG-4 (Simple Profile)
A song encoded using Apple Lossless format has full CD-quality sound, but takes up
only about half as much space as a song encoded using AIFF or WAV format. The same
song encoded in AAC or MP3 format takes up even less space. When you import music
from a CD using iTunes, it is converted to AAC format by default.
Using iTunes for Windows, you can convert nonprotected WMA files to AAC or MP3
format. This can be useful if you have a library of music encoded in WMA format.
iPod touch does not support WMA, MPEG Layer 1, MPEG Layer 2 audio files,
or audible.com format 1.
If you have a song or video in your iTunes library that isn’t supported by iPod touch,
you may be able to convert it to a format iPod touch supports. See iTunes Help for
more information.

I cannot get the Adobe TV videos to play--even the ones in my library--all I get is a black screen--

I cannot get the Adobe TV videos to play--even the ones in my library--all I get is a black screen--I have been ay from Adobe TV for several months--what has changed and how can I view the videos?

In Safari, open your Preferences, go to Advanced and check the "Show Develop menu in the menu bar"
This will add a new menu at the top.
Go to the Develop menu, User Agent and select a different choice which allows Safari to spoof different browsers, OSs and devices.
Selecting Safari for iPad usually works.
However, the choice is page specific. it doesn't stick if you go to another page, you need to repeat the procedure again.

Bookmarked videos keep playing in the background

--when i bookmark a video from you tube or anywhere else--the video keeps playing in the background--there is no tab--this happens with certain flash sites as well--i remedy the problem by restarting the browser or making a non video bookmark right after---

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u '''Use hardware acceleration when available''']. All these settings/options/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme, option or hardware acceleration is causing issues. Disabling/enabling hardware acceleration, and some types of add-ons in normal mode may require a Firefox restart.
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.org/en-US/kb/Options%20window Options]

When I rec videos with iPhone 5 the sound doesn't exist but only a annoying noise..WHY?!

Suddenly now when I rec videos with iPhone 5 the sound doesn't exist but only a annoying noise..WHY?!

Only songs that are physically stored on the iOS device can be deleted with a swipe. Songs that have been listened to, and are in the temporary cache, apparently can not be deleted with a swipe. The easiest way to get rid of these songs is to go to Settings > General > Usage, tap Music (you may need to scroll down in the list), swipe across "all music" then tap the delete button. This will delete ALL music on the device.
Also, iCloud and iTunes Match are not the same service.

Though videos (YouTube) play correctly, the sound is terrible.

Similar Messages

Maybe you are looking for