Three finger swiping for forward and backwards
I just recently installed Lion (Yay) and I noticed that they have taken out something that I really used a lot in Snow Leopard; the three finger swiping, that could navigate back and forward through pages on the web and replaced the need of using the arrow keys to navigate up and down in apps such as Mail. I loved this feature because it simply made it easier and enjoyable to navigate. I know that it has been replaced with a two finger swipe, but to my knowlege, this is only used it Safari not Chrome or anyother application. Now my question is "Is there a way to get it back?" I'm just looking for something that will at least get the two finger swipe to navigate more than the Safari Application.
Cheers,
Callum
So i was in the same boat, and I literally just figured it out like 5 mins ago.
Go into system preferences>Trackpad, click on the tab for More Gestures
Its the very first option you come to on that page, Its 'Swipe between Pages', I was used to 3 fingers left or right.
Ahh back to normal...On to other problems with Lion. Good Luck and I hope this helped.
Similar Messages
-
Three finger swipe to forward and back
Hello Guys, I loved using three finger swipe to forward and back on Finder and my browser, it was very convenient and fast. BUT now that I installed Lion the feature disappear, I already tried to configure it using the preferences, but no luck.
is there any way to configure it? or remove Lion and get my money back?Since it's a new machine, contact Apple's Express Lane and let them deal wtih it.
-
How to change the style of icons used on the tool bars mainly the forward and backwards arrows
Hi .
There always used to be a way of changing the look of firefox the arrowws ect at the moment i have just outline type arrows for forwards and backwards i would far rather have the older Green arrows far easier to see and look far better how do i cange this now
This is on Firefox 9.0.1 64 bit on Arch Linux currentOk well this has only recently happened that the arrows have gone to these horrible outline things i use themes and personas but this is a new effect so looks like ity is down to canning either themes or personas because those arrows are to put it politely disgusting
-
Three finger swipe for nav. in finder, chrome etc
I found it easier to navigate using three finger swipe for front and back say in finder or chrome.
Is there a way to do that since after upgrading to lion im unable to swipe left or right except for safari.found it
-
I'm looking for a music player that can skip forward and backwards a few seconds?
I'm looking for a music player app that can skip forward and backwards a few seconds?
MPD rocks, runs here for months without major problems.
The client side is very flexible, you can choose many players:
http://www.musicpd.org/clients.shtml
For X, for console, etc..
Edit:
MPD supports Icecast also, to create streams.
Last edited by mephisto (2007-05-15 14:00:36) -
Forward and backward buttons for a player
Hi all,
this is rakesh. I am trying to make a media player in swings(using media API). But i am not getting functions for forwarding and rewinding a song. so can any one help me by giving any idea about how to write that function. Any idea that is useful for this functions.
thanking u all
Rakesh...If you are using CS4, there is a Command to create a Web Album... this does it automatically for you.
Otherwise, you can create this manually. Say you have 3 pages,
page1.html (is the index page of the album)
page2.html
page3.html
Therefore, using ordinary text links
Home would link to page1.html
Previous would link to page3.html
Next would link to page2.html
You would need to make adjustments naturally to each page as you move along with the gallery pages, changing the previous and the next links as needed. Below is a a basic example of setting up the links in a simple table structure. You would also then style the table layout as you see fit - yes, using css preferably :-)
<table>
<tr>
<td><h2>MY GALLERY OF PHOTOS</h2>
<a href="page3.html">Previous</a> | <a href="index.html">Home</a> | <a href="page2.html">Next</a>
</td>
</tr>
<tr>
<td>
<br>
<a href="../images/img_2401_jpg.jpg"><img src="../images/img_2401_jpg.jpg" border=0></a><br>
</td>
</tr>
</table>
Here's an article on creating an album using the DW Command I mentioned earlier. You could create the album and then copy and paste the code into a current page if you've already designed on.,... not too difficult, I just tested it. You do however, need to have Fireworks to process the images.
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ad1.html
You could also check out the Lightbox effect which is very popular:
http://www.lokeshdhakar.com/projects/lightbox2/
Or do a google search for 'jquery'. There are different album effects using that framework as well.
Hope some of this helps :-)
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap -
Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11?
Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11? Most editing apps--like Final Cut Pro, QuickTime Pro, Avid, etc.--use this convention. I find not having it slows editing down considerably? I don't see it listed in keyboard shortcuts; is there any way to add it? Thanks!
I don't think so. If you click iMovie/Help, you will see a list of all keyboard shortcuts.
Here they are.
Get information
Open iMovie Help
Command-Shift-Question Mark (?)
Open the Project Properties window
Command-J
Open the Project Theme window
Command-Shift-J
Show playhead info
Shows date, time, and keywords for video frames above the playhead.
Command-Y
Import and export
Import from camera
Command-I
Export movie
Command-E
Play video
Play video beginning from the frame beneath the pointer
Space bar
Play 1 second of video total—0.5 seconds before the pointer and 0.5 seconds after
Plays only 0.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Left Bracket ([)
Play three seconds of video total—1.5 seconds before the pointer and 1.5 seconds after
Plays only 1.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Right Bracket (])
Play selection
Slash (/)
Play selected event or project from the beginning
Backslash (\)
In the Event browser, speed up playback from 1x to 2x to 4x by pressing the key one time or two times, respectively
Right Arrow key
In the Event browser, slow down playback from 4x to 2x to 1x by pressing the key one time or two times, respectively
This action works only if you’ve already sped up the playback.
Left Arrow key
When playing Event video, jump forward 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Down Arrow key
When playing Event video, jump back 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Up Arrow key
When playing Event video, jump forward to the next clip
Down Arrow key
When playing Event video, jump to the beginning of the current clip, or jump to the previous clip if the playhead is near the beginning of the current clip
Up Arrow key
Play the selected Event or project full screen
Command-G
Exit full-screen mode
Escape (Esc) key
Move the playhead by one frame
Left Arrow key or Right Arrow key
Freeze the playhead
Hold down Control key
When skimming, keep the cursor in the middle of the row
Option-Shift
Manage projects and events
Create new project
Command-N
Move to Trash
Moves the selected project (in the Project Library), Event (in the Event Library), or Event clip (in the Event browser) to the Trash. If only part of an Event clip is selected, the entire clip is moved to the Trash.
Command-Delete key
Open iMovie preferences
Command-Comma (,)
Page setup
Command-Shift-P
Print selected Event or project filmstrips
Command-P
Select and edit video
Select an entire project or Event clip when a partial clip is selected, or select all project or Event clips when an entire clip is selected
Command-A
Select to playhead
Expands or contracts the selection from the nearest selection border to the playhead.
Shift-A
Deselect all clips
Command-Shift-A
Add selected frames to project
E
Split a clip on both ends of a selection (longer than five frames), or at the playhead position if nothing is selected
Command-Shift-S
Cut selected frames
Command-X
Copy selected frames
Command-C
Paste selected frames
Command-V
Paste all adjustments
Command-Shift-V
Paste video adjustments
Command-Option-I
Paste audio adjustments
Command-Option-A
Paste crop adjustments
Command-Option-R
Paste cutaway, green-screen, or picture-in-picture adjustments
Pastes adjustments, depending on which type of video is selected.
Command-Option-U
Paste video effect -
Rolling start point of an effect forward and backwards?
I downloaded a series of effects plug-ins that I've laid in my timeline. However, I want to change the point at which certain elements within the effect occur. Is there a way to roll the effect forward and backwards within the video beyond where the elements just happen to occur when you drag and drop it into the clip?
The effects I'm working with are "static glitches" and create random occurring distortions. When I lay one in, I sometimes feel that a certain distortion would look better if the whole, pre-designed effect shifted back half a second for instance, but I can't figure out how to do that... Thanks!Thanks for the reply! Is the only way of doing this by splitting the clip? One of the things I specifically need to do is have a distortion that happens later in the effect happen at the beginning of the clip. For instance, I like the distortion that happens three seconds into the effect but the clip itself is only two seconds long. Maybe I could extend the head of clip in another timeline so that it falls on the part of the footage later on that I want and create a compound clip that I then import into my timeline and trim to the appropriate length... but this seems so complicated for and roundabout for a function I feel like FCP X should have but that I'm just not seeing..??
-
How Can Viewers skip forward and backward between timelines!?
