Three finger gestures not working on Mountain Lion

Since upgrade to Mountain Lion, gestures have become unreliable. Gestures for Mission Control, switching between full screen app, etc. (which are set with three fingre swipes) work sometimes but won't work most of the time. Anyone else facing the same problem?

I had this problem but I found it was the settings that changed when mountain lion was installed.
Mountain lion changed my three finger gestures to four finger gestures when swiping between full screen apps.
I found there were extra settings. Apparently when installing mountain lion my three finger gestures were changed to four finger gestures.

Similar Messages

  • Multi touch gestures not working in mountain lion?

    Any one else having problems with their multi gesture trackpad not working when you wake your notebook from sleeping with Mountain Lion? If I restart it fixes it but once it falls asleep it stops working again.

    I've been having the same problem.  When my MBP would wake from sleep any touch gestures that used more than two fingers would not work.  I also had the issue where the MBP would forget the wireless network when it woke from sleep.  I found this answer on another thread and it worked on both issues for me.
    Instructions:
    Reset PRAM: http://osxdaily.com/2010/11/15/reset-pram-mac/
    Reset SMC:  http://osxdaily.com/2010/03/24/when-and-how-to-reset-your-mac’s-system-managemen t-controller-smc/

  • Facebook(wall post) location button not working in mountain lion macbook pro 13inch in upper right button

    facebook(wall post) location button not working in mountain lion macbook pro 13inch in upper right button

    No third party applications installed; no gestures changed. It just starts acting up like I described a few times a day. I'll be browsing the internet and go to switch desktops and it suddenly doesn't work.

  • Dashcode is not working in Mountain Lion. I tried updating to Xcode 4.4 and it still did not work . . .

    Dashcode is not working in Mountain Lion. I tried updating to Xcode 4.4 and it still did not work . . .
    I use dashcode for most of my coding needs, so it is very important to me!

    I have the same problem too. dashcode shows up in the finder but its just a question mark (see screenshot). Anyone found a way to address this?
    Thanks!

  • Magic mouse not working in mountain lion

    magic mouse not working in mountain lion....What can I do?

    Have you tried a fresh set of Alkaline Batteries?
    Was  it ever paired to another divice?

  • Remote desktop not working on mountain lion

    My ARD does not work on Mountain Lion. The software opens but all I get is the menu at the top, and my only working option is to quit. I spoke to Apple support and they suggest (as they usually do) to reinstall the whole operating system, but I can't accept this as a valid answer as everything else works. There must be a way to fix this without having to reinstall a machine that came originally with Mountain Lion!

    I was able to fix my issue by just uninstalling ARD (I used AppZapper) - and just reinstalling it - no "Archive & Install" required - best of luck with your situation!

  • Applet cache is not working on Mountain Lion(Mac 10.8)

    Applet cache is not working on Mountain Lion(Mac 10.8)
    OS Details:  Mac 10.8
    Applet cache is not working on Safari 6 and Firefox 15.0.1 with java 7(provided by oracle) on Mac 10.8(mountain Lion) and even applets are not working  on chrome because its not supporting java 7(64 bit).
    In order to run applets on Firefox and Safari we need to install Java SE6 which provided by Apple otherwise “PlugInProcess” does not work and it show the below warning message.
    For your information I given screen shots below
    ) Safari screen shot with Java Plug-in
         2.) Firefox screen shot with Java Plug-in
         3) Chrome screen shot( it does not have java plugin)
    4) Java cache viewer console
    5) Applet Java console and it is using Java 7
    Kindly review above mentioned problem and suggest us.

    Problem solved.
    I switched to a Western Digital powered Hard Drive from the Toshiba Canvio I was using.
    I suspect the USB 3.0 did not mount correctly after the first save.
    Fortnuately the Canvio does work on my Windows 7 machine.
    Thanks for yur suggestions

  • CS4 "Save as Adobe PDF" not working in Mountain Lion

    CS4 Save as Adobe PDF not working in Mountain Lion
    Just bought a new Mac with mountain lion, installed CS4 design premium twice trying to fix this. When you go to "print" then "Save as Adobe PDF" the process fails with a pop-up saying "An error occurred while saving the PDF file". I can still do the standard "Save as PDF" - but that usually results in a file size 10x larger than Save as Adobe PDF so it won't work for me; I need the small file sizes of Save as Adobe PDF.
    When I go to Help > Repair Acrobat Installation it seems to be recognizing a repair needed with Adobe PDF Printer (see screenshot below); but when I go through the repair nothing changes it still won't work.
    Any help is much appreciated!

    "Save As Adobe PDF" works fine in Snow Leopard.
    Thanks for the link, but this is no help - I already have "Save As Adobe PDF" on the menu - the problem is when I click that it errors out...
    I just think its sad that Adobe charges people $2000 and provides zero support for future updates; when I buy an iMac for half that amount of money or an iPhone I get operating system support and bug fix downloads to deal with the latest internet advances for years to come - but Adobe apparently takes your money and says sayonara! Is it really that hard to provide updates on $2000 worth of software for say 24 months??

