Thread was being aborted

I am getting error like in my asp.net website
System.Threading.ThreadAbortException: Thread was being aborted.
at System.String.wstrcpy(Char* dmem, Char* smem, Int32 charCount)
at System.String.FillStringChecked(String dest, Int32 destPos, String src)
at System.String.Concat(String str0, String str1)
at reporterror.Page_Load(Object sender, EventArgs e)
In that procedure i do perform concatenation of two large strings.
Can anyone help to know why this error comes? Why Thread was being aborted error comes?

Hello,
For ASP.NET projects please consider asking your question here
http://forums.asp.net/
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Similar Messages

Workflow is Canceled instantly - System.Threading.ThreadAbortException: Thread was being aborted.

Hi,
I am trying to solve some issues and strange behaviour with an important workflow hooked up with an InfoPath 2010 list in SharePoint 2010. Everything worked fine until now.
One workflow item has ended prematurely with the workflow history messages "An error has occurred in workflowname" followed by some init text message I added, and finally "Could not start workflowname"
(not sure of the exact translation but something like that). Status is still "On Going" (again not sure of translation).
The workflows after this has gotten the status "Canceled" with no further error messages. However the first init text I added is visible in their workflow history but no other messages are displayed, neither my custom ones nor
the built in.
Please help me out, any hints or pointers to help debug this is very appreciated! I do not have other than "view" access so I will have to tell the IT-department to check logs and perform changes if needed.
/Jesper Wilfing
Edit: The IT guys sent me the error message from the log file:
Workflow Infrastructure 72fq
Unexpected Start Workflow: System.Threading.ThreadAbortException: Thread was being aborted.

Hi,
Thank you for sharing and it will help others who meet the same issue.
Best regards,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

SPUtility.GetPrincipalsInGroup method throws Thread was being aborted error when SPGroup Name is passed

Hello,
I am getting 'Thread was being aborted - Unable to evaluate expression because
the code is optimized or a native frame is on top of the call stack' error
when I use 'SPUtility.GetPrincipalsInGroup' method.
bool bReachedMaxCount = false;
SPPrincipalInfo[] _spPrincInfoColl = SPUtility.GetPrincipalsInGroup(web, groupName, Int32.MaxValue - 1, out bReachedMaxCount);
We have both SharePoint groups (SPGroup) & Active Directory groups in our site.
I am checking if logged in user has access to the group name that I am passing here as 'groupName'.
Code works without any error when I pass 'domain name' as 'groupName' e.g. (Domain\\usergroup) but the same throws error when I pass SharePoint groups (SPGroup) name.
Both type of these groups have at least 'Read' permission on site.
I have this code inside 'try-catch' block and hence I am able to catch that thread aborted error.
What could be the reason for this error? I don't get any call stack and all other properties of exception object are either null or with garbage values.
I am having SP2010 foundation, VS2012 and .Net4.5 installed on my machine.
Kindly suggest on this. Thank you.
Sagar S.

I think the RunWithElevatedPrivilages is not working correctly. I believe that the new site and web objects need to be opened within elevatedprivilages to work. it looks like the way your code is working the SPsite and SPweb objects are getting opened before
the RunWithElevatedPrivilages give this a try and see if your result changes.
bool IsUserInGroup = false;
try
SPSecurity.RunWithElevatedPrivileges(() =>
Guid siteId = SPContext.Current.Site.ID;
Guid webId = SPContext.Current.Web.ID;
using (SPSite newSite = new SPSite(siteId)) {
using (SPWeb newWeb = newSite.OpenWeb(webId)){
bool bReachedMaxCount = false;
SPPrincipalInfo[] _spPrincInfoColl = SPUtility.GetPrincipalsInGroup(newWeb, "TestGroup", Int32.MaxValue - 1, out bReachedMaxCount);
if (_spPrincInfoColl.Where(a => a.LoginName == username).Count() > 0)
IsUserInGroup = true;
}//close web
}//close site
catch (Exception ex)
LogManager.LogMessage(ex.Message.ToString());
Alex

SPLongOperation throws error "Thread was being aborted"

Recently we have migrated our SharePoint application from 2010 to 2013, we have upgraded our solution from VS 2012 to VS 2013 and deployed it successfully in newly installed SharePoint 2013 prior to content DB migrate and all.
In our solution, we had requirement to implement lengthy operation which create site from site template, copying documents from one library to another, creating user groups and so on. To achieve these, we have used
SPLongOperation which is taking care for not to abort thread and complete operation without and time constraint, which is working fine 2010 environment.
After upgrading to 2013, we started facing problem with "Thread was being aborted", which seems SPLongOperation is not working.
Have I missed any configuration?
Help appreciated.
Arpan Shah MSFT Mark as Answer if it solves your problem. Vote As Helpful if the post is helpful for you.

