Three Cameras, several clips, how to bring them all together

Good day everyone. I shot my first wedding ceremony using one Canon 5d and two 7d cameras. So I have several clips from each camera during the one ceremony. I have done in the past a FCP Multiclip between three cameras, one clip each which was straight forward. Now with multiple clips from each camera for one ceremony, I am unsure how to combine them all and make one continous clip to then create one multiclip? What I was thinking of doing was just getting the one clip from each camera that is the same scene from each and then creating a multiclip from that, but the results of this would then be several multiclips. Is there an easier way to this? Maybe creating one large clip of the several clips per camera and then create a multiclip? Any info on what others are doing would greatly be appreciated. Thanks again

Here is what I did:
1. I created a new sequence and dropped all my clips into three different tracks. Each track representing one camera
2. Wherever I saw a break on a clip, I made sure to blade the other two tracks to match that break.
3. I selected all clips including audio and dropped them into a new BIN.
4. As all where still selected in the bin, I control click and selected Multiclip and NOT multiclip Sequence using In points
5. I then played the multiclip that was created and it is out of sequence. So some clips begin to play at a later time then when it actually happened.
I believe this is happening since the multiclip is being created by file name and each camera has a different file name, so it is going by that order. Do I need to label each clip using the Angel tab to make this work, or is there another way? Any suggestions appreciated. Thanks

Similar Messages

  • After several years of taking photos(thousands) I seem to have many duplicate photos in iPhoto. How do find them all without going through 10,000 photos? they are mostly scanned photos that I have reused over the years

    after several years of taking photos(thousands) I seem to have many duplicate photos in iPhoto. How do find them all without going through 10,000 photos? they are mostly scanned photos that I have reused over the years not ones that I have recently uploaded from my camera.
    Thanks whoever can help

    Where are you seeing these duplicates?  In the iPhoto window or in the Finder? 
    OT

  • When I copy a CD onto my macbook pro I sometimes get several songs that are "out" of the album.  How do I get them all together in one album?  Any help will be much appreciated!

    When I copy a CD onto my macbook pro I sometimes get several songs that are "out" of the album.  How do I get them all together in one album?  Any help will be much appreciated as I cannot seem to find the solution to this problem in the troubleshooting section of iTunes.

    Generally all you need do is give tracks from the same album a common Album Artist. See Grouping tracks into albums. The images need an update but the basic info. still holds.
    tt2

  • Perspective grid: some grids invisible - how to bring them back?

    I was drawing an image using 2-vanishing-point perspective grid when, at some point, for a reason unknown to me, 2 out of 3 grids dissapeared.
    Currently I have the left (blue) grid, but they right (orange) and bottom (green) grids are not there.
    My question is, how to bring them back, without resetting the whole grid?
    Thank you

    Monika Gause wrote:
    Or did you hide the grids by Alt-clicking the widget that moves the perspective planes?
    The latter is the case!
    I was copying objects perpendicularly, by Shift+Alt+Dragging the widget. I might have accidently Alt+clicked the widget in the process.
    Later on, in an attempt to solve the problem I thought I did everything I could with the widgets, but apparently I missed that.
    Thank you!

  • I lost my marginal lines in cs6 how to bring them back?

    I am trying to create 3 fild brochure in adobe sc6 but i dont see marginal lines in the main screen. Plz help me how to bring them back.
    Thanks

    you can go to the view menu and make sure the rulers are visible, then you can click and drag from a ruler to create guide lines and place them where you desire.

  • Suddenly the apps I downloaded won't work. The screen "blinks" for a second as if the app is loading, and then returns to the home screen. All the apps that came with the iPod seem to be working fine. How to get them all working again?

    Suddenly the apps I downloaded won't work. The screen "blinks" for a second as if the app is loading, and then returns to the home screen. All the apps that came with the iPod seem to be working fine. How to get them all working again?

    First try a hard reset.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    If still no luck, try downloading another free app from the App Store.
    More troubleshooting here.
    http://support.apple.com/kb/ts1702
    Lastly, try to restore the iPod from a previous backup or restoring it to factory settings.
    B-rock

  • HT1399 my itunes library is stored as .aac files how can i convert them all together to mp3

    my itunes library is stored as .aac files how can i convert them all together to mp3

    Thanks for the quick response. I didn't think of that. I just tried several songs, and it DOES work as you say. Except iTunes downloaded the identical 128 kbps protected files again. These are 90's - "10,000 Maniacs" tracks.
    So does this mean Apple doesn't have my "10,000 Maniacs" high bit rate unprotected files available? Then why would anyone even buy any songs through the "iTunes" store, when Amazon sells only 256 kbps MPEG music files, at a little cheaper price than Apple?
    I'm missing something. The tracks I want to upgrade are available at Amazon in the higher bit rate format. Maybe iTunes is annoyed at me for using "Windows" on a PC and an "Android" phone?
    Thanks again.

  • Okay so i recorded a song but each part comes out as like take 1, i have 10 takes. how can i put them all together as one take, to make one song all in one take not small pieces of a song.

    okay so i recorded a song but each part comes out as like take 1, i have 10 takes. how can i put them all together as one take, to make one song all in one take not small pieces of a song. like i hit record and sang the entire song but when i hit play it was in pieces not just one song like it was in ten takes. is there any way i can blend it all into one take, to make one clear song?