  • My scanner (Epson V300) does not work since mountain Lion upgrade.

    My scanner (Epson V300) does not work since Mountain Lion upgrade. I updated the drivers,I can get it to work one time when I reboot the iMAC it will function (scan) one time and than not again until I reboot. Help!!!

    Try trick #5, at > Eight amazing Image Capture tricks | Macworld

  • HT1338 preview does not work with mountain lion

    I updated my mid 2011 mac mini to mountian lion and i find Preview and all of MS Office 2011 for MAC fails to work
    I can cut and paset the logs, but lets astart with assessing whagt does not work with Mountain Lion.

    Your profile lists a 2008 MacBook with Snow Leopard.
    I installed Windows XP into Bootcamp on my 2009 MacBook Pro (either in Leopard or Snow Leopard, I do not remember which) and I used it with Parallels 6.
    When I upgraded it to Lion, even though the Lion Bootcamp will NOT install Windows XP, my Bootcamp (and use by Parallels 7) survived the upgrade.
    It may be possible that it will also survive and operate a future upgrade to Mountain Lion. 

  • Appleworks does not work with mountain Lion.  What can I use for drawing and painting?

    Appleworks does not work with mountain Lion.  What can I use for drawing and painting?
    MacBook
    Marian

    Please see this article which examines various possible alternatives to AppleWorks:
    http://rfwilmut.net/aw

  • Multi finger gesture not working

    Hi,
    My laptop is hp 15-r014TX.
    Recently my touchpad multi finger gesture has stopped working. I can not scroll using 2-finger scroll, right click, rotation, zoom in and out. However, one-finger gestures are all working fine like I can swap between apps by left swipe, options appear by right swipe. I tried changing the settings, but of no use.
    Thanks,
    Pragya

    Hello @Pragya_Mathur ,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 15-r014tx Notebook and the finger gestures not working correctly. Here is a document on how to troubleshoot the finger gestures on a Touchpad.
    If you will go to the section on common TouchPad gestures, TouchPad and ClickPad configuration options are located on the TouchPad properties page. It shows you the Clickpad properties page. You can select the options.  This only works on programs that have this capability, such as a photo browser or word processor.
    Hope this fixes your issue with finger gestures.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation

    The Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation.
    Opening the dictation system preference panel makes the system preferences crash...
    The mic of that camera is the only mic I have.
    I own a Mac Pro and an old Cinema Display which has no built-in cam/mic.
    Anyone having the same issue?
    I hope this is gonna be fixed with 10.8.1.

    Hello, thank you for responding.
    Unplug and plug in back the camera does not solve this problem. I tried that before.
    But what worked was to start photo booth. Don't really know why.
    So after every restart of the mac I have to start photo booth and dictation with the QuickCam is working. ^^

  • Why does snaps pro not work with mountain lion?

    I spent a lot money purchasing the pro addition only to be told that it won't work with mountain lion due to Apple's written something into the code that does not permit me to make videos with it. I even tried ot make a video of Indesign acting up so i could send it to Adobe support and it wouldn't allow me to. Is this the resaon it suddenly doesn't work anymore? Are there plans to fix mountian lion to allow me to use my software? Alternatively,, does Apple have something that does screen captures of videos?

    this is the repsonse form Ambrosia: (Not sure I understand it)
    As far as Snapz Pro X 2 functionality, some major backend Digital Rights Management changes enacted by Apple may be what is preventing you from recording movies you were previously able to record using our software. Basically, our program can no longer access videos before the DRM protections are enabled, unfortunately we have no control over these changes. Please see the following FAQ:http://www.ambrosiasw.com/support/faqs/products/snapz-pro-x /Why-does-the-content-of-my-capture-display-as-a-checkerboard
    BTW I am current on the latgest version.
    Does anybody know how to work around my problem? I need to be able to record videos on my computer.

  • Logic Express not working on mountain lion!

    i am having problems with logic express 9.0.0 which is not running on mountain lion 10.8.2.
    i have made an attept to try and get newer updates but before it gets anywhere this pops up
         " An eligible Logic Express Version was not found in
         the Applications Folder. This Update requires Logic
         Express version 9.0 or higher. "
    (i do not have the logic disks at hand)
              The message that pops up when i attempt to open logic
                   " you cant use this version of the
                    application "logic express" with this
                   version of OS X.
              you have "logic express" 9.0.0 "
    please help!!

    Hi
    First, you are going to need v9.1.7 or later with Mountain Lion (http://support.apple.com/kb/HT5421)
    Second
    To get the updaters to work several things MUST be correct:
    The Logic Application must be named "Logic Pro" or "Logic Express" (depending on which type you are working with) with NO Additional spaces or numbers in the name.
    The application must be at the root level of the Applications folder (and NOT anywhere else).
    CCT

Maybe you are looking for