Hi,
According to your description, I suggest you debug your code in the test
environment and check if the method of SPLongOperation.End throw the exception.
The code snippet below for your reference:
//Long Operation Code
using (SPLongOperation longOperation = new SPLongOperation(this.Page))
//Start the long operation
longOperation.Begin();
//Your Long Operation Code Goes Here...
//End the long operation
longOperation.End("http://localhost/_layouts/success.aspx", Microsoft.SharePoint.Utilities.SPRedirectFlags.DoNotEndResponse, HttpContext.Current, "");
More information:
http://snahta.blogspot.com/2009/10/splongoperation-class.html
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

CRVS2010 Beta thread was being aborted

Hi,
I am attempting to upgrade from CR 11.5 to CR 2010 Beta2 (with VS 2010, net 4) to see how the reports and applications do in the new environment. All of the reports have sql parameters and connect to sql server 2008r2 stored procedures. I am experiencing one strange issue.
In the crystal viewer toolbar, if I print the report, after the printer dialog box is opened, the page and report won't work. (it doens't matter if you close the dialog or actually print the report) So, if there are parameter fields or a generate report button, nothing works after the print dialog has been shown. The CrystalDecisions.Web.ErrorEventArgs error says "Thread was being aborted". In order to have access to the web page, the user now needs to refresh the page. Why is this happening? Everything worked fine in both CR 11.5 and CR 2008 Also, if the export button is clicked instead of the print button, everything works fine afterwards, so it's just the print button that is errorring out.
This error happens both on a development computer (XP sp3) and a development server (2008 x86).
Any ideas? Thanks, Harlan

Hi Don,
I created a new asp.net Crystal reports Web site, created a new report and just connected it to a table instead of a stored procedure with no parameters. When I run it from the browser, I still get the same error messages when I try to print so it does not appear to be a migration issue.
Thanks again,
Harlan

SPListItem.Update() = Thread was being aborted.

Hello,
I currently have a problem to update a mysite list item.
This code is working very well on my dev environment but in the production it's not working :/
My logs end with :
Item added
Error: Thread was being aborted.
Nok: Thread was being aborted
Anyone have an idea? (on prod the mysites are in a separate web application. that's the only difference)
Thanks
public static object Add(String User, String Title, String Text)
try
String AuthorLoginName = SPContext.Current.Web.CurrentUser.LoginName;
SuiteBarLog("Sender: " + AuthorLoginName);
SPSecurity.RunWithElevatedPrivileges(delegate()
SuiteBarLog("RunWithElevatedPrivileges");
using (SPWeb Web = new SPSite(new PeopleManager().GetPropertiesFor(User).PersonalUrl).RootWeb)
SuiteBarLog("Open Web: " + Web.Url);
Web.AllowUnsafeUpdates = true;
SPUser Author = Web.EnsureUser(AuthorLoginName);
try
SPList List = Web.Lists[LISTNAME];
SPListItem Item = List.AddItem();
SuiteBarLog("Item added");
Item["Title"] = Title;
Item["Text"] = Text;
Item["Read"] = false;
Item["Author"] = Author.ID + ";#" + Author.Name;
Item.SystemUpdate();
SuiteBarLog("Notification Updated");
List.Update();
SuiteBarLog("List Updated");
catch (Exception ex)
SuiteBarLog("Error: " + ex.Message);
Web.AllowUnsafeUpdates = false;
return "ok";
catch(Exception ex)
SuiteBarLog("Nok : " + ex.Message);
return "Nok : " + ex.Message;

