Thousands of IDOC to SAP

Hi.
My BPM must send thousands of IDOCS to SAP.
I've made a test sending 400 vendor IDOC to SAP and spent more than 6 minutes on it.
It's a long time?
In the future, i will have to send more than 20.000 FI IDOCS. What's the fastest way to send them?
Thanks.

Hi Inigo,
Are you using IDoc packaging or sending idocs one by one ?
If you package and send a IDocs then the performance will be better.
Check if this helps..
Re: Mapping JDBC -> IDOC
Anand
Message was edited by: Anand Torgal

Similar Messages

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

Error while pushing idocs from SAP to XI

Dear All,
For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I am able to create the model view distribution successfully but when I am clicking on EDIT --> MODEL VIEW --> DISTRIBUTE (which is one of the steps mentioned in the blog), I am getting an error tht
<b>Target system XIDEV Communication error occurred
User is locked. Please notify the person responsible</b>
please tell me what is the error ie which user is locked and how should i proceed now.
Waiting for your reply.
Warm regards,
N.Jain

hi krishnamoorthy,
i hve created one RFC in my R/3 system which is pointing to Xi-DEV. So, in the RFC I have used my XI user id & password for loging and the RFC is wrking fine when I am testing tht. I have used my id "XISUPER" in that RFC and it is not locked in XI-DEV. I have not used user id "XI_APPLUSER" anywhere.
Please suggest.
Warm Regards,
N.Jain

Help needed in transferring IDoc from SAP CRM to XI

Hi All,
We are facing an issue in sending an IDoc from SAP CRM to XI system. The IDoc is triggered and the status is showing as 03 in SAP CRM system(WE05 is used) but it is not getting replicated in XI System. This is verified by logging into XI System and cross checked the records retrieved by executing the transaction IDX5. No entry is found for this IDoc.
In SM58 transaction, it is giving the status text as EDISDEF:Port SAPRIO segment defn E201CRMXIF_BILLI.
Any pointers on this issues will be very helpful. We are able to send information from XI to CRM.
The project is an upgrade one and the IDocs are developed earlier and were working fine one week back and no changes were made recently.
Thanks,
Udaya

Hi Kapil,
Thanks a lot for your help. We need to delete and recreate Metadata. This is a typical problem that is encountered during upgrade projects.
Thanks,
Udaya

Error when sending INVOICE01 iDoc to SAP R/3 system

Hi,
I was trying to send an INVOICE01 iDoc to SAP R/3 system. I checked the iDoc list (transaction code we02), the iDoc I sent was in the status 51 with the error message as "Program parameters LS <Logic System Name> <Company code> have not been set". Could someone help me how to resolve this error?
Thanks,
Trifire

SLG1 or IDOC in idoc status WEDI

Unable to send an idoc from SAP R/3 to XI

Hi,
We are trying to send Z_CREMAS_SUSMM.CREMAS03 idoc from R/3 system to XI using IDOC adapter.
We have done the following steps.
On SAP R/3 system:
1.created a RFc Destination which points to the XI system using transaction SM59
2.created a port in which we have selected this RFC Destination using tansaction WE21
3.logical system for R/3 with transacion BD54
4.In WE20 transaction,we have configured the PartnerProfile by adding the IDOC message type to the outbound Parameters of XI Logical system.
On XI Sytem:
1.Created RFC destination
2.Created a Port
3.Loaded metadata
While trying to Post IDOc from SAP R/3,it is throwing an error"External segment name E2LFA1M001 cannot be interpreted"
and "Basic type CREMAS03 does not exist" on XI side.
Can anyone please provide a solution to this?

HI Jagruthi,
Have you loaded the metadata into the XI system by using IDX2?
If it is done then try to delete once and do once again.
And also delete the IDoc from IR and reimport the IDoc and activate it once again.
Regards
Goli Sridhar

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

IDoc from SAP R/3 to SAP XI

Hi All,
I am passing an IDoc to SAP XI. I have had to amend a bespoke segment on the IDoc. I have imported the new strucutre into XI. When I send an IDoc to XI the payload is not showing the new fields, even though they are populated correctly.
Any ideas??
Thanks
Martin

Hi Martin,
delete the IDoc meta data in XI transaction IDX2 and try it again.
Regards,
udo

Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?

Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

Is it possible to read Idocs from SAP R/3 System?

Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC

Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.

