Thousand of small stripes on the welcome screen and then My Macbook pro 17"

Sunday ( 3 days ago ) after a call with skype my computer freezed.
I forced to reboot but the screen appear with strange short stripes in series of 5 all over the display. This when the Apple ws behind them in the center of the screen. And this is the only sign of life my computer does, After that is just a light blu screen with no arrow.
I installed the last adobe suite 1 mnth ago, and the last OS a couple of month ago, but I do not think these events are related. But just after that my Laptop frezeed a couple of times , I fixed that with a simple reboot.
I´m desperate cause I have all the time machine stuff on an external drive that just crashed the week before that
what should I do?!

Hi To8gal and welcome to Apple Discussions!
Will your MacBook Pro start into [FireWire target disk mode|http://docs.info.apple.com/article.html?path=Mac/10.6/en/8443.html]? If so you can get your vital files off of the MBP before you do anything that might lose the files.
Best of luck.

Similar Messages

  • I loaded LR CC and it open flashes the welcome screen and then NOTHING. Uninstalled and reloaded and same thing happen.

    I loaded LR CC and it open flashes the welcome screen and then NOTHING. Uninstalled and reloaded and same thing happen. ! !

    CC applications close immediately after launch

  • HT1349 I can't get past the welcome screen for my new macbook pro. Help!!

    Seriously. My new macbook pro will not let me progress past the welcome screen. It will not let me select australia (or any other) country as its host country!!!!

    I just had the exact same problem. You must physically push down on the trackpad and get an audible "click" to activate the continue button on the language screen. The one-touch click function is not yet enabled on your Macbook because you haven't set it up yet. This should work for you. It did for me!

  • Everytime I start Itunes, I get the Welcome Screen and everything is reset

    Hi,
    everytime I start ITunes 64 bit on my Windows 7 64 bit PC, I get the Welcome Screen and all is reset.
    Seems to be ITunes can not store the settings after closing.

    I am having the same problem! Everything worked fine last week and now it looks as though iTunes is brand new. I can't sync my iphone without restoring. and I if I reload my library or even a song, nothing saves when closed. It just sits there empty.

  • How to find what carrier my iPhone 4 is with (if stuck at the welcome screen), and can I activate a it with a borrowed SIM card.

    OK. My friend had bought an iPhone 4 online, second hand. He does not have the SIM card. He had recently changed his passcode and FORGOT IT, and we had to restore it. The problem is that, after we restored, it askes for the SIM activation. And none of us have a MICRO SIM Card. So my question is how can I find out what carrier the iPhone is with if it is stuck on the welcome screen and if I can borrow someone elses SIM card to activate the phone so he can use it.
    (we could not contact the person he bought the iPhone from to find out what carrier it is with.)

    Go to the apple store and they will figure out what sim card it is.

  • I upgraded to 9.0.1 and every time I start Firfox I get the welcome screen and checking add on compatability Why?

    I upgraded to 9.0.1 and every time I start Firfox I get the welcome screen and checking add on compatability Why? How can I just start with my homepage and not be welcomed every time I start Firefox?

    See these articles for some suggestions:
    *https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    *https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    *http://kb.mozillazine.org/Preferences_not_saved

  • I updated to io7 and the photos from the welcome screen and the wallpaper are like too much zoomed thank you

    I updated to io7 and the photos from the welcome screen and the wallpaper are like too much zoomed thank you

    View your landscape photo with your phone in the upright position.
    Tap on the photo once so the background goes black
    Take a screenshot now by pressing the round button and the top button together.
    Go back into your photos and find this new screenshot - then apply this as your wallpaper. You should be able to resize it :)

  • I opened elements 10, clicked on settings on the welcome screen, and selected Always launch Photosho

    I opened Elements 10, clicked on Settings on the welcome screen, and selected Always Launch Photoshop Elements Editor only. How can I restore it to Always show the welcome screen?

