Three in one rack mount unit?

Does anyone know if there is any single-space rack-mount unit that could serve the following Does THREE purposes?
1) a Digital firewire I/O (preferably 8 in / 8 out 1/4" or XLR) (don't need spidif or eur/eob or whatever it is.)
2) a simple mixer with volume knobs.
3) a reverb unit similar to lexicons reverb unit.
Thank you so much.

Here's a very nice one...
http://www.focusrite.com/product/SaffirePRO_10_io/
http://www.guitarcenter.com/shop/product/Focusrite-Saffire-PRO-10-IO-8Channel-Mi c-Preamp-With-Firewire-Interface?full_sku=241133
(Do not post a URL unless it directly answers a user's question. If any portion of your Submission, including any posted URL, results in any accrual of compensation or benefit to you, then you must note this in your post by stating, "I may receive some form of compensation, financial or otherwise, from my recommendation or link.")
I will not receive any compensation for suggesting a Focusrite product! However, I have the Saffire. A desktop model. It also has the same features except scaled down to two audio ins (mic/line) and 8 outs, 2 Firewire and EQ, Reverb and Compression plug-ins...got mine for $225.

Similar Messages

ASA5585 - which rack mount?

Sadly dissappointed in the documentation...
I would think that one of these parts would be the rack kit used when eliminating the slide rails to fit the 5585 in a narrow rack as described in the hardware installation guide ( http://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/5585guide/5585Xhw/procedures.html#79288 )
Rack-Mounting the Chassis Using the Fixed Rack Mount
If you are not able to use the slide rail kit in your rack installation, an optional fixed rack mount solution is available. You can install fixed front and rear rack mount brackets on the ASA 5585-X so that you can easily mount it in a rack.
OK, that is what I want, but what part is it? Is it one of the three below? Is it something else?
ASA5585-RAILS=
ASA 5585 Rail kit
ASA5585-REAR-RACK=
ASA 5585-X Rear Rack Mounts (1 pair)
ASA5585-RACK-KIT=
ASA 5585-X Front Rack and Rear Rack Kit
it used to be you could search for a datasheet, but those are now bloated with a bunch of marketing fluff that is not remotely close to being datasheets.

The RAILS part is the standard slide rail kit with the ball bearings etc. that allows the ASA to slide in and out without unmounting.
The REAR-RACK is the little guide pieces that attach to the ASA plus the longer bits that attach to the rack's rear posts to give the unit support on the rear. It's sold separately in case someone started out with the kit below but only used the front hardware and the rear bits went missing if/when they decided they should add them.
The RACK-KIT includes the REAR-RACK pieces plus the big rectangular pieces with ears that attach on the front sides of the ASA and allow you to secure it into your front posts.

Rack mount Kit for ESW500

Hi Team,
Looking that either the rack mount kit for ESW500 is orderable as a spare. I'm not sure if the one for UC520 can fit the ESW500s
ACS-UC500RM-19=
https://supportforums.cisco.com/docs/DOC-9698
Best Regards,
Sohaib

Hi Victor, you're right the separate skus aren't for sale. However, I'd recommend to call the SBSC team. A lot of times, if your product is under warranty, they are able to ship a replacement unit to you then you can remove the rack mount and just return the package. It's worth a shot!
-Tom
Please mark answered for helpful posts

MAudio Delta 1010 PCI Digital Recording Rack Mount and Mac Pro

A great digital audio rack-mount converter is MAudio's Delta 1010. It uses a PCI card for which I heard one could get a replacement PCI-X interface card, but such is not available for PCI-Express slots which are all the Mac Pro workstations have.
Does anybody know of a solution? Perhaps an interface that converts PCI or PCI-X to FireWire, USB, or PCI-Express? In other words, any way at all to make use of equipment for which the manufacturer doesn't supply a Mac Pro'able interface?
(And my apologies if this is just a silly question; I'm not super hip to all the hardware stuff.)
Thanks,
Rich Apple

$2000 US Dollars for the Magma PE6R4 converter (less in Canadian Dollars, of course) would be a pretty high price to pay to save my $800 Delta 1010 audio solution...

2100 rack mount

Does anyone have a part number for a 2100 rack mount kit, cant find it on Cisco anywhere? Is it the same as for the 526 the ACS-UC500RM-19=

Hi,
the Rack-Mount-Kit for the WLC-2100 is the same as the one for the ASA-5505. It's called ASA5505-RACK-MNT=.
Greets,
Sebastian

Rack mount kit for SRW208P?