You can skip forward and backward through chapters that are on the same timeline but I can't skip backward to a timeline that came before the one I'm on. I thought this was an easy question someone must know the answer to this. I just need to check what I'm saying.
So I have 4 timelines
I put chapter markers at the end of each timeline so that people could skip forward to the next timeline if they wanted to. If there was no chapter marker at the end of the timeline then the timeline would have to be played to completion before going to the next. You would not be able to skip forward at all. The problem I'm having is that you cannot go backward to the timeline that came before.
So if I have a chapter at the end viewers are able to skip forward to the next timeline but they can't skip back.
Alright so Menu Remote settings do not work for Blu-ray discs either so you cannot use that setting to go backward from one timeline to the previous.
Is there anywhere to set that the first chapter of one timeline can somehow link back to the last chapter in a previous timeline or is it just impossible to go backward?
Isn't there anyone who knows how to skip backward from one timeline to the previous? I cannot find a action for this in encore.Hi simonfrommount isa,
I'm sorry to hear you are having issues with the most recent iOS update. If you are still having issues with the connection or controls from your iPhone to your car stereo, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting car stereo connections - Apple Support
Regards,
- Brenden -
I just upgraded my ipad to 6.0. I can no longer expand my audio files so that I can move forwards and backwards. I used to get a diagonal arrow to enlarge the screen and then have a bar that I can move to navigate. Can you help?
Hi James,
I am listening to embedded training files on the Quick Time player (I think). They cannot be copied to protect the information. You only have the option of listening. I used to be able to click on the Q in the audio strip and it would provide a diagonal arrow and this would allow me to expand the bar to a full screen. I then had the bar which would allow me to navigate in case I wanted to listen again or in case I wanted to move forward. After my upgrade, I can no longer expand the strip to a full screen with the adjuster. Now I have not chance to take a break in listening to these audios and most of them are at least an hour long. Thanks for your help. -
What is forward and backward shedule in planning
what is forward and backward shedule in planning ?
and make to orderHi,
Backward scheduling is always carried out for both delivery scheduling and transportation scheduling. If backward scheduling determines a material-availability deadline or transportation-scheduling deadline that lies in the past, the system automatically carries out forward scheduling to determine a delivery deadline that can be confirmed.
Backward Scheduling
The system first carries out backward scheduling from the requested delivery deadline:
Requested delivery deadline
./. minus transit time
Goods issue deadline
Goods issue deadline
./. minus loading time
Loading deadline
Based on the loading deadline, the system determines two further dates, the transportation planning deadline and the material availability deadline.
Loading deadline
./. minus transportation lead time
Transportation scheduling deadline
Loading deadline
./. minus pick/pack time
Material availability deadline
The earlier of these last two dates (material availability deadline and transportation scheduling deadline) determines when a schedule line becomes due for shipping.
Forward Scheduling
If backward scheduling determines a date in the past as the date on which a schedule line becomes due for shipping or if the material will not be available on the date calculated, the system automatically carries out forward scheduling to determine the earliest possible shipping deadline.
For example, starting from the current date, the system calculates the loading deadline, the goods issue deadline, and then the confirmed delivery date. It does this by adding together the shipping times mentioned above
check this link for [MTO|http://help.sap.com/bp_blv1600/V5600/BBLibrary/Documentation/147_Scen_Overview_EN_ID.ppt]
As well pl use the search functionality for regular kind of questions so that you may get lot of info.
regards
sadhu kishore -
Forward and backward pass - network diagram
Does anyone have a .mpt file that allows you to perform forward and backward pass and display the ES, EF, LS, LF, SL in integer values instead the date formats?
Pardon me for bumping in, but I am assuming you want to show the date number for ES, EF etc.
You can with some calculations in Number fields.
For example:
Number1 (Early Start No) = DateDiff("d", [Project Start], [Early Start])
Number2 (Late Start No) - DateDiff("d",[Project Start],[Late Start])
You can continue in the same manner to calculate the number of days between the Project Start and Early Finish and Project start and late finish.
The Total slack field is a numeric value (in days) so no conversion needed.
