Thread update problem

hi
   i am having problem with my ID, threads from 13th onwards after 4;48 pm are not updating.
thanks

might be it is your browser problem.
Regards,
venkat

Similar Messages

  • View count AND thread update bug?

    It's the end of the year, so that might be the reason of this oddity, but here is my problem:
    I just posted a comment to this thread and returned to my profile page to just realize that somebody had already posted a comment. I went back to the thread and did not find anyhting new, so I went back to my profile...just to discover that a new post had just been added to the thread (and the view count had been incremented).
    Long story made short, at each iteration of this procedure, the view count goes up by 1 and the thread keep appearing as updated, when it is not. I tried that on Chrome and IE8, same thing.
    The interesting thing is that this does not happen for another thread (I just posted in this one too and repeated the above sequence and did not see the thread update bug happen, however, the view count increases each time I go back to the thread).
    To me the thread activity being stuck IS a bug. The view count being incremented each time the original poster displays the thread is debatable. I guess strictly speaking it is the correct behavior and what would be an intersting additional information would be the number of VIEWERS...

    Hmm, I think I understood what is happening: for some reason, I must have failed to read ALL the posts in those threads (very likely in the case of the first one I mentioned, as it is 10 pages long, but I was under the impression I had followed the second one quite closely). I can only see that if I click on the "View All" link at the bottom of the panel showing my recent posts:
    Then the list that shows up indicates the number of NEW posts. This is a misnomer in the sense that generally those posts can be be anterior to the one you posted, so there are not "new" rather just "unread". I may be mistaken, but in the case of the second thread I mentioned, I think that what I may have not checked out AGAIN is the response that was labeled as "answer" by the original poster (but I thought I did though). It is only when I went through all pages (without reading anything, of course) that the thread lost its "highlighted" status.
    Anyhow, here it the suggestions I would have:
    - introduce a new "unread" post column (in addition to the "new" one).
    - offer an option to "mark thread/topic as read" (so that you don't have to go through 20+ pages of a thread to deactivate it)
    Sorry for the misunderstanding.

  • Does anybody have this update problem? index-lion-snowleopard-leopard.merged-1.sucatalog could not be found

    Does anybody have this update problem?
    index-lion-snowleopard-leopard.merged-1.sucatalog could not be found on server swscan.apple.com
    Is there a solution?

    You can send feedback to Apple here >  Apple - Mac OS X - Feedback
    Including the link to this thread may help >  https://discussions.apple.com/message/16092403#16092403
    I'm seeing numerous posts regarding this issue also.

  • Zen 8G This device cannot start code 10 and firmware update problem

    I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
    I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
    If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • Update problem - VBDATA table

    Dear All,
    We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
    Sometime the UPD and UP2 work processes hung without apparent reason.
    In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
    In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
    Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
    As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
    The Production and the Developer systems seem not affected by this problem.
    Have you got any idea about the reason of the problem?
    Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
    Thanks in advance,
    Federico Biavati
    My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

    Hello Siva,
    This is what I did:
    > Check how many entries do you have in VBDATA currently.
    More than 1.000 in every SAP systems that Iu2019m creating from Production
    > You might want to run the reorganize updates program to clear the old updates
    > that are pending/in error
    Good point!!
    After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
    Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
    Thanks for you help,
    Federico

  • Chart x scale update problem

    LabVIEW  8.5.1
    Sweep Chart Problem
    The x scale values do not update until after the 2nd sweep.  The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
    It appears to be a problem with the chart, since it happens with any vi with a sweep chart.  I've used versions 6 through 7 for years and never seen this.  I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
    I've included a simple example.
    Thanks much,
    JSC321
    Attachments:
    Chart Sweep Scale Update Problem.vi ‏32 KB

    You have a typical race condition!
    There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
    All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
    (Execution order is enforced even if the wire value is not even used inside the loop )
    Try it!
    Message Edited by altenbach on 12-23-2008 11:08 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    HistoryRace.png ‏10 KB

  • Updating problem...I have a update that starts out going through but then does not finish just keep running

    also with the update problem it says software update and below the running bar it says connecting to the server

    Please do the following:<br><br>
    #Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop.<br><br>
    #Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
    #Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
    #Finally run the installation file you downloaded to the desktop earlier.<br>
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

  • 10.5.7 update problems

    After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

    jjtopspin wrote:
    Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
    I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
    I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
    I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

  • Cache update problem in Integration Directory

    Hi all,
    We have a cache update problem in our PI development server.
    If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
    We have tried:
    1. Clearing the SLD Data Cache.
    2. Did SXI_CACHE complete refresh.
    3. Did CPA cache refresh.
    4. Did a complete cache refresh of the server.
    5. Restarted the server.
    But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
    Thank you very much.
    regards,
    Jack Nuson

    HI Jack ,
    first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
    Perform a full cache refresh using the URL
    http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
    Regards,
    Saurabh

  • Twitter Update Problem

    Seems I have a Twitter Update problem. 1. I have no pirated software on my computer either from the App Store or anywhere else. 2. I did buy a set off templates for iWork through the App Store with my Bosses Apple ID (it's for work). Is that really the problem. That's ridiculous.  The apple ID is mine, as is much of the software, but it's a computer use for work. If this is true it makes the App Store a lot less useful.

    my apologies I was so annoyed. I didn't bother to state my issue. The issue is: Twitter is constantly asking to be updated. Even after it's updated. Even if it's deleted. I looked at the forums for a solution and found that people were having this problem who installed pirated app store apps.
    I am logged into the app store on my account. All but one of the apps on my machine that come from the app store are on my account. However there is one piece of software on my account that I purchased, by logging out and logging in with her ID, purchasing it, installing and logging out, and again logging in as myself. I don't have an issue with that app. However Twitter, which was installed under my username, constantly says it needs to be updated. Hope that makes it clearer.

  • HT4623 Update problem

    Hello
    How do i solve problem when i'am doing my update from 5.1 to 6.1.2 the massage (3194) occured. Please help me to solve this update problem.
    I'am using iphone 4

    See this support document http://support.apple.com/kb/ts4451

  • TS3694 im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to r

    im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to restore?

    Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.

  • Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update  problem with thyis new phone, someone HELP!!

    Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update  problem with thyis new phone, someone HELP!!

    Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

  • Jelly Bean Update Problems on Xperia S Tablet

    I think we need a new topic for Jelly Bean update problems and fixes.
    Solved!
    Go to Solution.

    small fonts and icons blurry pixelated in notification or google agenda widget
    browser crashes a lot.
    Missing jelly bean home launcher
    Wifi disconnecting for no reason.
    Animations aren't smooth tough tablet is more responsive then android 4.0.3 release6b

  • Updater problem. AGAIN!

    Hi, I am officially annoyed and angry at the iPod Updater 2006-01-10! For the 7th time, my iPod won't update. This is what I have done.
    I installed the latest version of iTunes and connected my ipod. Then a notice came up saying that the software used for communicating with the iPod isn't correct. Please reinstall iTunes. I have done this over and over again and still I get the message! I need help!
    PLEASE PLEASE SOMEONE HELP ME! NO ONE HAS EVER SOLVED THIS PROBLEM FOR ME!

    Just a question but : do you really need to update your iPod ? Did it run very well with the previous version ? I don't really understand why you have your update problem due to the fact that I'm not a PC user… I hope a PC user will help you, but, many of iPod users don't update because they don't need to… They said that theirs run well with old versions, and the iPod ain't broken… I have a 1.3 version (after updating to the 1.4, then 1.4.1 and having a iPod problem… But now it solved)… and I am quite happy with…

Maybe you are looking for