Thanks, but it solves nothing. I have no error to open the website. The error appears once I update my item in the list.
I tried your code but as I thinked it's always the same error.
public static object Add(String User, String Title, String Text)
try
SuiteBarLog("Add Notification to " + User);
String AuthorLoginName = SPContext.Current.Web.CurrentUser.LoginName;
SuiteBarLog("Sender: " + AuthorLoginName);
String PersonalURL = new PeopleManager().GetPropertiesFor(User).PersonalUrl;
SPSecurity.RunWithElevatedPrivileges(delegate()
SuiteBarLog("RunWithElevatedPrivileges");
using (SPSite Site = new SPSite(PersonalURL))
using (SPWeb Web = Site.OpenWeb())
SuiteBarLog("Open Web: " + Web.Url);
Web.AllowUnsafeUpdates = true;
SPUser Author = Web.EnsureUser(AuthorLoginName);
SuiteBarLog("Author confirmed: " + Author.Email);
try
SPList List = Web.Lists[LISTNAME];
SPListItem Item = List.AddItem();
SuiteBarLog("Item added");
Item["Title"] = Title;
Item["Text"] = Text;
Item["Read"] = false;
Item["Author"] = Author.ID + ";#" + Author.Name;
Item.SystemUpdate();
SuiteBarLog("Notification Updated");
List.Update();
SuiteBarLog("List Updated");
catch (Exception ex)
SuiteBarLog("Error: " + ex.Message);
Web.AllowUnsafeUpdates = false;
return "ok";
catch(Exception ex)
SuiteBarLog("Nok : " + ex.Message);
return "Nok : " + ex.Message;

Thread was being aborted Exception while creating large number of Sites in SharePoint 2013

Hi All,
I am getting threading exception while creating a large extent of sites in SharePoint 2013. I am reading data from an excel file and then looping each row. The sites are creating for first two rows then i am getting exception. This code working fine in dev
server but not in UAT server. I tried with changing maxRequestLength in web.config but not working. And also followed the below link.
http://support.microsoft.com/kb/928756
My code as follows-
private void CreateSites(DataRow dr)
try
using (SPSite site = new SPSite(OtherSiteCollection)) // I am creating sites in another site collection
using (SPWeb web = site.OpenWeb())
SPWeb newWeb = null;
SPWebTemplateCollection templates = site.RootWeb.GetAvailableWebTemplates(1033);
SPWebTemplate template = (from SPWebTemplate m in
templates
where m.Title == "SiteTemplate"
select m).FirstOrDefault(); //Here i am using custom template
string siteName = dr["Site Name"].ToString();
newWeb = web.Webs.Add(siteTitle, siteTitle, siteDescription, 1033, template, true, false); //Getting exception here.
newWeb.Update();
newWeb.Dispose();
catch (Exception ex)
lblMsg.Text = "Exception in create sites : " + ex.Message + ";" + ex.StackTrace + ";" + ex.ToString()
I am getting error as-
Exception in create sites: Thread was being aborted.; at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent,
String& bstrWebTemplate, Int32& plWebTemplateId)
at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32& plWebTemplateId)
at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate)
at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate)
at Microsoft.SharePoint.SPWeb.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWeb.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, SPWebTemplate WebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere)
System.Threading.ThreadAbortException: Thread was being aborted.
at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32&
plWebTemplateId)
at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32& plWebTemplateId)
at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate)
at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate)
at Microsoft.SharePoint.SPWeb.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWeb.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId)
at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, SPWebTemplate WebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere)
Thread was being aborted.; at System.Threading.ThreadAbortException: Thread was being aborted.
Can anyone please help. Thanks!
dinesh

If you do this from a Console application, does it succeed?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Thread was being aborted Error.

HI,
I am Getting Below error:
Thread was being aborted. Source of Error :mscorlib Error Method :18 Helplink : Line of Error : at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End()
Thanks is in Advance,
Help me.

try to move Response outside of the Try/Catch block
Check this thread
http://stackoverflow.com/questions/1433448/thread-was-being-aborted

Thread being aborted sharepoint 2013

Hi All,
I am receiving the below error "Thread being aborted" when i try to open my dev url. I have no idea about the area(ThirdSPS2010) which is throwing error. As the production was set up by third party and i just took back up of the url and also the
back up of custom webparts and restored in development environment. I am struck with this error now :(
06/25/2013 14:06:17.45    w3wp.exe (0x22A4)                          0x13DC    ThirdSPS2010
    Error                            00000   Unexpected   Thread was
being aborted.   b6c1289c-d07c-a0de-44ea-088cb42c35e3
Above this i can find multiple Distributed cache warnings as below
SharePoint Foundation            DistributedCache                 ah24w   Unexpected
Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are
present or running in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
Can someone guide what is the reason for these errors :(
Thanks in advance
Ranjani.R

