Thread: LR3 hangs making 1:1 previews

System: Mac Pro, 2.8 GHz Quad-Core Intel Xeon, 24 GB ram, set to 64 bits.
Lightroom (3.4.1) library and catalog on dedicated 2T internal HD.
Adobe Camera Raw cache on dedicated 160 GB internal HD, set to 80 GB.
Also PS5 is installed.
Problem: rendering 1:1 previews, even on a small (100) number of files, results in the spinning beach ball after any where from 30 to 60 are rendered.
There are files in the ACR cache, a number more than were rendered. This happens everytime I try to render 1:1 previews, whether during import or after import.
During import all files are imported and then the rendering gets hung.
Any help would be appreciated. The only thing I can think of is reinstalling LR. I've tried optimizing the catalog, verifying the Hard Disks, and defining the ACR cache on another disk.
Also does anyone know of a debugger that will show where the hang is occuring on the application and system levels?

Not sure I can help, but you should note that the cache is not used for rendering previews. It is only used in the develop mode. The previews are rendered in a preview folder which by default is located next to the catalog. Equally reinstalling LR will usually be a pointless waste of time.
Usually slow rendering is down to hard drive problems, such as lack of space, or generally slow drives, which doesn't seem to be the case for you.

Similar Messages

Thread will hang if no http response from TP

i found out 1 case that Oracle B2B thread will hang if it does not receive HTTP reponse from TP after posting messages to TP.
we use Async MDN.
example 1:
i send ORDERS to TP and expect HTTP response to close the transaction but my TP failed to send HTTP response due to proxy problem. then that particular thread will remain like that forever and no timeout.
example 2:
i receive ORDERS from TP and send the MDN back to my TP, again the thread will hang forever if no HTTP response from TP.
eventually all the thread will hang and no more messages can be process, then i have to restart the B2BService to clean all the hanged thread.

Please get us the b2b.log. And, information like midtier shiphome (version) used also would help.
If you are running it on linux, please recreate the scenario and get a thread dump. Here's the command,
kill -3 <B2BServer process id>
You could reach me at [email protected]
Thanks,
Sinkar

BEA-002900 Initializing self-tuning thread pool HANGS

Hi All,
Trying to start a WLS 10.3.5 instance using jrockit and it is hanging on:
Apr 6, 2013 2:08:39 AM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
end of trace
I took a thread dump and see this:
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=15 idx=0x3c tid=3810 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: weblogic/work/ExecuteThread@0xa0c21480[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at weblogic/work/ExecuteThread.waitForRequest(ExecuteThread.java:162)
^-- Lock released while waiting: weblogic/work/ExecuteThread@0xa0c21480[fat lock]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:183)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"JFR request timer" id=16 idx=0x40 tid=3811 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: java/util/TaskQueue@0xa0c20b28[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at java/util/TimerThread.mainLoop(Timer.java:483)
^-- Lock released while waiting: java/util/TaskQueue@0xa0c20b28[fat lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
===== END OF THREAD DUMP ===============
Done:
1). Cleared TMP and CACHE directories and still does not solve the issue.
Any ideas are appreciated.
thanks

Hi,
we had same hang issue. Unfortunately we run behind VM.
It was an issue with securerandom generation.
We solved the issue as described here http://stackoverflow.com/a/2564406/2098832
Also deleted the <server>/tmp directory before.
Hope this helps.
Casey

GUI Hangs with JAVA sneak preview

Hello all,
I have SAP NetWeaver 2004s Java Trial Version
SP09 successfully installed on my WINXP machine.
Everything is good exept GUI. I cannot be able to use any GUI neither SAP GUI nor JAVA GUI (700). In both cases it hangs without any errors when I try to logon.
J2EE engine is working properly - portal, VC and so on...
May be I have to do something else? Please help me with it.
Regards,
Max

there is sneak preview ABAP engine available whichyou can download and use it forBW and integrated planning.
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken]
Regards
Raja