You can then alter the network diagram view and replace the values as needed with [Number1], [Number2] etc. -
Asymmetric NAT rules matched for forward and reverse flows - NAT Issue
Having a problem with a VPN site trying to communicate to a subnet off my ASA 5505. The network is simple, VPN IPSEC remote site is 192.168.6.0/24 and I can ping and access hosts on 192.168.10.0/24 (called InfraNet). I am now trying to allow communications between 192.168.6.0/24 (called FD_net) to 192.168.9.0/24 (called Inside)
The Error:
5 Nov 12 2012 13:52:50 192.168.9.19 Asymmetric NAT rules matched for forward and reverse flows; Connection for icmp src outside:192.168.6.11 dst inside:192.168.9.19 (type 8, code 0) denied due to NAT reverse path failure
I understand this is a NAT issue; but I not seeing the error and could use a second set of eyes. Here's my current running configuration.
: Saved
ASA Version 8.3(2)
hostname fw1
domain-name xxxxxxxx.xxx
enable password <removed>
passwd <removed>
names
interface Vlan1
description Town Internal Network
nameif inside
security-level 100
ip address 192.168.9.1 255.255.255.0
interface Vlan2
description Public Internet
nameif outside
security-level 0
ip address 173.xxx.xxx.xxx 255.255.255.248
interface Vlan3
description DMZ (CaTV)
nameif dmz
security-level 50
ip address 192.168.2.1 255.255.255.0
interface Vlan10
description Infrastructure Network
nameif InfraNet
security-level 100
ip address 192.168.10.1 255.255.255.0
interface Vlan13
description Guest Wireless
nameif Wireless-Guest
security-level 25
ip address 192.168.1.1 255.255.255.0
interface Vlan23
nameif StateNet
security-level 75
ip address 10.63.198.2 255.255.255.0
interface Vlan33
description Police Subnet
shutdown
nameif PDNet
security-level 90
ip address 192.168.0.1 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport trunk allowed vlan 1,5,10,13
switchport trunk native vlan 1
switchport mode trunk
speed 100
duplex full
interface Ethernet0/2
switchport access vlan 3
interface Ethernet0/3
interface Ethernet0/4
switchport trunk allowed vlan 1,10,13
switchport trunk native vlan 1
switchport mode trunk
interface Ethernet0/5
switchport access vlan 23
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport trunk allowed vlan 1
switchport trunk native vlan 1
switchport mode trunk
shutdown
banner exec Access Restricted to Personnel Only
banner login Access Restricted to Personnel Only
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
dns server-group DefaultDNS
domain-name xxxxxxx.xxx
same-security-traffic permit inter-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object service IMAPoverSSL
service tcp destination eq 993
description IMAP over SSL
object service POPoverSSL
service tcp destination eq 995
description POP3 over SSL
object service SMTPwTLS
service tcp destination eq 465
description SMTP with TLS
object network obj-192.168.9.20
host 192.168.9.20
object network obj-claggett-https
host 192.168.9.20
object network obj-claggett-imap4
host 192.168.9.20
object network obj-claggett-pop3
host 192.168.9.20
object network obj-claggett-smtp
host 192.168.9.20
object network obj-claggett-imapoverssl
host 192.168.9.20
object network obj-claggett-popoverssl
host 192.168.9.20
object network obj-claggett-smtpwTLS
host 192.168.9.20
object network obj-192.168.9.120
host 192.168.9.120
object network obj-192.168.9.119
host 192.168.9.119
object network obj-192.168.9.121
host 192.168.9.121
object network obj-wirelessnet
subnet 192.168.1.0 255.255.255.0
object network WirelessClients
subnet 192.168.1.0 255.255.255.0
object network obj-dmznetwork
subnet 192.168.2.0 255.255.255.0
object network FD_Firewall
host 74.94.142.229
object network FD_Net
subnet 192.168.6.0 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_24
subnet 192.168.10.0 255.255.255.0
object network obj-TownHallNet
subnet 192.168.9.0 255.255.255.0
object network obj_InfraNet
subnet 192.168.10.0 255.255.255.0
object-group service EmailServices
description Normal Email/Exchange Services
service-object object IMAPoverSSL
service-object object POPoverSSL
service-object object SMTPwTLS
service-object tcp destination eq https
service-object tcp destination eq imap4
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_1
service-object object IMAPoverSSL
service-object object POPoverSSL
service-object object SMTPwTLS
service-object tcp destination eq pop3
service-object tcp destination eq https
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_2
