Thought on idea exchange "duplicates"

I'm not really sure where to post this so...
I think it would be beneficial if when an idea exchange idea is marked as duplicate, kudos that have been given to the duplicate idea should be transfered to non-duplicate (i.e. original idea). Is this done already, and if not could it be implemented? Of course, if a member kudod both, their kudo should not be transfered, as they already kudod the original.
CLA, LabVIEW Versions 2010-2013

Greg,
Just look at the bonus of getting extra kudos for a duplicated idea. 
The idea was revived...  Especially being a good one.

Similar Messages

  • Diuplicate posts on the NI TestStand Idea Exchange

    Hi Laura,
    How do we get duplicates posts removed from the NI TestStand Idea Exchange.
    Regards
    Ray Farmer

    Laura,
    I thought there must have been an Option menu but couldn't initiately find it hence my post. But I have located now and notified of the duplicate.
    regards
    Ray
    Regards
    Ray Farmer

  • Make "idea exchange" read-only til 2015!!!

    why would you just make 'All of the hard work and deep thought that went into most of those ideas, as well as some very  well-thought-out replies', just vanish!!????? now there's no way to crosscheck if an idea has been sent in b4....please put it back up in forum, even if you have to make it read only......please tell me you are going to migrate the old idea exchange and all of its content  into the new 2015 version of idea exchange...please ? it shows such disregard for us if you don't
    ÔƹÔ

    hello? any thoughts on subject  appreciated
    ÔƹÔ

  • Is Eloqua actually doing anything with Ideas Exchange?

    I don't want this post to come across as brash, just wanted to spark some discussion.
    I'm a fairly new Eloqua customer, and part of the onboarding included promotion about the new topliners community and the Salesforce.com driven Ideas Exchange.
    I was looking through the ideas that had more than 100 points, and I couldn't find any where a (identified) representative from Eloqua has openly commented.  Additionally, it does not appear that any suggested idea has ever come to fruition.  Is this a misperception?  It seems like there used to be another solution in place before they went to this new platform - what have some of you long time users experienced?
    I've periodically voted, commented, and posted a couple ideas of my own; I'm trying to figure out my expectations and don't want to judge too hastily.
    Thoughts and experieces with feature requests / suggestions?

    They do, as we have received news about their roadmap and some of the ideas in the Exchange are in it (the one I'm thinking about specifically is better security around assets, including Themes--yea!).  As someone who works in the development/solutions side of the business, it gets complicated so I understand that the top rated ideas may not always make it immediately into the next release.
    But on a side note, it is also my understanding that the higher the promotion points are, the more likely it will also end up in front of the product managers to consider. 
    Of course, as anyone in marketing knows , the object is to drive your "customer" to an action... you have to SELL your idea to get it promoted. 
    I've read many ideas out there that I wonder exactly what the person means or wants because it's so vague.  That does not exactly encourage me to promote an idea. (I do semi-regularly surf through them to see if there are any my users that I support would be able to use or need, etc..)  You can't just assume that everyone knows what you're talking about--or what the value add is of that particular idea.
    And even if ELQ product managers do look through all of the ideas, like any developer, they do also need to see the value add as well.
    Just my two cents...

  • Why is the Real-Time Idea Exchange completely ignored?

    Just looked at the LabVIEW Real-Time Idea Exchange and noticed that only one idea is marked completed, and two more (both posted in 2009, nearly 5 years ago) are "In Development." Those ideas aren't even the top-kudoed ones. NI - why ask for ideas for improvements, and then not implement any of them? (Yes, I have a personal interest here - the second-most kudoed idea in the real-time area is one of mine.)