LR3 Hang On Editing GF1 raw image

I am getting repeatable hangs in Lightroom 3 while editing an image. The hangs are seen in both LR 3.2 and the LR3.3RC running 64 bit on MacOSX 10.6.4.
The hang occurs after manipulating a GF1 raw image. The edits are fairly basic - a small horizontal perspective correction, three clone patches applied and then while brushing filters using the auto-mask option to adjust saturation.
Eventually, LR will hang - CPU bound saturating both cores at 100%. A trace with Shark shows the CPU load is dominated by two anonymous functions in CameraRaw and luaF_recfillpcbase.
At this point, the UI is completely unresponsive and the only way to recover is to force-quit Lightroom and restore the catalogue from backup.
Anyone seen this before? My suspicion is that it is specific to GF1 raw files with perspective correction applied. Any suggestions as to how to work around it - it is currently leaving Lightroom completely unusable for me!
Thanks,
-- Mark

The computer is a new 17" MacBookPro with 4GB ram. This is not the world's fastest computer, but neither is it a slouch and it is well above the minimum requirements to run LR. I do get major performance issues if I have a lot of brush edits (LR uses up all the DRAM and the whole system falls in to paging hell), but in this case there is almost no editing before the program locks up in what appears to be an infinite loop of some kind.
I think that there is something definitely screwy with Panasonic raw files, however. We have quite a few different cameras, and the Panasonic files seem to consisently cause more slow downs than other raw files of comparable resolution - noticeably when applying perspective correction. This is true even when the memory footprint hasn't gone crazy.
As an aside, I am not very happy with LR3. When it works, the results are great. But I seem to have hit far more bugs in LR3 than I ever saw in LR2 (collection sorting, publishing bugs, the assorted crop control irritations).

Multi-threaded program hangs in Linux with green thread when doing I/O

Hi,
I am using green thread(jdk1.3.1) on Linux. My program is in multi-threaded model and has some I/O operations. I am runing one java program using Runtime.exec("java <program>"). Actually the <program> prompts user with some question like "enter location" and waits for the input. Now in my code I am constantly reading the input stream of the process. Once I get the string like "enter location", immediately I send the location through Process o/p stream. But the process is not able to read this and hangs there for ever.
Please help, what could be the problem? If you need the source code, pls let me know.
Thanks in advance,
Sisir

I had a similar issue few weeks back... If I could see the source I would have a better understanding of the problem and think I could help out. If you want to send it, send it to [email protected]
thanks,
JP

Thread Problem - Hanging Program

I have a loop that starts threads for each member of an array.
for(int i = 0; i < myList.length; i++){
myThread t = new myThread(myList);
t.start();
// Here the program just sits here even though everything is done.
Why if the loop has finished and the threads are done does it just hang? Do I have to do something else?

I have a loop that starts threads for each member of
an array.
for(int i = 0; i < myList.length; i++){
myThread t = new myThread(myList);
t.start();
// Here the program just sits here even though
everything is done.
Why if the loop has finished and the threads are done
does it just hang? Do I have to do something else?
What do you have after that comment to show that it is hanging there?
Can you give us the rest of the context that this statement is in?

LR3 Hangs during import

I have an iMac Core Duo 32 bit OSX 10.6.8 all updates current. 2GB RAM. LR3.6 used to run fine on this machine. I didn't use LR3 for some time then on coming back to it I notice that it would hang on importing images from a memory card. Computer and card etc all running well otherwise. LR3 would import several of the images then stop. Indefinite beachball on trying to close LR3 so had to Force Quit. On restarting LR3, it stops at the splash screen and needs Force Quit to get out of it.
However, if I Force Quit the MassStorageCamera app using the Activity Monitor, LR3 runs fine again! No problem, unless I try to re-import. There is no problem importing from the hard disk if I first copy the same images from the SD card. AS LONG AS MASSSTORAGECAMERA is not running! If Mass StorageCamera is running, LR3 will hang even if importing from the hard disk. There are 2 small AVI files on the SD card which were copied to the hard disk so that's not a factor.
So, I surmise that MassStorageCamera was updated during the time I was not using LR3 and now there is some incompatibilty between it, LR3 and my Core Duo system. I'm guessing there's an updates MassStorageCamera app, probably for Lion, that has broken LR3 on my system.
AppleMenu/About This Mac/More Info/Software/Applications/MassStorageCamera shows version 6.1 4/26/12 Universal 64 bit.
Any thoughts?