Unlike other service instances, though, the Distributed Cache Service Instance should either be installed *and* online on a SharePoint server, or not installed at all. If the service instance is stopped (disabled) but not uninstalled, details about the associated
Cache Host stay in the Cache Cluster Config store, which can cause problems.
For this reason, the Distributed Cache Service Instance should never be stopped via the Services on Server page in Central Administration or via Stop-SPServiceInstance in PowerShell. A special cmdlet, Remove-SPDistributedCacheServiceInstance, is available
to stop *and* uninstall the local Distributed Cache Service Instance from a SharePoint server. This cmdlet, and its complement Add-SPDistributedCacheServiceInstance, should be used instead of Stop- and Start-SPServiceInstance for managing the local Distributed
Cache Service Instance.
from
http://blogs.msdn.com/b/besidethepoint/archive/2013/03/27/appfabric-caching-and-sharepoint-2.aspx

Error 4 occurred while information structure S001 was being updated.

Hi experts,
I set up the environment for the 2LIS_01_S001 DataSource (InfoCube 0SD_C01) accordingly these steps (as mentioned in another thread):
1) Activating LIS update - goto OMO1 transaction code
In the Updating Info Structures(S001) - double-click the Updating radio button for Info structure S001.
In the Parameters dialog box select Synchronous updating and choose ok.
2) Goto OLI7 Transaction code - run the statistical update.
3) Goto OLIX transaction code - setup version &( will be copied to actual version 000 for reporting
4)Go back to OMO1 do deactive the LIS Update, check radio button to "No Update"
5)Now goto LBW0 and choose option "Deactivate" Delta updating in LIS.
6) In BW, Replicate DataSource, and run info Package with Initilization.
7) Now again in R/3 we need to "Activate" Delta option from transaction code LBW0.
8) and last step is to goto OMO1 to activate LIS Update to Synchronous updating and save.
But in step 2 , I am getting an error i.e
Error 4 updating info structure S001
Message no. M2022
Error 4 occurred while information structure S001 was being updated.
The update was attempted with the following key:
&V3 0100000000000000290658
I am not understanding this error,so cant proceed further.
waiting for ur replies.
Thanks in advance.

Hi Colum
I have two systems in both i am doing the same process.
But in my one system i am getting error
but in my other system i am not getting error and my set up table is filled with records.
According to that note key figures sequence in S001, S001BIW1 & S001BIW2 should be same.
but i my other system, key figure sequence is different and i am fine working with it.
so why it is not able to fill my set up table for my other system ?
thanks in advance.

At Times Locks check Printing in House Bank A/C was being selected

Dear All,
At Times Lock cheque printing in Aminstration->setup->Banking->House Banking A/C ( H.O. Account) was being selected by Default.
I'm deselecting it several times when the issue has come to my desk and then it's printing the cheques.
In this case any other perminent solution is there to make Lock cheque Printing in Administration is not to be selected by default. and I don't know how it's happening.
Please let me know the Reason behind it.
I think u'll understand my issue said above.
Regards,
Mohan Murali

Hi,
You can refer to the Note No. 910588 mentioned in the below thread :
Lock checks printing get ticked somehow
The Note is about the functionality description.
Regards,
Jitin

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not work anymore. Why not, and is there a way to do both with the most current version?

With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.

Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?