    First off let me say thanks to you and all of the Idea Exchange contributors. The whole purpose of the Idea Exchange is for you, the users of the NI Platform, to bring your considerable experience to the table as we continue adding features and functionality to the NI Platform. Your passion is one of the primary forces that causes the NI Platform to grow and change in varous ways so that the application challenges of scientists and engineers all over the world can be solved.
    There are many user suggestions across the whole Idea Exchange for us to weigh when considering how to allocate our development resources. We try to judiciously consider which ideas will have the biggest impact on the NI Platform users, and as a result we often have to say "no" or "wait" to some ideas so we can say "yes" to others. You're definitely correct that the statuses need to be updated and I'll be doing so in the near future. Though this may give the impression of being ignored, I want to assure you that the ideas are read and evaluated by the R&D and Product Marketing departments with careful thought and deliberate intent.
    We hope that events such as NIWeek bolster your confidence in the progress of the NI Platform as you see the new hardware and software features being introduced. Though you may not see an immeadiate reward for your dilligence in suggesting ideas, please continue submitting your ideas. The long term effect will be a powerful platform of products designed to meet the community's needs. Thank you for your continued support and engagement.
    Deborah Y.
    LabVIEW Real-Time Product Marketing Manager
    Certified LabVIEW Architect
    National Instruments

  • Updated Process for the Ideas Exchange

    Hey folks! Spotify Community team here.
    If you've been around the Spotify Community for a while, you've probably noticed that we keep tabs on your suggestions for improving Spotify through our Idea Exchange. 
    In an effort to keep the Idea Exchange as organized and up-to-date as possible, we've changed the way Ideas are submitted. We've outlined the new process with a step-by-step guide below. 
    We hope that you continue submitting ideas to make Spotify even better.  While we can't promise that we'll implement every idea that you submit, but we'll always do our best consider each one and provide updates wherever possible. 
    The guidelines:
    Search for previously submitted ideas.  Someone may have already submitted the same idea.
    One idea per post.  No double dipping.  
    Ensure the idea is implementable.  Avoid posting general feedback or questions in the idea exchange--the more specific the idea the better.  
    Use an intuitive title.  
    Submitting a new idea:
    1. Go to the Idea Submissions Board.
    2. Click the New Idea button.
    3. Enter an Idea Subject that includes one of the tags above. 
    4. In the Body enter a detailed description of your idea, including any screenshots or links you'd like to share. 
    5. Select one a platform label.
    6. Then select a subcategory label.
    7. Click Post. 
    8. One of our Idea Guardians in the Rock Star Program will analyze the idea and mark it either as a "Live Idea" or close it for a specified reason (duplicate idea, unspecified, etc). Allow us to introduce our Idea Guardians: Marco, FredJ, gprocess, Peter, dinomight, Anthony, pnc, Jordi, kbrooksc, Carina, OviiiOne, and Rodrigo.
    9. If your idea reaches the Live Idea board it can then start to gain kudos and comments from other users.
    10. Once your idea reaches 100+ kudos a Community Manager or Moderator will update the status to one of the following:
    The Idea statuses: 
    New Suggestion (no status/default one): the idea was just posted, it is waiting to be reviewed by an Idea Guardian.  
    New Idea: this is a new and unique idea, you can add your kudos here. 
    Inactive Idea: Ideas that could not gather at least 25 kudos per year will get closed - you can submit this idea again if you still feel the topic should get some attention. We recommend changing the title or description if posting the same idea again.
    Good Idea, give it some kudos: We like this idea. A decision has not been made but we want to see how much the Community continues to vote on it.
    Under Consideration:  This has been brought up internally. 
    Watch this space: This feature is coming. We have a rough pipeline for its release. 
    Not right now: We talked about this internally and it’s not on our pipeline for the next few months or more.
    Case Closed:  We talked about it, but we won’t be running with it. Thanks anyway!
    Implemented:  This feature has rolled out on the specific platform.
    Needs more info:  We need more clarity or information around this idea from the original poster.
    Curious for more information about the Ideas Board? Check out The Ideas Board: How your feedback reaches Spotify.
    Thanks for your continued feedback and contributions everyone,
    The Spotify Community Team 