Problem in Outbound IDOC from SAP R/3

Hi,
I am working on to send an IDOC from SAP R/3 to XI.
I configured all necessary things as follows:
1. Created for XI in sender system -- RFC dest, PORT and a partner profile with an outbound parameters and reciever port as XI port.
2. created for sender system in XI -- RFC dest, PORT(as SAP<SID>) in IDX1 and assigned an idoc type(coming from sender system) to the port.
Now I am trying to push the IDOC from sender system using Test IDOC transaction and gets success message as data is passed to port.
My problem is I am not able to see any message in SM58 of XI server.
Could anyone help me out?
Thanks In Advance.
Yaseen.

Yasseen,
you hardly see the idocs in Xi in sm58. Try sxmb_moni.
If you see anything there try sm58 on the sending R/3. There you see if you have connection problems (eg authorization in XI or missing receiver determinitions).
Hope it hellps,
helge

Problem when pushing IDOC from SAP to XI

Hi,
I am trying to push an IDOC from SAP R/3 system to XI. When I processed the IDOC using test tool(WE19), it's showing message that IDOC sent succesfully to R/3 or External system. But in SM58 Transaction it gave error message that in Trabsaction IDX1: some RFC connection error. Then I opened the Transaction IDX1 on XI server, in that IDOC Adapter configuration I gave RFC destination, Logical system name of R/3 and saved it. Now When I tried again to push IDOC from R/3 to it's not giving any error message(in SM58), but I am not able to see any thing in SXMB_MONI. Can anybody guess what's happening? And also I am using fresh newly installed XI server. DO I need to configure something else? All RFC connections are well defined and working fine.

Hi,
It is not required to create Sender Agreement for the Idoc to XI scenario. Because it is implicitly exists.
Can u check Receiver Determination created in the XI once again. And also check for RFC destinations created in the R/3.
Hope it helps ..
-Moorthy

Not able to import IDOC in SAP XI through SAP....

Hi,
I am able to see the IDOC in SAP box through we60 transaction. But its not visible while importing in Integration Repository (SAP XI).
Do i need to do any prior configuration for this...?
Thanks in Advance
Regards
Venkatesh

Just Check the Following
1. In in SCWV in the IR, Tick imoprt of IDOC and RFC allowed
2. Set in the System Information there of your SAP backend System.
3. Then Click on import and, key in the user details.
4. Check whether the user has authorizations for import ( For RFC S_RFC authorization ) is required.
Doing this an Import should be possible.
Reward points if useful
Regards,
Abhishek

Legacy flat file to IDOC into SAP

after been given the task of converting a flat file structure to SAP idocs my research as lead me into the daunting world of CAPS. Basically I would like to know if using CAPS is the best choice for me
and if so what is actually involved to make this happen?
Thanks
Michael

hi michael,
from my point of view "the right thing to do" would be:
consider if this is the only task for you that is somehow EAI ish...
if it is do not care about technology... just do it with a very simple program
if you have to evolve choose a tool that is capeable of your systems you own: e.g. SAP AS400 .......
in caps you would typically do this:
setup CAPS
write an ftp2queue component
write a converter (custom otd + convertion logic + IDOC OTD)
write a idoc 2 sap component via TRFC
run ;-)
a good starting point would be:
http://developers.sun.com/docs/javacaps/index.jsp
or
http://wikis.sun.com/display/JavaCAPS/Grok+Java+CAPS
or try to convince your boss that sun will implement it for you if you have the money to do so.
we did that when introducing CAPS (we got it for free besides the CAPS licences of course ;-)).
regards chris

Send Idoc to SAP in sequence and roll back if the last one fails

Hi All
I have a scenario like this.
System Ajore --> XI - > R/3
Ajore is a manufacturing system
Send material from Ajore to SAP through XI and create MATMAS idoc in SAP
Send change number from the Ajore to SAP through XI and create ECMMAS idoc in SAP
Send Bill of materials from the Ajore to SAP through XI and create BOMMAT idoc in SAP
All these will should be send in the sequence MATMAS, ECMMAS, BOMMAT to SAP. How can I achieve the sequence operation through XI?
Second challenge is when I send the BOMMAT to SAP and if it fails, then all the processed MATMAS, ECMMAS sent to SAP should be rolled back.
Is it possible to achieve using XI?
The reqmt is very urgent. Any help is really appreciated.
Thanks
Ricky

Hi Satish,
Thanks for the reply. Do I need to do event driven message processsing in XI for this? The other way is to schedule the RBDAPP01 in R/3 to post idocs in sequence based on the message type and Partner number
Does this makes sense?
And any idea bout the second question for roll back?
Thanks

Thousands of IDOC to SAP

Similar Messages

Maybe you are looking for