I have an iMac Core Duo 32 bit OSX 10.6.8 all updates current. 2GB RAM. LR3.6 used to run fine on this machine. I didn't use LR3 for some time then on coming back to it I notice that it would hang on importing images from a memory card. Computer and card etc all running well otherwise. LR3 would import several of the images then stop. Indefinite beachball on trying to close LR3 so had to Force Quit. On restarting LR3, it stops at the splash screen and needs Force Quit to get out of it.
However, if I Force Quit the MassStorageCamera app using the Activity Monitor, LR3 runs fine again! No problem, unless I try to re-import. There is no problem importing from the hard disk if I first copy the same images from the SD card. AS LONG AS MASSSTORAGECAMERA is not running! If Mass StorageCamera is running, LR3 will hang even if importing from the hard disk. There are 2 small AVI files on the SD card which were copied to the hard disk so that's not a factor.
So, I surmise that MassStorageCamera was updated during the time I was not using LR3 and now there is some incompatibilty between it, LR3 and my Core Duo system. I'm guessing there's an updates MassStorageCamera app, probably for Lion, that has broken LR3 on my system.
AppleMenu/About This Mac/More Info/Software/Applications/MassStorageCamera shows version 6.1 4/26/12 Universal 64 bit.
Any thoughts?

Finder hangs on creating alias / Preview too (10.8.2)

Dear Apple-Community,
everytime I create an alias on my TimeCapsule, where I store my files, finder hangs.
Also, when I try to preview a file that is stored on the TimeCapsule, finder just stops working.
All that remains to do is to hold the power button until the system shuts down, as a restart of finder, nor does alt-cmd-esc work in killing finder.
Does anybody have a similar problem or does anybody have a working solution for this?
Thanks so much
Alex.

Have you tried restarting your Time Capsule? Doing this will have the device perform a filesystem check to ensure its formatting is intact, which if not may result in hangs and crashes.
Try opening the Console utility on your system and select the "All Messages" section in this. Then in this view try your actions on the Time Capsule to see what error messages if any show up in the Console. Let us know what they are (approximately if you can't copy and paste them).

Ichat hangs when I video preview

I've tried 2 isignts. They work with ivisit and yahoo but when I try and start a one on one video conference or video preview the app always hangs.
I've tried reinstalling ichat using pacifist. Tossing out all the plist files associated with isight and ichat but the same thing happens.
alan

Hello alan,
It seems you have already tested your iSights using the hints in the How To Ensure Your iSight Is Functional FAQ and have determined that you do not have an iSight problem.
Does iChat hang when you launch it from the
b Finder > Go > Applications
folder iChat iCon, too?
EZ Jim

New Windows 7 machine, Word 2003 & Acrobat 8 - hangs making .pdf

We got new Dell machines with Windows 7 and transfered all our existing software including Office 2003 and Adobe CS3.
I can open and use Word seemingly find. I can open Adobe Acrobat.
When I try to create a pdf file using a word file (and I tried several different files) by these methods;
1. Open Acrobat and go 'create pdf from file'
2. Using the create pdf file icon in Word
and the creating dialog box gets to 10% and just hangs and hangs and hangs. I left it for over 10 minutes and nothing.
This is on both machines (where this function with both pieces of software worked fine).
Also we are having issues setting up new sites and importing our .ste files in Dreamweaver, but I'll post that in the DW forum (just adding it in case it is tied to CS3 on Win 7).
Thanks for any help.