    Ah, yes, now I see it. For those of us with less than perfect vision, how about putting the text in red in the center of the page as opposed to in only slightly darker green to the right. I've never used this page before so I had no idea there even was something to select on the right hand side. Also, the first link in the first post on this page gives me this: "You do not have sufficient privileges for this resource or its parent to perform this action.Click your browser's Back button to continue.Return to my original page"

  • Finding similar ideas on the Idea exchange

    Ack, I had an idea and went to the idea exchange forum. Was wondering if this idea was already there, not wanting to pollute the forum. A "broken vi" search returned 55 hits. I cannot justify the time reviewing these before adding an idea. I'd like to be able to quickly submit an idea without the stress!

    Add a few more keywords to the search.
    Alternatively, just post the idea and somebody will very quickly point out if it is a duplicate.
    LabVIEW Champion . Do more with less code and in less time .

  • Better search/indexing capability for the Idea Exchange Forums

    Now  that we are getting more ideas posted to the idea exchange it would be helpful if we could have an improved indexing and search capability. This would help to reduce the number of duplicate ideas posted. I know I have ended up posting a couple of duplicates even after searching.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

    If you ever have a specific example of the search not finding a related idea, please post it here. When I've gotten feedback about this before and then tried to search myself, it seemed like the related idea always came up.  I definitely would like a specific case that I could give to our forum vendor.
    I do agree, the Google like feature with misspelled words would be very helpful and I'll pass along that suggestion.
    Thanks!
    Laura

  • View New Posts in Idea Exchange

    Is it possible to add a feature to View the latest messages posted onto the LabVIEW Idea Exchange.  The ability to sort by last message would suffice.  I like to follow the discussions, but sometimes I see there's a new message, but I have to click through 40 pages to find which topic the reply was posted to.
    Tim Elsey
    LabVIEW 2010, 2012
    Certified LabVIEW Architect

    Yes.  That is pretty much the only way right now to be sure you get all the messages.  Occasionally, I can still miss some.  For instance, if I have an e-mail that I thought I clicked on and read the idea linked in it, but actually haven't.  Or the way the long threads that go onto multiple pages, and I miss the last message that rolls onto a new page and I didn't realize it because the link to go to the next page is at the top of the screen.  (And why don't the messages show you that 5 pages are avaible to that thread.)  You can see a count of total messages.  But it will show you Now 1-10, and a link to go to 11-21.  But there is no link to go to the last page.  You have to go through the pages one by to get the link to the following page.
    The naviagation controls in the individual threads need major improvement.  (i.e. jump links at the bottom as well as the top, and links that go to other places then the page that just follows your current page.)  And the whole board needs a real sorting mechanism that allows you to view the newest messages whether they are the original message or comments.  The "snapshot" links to the right of the screen just really don't do that.

  • Idea Exchange Update

    Hi Forum Users!
    We’ve got some pretty big changes coming to the forums in 2015, and part of those changes will be a community redesign, and revamping some collaboration spaces (such as the Idea Exchange). We have decided to disable the Idea Exchange for the duration of the year in hopes of relaunching it with the changes coming in 2015. We hope that this board will become grounds for cultivating great ideas that we can turn into reality here at Verizon. However, until we have all of the necessary processes and parties in place, we don’t feel that the board is serving its original purpose, or serving you in the best way. Please be patient with us as we improve this community! 
    Thanks so much for the great thoughts you've posted to date!

    In reply to Macca7275
    We moved from Blackberry to iPhone for 120 services in 2010.  We have just renewed the iPhone fleet.  Security was the issue for the business that employs me (lawyers).  When comparing the two, Blackberry performed without issue most of the time but we experienced a number of issues with the trackballs on individual phones. This was, however, the first of the Blackberry Bold models.  The expense behind the scenes was one of the major factors for the move. It was cheaper to run Exchange and iPhones than Blackberry services. Our lawyers on the whole adopted the iPhones and a number have become quite proficient at using them. We ensured that we had a means to securely wipe and lock business phones. We chose Mobile Iron for this purpose but you will find other products to do the same job. Cost is probably going to be the deciding factor here.  Our only negative factor was butterfingers resulting in smashed glass with the iPhones although I have had one user drown several phones.