Hello all -- anybody with 2 x rack mount kits for a SRW208P that they don't want? I need to rack mount these devices but my predecessor very wisely decided to throw them out and Cisco does not sell the racks as a separate SKU. Thanks.
Victor

Hi Victor, you're right the separate skus aren't for sale. However, I'd recommend to call the SBSC team. A lot of times, if your product is under warranty, they are able to ship a replacement unit to you then you can remove the rack mount and just return the package. It's worth a shot!
-Tom
Please mark answered for helpful posts

In sequence container i have three task one task have to made transaction Remaining three task made not transaction

in sequence container i have three task one task have to made transaction Remaining three task made not transaction

Hi hari3109,
Just as Visakh said, we need to set the TransactionOption property of the container to ‘Required’ to enable transaction. The Required value means this container will cause a new transaction to be started unless the parent container already has a transaction,
in which case, the parent’s transaction will be joined. For more details about TransactionOption property, please see:
http://msdn.microsoft.com/en-IN/library/microsoft.sqlserver.dts.runtime.dtstransactionoption.aspx
Besides, we should follow there guidelines to decide whether and how to implement a transaction:
For transactions to be enabled in SSIS, you need to turn on the DTC service, and the tasks that you want to be part of the transaction must work with the DTC service natively.
If a series of tasks must be completed as a single unit, in which either all the tasks are successful and committed or an error occurs and none of the tasks are committed, then place the tasks within a Sequence Container, and then set the TransactionOption
property of the container to Required.
A task can inherit the transaction setting of its parent when the TransactionOption property is set to Supported, which is the default setting when creating a task or container.
You can prevent a task from participating in a transaction by setting its TransactionOp-tion setting to NotSupported.
Transactions work at the control flow level and not within a data flow. This means that you can turn on a transaction for a data flow task, but you cannot turn it on separately for selected components within the data flow; either the entire data process
will be successful or it will be rolled back.
For more information about Configuring Package Transactions in SSIS, please refer to the following document:
http://msdn.microsoft.com/en-us/library/cc304421.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

2000 Wireless Controller Rack Mount

I read it somewhere on a Cisco link that the controller is supposed to ship with the rack mount kit. However, the box it came in did not have one in it. Did anyone experience the same?

i had a similar problem last week. you need to donwload the latest firmware for the controller. i called the tac and they had me download the latest firmware and that took care of it. personally, i can't believe they would ship such a poor firmware, but that appears to be the problem.
good luck.

Need help to join two tables using three joins, one of which is a (between) date range.

I am trying to develop a query in MS Access 2010 to join two tables using three joins, one of which is a (between) date range. The tables are contained in Access. The reason
the tables are contained in access because they are imported from different ODBC warehouses and the data is formatted for uniformity. I believe this cannot be developed using MS Visual Query Designer. I think writing a query in SQL would be suiting this project.
ABCPART links to XYZPART. ABCSERIAL links to XYZSERIAL. ABCDATE links to (between) XYZDATE1 and ZYZDATE2.
[ABCTABLE]
ABCORDER
ABCPART
ABCSERIAL
ABCDATE
[ZYXTABLE]
XYZORDER
XYZPART
XYZSERIAL
XYZDATE1
XYZDATE2

Thank you for the looking at the post. The actual table names are rather ambiguous. I renamed them so it would make more sense. I will explain more and give the actual names. What I do not have is the actual data in the table. That is something I don't have
on this computer. There are no "Null" fields in either of the tables.
This table has many orders (MSORDER) that need to match one order (GLORDER) in GLORDR. This is based on MSPART joined to GLPART, MSSERIAL joined to GLSERIAL, and MSOPNDATE joined if it falls between GLSTARTDATE and GLENDDATE.
[MSORDR]
MSORDER
MSPART
MSSERIAL
MSOPNDATE
11111111
4444444
55555
2/4/2015
22222222
6666666
11111
1/6/2015
33333333
6666666
11111
3/5/2015
This table has one order for every part number and every serial number.
[GLORDR]
GLORDER
GLPART
GLSERIAL
GLSTARTDATE
GLENDDATE
ABC11111
444444
55555
1/2/2015
4/4/2015
ABC22222
666666
11111
1/5/2015
4/10/2015
AAA11111
555555
22222
3/2/2015
4/10/2015
Post Query table
GLORDER
MSORDER
GLSTARTDATE
GLENDDATE
MSOPNDATE
ABC11111
11111111
1/2/2015
4/4/2015
2/4/2015
ABC22222
22222222
1/5/2015
4/10/2015
1/6/2015
ABC22222
33333333
1/5/2015
4/10/2015
3/5/2015
This is the SQL minus the between date join.
SELECT GLORDR.GLORDER, MSORDR.MSORDER, GLORDR.GLSTARTDATE, GLORDR.GLENDDATE, MSORDR.MSOPNDATE
FROM GLORDR INNER JOIN MSORDR ON (GLORDR.GLSERIAL = MSORDR.MSSERIAL) AND (GLORDR.GLPART = MSORDR.MSPART);