service-object object IMAPoverSSL
service-object object POPoverSSL
service-object object SMTPwTLS
service-object tcp destination eq https
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group network obj_clerkpc
description Clerk's PCs
network-object object obj-192.168.9.119
network-object object obj-192.168.9.120
network-object object obj-192.168.9.121
object-group network TownHall_Nets
network-object 192.168.10.0 255.255.255.0
network-object object obj-TownHallNet
object-group network DM_INLINE_NETWORK_1
network-object 192.168.10.0 255.255.255.0
network-object 192.168.9.0 255.255.255.0
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 any interface outside
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any host 192.168.9.20
access-list StateNet_access_in extended permit ip object-group obj_clerkpc any
access-list outside_2_cryptomap extended permit ip object-group DM_INLINE_NETWORK_1 object FD_Net
pager lines 24
logging enable
logging asdm debugging
logging mail errors
logging from-address hostmaster@xxxxxxxxx
logging recipient-address john@xxxxxxxxx level errors
mtu inside 1500
mtu outside 1500
mtu dmz 1500
mtu Wireless-Guest 1500
mtu StateNet 1500
mtu InfraNet 1500
mtu PDNet 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-635.bin
no asdm history enable
arp timeout 14400
nat (InfraNet,outside) source static TownHall_Nets TownHall_Nets destination static FD_Net FD_Net
nat (inside,outside) source static TownHall_Nets TownHall_Nets destination static FD_Net FD_Net
object network obj_any
nat (inside,outside) static interface
object network obj-claggett-https
nat (inside,outside) static interface service tcp https https
object network obj-claggett-imap4
nat (inside,outside) static interface service tcp imap4 imap4
object network obj-claggett-pop3
nat (inside,outside) static interface service tcp pop3 pop3
object network obj-claggett-smtp
nat (inside,outside) static interface service tcp smtp smtp
object network obj-claggett-imapoverssl
nat (inside,outside) static interface service tcp 993 993
object network obj-claggett-popoverssl
nat (inside,outside) static interface service tcp 995 995
object network obj-claggett-smtpwTLS
nat (inside,outside) static interface service tcp 465 465
object network obj-192.168.9.120
nat (inside,StateNet) static 10.63.198.12
object network obj-192.168.9.119
nat (any,StateNet) static 10.63.198.10
object network obj-192.168.9.121
nat (any,StateNet) static 10.63.198.11
object network obj-wirelessnet
nat (Wireless-Guest,outside) static interface
object network obj-dmznetwork
nat (any,outside) static interface
object network obj_InfraNet
nat (InfraNet,outside) static interface
access-group outside_access_in in interface outside
access-group StateNet_access_in in interface StateNet
route outside 0.0.0.0 0.0.0.0 173.166.117.190 1
route StateNet 10.0.0.0 255.0.0.0 10.63.198.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable 5443
http 192.168.9.0 255.255.255.0 inside
http 74.xxx.xxx.xxx 255.255.255.255 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 2 match address outside_2_cryptomap
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer 173.xxx.xxx.xxx
crypto map outside_map 2 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.9.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.9.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd dns 208.67.222.222 208.67.220.220
dhcpd lease 10800
dhcpd auto_config outside
dhcpd address 192.168.2.100-192.168.2.254 dmz
dhcpd dns 8.8.8.8 8.8.4.4 interface dmz
dhcpd enable dmz
dhcpd address 192.168.1.100-192.168.1.254 Wireless-Guest
dhcpd enable Wireless-Guest
threat-detection basic-threat
threat-detection statistics host number-of-rate 2
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 63.240.161.99 source outside prefer
ntp server 207.171.30.106 source outside prefer
ntp server 70.86.250.6 source outside prefer
webvpn
group-policy FDIPSECTunnel internal
group-policy FDIPSECTunnel attributes
vpn-idle-timeout none
vpn-tunnel-protocol IPSec l2tp-ipsec
username support password <removed> privilege 15
tunnel-group 173.xxx.xxx.xxx type ipsec-l2l
tunnel-group 173.xxx.xxx.xxx general-attributes
default-group-policy FDIPSECTunnel
tunnel-group 173.xxx.xxx.xxx ipsec-attributes
pre-shared-key *****
smtp-server 192.168.9.20
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:e4dc3cef0de15123f11439822880a2c7
: end
Any ideas would be appreciated.