  • Idea exchange: List only titles

    It would be nice to have a forum layout for the 'idea exchange', especially when reviewing the top ideas. I am not interested in the contents of the questions since I read them all.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

    hello? any thoughts on subject  appreciated
    ÔƹÔ

  • Memory usage of big Array in sub-VI (was: Allow the creation of "Inplace"-VIs of Idea Exchange)

    Hi,
    this thread is based on my post in the LabVIEW idea exchange.
    I put my VIs in the attached .rar file.
    Regards
    Marc
    CLD
    Solved!
    Go to Solution.
    Attachments:
    Inplace_VI.ZIP ‏21 KB

    That would be a good explanation.  There was a thread on something very similar to this recently.  Can't remember exactly the topic but Daniel's answer certainly triggered some memories of a very similar discussion taking place.
    I think it had to do with LV assigning a Array created as a constant as Read-only so in order to make changes to it it needs to be copied to a new memory location, thus leaving the constant unchanged.
    I wonder how it performs in other LV versions.
    Shane.
    PS: Found the thread.  HERE.
    Message Edited by Intaris on 08-20-2009 03:23 AM
    Say hello to my little friend.
    RFC 2323 FHE-Compliant

  • Problem switching from a non Idea Exchange board to an Idea Exchange board when typing a new post

    Tested on Chrome/XP and IE8/XP
    when I start a post in a non Idea Exchange forum and later on want to convert it into an Idea Exchange one, I can switch to the correct forum using the "Select Board" pull-down list. However, when posting, my post is refused because I haven't chosen a "Label". Well, that's because I can't!
    In other words, switching to an Idea Exchange board does not add the "Label" options on the composition webpage, hence it is impossible to post that idea unless you copy it (or rely on the autosave function), start a new post directly into a Idea Exchange forum and paste your old post in it (or alternatively, load the saved draft once you have created the new post).
    Disclaimer: this may have already reported, but as I said elsewhere, the Search function doesn't work either...

    This is my first post so be gentle with me.  I have a Pixi Plus running os 1.4.5.  Last week we upgraded to exchange 2010 (or 14 as I've heard it called).  I lost the connection on my phone.  I tried changing the inheritable permisions above and it has not solved it.  I'm pretty sure all the log in info I'm using is correct.  It acts like it's communicating with the server because it says
    Unable to sign in
    Could not sign into account
    THe mail server responded: bad login/password
    I've changed several things and when I change certain things it says it cannot validate incoming mail server so I feel like I'm close but can't figure it out.  Any help would be appreciated.  Thank you.

  • Picture in a Comment on the LabVIEW Idea Exchange

    How do you post a picture in a Comment on the LabVIEW Idea Exchange?
    Richard
    Solved!
    Go to Solution.

    altenbach wrote:
    Broken Arrow wrote:
    How do you post a picture in a Comment on the LabVIEW Idea Exchange?
    Submit the comment without picture, the edit it.
    Once you edit the comment, you have the full editor, including the "attach" button.
    Now attach the image and submit the edited comment.
    Now edit it again and embed the attachment (you only see it whe editing).
    Do all this quickly so you don't run out of time.
    Laura,
    Since the last forum update, we can no longer attach anything when editing an idea so these instructions are no longer valid. Can we have the old functionality back? Please?
    Thanks!
    LabVIEW Champion . Do more with less code and in less time .

  • New Idea Exchange?

    I think there should be a new board under the Idea Exchanges for new features for the forums. The only one I can think of that I would post there are this and this.
    =====================
    LabVIEW 2012

    You may be interested in reading the thread Idea Exchange for Forums. (Hint: the most important post is the last one. )
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Maybe you are looking for