    You're not very clear in stating your problem. Maybe it's terminology: "takes" in recording lingo (and in GB lingo) are different version of exactly the same part in a song, so you only want one of them in the end. Please tell us exactly what you did and what it is that you don't like.

  • How do I change the keypad From a split key view to having them all together?

    How do I change the keypad From a split key view to having them all together?

    Next to the ,?123 key on the lower right hand of you keyboard is the button that allows that feature. You need to hold that section down and the option will appear.

  • I can find duplicates in my itunes library but can't figure out how to delete them all at once

    I can select all my duplicates in my itunes library but then can't figure out how to delete them all en masse?

    Hi, Abril_Perez17.
    This may be related to a new feature embedded in iOS7 that shows all purchased music by default.  Go to Settings > Music, then turn off Show All Music.  See if the issue ceases once the feature has been disabled.  This information is located on page 63 of the user guide below. 
    iPhone User Guide
    Regards,
    Jason H. 

  • I reset my macbook pro a few days ago.. and when i started to use it again i noticed all my apps were gone (keynote, iMovie, garage band, etc) i don't know how to get them all back and every time i try it tells me i must buy them.. what do i do?

    I reset my macbook pro a few days ago.. and when i started to use it again i noticed all my apps were gone (keynote, iMovie, garage band, etc) i don't know how to get them all back and every time i try it tells me i must buy them.. what do i do?
    should i come into the actual apple store or can you help online ?

    Hi vickkjayy11 and welcome to Apple Support Communities,
    Just to be clear, we are a peer to peer support community and have nothing official to do with Apple.
    So to your problem, when you say:
    "I reset my macbook pro a few days ago"
    What exactly happened? Did you have a Time Machine backup?
    Read this:
    OS X: About OS X Recovery - Apple Support
    It would help to know the exact model (size and year) and which OS you're using.

  • TS4002 I have 1600 emails in my icloud box...does anyone know how to delete them all at once without having to do one at a time????

    I have 1600 emails in my icloud box....does anyone know how to delete them all at one time without having to do each one individually?

    Hey Koyster,
    Great question. Utilizing iCloud.com, we may be able to purge these emails in a much faster way:
    iCloud: Delete email
    http://support.apple.com/kb/PH2651
    Delete messages
    - On your Mac, Shift-click to select multiple adjacent messages or Command-click to select multiple nonadjacent messages.
    - On your Windows computer, Shift-click to select multiple adjacent messages or Control-click to select multiple nonadjacent messages.
    Thanks,
    Matt M.

  • I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

    I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.

    Hi
    frodojon wrote:
    I either didn't do the correct mapping sequence before or I'm starting to wonder if it has something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel.
    All this sounds like you are confused about the general nature of MIDI Continuous Controllers (MIDI CC). The MIDI specification allows for 128 different CC's: CC0 to CC127. Some are typically "preallocated" to 'standard functions: CC1= Modulation, CC7=Volume, CC10+Pan, CC11= 'Expression'. Some act as switches such as 'Sustain' CC64.
    frodojon wrote:
    Everything appears to be scaled from -63 to +64 if that's what you mean by scaling?  What do you mean by MIDI CC7?
    Mainstage works with MIDI CC's generally in a number of ways:
    Some standard ones are automatically passed through to all MIDI/Instrument channels unless you specifically block them. Others are not passed through unless you specifically map them to something.
    This mapping can be done basically two ways (with MS 2.2):
    a) Make a Screen Control in Layout mode, and assign it to a particular incoming MIDI CC message. Then, you can map this Screeen Control to a variety of parameters such as the volume of a particular channel strip.
    b) With MS 2.2, you can do the above Assign and Mapping directly, without the need for Screen Controls as an 'intermediary'.
    frodojon wrote:
    something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel.  I
    Yes.
    It sounds to me like you have an issue where you have several hardware controls on your Keyboard set up to transmit the same MIDI CC. This is probably not a good idea, and it would be much better if you assigned them to transmit different CC messages (CC1 for Modulation and probably CC11 for the Expression (though you may want to set the pedal to some other number instead.
    Once you are transmitting different CC messages, you will be able to Assign and Map much more flexibly:
    for example, you could one to control the overall output volume at Concert Level in MS, whilst the other controls the volume of a specific channel within a Patch.
    Your issue of layered patches is one of "Scaling": one Screen Control (assigned to an incoming MIDI CC message) needs to alter the ranges of different channel strips to different amounts. You can set this up by using multiple mappings for one Control, each set to work over a particular range (for example a goes from -20 to 0 whilst b goes from -30 to -20 etc.).
    hth
    CCT

  • I have multiple chat clients and want to link them all together.

    I have iMessage, Yahoo!, Gtalk, Facebook, and Skype. I want a good client to link them all together. I also want the abiity to add other IM services to the client at a later time if I need to.

    Then there is nothing more anyone here can do for you if you searched all the places I mentioned in my previous post. 

  • HT5129 I had photos from MobileMe organized into different events.  When iPhoto made a MobileMe event, it took all of those photos out of the other events and put them all together in the new "from MobileMe" event.  Is there any way to reverse this?

    I had photos from MobileMe organized into different events.  When iPhoto made a MobileMe event (when MobileMe ended), it took all of those photos out of the other events and put them all together in the new "from MobileMe" event.  Is there any way to reverse this?

    Only to load your backup from before downloading the MM photos
    LN

Maybe you are looking for