Three finger and four finger multitouch stopped working

For some reason it just stopped working, I'm not sure what's going on. Rebooting isn't helping. Suggestions?

Try resetting the SMC:
http://support.apple.com/kb/HT3964
And the PRAM:
http://support.apple.com/kb/HT1379
Good luck!

Similar Messages

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

MDB and Database - Listener port stops working

Hi,
I have created an MDB which does the following when a message is received from the queue.
1. Store message in database
2. do some processing
At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?

usmanchaudhry wrote:
Hi,
I have created an MDB which does the following when a message is received from the queue.
1. Store message in database
2. do some processing
At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?i believe you need an XA driver and a transaction manager, for starters.
a simple JDBC rollback won't do it.
which app server are you using?
which jms provider?
%

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

My ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

Most likely, water damage.
You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.)

I just upgraded my iPhone 3GS to 4.3.5 and my universal doc stopped working with it? It has worked flawlessly for the last year and suddenly I get the message: "this iphone is not optimized for this device." The music comes out too quiet to the speakers

I just upgraded my iPhone 3GS to 4.3.5 and my universal doc stopped working with it? It has worked flawlessly for the last year and suddenly I get the message: "this iphone is not optimized for this device." I dismiss the message, but the remote no longer works with it and the music is too quite to the speakers. The remote works fine with my Macbook Pro. I tried a restore on the iPhone and started from scrach, but the same problem exists.
Any help with this?
Thanks,
JT

yep... my iphone 4 also having problem like astoker.. u see on dock pin using torch light.. i found 2 pin touch each other.. i solve my problem ready.. thanks wjosten.

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
It might be a huge coincidence but the drive was working fine before i installed lion?

Installing Lion would not cause the superdrive to stop working. Are you unsure as to whether or no a cd/dvd is inside? Something may be broken inside and you should consider bringing it in for service.

Bluetooth and Built-in keyboards stop working randomly

While I've read several threads about the built-in keyboard on MBPs stop working I've never seen one quite like this. We're on a late 2012 17" MBP, Core i7 with 4GB memory. Randomly both the built-in keyboard on the machine AND the Bluetooth keyboard stop working - but not fully. On both the arrow keys and backspace key still work but nothing else (CMD, space bar, etc).
What's really odd is a USB keyboard works perfectly when this happens. We plugged one in and blamo, it worked just great - but the built-in and the bluetooth ones continued to not work (just as described above).
The user commented that this has been the case on her last 2 machines and both were built from scratch. That leads me to think it's software rather than hardware - I went through everything that was running, shutting down everything I could - with no good results. If you log out/back in (or reboot) that fixes the problem as well (further leading me to software)
Thoughts anyone??
Thanks!
-Ross

Hello RosslnCO2,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Best of luck,
Mario

My-space-bar-and-delte-button-have-stopped-working

My-keyborad-spacebar-and-delete-button-have-stopped-working.Any-suggestions

I don't suppose you have an external keyboard. If you do, test it. If not, try booting in safe mode (shift key down at startup.)

Why has drag and drop in mail stopped working

Drag and drop has only stopped working in Mail, it is still functioning in other programs.

Yes sir, but as you said, "Pity no one came up with a suggestion or two or a solution".
The matter isn't closed for others coming to this thread looking for an answer. Repairing permisions is much easier than a reinstall. It worked for me.

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Just downloaded itunes version 10 .2.2 and my iphone has stopped working. now showing fault on itunes asked to reinstall. Why has this happened?

just downloaded itunes version 10.2.2 + Qucktime and my ipohone has stopped working!
I am told there is a fault in my itunes software and I must reinstall.
Why has this happened, is there a fault with this new version?

Whilst I don't have an answer, I hope a knowledge specialist does.I've seen numerous posts like this.After 10.2 update I lost library and haven't been able to actually connect my iphone to itunes for the upgrade. Each time I connect the iphone my system crashes. There was NOTHING wrong with my itunes or system until the point of update. There doesn't seem to be support, despite the extent of this problem. My iphone seems to need an update as its overheating and battery life is a nanosecond. BEYOND FRUSTRATED! All input welcome.

On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?

On both my desktop and notebook, sync just stops working and needs to be set up again! Although my account is still there ?
I have windows 7 on both computers and I use the paid version of Roboform (which does not encounter any problems!) So, I really need my sync to work and keep working. Please help......

Do you mean that after closing the browser your Sync set up is gone and you need to Set it up again?
This is, generally, because your privacy settings are too restrictive and you are deleting the password of your Sync account.
You can modify this in the Privacy tab of your Preferences/Options window. Select Remember History or Use Custom Settings in the drop down to configure the level that you want.

I am using Elements 13 and photoshop editor has stopped working can you help

I am using Elements 13 and photoshop editor has stopped working can you help

hi Andaleeb sorry to hijack Stephanie's thread!
I don't get any crash reports, it starts to open then just stops, nothing happens. ive tried getting in through the organiser but that doesn't work either.
I think my laptop is Windows 8 (its a fairly new laptop, does that sound about right?)
it was working Saturday I'm quite new to using it so no real workflow, just playing around with effects. ive only had it about a month
Thanks
Natalie

Three finger and four finger multitouch stopped working

Similar Messages

Maybe you are looking for