Rack mount kits doesn't fit the depth of Agilent rack

I have a PXI 1085 Chassis which I want to mount in an Agilent rack. I purchased the front and rear rack mount kits, the height and width are great, but the depth of my rack doesn’t allow me to use both the front and rear rack mount kits. Is there some kind of adapter I can buy which will extend the rear rack mount so that it can reach the back?

Hi Chall,
Unfortuantely we only offer the kits for a certain size range. If this does not fit your rack then you will have to create a custom rack mount.
Regards,
Kaitlin N.
National Instruments
Applications Engineer

Can I use one Apple TV unit to distribute content to two TV's?

Can I use one Apple TV unit to distribute content to two TV's? If so, how?
I want to be able to purchase movies off of the iTunes store on both TV's and to display photos and listen to music.
Thank you for looking.

Apple TV is designed to display content on a single TV only. Although it has component and HDMI outputs they are not independent and, as has been pointed out already, HDMI will take precedence over the component video.
You will need two Apple TVs, one for each TV, and you can then sync both with one computer either with the same content or with different content selected from a common library in iTunes..
Hope this helps.

Mainboard doesn't fit into 1U rack-mount casing

It seems that all current design for Intel 865 Chipset and above have the audio head higher than the height of a 1U rack-mount casing thus it makes it difficult to build entry level server with them. Older designs (845) have the audio head flat thus is not affected. Hope MSI look into this.

they sell rack mount server boards but they are not cheap
http://www.msi.com.tw/program/products/server/svr/pro_svr_list.php?kind=3&CHIP=14&NAME=Rackmount%20Server

T4-1 rack mount server as a remote server for disaster recovery setup.

Hi,
I would like to ask some basic questions, as Solaris is not my area.
1)
T4-1 server is a rack mount server. Now, we would like to use it for DR purpose. Can we keep this rack mount server on remote location without conversion kit (to use it as a tower server).
2)
As I am new to this, would like to ask a basic question. This T4-1 server has 4 * 300GB hdd. To expand storage capacity, we would like to add hard disks to this server. Do we have to add 300gb hard disks only ? or we can add 2 new 600 GB hard disks.
Thanks

1) Yes, it does not need to be racked to run. Putting it on a wire rack should work fine. Just verify the power and cooling requirements.
2) You can add new internal disks, the system holds up to 8 internal 2.5" disks. Using a zpool, I would consider adding 4 more 600G disks for a RAIDZ pool, though you can add 2 600G disks and mirror them.
Erik

MCS-7835H3-OFFER= Is a rack mounting kit included?

I have a customer who is getting their MCS7835H2-DMM51K9 server replaced with a MCS-7835H3-OFFER=
All I need to know is, does the MCS-7835H3-OFFER= come with a rack mounting kit or not? If not, could the existing MCS7835H2-DMM51K9 server's rails be reused?
I'm assuming that it's the same chassis but with a faster processor and more mem/disk and would be a straight swap but can anyone clarify if this "H3" part number comes with a rack mount kit?
Thanks,
DR

All currently shipping Cisco MCS 7800 servers include a “generic/third-party rail kit”.
● Compliant with 19-inch Industry-standard EIA-310D
● Depth range of the slides is from 440mm to 790mm
● Threaded racks: M6, 10-32, and 12-24
● Also enables punched round and square hole racks
Cisco Unified Communications Solutions Ordering Guide
Page 64
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf

What is part number number for 19" rack mount on 526 controller

I am looking for part number for the rack mount kit for a 526 conbtroller - nono is listed on the price sheet

Check out this discussion:
https://supportforums.cisco.com/message/3077633#3077633
Marcos

Three in one rack mount unit?

Similar Messages

Maybe you are looking for