Error RCIRAS0546, failure occured while the report was being processed

Hello all,
We use Crystal Reports 2008 V1 server on Linux. With 2 reports now we get the error when viewing the report from the Central Management Console (CMC)
"Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator. [RCIRAS0546]"
In de /var/log/messages, I get messages like these:
Sep 28 17:37:30 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report file 2:11154 (RCIRAS0568)
Sep 28 17:37:40 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report '10. LEN Rapportage per scenario (kapitaallasten, investeringen, algemene gegevens) (V1)' (id=11154) for user 12 (RCIRAS0567)
I tried several parameters on the CrystalReportsProcessingServer, like increasing/decreasing the Maximum Current Jobs and Number of Prestarted Children. None of these make a difference. Als the error occurred when viewing the report as Administrator.
The reports has a dynamic parameter, wtih content coming from the database (drop-down list). When selecting one value the report is viewing fine. With a selection of more values the error occurred. In Crystal Reports 2008 there is no problem.
I restarted the CRProcessingServer with -trace. In the trace I see the following lines:
It seems that several subprocesses start for retrieving data based on the parameter values.
After the crash of the first child, the above mentioned error occurs.
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:82) PageChildDesc constructor (id=3)
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:5489) doCreateChild() created a new child 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6814) cleanupChildren() starting
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||[ProcWorkerManager.cpp : 6854] RAS-CORE-METRICS (before cleanup) number of child processes = 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6979) child id=1 crashed
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6994) cleanupChildren() removing child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:101) PageChildDesc destructor (id=1)
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7028) cleanupChildren() marking as stopped: worker id=1 in child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorker.cpp:2703) stopping worker id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7168) cleanupChildren() ending
Does someone know this problem and what to do about this?
With kind regards,
Pim van Stam
SvSnet

We got this error message on a report that had 5 subreports, 3 of which were based on stored procedures. The report was running fine in our Dev environment and in the CR developer, but not when we published it to another environment. The problem was caused because the stored procedures had been changed in Dev (so that they ran correctly) but these changes had not been released to the other environment. Once the scripts were run to update the stored procedures the report ran successfully. So it apepars that the problem was because the stored procedure/s the subreports were using were failing, but we only got the RCIRAS0546 error message.

Error: Your request could not be completed because a failure occurred while the report was being processed.

Post Author: sagimann
CA Forum: Deployment
Hello,
I'm not sure if this is due to bad deployment, but I suspect it is, at least due to bad environment.
My env is:
Solaris 10 64 bit
Oracle 10g client installed under /opt/oracle/app/oracle/product/10.2.0/client_1
BOXIR2 + FP2.6 installed under /opt/reporting, running under user 'bouser'. by the way, 'tnsping' works via that user.
Important bouser env:
ORACLE_HOME=/opt/oracle/app/oracle/product/10.2.0/client_1
TNS_ADMIN=$ORACLE_HOME/network/admin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/lib32
I reboot the box, then start BO like so:
cd /opt/reporting/bobje
. setup/env.sh
./mysqlstartup.sh
./startservers
./tomcatstartup
Then, I import a BIAR file with some reports, and whenever I try to open any report via infoview, I get a gray error message INSTEAD of the input param form:
Error:
Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator.
This does not occur in our BOXIR2 on Windows, which is why I'm guess it's a deployment/env issue. The main obstacle I have is: how do I diagnose this? there's nothing in the bobje/logging folder, nothing in the /var/adm/message file except for the following line:
May 5 15:23:23 testbox1 boe_pagesd[3865]: [ID 253862 user.error] A failure occurred while the Page Server was processing report 'test report' (id=777) for user Administrator
pls advise,
thank you.

The solution is to turn off the printer preference (bottom of Page Setup screen) in the Crystal Report before uploading to the Server. Thanks to: http://pinchii.com/home/2011/12/error-adding-reports-to-crystal-reports-server/
The explanation, from a comment in the above linked blog post:
"To elaborate more on the error, what basically happens is that the Crystal Reports engine tries to get the status of the u201Creport printeru201D aka u201Cdefault printeru201D which was present on the system when the report was created, but the printer does not exist anymore. This causes the Crystal engine to error out. By setting the report to u201CNo Printeru201D, it tells the Crystal Engine not to look for that report printer when opening the report."
Edited by: abirdman on Feb 3, 2012 9:49 PM

I was being able to watch facebook videos from my ipad, and since i updated my IOS to 7.1.1,i dont know if it has to do with that but now i can no longer see any facebook videos

I was being able to watch facebook videos from my ipad, and since i updated my IOS to 7.1.1,i dont know if it has to do with that but now i can no longer see any facebook videos

If you look at the preferences for Flashblock (access from the extensions window of the add-ons manager) and choose Whitelist, you can add a site to that window, and that site will not be blocked by Flashblock at all. You will not even see the Flashblock icon.

Thread was being aborted

Similar Messages

Maybe you are looking for