Something to check.
Help > About Adobe Acrobat...
See what dot version is in place.
Support for Office 2007 applications began with Acrobat 8.1; so, you want that or better.
As to Windows 7 — some Adobe information:
--| Installing and using Windows 7 with Adobe Creative Suite applications
http://kb2.adobe.com/cps/508/cpsid_50853.html
--| Adobe product operating system compatibility
http://www.adobe.com/support/OScompatibility.html
--| Adobe Reader/Acrobat – Windows 7 FAQ
http://www.adobe.com/products/acrobat/faq/
From the FAQ page.
--| Adobe supports Windows 7 with Adobe Reader/Acrobat 9; specifically, this starts with the 9.2 dot release.
--| Adobe does not support Acrobat 8, Adobe Reader 8 or prior versions on Windows 7
and does not plan to release updates to those versions for Windows 7 compatibility.
Be well...

My sync process hangs on "Preparing Sync Preview" and never finishes

After a recent desktop software update the sync does not function properly and hangs. I've left it for up to 2 hours and it never finishes. Anyone else have this problem and let me know how to fix it.

Okay, after reading some other online material, suspicion fell on the Blackberry Desktop Software 7.0 version. I uninstalled that version (keeping the data), then downloaded and installed version 6.1, and all is working correctly again.
The attempts to fix the 7.0 sync problems did some strange things to my device, and I fortunately had a backup from a day or two before to restore. When I tried to sync again with 7.0 after restoring, my home screen photo disappeared and a couple of other odd things happened. A hard battery pull and reboot cleared those.
I'm now able to sync with version 6.1 without any problems. However, I'm now unable to back up to the existing file because the software says I can't write to it! One thing at a time, I guess . . .

Blackberry Desktop Manager hangs at "Preparing Sync Preview"

Is it possible to think that RIM wants us all to migrate to Mac or Android systems?, how can they put a new Desktop manager without testing it? I keep reading no one can sync with the new software,
wow, we need urgent solutions
thanks

My phone is now syncing again with Outlook. It involved 3 steps:
1. Replacking Desktop 7 with 6.1
2. Rebooting the device (the apps were disappearing and the Desktop could not identify the phone. I only discovered the solution because the battery went dead).
3. When the calendar would not sync, creating a new .pst file in Outlook and mapping the calendar on the Desktop to it.
Croos my fingers, but it is working again.
Bruce

New Desktop Software Version 7 Hangs at "Preparing sync preview"

PC Version, upgraded on prompt this morning, now get above message, so can't sync.
Uninstalled and tried to find Version 6.0 on site - clicked on prior versions, but only takes to new version.
HELP!
Solved!
Go to Solution.

This solution works perfectly for me too with BB curve 8250. Will not be going anywhere near Desktop 7 until RIM announces a fix. I just wasted half a day of my life trying to recover from V7.

IPhone 4 to ios7 all text typed hangs making it almost impossible to text or email

I updated my iphone4 to iOS 7 and immediately I found that whenever I typed text in emails , notes or emails the text hung. I would like to go back to iOS 6 but this seems not to be possible. Has anyone had a similar problem and how did they fix it. All suggestions appreciated.

I did not have this issue when I upgraded my iPhone 4 from iOS 6.1.3 to iOS 7.0. Perhaps if you were to make a full backup of your iPhone, then restore as factory and recover from your full backup it would help.
I will add a note that on my iPhoen 4, I do not have and facebook integration activated, althgough I think I may have Twitter integration active. I run very few apps on my iPhone 4, I use it mostly as a glorified iPod Touch since I upgraded to an iPhone 5 for my phone features. Still, I have upgraded my iPhone 4 to iOS 7 and it doesn't seem to have any problems with lag or really with battery life. If you are having battery lif issues as well, I would suggest you check for something hung. Perhaps a hung outbound email, or something else tieing up CPU cycles trying to clear something that just keeps getting an error.

Thread: LR3 hangs making 1:1 previews

Similar Messages

Maybe you are looking for