    Thank you. I had already tried this, and have tried it again, but, no matter how long I wait after clicking the house symbol, nothing hppens.
    Regards
    Michael

  • TS2570 when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

    when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

    Hi , and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Hold alt or option key at bootup, do asny boot choices show up?

  • When i plug my Ipod touch 4th generation in it goes to the apple screen and then it will turn off and then back on to a solid blue screen.

    When i plug my Ipod touch 4th generation in it goes to the apple screen and then shuts off and then turns back on and goes to a solid blue screen.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

    I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
    I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
    I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
    Thanks for any help!
    Gina

    What your describing could be a logic board or memory issue. 
    You did or did not hear 3 startup chimes?  If you hear 3 chimes when you start it, that would indicate a memory problem.  Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
    You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

  • Replace the Glossy Screen with the Matte Screen on a 2008 Macbook Pro?

    Can you replace the Glossy Screen with the Matte Screen on a 2008 Macbook Pro?
    Where would I get a Matte Screen for a reasonable price if I could change it?

    There are a number of issues you should consider before embarking on this project.
    1. If you have a late-2008 unibody MBP, you are undoubtedly aware that there was never any anti-glare option offered for that machine. So there is no anti-glare display that was made to work with it.
    2. If you choose to replace only the LCD panel and not the entire display assembly — which is probably feasible but involves a great deal of painstaking work — you will also need to buy (separately) the aluminum bezel that takes the place of the glossy cover glass panel in models that came equipped with the nonglare screen. The bezel covers and protects the edges of the LCD and the delicate electronic connections there, and hides all that from view.
    3. If you go that route, you will have to make sure that the cabling related to the display you are installing is identical to the cabling related to your original display. This means checking to make sure the cable lengths, connectors and routing both within the display assembly and hinge cover and within the lower case of the computer are all the same.
    4. If you choose to replace the entire display assembly with one that contains a nonglare LCD, you will have the entire, intact glossy display assembly available to sell afterward. If you replace only the LCD panel, the LCD and glass cover panel that you remove will have much less resale value and are likely to be much harder to sell at all, because you won't practically be able to offer any warranty with them and because there are probably far fewer people willing to tackle the fussy, risky display disassembly process than are willing to replace the whole assembly as a unit.
    5. Even if you choose to replace the entire assembly, you will need to verify that the cables dangling from the replacement display assembly are the right lengths and have the right connectors to tie into your lower case properly. Because the assembly will have come from a later MBP model than yours, cable routing and connectors may have changed from one to the other.
    If this all sounds more daunting than you were expecting, you may want to consider just applying a nonglare film to the glass covering your present screen. If you aren't happy with the results, you can fall back on the replacement option.

  • Just downloaded and installed new LR CC.  No apparent problems with the D/I on my iMac, OS 10.10.3. however LR CC will not start.  I get a momentary flash of the opening screen and then the program  shuts down.   From the posts it looks like this if a ver

    Just downloaded and installed new LR CC.  No apparent problems with the D/I on my iMac, OS 10.10.3. however LR CC will not start.  I get a momentary flash of the opening screen and then the program  shuts down.   From the posts it looks like this if a very common problem.  Any help would be appreciated. Thanks.

    Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • My iphone 4 got stuck while software update and now it keeps show the apple screen and then shut off

    Hey everyone!
    My iphone 4 got stuck while I was doing the software update to iOS 6.3.1 without using the computer (directly from the iphone settings) and now it keeps show me the apple screen and then shut off. I really don't know that to do and I would like some help, please!
    thank you very much.

    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • My iphone 5 will freeze up and turn off and back on. It will go to the apple screen and then go black MULTIPLE times before it comes back on. No buttons work while this happens. My phone is a week old.

    My iphone 5 will freeze up and turn off and back on. It will go to the apple screen and then go black MULTIPLE times before it comes back on. No buttons work while this happens. My phone is a week old.

    User troubleshooting is restart, reset, restore from backup, restore as new. If you perform these steps and it still doesn't work, then make an appointment at the Apple Genius bar and have the hardware checked.

Maybe you are looking for