JohnI don't see any inspection-commands in your config. Is there a reason for not using any of them?
If your problem is only with ICMP, then you should enable at least icmp-inspection. You can do that easiely with the legacy command " fixup protocol icmp"
Sent from Cisco Technical Support iPad App -
Hi,
I have an ASA5510 running version 8.2(5). I have set up a new network on interface Ethernet0/1.777 of the fwl. The firewall works perfectly with remote access VPNs but has now given me the error with the new network that has been set up:
%ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.159.159.3/49204 dst tru777:10.1.34.19/3389 denied due to NAT reverse path failure
The difference between the other networks and the new one that I have set up is that this is the first one using a private addressing scheme. I understand that NAT is not allowing something along the way but I cant figure out what needs to change in order to get it to work. My config is as follows:
interface Ethernet0/1.777
description TRU 777
vlan 777
nameif tru777
security-level 50
ip address 10.1.34.17 255.255.255.240 standby 10.1.34.18
access-list acl_tru777 remark * ALLOW ALL OUTBOUND *
access-list acl_tru777 extended permit ip any any
access-list RA-VPN extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 10.0.0.0 255.0.0.0
access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 172.16.0.0 255.240.0.0
access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list acl_ra-lock-tru777 extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
access-list acl_ra-lock-tru777 extended permit ip 10.159.159.0 255.255.255.0 10.1.34.16 255.255.255.240
ip local pool ra-pool 10.159.159.0-10.159.159.254 mask 255.255.255.0
nat (tru777) 4 access-list acl_no-nat
nat (tru777) 2 10.1.34.16 255.255.255.240
global (outside) 2 x.x.x.x
crypto isakmp nat-traversal 20
I think that is everything you should need, if not please just ask.
Thank you very much in advance,
ChrisHi Julio,
Here you go:
FWL01# sh nameif
Interface Name Security
Ethernet0/0 outside 0
Ethernet0/1 CLIENTS 50
Ethernet0/1.314 tru01 50
Ethernet0/1.313 dmz01 50
Ethernet0/1.316 tru02 50
Ethernet0/1.776 dmz776 50
Ethernet0/1.777 tru777 50
Management0/0 management 100
FWL01# sh run nat
nat (tru02) 1 192.168.3.0 255.255.255.240
nat (tru777) 4 access-list acl_no-nat
nat (tru777) 2 10.1.34.16 255.255.255.240
FWL01# sh run glob
global (outside) 1 interface
global (outside) 2 x.x.x.x
Thanks,
Chris -
Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws
This sounds like a hardware issue. I haven't seen this particular problem reported before.
Maybe you are looking for
-
IPhoto library Gone! (replaced in just one click w/o ever dragging 2 Trash)
iPhoto library gone / replaced in just one click (w/ o ever dragging anything to the trash)! I currently own multiple PowerMacs all sharing the same high speed local network. All of them run the latest / Mac OS X.4.9 and have multiple HD’s (both inte
-
Error Installing Windows 8.1 on SSD which is in place of macbook pro's SuperDrive
I'm trying to install a regular copy of Windows 8.1 pro on an SSD on a Macbook Pro mid 2010. The SSD has been mounted replacing the old, unused SuperDrive with a support to add another disk. After starting the setup and formatting the disk to be read
-
hii all i have following problem in smartform for invoice printing, i have 2 fields called total_prd_val for product value n RATE for rate pet unit , this 2 fields can hold only one value at a time. now i have invoice which contains 4 diff products o
-
Help. I just returned from a big trip with loads of pictures and when I connected my camera one SanDisk worked great but when I put the other in iPhoto says "no images to import". I can see the images on my camera, though? Any ideas? iMac Mac OS X
-
Why do these insert vary so much in performance?
I have a table and a package similar to those shown in below DDL. Table TABLE1 is populated in chunks of 10000 records from a remote database, thru TABLE1_PKG by receiving arrays of data for three of its fields and a scalar value for a set identifier